Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CARRIER MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Radio Science Measurements with Suppressed Carrier

Radio Science started when it became apparent with early Solar missions that occultations by planetary atmospheres would affect the quality of radio communications. Since then the atmospheric properties and other aspects of planetary science, solar science, and fundamental physics were studied by scientists. Radio Science data was always extracted from a received pure residual carrier (without data modulation). For some missions, it is very desirable to obtain Radio Science data from a suppressed carrier modulation. In this paper we propose a method to extract Radio Science data when a coded suppressed carrier modulation is used in deep space communications. Type of modulation can be BPSK, QPSK, OQPSK, MPSK or even GMSK. However we concentrate mostly on BPSK modulation. The proposed method for suppressed carrier simply tries to wipe out data that acts as an interference for Radio Science measurements. In order to measure the estimation errors in amplitude and phase of the Radio Science data we use Cramer-Rao bound (CRB). The CRB for the suppressed carrier modulation with non-ideal data wiping is then compared with residual carrier modulation under the same noise condition. The method of derivation of CRB for non-ideal data wiping is an innovative method that presented here. Some numerical results are provided for coded system.

Cramer-Rao bound↗
NASA NTRS1984

Effect of RF Filtering on the Performance of Uncoded PCM/PM Telemetry Channels

A method for calculating the increase in received telemetry signal power required to compensate for the use of a radio frequency interference (RFI) filter in front of the DSN receiving system low-noise amplifier is described. The telemetry system for which the degradation is calculated is an uncoded PCM/PM system in which the NRZ data directly modulates the carrier at a modulation level which leaves a discrete carrier. A phase-locked loop in the RF receiver tracks the discrete carrier and coherently demodulates the PCM data. The RFI filter may be a series of Butterworth, Tchebychev, or Bessel low-pass, high-pass, band-pass, or band-reject filters, each with arbitrary bandwidth, number of poles, and, for band-pass or band-reject filters, resonant frequency. The only restriction is that the RFI filter must have only simple poles. Numerical results are presented for the RFI filters the DSN plans to place in front of the S-band FET, S-band maser, and X-band maser low noise amplifiers. The main conclusion is that the filters will produce negligible degradation at data rates below 4 Mbps.

Koerner, M. A.↗
DOE OSTI2019

Monitoring Electron–Phonon Interactions in Lead Halide Perovskites Using Time-Resolved THz Spectroscopy

Lead halide perovskite semiconductors have low-frequency phonon modes within the lead halide sublattice and thus are considered to be soft. The soft lattice is considered to be important in defining their interesting optoelectronic properties. Electron-phonon coupling governs hot-carrier relaxation, carrier mobilities, carrier lifetimes, among other important electronic characteristics. Directly observing the interplay between free charge carriers and phonons can provide details on how phonons impact these properties (e.g., exciton populations and other collective modes). Here, we observe a delicate interplay among carriers, phonons, and excitons in mixed-cation and mixed-halide perovskite films by simultaneously resolving the contribution of charge carriers and phonons in time-resolved terahertz photoconductivity spectra. We are able to observe directly the increase in phonon population during carrier cooling and discuss how thermal equilibrium populations of carriers and phonons modulate the carrier transport properties, as well as reduce the population of carriers within band tails. We are also able to observe directly the formation of free charge carriers when excitons interact with phonons and dissociate and to describe how free carriers and exciton populations exchange through phonon interactions. Finally, we also time-resolve how the carriers are screened via the Coulomb interaction at low and room temperatures. Our studies shed light on how charge carriers interact with the low-energy phonons and discuss implications.

14 SOLAR ENERGY↗
DOE OSTI2024

Redox gating-induced modulation of charge carrier density and lattice expansion in LaNiO 3 thin films

Redox gating involves the use of reversible redox functionalities combined with ionic electrolytes to substantially alter the charge carrier density in functional condensed materials. This modification leads to the emergence of physical properties not observed in the original material. Here, in our study, we focus on redox gating applied to a LaNiO 3 (001) film within a field-effect device and identify a critical gate voltage of 0.7 V. Hall measurements indicate that redox gating markedly increases the charge carrier density in LaNiO 3 , reaching over 10 14 cm −2 . This increase is primarily due to the injection of electrons into LaNiO 3 , which offsets the existing hole carriers. These adjustments in the carrier concentration result in reversible lattice expansion in LaNiO 3 when gate voltages are below 0.7 V. This expansion correlates well with theoretical models that consider adjustments to the Ni–O bond length, influenced by oxygen ligand holes. Conversely, at gate voltages above 0.7 V, there are significant changes in resistivity, lattice structure, and Ni valence, stemming from the formation of oxygen vacancies in the LaNiO 3 film.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Optical communication channel simulator system

Optical transmission link is simulated by positioning linear optical modulator between optical carrier source and receiver for carrier. Optical modulator is driven by analog signal, derived from analog computer circuit, having random variations indicative of characteristics of transmission link.

Fitzmaurice, M. W.↗
DOE OSTI2014

Automated cassette-to-cassette substrate handling system

An automated cassette-to-cassette substrate handling system includes a cassette storage module for storing a plurality of substrates in cassettes before and after processing. A substrate carrier storage module stores a plurality of substrate carriers. A substrate carrier loading/unloading module loads substrates from the cassette storage module onto the plurality of substrate carriers and unloads substrates from the plurality of substrate carriers to the cassette storage module. A transport mechanism transports the plurality of substrates between the cassette storage module and the plurality of substrate carriers and transports the plurality of substrate carriers between the substrate carrier loading/unloading module and a processing chamber. A vision system recognizes recesses in the plurality of substrate carriers corresponding to empty substrate positions in the substrate carrier. A processor receives data from the vision system and instructs the transport mechanism to transport substrates to positions on the substrate carrier in response to the received data.

47 OTHER INSTRUMENTATION↗
NASA NTRS1995

Mixed Carrier Conduction in Modulation-doped Field Effect Transistors

The contribution of more than one carrier to the conductivity in modulation-doped field effect transistors (MODFET) affects the resultant mobility and complicates the characterization of these devices. Mixed conduction arises from the population of several subbands in the two-dimensional electron gas (2DEG), as well as the presence of a parallel path outside the 2DEG. We characterized GaAs/AlGaAs MODFET structures with both delta and continuous doping in the barrier. Based on simultaneous Hall and conductivity analysis we conclude that the parallel conduction is taking place in the AlGaAs barrier, as indicated by the carrier freezeout and activation energy. Thus, simple Hall analysis of these structures may lead to erroneous conclusions, particularly for real-life device structures. The distribution of the 2D electrons between the various confined subbands depends on the doping profile. While for a continuously doped barrier the Shubnikov-de Haas analysis shows superposition of two frequencies for concentrations below 10(exp 12) cm(exp -2), for a delta doped structure the superposition is absent even at 50% larger concentrations. This result is confirmed by self-consistent analysis, which indicates that the concentration of the second subband hardly increases.

Schacham, S. E.↗
NASA NTRS1977

Pseudo noise code and data transmission method and apparatus

Pseudo noise ranging codes, having a predetermined chipping rate, and a pair of binary data sources, each having a bit rate no greater than one tenth the chipping rate, quadriphase, digitally modulate a suppressed carrier wave having a first frequency are examined. Two additional binary data sources, each having a bit rate that is not restricted by the chipping rate of the first carrier, quadriphase, digitally modulate a suppressed carrier wave having a second frequency. The first and second frequencies are only slightly displaced so that there is overlap in the frequency bands which modulate the two carriers. The two suppressed carrier waves are linearly combined and transmitted from a first station to a second station so that the amplitude of the transmitted first wave is controlled so as not to degrade the detectability of the second wave at the second station.

Deerkoski, L. F.↗
DOE OSTI2019

Communication device and method of making the same

A communication device for receiving an interrogation signal at a first carrier frequency and for transmitting a response signal at a second carrier frequency is disclosed. The interrogation signal comprises the first carrier frequency modulated at the second carrier frequency. The communication device includes a sensor coupled to a demodulator. The sensor receives a low frequency input used to further modulate the interrogation signal. The demodulator demodulates the low frequency input from the first carrier frequency to thereby generate the response signal comprising the second carrier frequency and the low frequency input. The demodulator preferably includes a pyroelectric demodulator, a piezoelectric demodulator, or a detector diode. The demodulator preferably has a frequency response less than the first carrier frequency but greater than the second carrier frequency.

42 ENGINEERING↗
DOE OSTI2021

Dual frequency transceiver device

A transceiver device for receiving an interrogation signal at a first carrier frequency and for transmitting a response signal at a second carrier frequency is disclosed. The interrogation signal comprises the first carrier frequency modulated at the second carrier frequency. The communication device includes a sensor coupled to a demodulator. The sensor receives a low frequency input used to further modulate the interrogation signal. The demodulator demodulates the low frequency input from the first carrier frequency to thereby generate the response signal comprising the second carrier frequency and the low frequency input. The demodulator preferably includes a pyroelectric demodulator, a piezoelectric demodulator, or a detector diode. The demodulator preferably has a frequency response less than the first carrier frequency but greater than the second carrier frequency.

Brocato, Robert W.↗
NASA NTRS1990

Utilization of the Spacehab module as a microgravity carrier

Spacehab Incorporated has proposed the use of its mid-deck augmentation module as a near term microgravity test bed. The orbital flight dynamics and payload accommodation capabilities of a Space Shuttle with the Spacehad module were investigated to assess this proposal. It was found that the module will provide a 1 microG (32.2 x 10(exp 6) ft/sq sec) quasi-steady state environment for limited periods of time when the shuttle is actively controlled. A passively stable attitude will provide a 4 microG environment for longer periods. Shuttle imposed constraints on the composite payload center of gravity, however, severely limit the possibilities for co-manifesting additional payloads. The analysis leading to those conclusions are detailed.

Sasamoto, Washito A.↗
NASA NTRS1991

Emergency locating transmitter

A transmitter generates three signals for sequential transmission. These signal are an unmodulated r.f. carrier, a r.f. carrier amplitude modulated by a first audio frequency waveform and a r.f. carrier amplitude modulated by a second audio frequency waveform which is distinguishable from the first and which may be employed as a means for identifying a particular transmitter. The composite, sequentially transmitted signal may be varied in terms of the individual signal transmission sequence, the duration of the individual signals, overall composite signal repetition rate and the frequency of the second audio waveform. Various combinations of signal variations may be employed to transmit different information.

Wren, Paul E.↗
NASA NTRS1975

Wideband phase modulator works directly on carrier

Multiplier-induced problems related to undesirable effects of the varactor multiplier on the modulation spectrum are eliminated in a modulator circuit which operates directly at the desired output frequency. The principles of operation of the new circuit are discussed and attention is given to requirements for high-Q components and the possibility of linear frequency deviation.

Rippy, R. R.↗
DOE OSTI2017

Measurement of Relaxation Time of Excess Carriers in Si and CIGS Solar Cells by Modulated Electroluminescence Technique

Excess carrier lifetime plays a crucial role in determining the efficiency of solar cells. In this paper, we use the frequency dependence of inphase and quadrature components of modulated electroluminescence (MEL) to measure the relaxation time (decay) of excess carriers. The advantage of the MEL technique is that the relaxation time is obtained directly from the angular frequency at which the quadrature component peaks. It does not need knowledge of the material parameters like mobility, etc., and can be used for any finished solar cells which have detectable light emission. The experiment is easy to perform with standard electrical equipment. For silicon solar cells, the relaxation time is dominated by recombination and hence, the relaxation time is indeed the excess carrier lifetime. In contrast, for the CIGS solar cells investigated here, the relaxation time is dominated by trapping and emission from shallow minority carrier traps.

14 SOLAR ENERGY↗
DOE OSTI2016

Field Effect Optoelectronic Modulation of Quantum-Confined Carriers in Black Phosphorus

We report measurements of the infrared optical response of thin black phosphorus under field-effect modulation. Here, we interpret the observed spectral changes as a combination of an ambipolar Burstein-Moss (BM) shift of the absorption edge due to band-filling under gate control, and a quantum confined Franz-Keldysh (QCFK) effect, phenomena that have been proposed theoretically to occur for black phosphorus under an applied electric field. Distinct optical responses are observed depending on the flake thickness and starting carrier concentration. Transmission extinction modulation amplitudes of more than two percent are observed, suggesting the potential for use of black phosphorus as an active material in mid-infrared optoelectronic modulator applications.

36 MATERIALS SCIENCE↗