Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BRAZIL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Doppler RAdar Observations of Convection from the NASA/TOGA C-band Radar During TRMM-LBA in Rondonia, Brazil

The Tropcial RAinfall Measuring Mission-Large Scale Biosphere-Atmosphere experiment in Amazonia (TRMM-LBA) was conducted near Ji Parana, Rondonia, Brazil during the 1999 Amazonian wet season (Jan-Feb). TRMM-LBA provided detailed observations of precipitating systems from surface and aircraft instrumentation which may be compared to measurements from the TRMM satellite. The surface-based platforms included two scanning Doppler radars (the NASA TOGA C-band radar and the NCAR SPOL S-band dual polarization radar) which collected continuous dual-Doppler measurements of precipitating convection.This paper focuses on data from the TOGA radar to provide a preliminary overview of general properties of convective organization observed during TRMM-LBA. These include squall line evolution and morphology, diurnal variation of precipitation, and the vertical intensity of convection. Mesoscale squall lines were most commonly observed in the afternoon, with associated regions of stratiform precipitation persisting into the evening. Nocturnal widespread stratiform rain often formed before sunrise, with no apparent source region of deep convection and very weak radar bright band. Reflectivity values in deep convective cells typically decreased rapidly above the melting level, reminiscent of tropical oceanic convection, and consistent with the relative scarcity of lightning (with respect to other tropical continental regions). Vertically developed electrified convection, though infrequent, did occur regularly.

Rickenbach, T. M.↗
NASA NTRS2000

A TRMM-Calibrated Infrared Rainfall Algorithm Applied Over Brazil

The development of a satellite infrared technique for estimating convective and stratiform rainfall and its application in studying the diurnal variability of rainfall in Amazonia are presented. The Convective-Stratiform. Technique, calibrated by coincident, physically retrieved rain rates from the Tropical Rain Measuring Mission (TRMM) Microwave Imager (TMI), is applied during January to April 1999 over northern South America. The diurnal cycle of rainfall, as well as the division between convective and stratiform rainfall is presented. Results compare well (a one-hour lag) with the diurnal cycle derived from Tropical Ocean-Global Atmosphere (TOGA) radar-estimated rainfall in Rondonia. The satellite estimates reveal that the convective rain constitutes, in the mean, 24% of the rain area while accounting for 67% of the rain volume. The effects of geography (rivers, lakes, coasts) and topography on the diurnal cycle of convection are examined. In particular, the Amazon River, downstream of Manaus, is shown to both enhance early morning rainfall and inhibit afternoon convection. Monthly estimates from this technique, dubbed CST/TMI, are verified over a dense rain gage network in the state of Ceara, in northeast Brazil. The CST/TMI showed a high bias equal to +33% of the gage mean, indicating that possibly the TMI estimates alone are also high. The root mean square difference (after removal of the bias) equaled 36.6% of the gage mean. The correlation coefficient was 0.77 based on 72 station-months.

Negri, A. J.↗
NASA NTRS2001

A TRMM-Calibrated Infrared Rainfall Algorithm Over Brazil

An improved version of the Convective/Stratiform Technique (CST) and its application over Brazil are presented. Keeping the major components of traditional CST, we have modified the scheme for classing convective and stratiform rainfall and tested various schemes to eliminate non-raining cirrus clouds. The parameters of the technique are calibrated using Tropical Rainfall Measuring Mission (TRMM) multi-sensor observations, including TMI, PR and Visible Infrared Scanner (VIRS). This technique takes advantage of the high temporal sampling rate of geosynchronous infrared channel and the better instantaneous rain observation of TRMM Microwave Imager (TMI) and PR. Moreover, sparse TMI rain estimates are used to dynamically calibrate the parameters of the technique to improve its performance. The technique is applied to make rainfall estimates on various time scales and to study rainfall statistics such as the distributions of rain intensity and storm duration over a four-month period beginning January 1999. The study period coincides with the TRMM/Large-Scale Biosphere-Atmosphere experiment in Amazonia (LBA) ground validation experiment, and observations from the LBA radar are used to validate the technique. Results show the mean diurnal cycle of precipitation over the LBA area, and are compared to radar data from the Tropical Oceans and Global Atmosphere (TOGA) radar. When the larger geographic region is considered, the analysis of the mean hourly estimates revealed the pronounced effects of rivers, topography and local circulations on the rainfall.

Negri, Andrew J.↗
NASA NTRS2001

Precipitation-Lightning Relationships on a Global Basis and a Study of Tropical Continental Convection in TRMM Brazil

This report is concerned with a summary of work completed under NASA Grant NAG5-4778 entitled: "Precipitation-Lightning Relationships on a Global Basis", with a supplement entitled: "A Study of Tropical Continental Convection in TRMM/Brazil". Several areas of endeavor are summarized, some of them concerned directly with the observations from the TRMM satellite, and others focussing on ground based measurements in the NASA TRMM LBA field program in Brazil.

Williams, Earle R.↗
NASA NTRS1995

Brazil Fire Characterization and Burn Area Estimation Using the Airborne Infrared Disaster Assessment (AIRDAS) System

Remotely sensed estimations of regional and global emissions from biomass combustion have been used to characterize fire behavior, determine fire intensity, and estimate burn area. Highly temporal, low resolution satellite data have been used to calculate estimates of fire numbers and area burned. These estimates of fire activity and burned area have differed dramatically, resulting in a wide range of predictions on the ecological and environmental impacts of fires. As part of the Brazil/United States Fire Initiative, an aircraft campaign was initiated in 1992 and continued in 1994. This multi-aircraft campaign was designed to assist in the characterization of fire activity, document fire intensity and determine area burned over prescribed, agricultural and wildland fires in the savanna and forests of central Brazil. Using a unique, multispectral scanner (AIRDAS), designed specifically for fire characterization, a variety of fires and burned areas were flown with a high spatial and high thermal resolution scanner. The system was used to measure flame front size, rate of spread, ratio of smoldering to flaming fronts and fire intensity. In addition, long transects were flown to determine the size of burned areas within the cerrado and transitional ecosystems. The authors anticipate that the fire activity and burned area estimates reported here will lead to enhanced information for precise regional trace gas prediction.

Brass, J. A.↗
NASA NTRS1999

Brazil ALDF System Error Analysis

In a cooperative effort among: the Global Hydrology Climate Center (GHCC) of NASA's Marshal Space Flight Center (MSFC), the Atmospheric Electric Group of the Brazilian National Institute of Space Research, the University of San Paulo (USP), and the Brazilian National Institute of Meteorology (INME), a network of four lightning detectors has been established in Brazil's Rhondonian region. This paper surveys the efforts of GHCC researchers to develop algorithms and field procedures which reliable determine lightning strike locations based on site data comprised of the signal time of arrival, and radiated electromagnetic field.

Rompala, John T.↗
NASA NTRS2004

3D Cloud Radiative Effects on Aerosol Optical Thickness Retrievals in Cumulus Cloud Fields in the Biomass Burning Region in Brazil

Aerosol amount in clear regions of a cloudy atmosphere is a critical parameter in studying the interaction between aerosols and clouds. Since the global cloud cover is about 50%, cloudy scenes are often encountered in any satellite images. Aerosols are more or less transparent, while clouds are extremely reflective in the visible spectrum of solar radiation. The radiative transfer in clear-cloudy condition is highly three- dimensional (3D). This paper focuses on estimating the 3D effects on aerosol optical thickness retrievals using Monte Carlo simulations. An ASTER image of cumulus cloud fields in the biomass burning region in Brazil is simulated in this study. The MODIS products (i-e., cloud optical thickness, particle effective radius, cloud top pressure, surface reflectance, etc.) are used to construct the cloud property and surface reflectance fields. To estimate the cloud 3-D effects, we assume a plane-parallel stratification of aerosol properties in the 60 km x 60 km ASTER image. The simulated solar radiation at the top of the atmosphere is compared with plane-parallel calculations. Furthermore, the 3D cloud radiative effects on aerosol optical thickness retrieval are estimated.

Wen, Guo-Yong↗
NASA NTRS2020

Potential of GPM IMERG Precipitation Estimates to Monitor Natural Disaster Triggers in Urban Areas: the Case of Rio deJaneiro, Brazil

Extreme rainfall can be a catastrophic trigger for natural disaster events at urban scales. However, there remains large uncertainties as to how satellite precipitation can identify these triggers at a city scale. The objective of this study is to evaluate the potential of satellite-based rainfall estimates to monitor natural disaster triggers in urban areas. Rainfall estimates from the Global Precipitation Measurement (GPM) mission are evaluated over the city of Rio de Janeiro, Brazil, where urban floods and landslides occur periodically as a result of extreme rainfall events. Two rainfall products derived from the Integrated Multi-satellite Retrievals for GPM (IMERG), the IMERG Early and IMERG Final products, are integrated into the Noah Multi-Parameterization (Noah-MP) land surface model in order to simulate the spatial and temporal dynamics of two key hydrometeorological disaster triggers across the city over the wet seasons during 2001-2019. Here, total runoff (TR) and rootzone soil moisture (RZSM) are considered as flood and landslide triggers, respectively. Ground-based observations at 33 pluviometric stations are interpolated, and the resulting rainfall fields are used in an in-situ precipitation-based simulation, considered as the reference for evaluating the IMERG-driven simulations. The evaluation is performed during the wet seasons (November-April), when average rainfall over the city is 4.4mm/day. Results show that IMERG products show low spatial variability at the city scale, generally overestimate rainfall rates by 12-35%, and impacts on TR and RZSM vary spatially mostly as a function of land cover and soil types. Results based on statistical and categorical metrics show that IMERG skill in detecting extreme events is moderate, with IMERG Final performing slightly better for most metrics. By analyzing two recent storms, we observe that IMERG detects mostly hourly extreme events, but underestimates rainfall rates, resulting in underestimated TR and RZSM. An evaluation of normalized time series using percentiles shows that both satellite products have significantly improved skill in detecting extreme events when compared to the evaluation using absolute values, indicating that IMERG precipitation could be potentially used as a predictor for natural disasters in urban areas.

IMERG↗
NASA NTRS2021

Brazil is in water crisis–it needs a drought plan

To avoid crop failures and soaring power costs, Brazil needs to diversify sources, monitor soil moisture, model local hydroclimate dynamics and treat water as a national security priority.

Augusto Getirana↗
NASA NTRS2021

Geospatial Cluster Analysis of the State, Duration and Severity of Drought Over Paraíba State, Northeastern Brazil

Droughts threaten water resources, agriculture, socio-economic activities and the population at the global and regional level, so identifying areas with homogeneous drought behaviors is an important consideration in improving the management of water resources. The objective of this study is to identify homogenous zones over Paraíba State in relation to the state, duration and severity of droughts that have occurred over the last 20 years (1998–2017) using hierarchical cluster analysis based on both gauge-measured and Tropical Rainfall Measuring Mission (TRMM) estimated rainfall data (TMPA 3B42). The drought series were calculated using the Standardized Precipitation Index (SPI) based on eight time scales and were grouped according to drought state, duration and severity time series. The integrated results of state, duration and severity of droughts indicate that there is a basis for dividing Paraíba State into two major regions (a) Zone I, formed by Mata Paraibana and Agreste Paraibano, and (b) Zone II, composed by Borborema and Sertão Paraibano. This division is evident when assessing short-term droughts, but in the case of long-term droughts, Paraíba State has a high similarity in terms of drought state, duration, and severity. Factors such as proximity to the ocean, active climatic systems, and the local relief configuration were identified as influencing the drought regime. Finally, it is concluded that TMPA rainfall estimates represent a valuable source of data to regionalize and identify drought patterns over this part of Brazil and that other studies of this type should be carried out to monitor these phenomena based on other satellite-based rainfall data, including the Global Precipitation Mission (GPM).

SPI↗
NASA NTRSDate not supplied

Characterizing the Impact of Equatorial Plasma Bubbles on GNSS Accuracy for Crop Yield Estimation in Brazil with NASA GOLD Data

In Brazil, equatorial plasma bubbles are the primary space weather phenomenon impacting the performance of Global Navigation Satellite Systems (GNSS), causing signal disruptions and positional inaccuracies in agricultural machinery used for mapping fields, guiding machinery, and ensuring accurate planting, spraying, and harvesting. As a result, farmers and stakeholders face challenges in maintaining accurate operational capabilities, often needing to shut down machinery to mitigate these effects. This project evaluated the feasibility of using NASA’s Heliophysics observations for a case study in March 2024. Data from NASA's Global-scale Observations of the Limb and Disk (GOLD) instrument were used to characterize equatorial plasma bubbles, while amplitude and phase indices from ground-based GNSS receivers confirmed their presence and impact on signal disruptions. Additionally, data from a local farm's rover receiver assessed the practical implications of these disruptions on Real-Time Kinematic (RTK) GNSS-based operations by calculating the 2-dimensional error. The project involved collaboration across multiple different organizations and sectors, including NASA’s Crustal Dynamics Data Information System (CDDIS) researchers, John Deere, a Brazilian farm for data acquisition, and Brazilian universities for data interpretation. The results aim to inform Brazilian farmers about position errors affecting their precision agriculture operations and provide insights into the needs of space weather data users and modeling. Lessons from this case study will guide future integration of space weather data and modeling with end users.

Melissa Marquez↗
DOE OSTI2019

Heavy Metal Accumulation in the Intestinal Tapeworm Proteocephalus macrophallus Infecting the Butterfly Peacock Bass (Cichla ocellaris), from Southeastern Brazil

Here we evaluate the potential of heavy metal accumulation of Proteocephalus macrophallus parasitizing the Butterfly Peacock Bass (Cichla ocellaris). A total of 19 fish specimens were collected. From the hosts, samples of intestine, liver, muscle, and parasites were taken. Heavy metal concentrations (Al, As, Ba, Cd, Cr, Fe, Hg, Mg, Mn, Ni, Pb, Ti, and Zn) were obtained using Atomic Absorption Spectrometry. All analyzed elements was found in higher concentrations in the parasites comparing to its host tissues. The bioconcentration factors were higher in the intestine, varying between 5.91 (Ti) to 8.00 (Ba), followed by the muscle, 1.88 (Mg) to 6.39 (Zn), and liver, 1.67 (Al) to 2.02 (Ba). These results show that at the infection site heavy metal concentrations are reduced, since the elements are absorbed directly from the intestinal wall by the parasites. In general, P. macrophallus presents a reasonable capacity of metal accumulation comparing to its hosts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

An evaluation of a risk-based environmental regulation in Brazil: Limitations to risk management of hazardous installations

The environmental regulation of hazardous projects with risk-based decision-making processes can lead to a deficient management of human exposure to technological hazards. Such an approach for regulation is criticized for simplifying the complexity of decisions involving the economic, social, and environmental aspects of the installation and operation of hazardous facilities in urban areas. Results of a Brazilian case study indicate that oil and gas transmission pipelines may represent a threat to diverse communities if the relationship between such linear projects and human populations is overlooked by regulatory bodies. Results also corroborate known challenges to the implementation of EIA processes and outline limitations to an effective environmental and risk management. Two preliminary topics are discussed to strengthen similar regulatory practices. Firstly, an effective integration between social impact assessment and risk assessment in EIA processes to have a more comprehensive understanding of the social fabric. Secondly, the advancement of traditional management practices for hazardous installations to pursue a strong transition from assessment and evaluation to management and control and to promote an effective interaction between land-use planning and environmental regulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Development blind spots and environmental impact assessment: Tensions between policy, law and practice in Brazil's Xingu river basin

This paper explores the tensions involved in Environmental Impact Assessments (EIAs) and environmental licensing through a detailed analysis of the legal disputes and public contestations surrounding two projects, a large hydroelectric dam and a gold mine, which are proximately located to each other. Broadly, we argue that EIAs may function to reinforce rather than genuinely inform or potentially resist prevailing developmental logics. The research extends David Mosse's argument that development self-perpetuates “success” through participation and procedural licensing mechanisms while on-the-ground realities diverge significantly. It offers a critical examination of EIA utility and processes through identifying three general mechanisms within EIA and environmental licensing procedures that contribute to approval of projects and promote a perception of their legitimacy, while detracting from the intended purposes of EIAs as opportunities for meaningful public discussion and sustainability-oriented decision making. These mechanisms include discourses that entrench project necessity and make them appear inevitable, public participation, and the isolated treatment of related projects. This work situates an understanding of particular EIAs within a deeper process of regional territorial development and resource extraction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

The metal alloys from the XIX century and weathering action in the Mercado do Ver-o-Peso building, northern Brazil: Identification with the usage of laboratory analysis

The fabrication of metallic buildings started in Europe after the Industrial Revolution in the 18th century. Metallic constructions became very popular, and started being imported by several countries, due to the facility of constructing or assembling. Belém, a northern Brazilian city, holds a great number of buildings entirely made of iron, including the Ver-o-Peso, a fish market which structures were imported from England by the end of the 19th century. This building represents a unique type of architecture and it's an important part of the city's heritage. However, research so far did not focus on its construction materials. Ver-o-Peso building's metal alloys haven't been thoroughly studied concerning physical, chemical and mineralogical characterizations. This paper aims to identify the types of metal alloys used in the building, and also corrosion products' result from weathering actions. The methods used to characterize the materials were scanning electron microscopy and X-ray diffraction. Through this research it was possible to identify four types of iron alloys used in the different parts of the building, characterize the paint coats, and determine types of corrosion. The characterization of the materials in the building allows enrolling basis for restoration processes, documenting the types of metal alloy used in architectural heritage from the 19th century, as well as understanding the advances of corrosion. - Highlights: • Ver-o-peso is a heritage building from the 19th century with unidentified alloys. • Alloy and weathering product characterization was done using SEM/EDS and XRD. • Four metal alloy types were described, indicating different types of foundries. • Weathering products showed distinct mineral phases and physical characteristics. • Original paint coats were found among corrosion products.

36 MATERIALS SCIENCE↗
DOE OSTI2014

SU-F-19A-02: Comparison of Absorbed Dose to Water Standards for HDR Ir-192 Brachytherapy Between the LCR, Brazil and NRC, Canada

Purpose: To compare absorbed dose to water standards for HDR brachytherapy dosimetry developed by the Radiological Science Laboratory of Rio de Janeiro State University (LCR) and the National Research Council, Canada (NRC). Methods: The two institutions have separately developed absorbed dose standards based on the Fricke dosimetry system. There are important differences between the two standards, including: preparation and read-out of the Fricke solution, irradiation geometry of the Fricke holder in relation to the Ir-192 source, and determination of the G-value to be used at Ir-192 energies. All measurements for both standards were made directly at the NRC laboratory (i.e., no transfer instrument was used) using a single Ir-192 source (microSelectron v2). In addition, the NRC group has established a self-consistent method to determine the G-value for Ir-192, based on an interpolation between G-values obtained at Co-60 and 250kVp X-rays, and this measurement was repeated using the LCR Fricke solution to investigate possible systematic uncertainties. Results: G-values for Co-60 and 250 kVp x-rays, obtained using the LCR Fricke system, agreed with the NRC values within 0.5 % and 1 % respectively, indicating that the general assumption of universal G-values is appropriate in this case. The standard uncertainty in the determination of G for Ir-192 is estimated to be 0.6 %. For the comparison of absorbed dose measurements at the reference point for Ir-192 (1 cm depth in water, perpendicular to the seed long-axis), the ratio Dw(NRC)/Dw(LCR) was found to be 1.011 with a combined standard uncertainty of 1.7 %, k=1. Conclusion: The agreement in the absorbed dose to water values for the LCR and NRC systems is very encouraging. Combined with the lower uncertainty in this approach compared to the present air-kerma approach, these results reaffirm the use of Fricke solution as a potential primary standard for HDR Ir-192 brachytherapy.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Plant functional types broadly describe water use strategies in the Caatinga, a seasonally dry tropical forest in northeast Brazil

In seasonally dry tropical forests, plant functional type can be classified as deciduous low wood density, deciduous high wood density, or evergreen high wood density species. While deciduousness is often associated with drought-avoidance and low wood density is often associated with tissue water storage, the degree to which these functional types may correspond to diverging and unique water use strategies has not been extensively tested. We examined (a) tolerance to water stress, measured by predawn and mid-day leaf water potential; (b) water use efficiency, measured via foliar δ 13 C; and (c) access to soil water, measured via stem water δ 18 O. We found that deciduous low wood density species maintain high leaf water potential and low water use efficiency. Deciduous high wood density species have lower leaf water potential and variable water use efficiency. Both groups rely on shallow soil water. Evergreen high wood density species have low leaf water potential, higher water use efficiency, and access alternative water sources. These findings indicate that deciduous low wood density species are drought avoiders, with a specialized strategy for storing root and stem water. Deciduous high wood density species are moderately drought tolerant, and evergreen high wood density species are the most drought tolerant group. Our results broadly support the plant functional type framework as a way to understand water use strategies, but also highlight species-level differences.

54 ENVIRONMENTAL SCIENCES↗