Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BLACKBODY RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Systematic investigation of sustained laser-induced incandescence in carbon nanotubes

A focused laser beam irradiating on aligned carbon nanotubes (CNTs) in moderate vacuum results in bright and sustained laser-induced incandescence (LII) in CNTs. The incandescence corresponds to blackbody radiation from laser-heated CNTs at {approx}2400 K. Post-LII craters with well-defined ring boundaries in the CNT array were observed and examined with scanning electron microscopy and Raman spectroscopy. The enhanced purity of CNTs after LII as indicated by Raman spectroscopy studies was attributed to the removal of amorphous carbons on the as-grown CNTs during LII. A dynamic study of the crater formation further elucidates the nature of such craters. Through a systematic study of the effect of vacuum level and gaseous environment on LII, we discovered the process of thermal runaway during LII in CNTs. Thermal runaway is a threat to a sustained LII and can be prevented in nitrogen and argon environments. Oxygen was found to be responsible for thermal runaway reactions.

36 MATERIALS SCIENCE↗

Constraining Accretion Signatures of Exoplanets in the TW Hya Transitional Disk

We present a near-infrared direct imaging search for accretion signatures of possible protoplanets around the young stellar object (YSO) TW Hya, a multi-ring disk exhibiting evidence of planet formation. The Paβ line (1.282 μm) is an indication of accretion onto a protoplanet, and its intensity is much higher than that of blackbody radiation from the protoplanet. We focused on the Paβ line and performed Keck/OSIRIS spectroscopic observations. Although spectral differential imaging (SDI) reduction detected no accretion signatures, the results of the present study allowed us to set 5σ detection limits for Paβ emission of 5.8 × 10{sup −18} and 1.5 × 10{sup −18} erg{sup −1} s{sup −1} cm{sup −2} at 0.″4 and 1.″6, respectively. We considered the mass of potential planets using theoretical simulations of circumplanetary disks and hydrogen emission. The resulting masses were 1.45 ± 0.04 M {sub J} and 2.29{sub −0.04}{sup +0.03} M{sub J} at 25 and 95 au, respectively, which agree with the detection limits obtained from previous broadband imaging. The detection limits should allow for the identification of protoplanets as small as ∼1 M {sub J}, which may assist in direct imaging searches around faint YSOs for which extreme adaptive optics instruments are unavailable.

79 ASTRONOMY AND ASTROPHYSICS↗

Energy distribution of massless particles on black hole backgrounds with generalized uncertainty principle

We derive new formulas for the spectral energy density and total energy density of massless particles in a general spherically symmetric static metric from a generalized uncertainty principle. Compared with blackbody radiation, the spectral energy density is strongly damped at high frequencies. For large values of r, the spectral energy density diminishes when r grows, but at the event horizon, the spectral energy density vanishes and therefore thermodynamic quantities near a black hole, calculated via the generalized uncertainty principle, do not require any cutoff parameter. We find that the total energy density can be expressed in terms of Hurwitz zeta functions. It should be noted that at large r (low local temperature), the difference between the total energy density and the Stefan-Boltzmann law is too small to be observed. However, as r approaches an event horizon, the effect of the generalized uncertainty principle becomes more and more important, which may be observable. As examples, the spectral energy densities in the background metric of a Schwarzschild black hole and of a Schwarzschild black hole plus quintessence are discussed. It is interesting to note that the maximum of the distribution shifts to higher frequencies when the quintessence equation of state parameter w decreases.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

H - photodetachment and radiative attachment for astrophysical applications

We combine R-matrix calculations, asymptotic relations, and comparison to available experimental data to construct an H- photodetachment cross section reliable over a large range of photon energies and take into account the series of auto-detaching shape and Feshbach resonances between 10.92 and 14.35 eV. The accuracy of the cross section is controlled by ensuring that it satisfies all known oscillator strength sum rules, including contributions from the resonances and single-photon double-electron photodetachment. From the resulting recommended cross section, spontaneous and stimulated radiative attachment rate coefficients are obtained. Photodetachment rates are also computed for the standard interstellar radiation field, in diffuse and dense interstellar clouds, for blackbody radiation, and for high redshift distortion photons in the recombination epoch. Implications are investigated for these astrophysical radiation fields and epochs.

Optics↗

Pushbroom radiometry and its potential using large space antennas

Electromagnetic radiation is emitted by matter which was heated to a temperature above absolute zero. The amount of blackbody radiation in the microwave frequency region of interest (10 to the 8th power f 10 to the 10th power Hz) emitted by matter can be determined from the Rayleigh-Jeans approximation to Planck's Radiation Law. The amount of electromagnetic radiation from matter which is not a blackbody is a function of the emissivity of the material. The emissivity is a factor less than unity and is a function of several parameters including chemical composition, temperature, frequency, surface characteristics, and viewing angle. A radiometer is an instrument which detects and provides a measure of the electromagnetic radiation being emitted by a material or surface area within the radiometer's antenna beamwidth. Microwave radiometers provide the capability for remote measurements from Earth orbits of geophysical parameters. These measurements will require the use of a microwave imaging radiometer using a large aperture deployable antenna with multiple beams in a pushbroom mode to achieve high spatial resolution and large swath width.

Harrington, R. F.↗

Two-Step Calibration of a Multiwavelength Pyrometer for High Temperature Measurement Using a Quartz Lamp

There is no theoretical upper temperature limit for pyrometer application in temperature measurements. NASA Glenn's multiwavelength pyrometer can make measurements over wide temperature ranges. However, the radiation spectral response of the pyrometer's detector must be calibrated before any temperature measurement is attempted, and it is recommended that calibration be done at temperatures close to those for which measurements will be made. Calibration is a determination of the constants of proportionality at all wavelengths between the detector's output (voltage) and its input signals (usually from a blackbody radiation source) in order to convert detector output into radiation intensity. To measure high temperatures, the detectors are chosen to be sensitive in the spectral range from 0.4 to 2.5 micrometers. A blackbody furnace equilibrated at around 1000 C is often used for this calibration. Though the detector may respond sensitively to short wavelengths radiation, a blackbody furnace at 1000 C emits only feebly at very short wavelengths. As a consequence, the calibration constants that result may not be the most accurate. For pyrometry calibration, a radiation source emitting strongly at the short wavelengths is preferred. We have chosen a quartz halogen lamp for this purpose.

Ng, Daniel↗

Microwave remote sensing for atmospheric chemistry

Microwave remote sensing is a well-established technique for making sensitive thermal emission measurements at microwave frequencies. This thermal emission described by Planck’s law is the electromagnetic radiation at microwave wavelengths intrinsically emitted from hot objects. This is the blackbody radiation that constitutes the microwave baseline signal. The transitions between quantized rotational states of the constituent gas species gives rise to spectral features on top of this background signal. A distribution of the atmospheric constituents is retrieved from the measured emission lineshape correlated to pressure broadening as a function of altitude. Thus microwave radiometers enable the detection and continuous monitoring of trace gases present in the atmosphere. Microwave radiometers are deployed at various sites around the world measuring an assortment of species and meteorological parameters of interest. Several groups worldwide are active in this field, NRL remote sensing division and the Institute of Physics at the University of Bern among the prominent few. The technology is quite mature with the availability of room temperature RF components at W–band frequencies.

58 GEOSCIENCES↗

Investigation of Off-Stoichiometry in Ternary Nitrides by EDS and HRTEM

We demonstrate an inverted metamorphic multijunction (IMM) photovoltaic cell comprising lattice-mismatched 1.2 eV AlGaInAs and 1.0 eV GaInAs junctions optimized for high-temperature thermophotovoltaic (TPV) applications. This device differs from traditional IMM solar cells because the mismatched junctions are grown at a single lattice constant. This architecture enables removal of the compositionally graded buffer which otherwise filters light from the junctions below and absorbs sub-bandgap light via free-carrier absorption. Sub-bandgap absorption dramatically reduces the efficiency of TPV systems using high reflectivity cells to enable bandedge spectrum filtering. Three components required development to enable this device: 1) a lattice-mismatched 1.2 eV AlGaInAs junction, 2) a metamorphic contact layer grown after the graded buffer, and 3) a transparent tunnel junction that sits in front of the 1.0 eV GaInAs junction. Growth conditions that minimize oxygen defect incorporation maximize AlGaInAs cell quality, enabling a 0.41 V bandgap open circuit voltage offset at 22 mA/cm2 under AM1.5D. A mismatched GaInAs:Se layer is developed as a low resistance contact. Lastly we develop a GaAsSb:C/GaInP:Se tunnel junction suitable for high-power densities with more transparency than the GaAsSb:C/GaInP:Se structure used in past IMM cells. We characterize the tandem device under a high-intensity spectrum that approximates the emission from a 2150 °C blackbody radiator and deduce a projected ideal TPV efficiency of 39.9% at ~30% of the blackbody irradiance, and 36% ideal TPV efficiency under the full 118 W/cm2 irradiance. Improvements to the back-surface reflectivity and series resistance are expected to increase the ideal TPV efficiency well above 40%.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inverted Metamorphic AlGaInAs/GaInAs Tandem Thermophotovoltaic Cell Designed for Thermal Energy Grid Storage Application

We demonstrate an inverted metamorphic multijunction (IMM) photovoltaic cell comprising lattice-mismatched 1.2 eV AlGaInAs and 1.0 eV GaInAs junctions optimized for high-temperature thermophotovoltaic (TPV) applications. This device differs from traditional IMM solar cells because the mismatched junctions are grown at a single lattice constant. This architecture enables removal of the compositionally graded buffer that otherwise filters light from the junctions below and absorbs sub-bandgap light via free-carrier absorption. Sub-bandgap absorption dramatically reduces the efficiency of TPV systems using high reflectivity cells to enable band edge spectrum filtering. Three components required development to enable this device: (1) a lattice-mismatched 1.2 eV AlGaInAs junction, (2) a metamorphic contact layer grown after the graded buffer, and (3) a transparent tunnel junction that sits in front of the 1.0 eV GaInAs junction. Growth conditions that minimize oxygen defect incorporation maximize AlGaInAs cell quality, enabling a 0.41 V bandgap open circuit voltage offset at 22 mA/cm2 under AM1.5D. A mismatched GaInAs:Se layer is developed as a low resistance contact. Lastly, we develop a GaAsSb:C/GaInP:Se tunnel junction suitable for high-power densities with more transparency than the GaAsSb:C/GaInAs:Se structure used in past IMM cells. We characterize the tandem device under a high-intensity spectrum that approximates the emission from a 2150°C blackbody radiator and deduce a projected ideal TPV efficiency of 39.9% at ~30% of the blackbody irradiance and 36% ideal TPV efficiency under the full 118 W/cm2 irradiance. Improvements to the back-surface reflectivity and series resistance are expected to increase the ideal TPV efficiency well above 40%.

25 ENERGY STORAGE↗

Near-Field Radiative Heat Transfer Eigenmodes

The near-field electromagnetic interaction between nanoscale objects produces enhanced radiative heat transfer that can greatly surpass the limits established by far-field blackbody radiation. Here, we present a theoretical framework to describe the temporal dynamics of the radiative heat transfer in ensembles of nanostructures, which is based on the use of an eigenmode expansion of the equations that govern this process. Using this formalism, we identify the fundamental principles that determine the thermalization of collections of nanostructures, revealing general but often unintuitive dynamics. Overall, our results provide an elegant and precise approach to efficiently analyze the temporal dynamics of the near-field radiative heat transfer in systems containing a large number of nanoparticles.

74 ATOMIC AND MOLECULAR PHYSICS↗

Discretization Writeup for Grey Flux-Limited Radiation Diffusion

This report documents the time and space discretizations for grey flux-limited diffusion applied to the thermal radiative transfer (TRT) equations. We begin with a description of the physics being solved before moving into the diffusion approximation. Once we have the TRT system, we show a finite-volume-inspired discretization from Jim Morel (Texas A&M University, NUEN 627 class notes, lecture 8). As systems become hotter they emit more photons in the form of blackbody radiation. Because average photon energy of the blackbody source is proportional to the temperature of the system, we call these thermal photons or thermal radiation. As material temperatures increase, increasing fractions of the total energy in the system go into the radiation field. In addition, radiation can deposit energy and momentum non-locally, making it an important phenomenon for heating and impulse. In order to accurately study systems at high temperatures, we wish to add the physics of thermal radiation to our hydrodynamic system. In practice, coupling radiation and hydrodynamics is often done by operator-splitting each timestep into two consecutive, non-overlapping phases: (1) update the hydrodynamics for a fixed radiation state (2) update the radiation and internal energy for an otherwise fixed hydrodynamic state. Because of this clean separation of physics updates, in this report we show only the latter phase, which involves solely the TRT equations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Infrared maser emission from interstellar hydroxyl molecules

The energy structure and transition rates of the OH radical were studied in rotational and vibrational energies to provide the basis for studies of the population distributions under various exciting mechanisms. The absorption of ultra-violet or near infrared radiation which might explain the microwave emission was examined, as well as the absorption of low temperature blackbody radiation and collisions with molecular hydrogen. The results of the population studies were applied to the transfer equation, and a model of a uniform spherical cloud of OH was used with the pumping process which occurs uniformly throughout the region. The emission is unsaturated and the intensity is an exponential function of the size of the cloud for high pumping rates, and the region of unsaturated emission shrinks for lower pumping rates until the entire region is saturated, the intensity then becoming a linear function of the size of the emitting cloud.

Pelzmann, R. F., Jr.↗

Photothermal effects during nanodiamond synthesis from a carbon aerogel in a laser-heated diamond anvil cell

Nanodiamonds have emerged as promising materials for quantum computing, biolabeling, and sensing due to their ability to host color centers with remarkable photostability and long spin-coherence times at room temperature. Recently, a bottom-up, high-pressure, high-temperature (HPHT) approach was demonstrated for growing nanodiamonds with color centers from amorphous carbon precursors in a laser-heated diamond anvil cell (LH-DAC) that was supported by a near-hydrostatic noble gas pressure medium. However, a detailed understanding of the photothermal heating and its effect on diamond growth, including the phase conversion conditions and the temperature-dependence of color center formation, has not been reported. In this work, we measure blackbody radiation during LH-DAC synthesis of nanodiamond from carbon aerogel to examine these temperature-dependent effects. Blackbody temperature measurements suggest that nanodiamond growth can occur at 16.3 GPa and 1800 K. We use Mie theory and analytical heat transport to develop a predictive photothermal heating model. This model demonstrates that melting the noble gas pressure medium during laser heating decreases the local thermal conductivity to drive a high spatial resolution of phase conversion to diamond. In conclusion, we observe a temperature-dependent formation of nitrogen vacancy centers and interpret this phenomenon in the context of HPHT carbon vacancy diffusion.

36 MATERIALS SCIENCE↗

Coaxial radiative and convective heat transfer in gray and nongray gases

Coupled radiative and convective heat transfer is investigated for an absorbing gas flowing in a finite length channel and heated by blackbody radiation directed along the flow axis. The problem is formulated in one dimension and numerical solutions are obtained for the temperature profile of the gas and for the radiation escaping the channel entrance, assuming both gray and nongray absorption spectra. Due to radiation trapping, the flowing gas is found to have substantially smaller radiation losses for a given peak gas temperature than a solid surface that is radiatively heated to this temperature. A greenhouse effect is also evident whereby radiation losses are minimized for a gas having stronger absorption at long wavelengths.

Mattick, A. T.↗

Gamma-ray sources as Comptonized X-ray sources

The possible contribution of Compton scattering to the formation of gamma-ray burst spectra is analyzed. Monte Carlo calculations are used to study the spectral distribution emerging from a plasma at temperatures typical of gamma-ray burst spectra (above 100 keV) with an underlying source of photons reprocessed by inverse Compton scattering surrounding a point source of blackbody radiation. Comparison of the computations with the observed spectrum of the burst GB781104 results in a best fit with a blackbody X-ray source at 2.4 keV, plasma temperature of about 150 eV and plasma column density of 4 x 10 to the 24th electrons/sq cm. The Comptonization model is also shown to be capable of accounting for the two-component spectra observed for bursts GB790329 and GB790524, and the moving low-energy spectral cut-off in the burst of November 18, 1978.

Fenimore, E. E.↗

On the detection of other planetary systems - Detection of intrinsic thermal radiation

There is currently no unambiguous observational evidence for the existence of other planetary systems. One possible way to detect and study such systems is infrared observations of continuum blackbody radiation from planets revolving around other stars. It is shown that the effective temperature of large planets revolving around mid- to late-spectral-type main-sequences stars is set by energy sources internal to the planet rather than by equilibrium with the radiation field of the central star, making them easier to detect than had been previously thought. Consideration is given to the two major observational constraints on detecting planetary companions to nearby stars, namely, angular resolution and sensitivity. A comparison is made between the performance of an ambient (T 200 K), single-aperture telescope and a cooled interferometer. In each case the required aperture (baseline) is large (in the 10-m class), but consistent with Shuttle launch capability.

Black, D. C.↗