Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Attach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Simulation of Three-Dimensional Symmetric and Asymmetric Instabilities in Attachment-Line Boundary Layers

On a swept wing, contamination along the leading edge, Tollmien-Schlichting waves, stationary or traveling crossflow vortices, and/or Taylor-Gortler vortices can cause the catastrophic breakdown of laminar to turbulent flow, which leads to increased skin-friction drag for the aircraft. The discussion in this Note will be limited to disturbances which evolve along the attachment line (leading edge of swept wing). If the Reynolds number of the attachment-line boundary layer is greater than some critical value, then the complete wing is inevitably engulfed in turbulent flow. Essentially, there are two critical Reynolds number points that must be considered. The first is for small-amplitude disturbances, and the second is for bypass transition. The present study will use direct numerical simulations to validate a linear 2D-eigenvalue prediction method based on parabolized stability equations by Lin and Malik. This method is considered because it suggests that a number of symmetric and asymmetric modes exist and are stable or unstable on the attachment line depending on the Reynolds number. If validated, the approach would predict a number of modes which are linearly damped in the Reynolds number regime 100 to 245; however, these modes may grow nonlinearly and provide an explanation to this region.

Joslin, Ronald D.↗
NASA NTRS2005

Development and Ground-Test Validation of Fiber Optic Sensor Attachment Techniques for Hot Structures Applications

Fiber Optic Strain Measurements: a) Successfully attached silica fiber optic sensors to both metallics and composites; b) Accomplished valid EFPI strain measurements to 1850 F; c) Successfully attached EFPI sensors to large scale hot-structures; and d) Attached and thermally validated FBG bond and epsilon(sub app). Future Development a) Improve characterization of sensors on C-C and C-SiC substrates; b) Apply application to other composites such as SiC-SiC; c) Assist development of interferometer based Sapphire sensor currently being conducted under a Phase II SBIR; and d) Complete combined thermal/mechanical testing of FBG on composite substrates in controlled laboratory environment.

Piazza, Anthony↗
NASA NTRS2000

Detection of explosives, nerve agents, and illicit substances by zero-energy electron attachment

The Reversal Electron Attachment Detection (READ) method, developed at JPL/Caltech, has been used to detect a variety of substances which have electron-attachment resonances at low and intermediate electron energies. In the case of zero-energy resonances, the cross section (hence attachment probability and instrument sensitivity) is mediated by the so-called s-wave phenomenon, in which the cross sections vary as the inverse of the electron velocity. Hence this is, in the limit of zero electron energy or velocity, one of the rare cases in atomic and molecular physics where one carries out detection via infinite cross sections.

vapor detection explosives electron detachment↗
NASA NTRS1990

Magnetic attachment mechanism

A magnetic attachment mechanism adapted for interfacing with the manipulator arm (11) of a remote manipulator system and comprising a pair of permanent magnets (31,32) of rare earth material which are arranged in a stator-rotor relationship. The rotor magnet (32), is journalled for rotation about its longitudinal axis between pole plates (35,36) of the stator magnet (31), each of which includes an adhering surface (35a,36a). In a first rotary position corresponding to the ON condition, each of the poles of the rotor magnet (32) is closely adjacent a stator magnet pole plate of like polarity whereby the respective magnet fields are additive for producing a strong magnetic field emanating from the adhering surfaces (35a,36a) for attracting a ferrous magnetic plate 20, or the like, affixed to the payload (20 or 50). When the rotor magnet (32) is rotated to a second position corresponding to the OFF condition, each of the poles of the rotor magnet (31) is disposed closely adjacent a pole plate of unlike polarity whereby the magnetic fields of the magnets are in cancelling relationship at the adhering surfaces (35a,36a) which permits the release of a payload. An actuator (51 or 70) for selectively rotating the rotor magnet (32) between the ON and OFF positions is provided for interfacing and connecting the magnetic attachment mechanism with a manipulator arm. For effecting an optimal rigidized attachment the payload is provided with guides (91,92) cooperable with guides (96,16,17) on the housing of the mechanism for directing adhering surfaces (35a,36a) of the polar plates to the ferrous plate (20).

Harwell, William D.↗
NASA NTRS2010

Improved Attachment in a Hybrid Inflatable Pressure Vessel

The vessel is a hybrid that comprises an inflatable shell attached to a rigid structure. The inflatable shell is, itself, a hybrid that comprises (1) a pressure bladder restrained against expansion by (2) a restraint layer that comprises a web of straps made from high-strength polymeric fabrics. The present improvements are intended to overcome deficiencies in those aspects of the original design that pertain to attachment of the inflatable shell to the rigid structure. In a typical intended application, such attachment(s) would be made at one or more window or hatch frames to incorporate the windows or hatches as integral parts of the overall vessel.

Johnson, Christopher J.↗
NASA NTRS2010

Design of 8-ft-Diameter Barrel Test Article Attachment Rings for Shell Buckling Knockdown Factor Project

The Shell Buckling Knockdown Factor (SBKF) project includes the testing of sub-scale cylinders to validate new shell buckling knockdown factors for use in the design of the Ares-I and Ares-V launch vehicles. Test article cylinders represent various barrel segments of the Ares-I and Ares-V vehicles, and also include checkout test articles. Testing will be conducted at Marshall Space Flight Center (MSFC) for test articles having an eight-foot diameter outer mold line (OML) and having lengths that range from three to ten feet long. Both ends of the test articles will be connected to the test apparatus using attachment rings. Three multiple-piece and one single-piece design for the attachment rings were developed and analyzed. The single-piece design was chosen and will be fabricated from either steel or aluminum (Al) depending on the required safety factors (SF) for test hardware. This report summarizes the design and analysis of these attachment ring concepts.

Lovejoy, Andrew E.↗
NASA NTRS2012

Use of Functionalized Carbon Nanotubes for Covalent Attachment of Nanotubes to Silicon

The purpose of the invention is to covalently attach functionalized carbon nanotubes to silicon. This step allows for the introduction of carbon nanotubes onto all manner of silicon surfaces, and thereby introduction of carbon nano - tubes covalently into silicon-based devices, onto silicon particles, and onto silicon surfaces. Single-walled carbon nanotubes (SWNTs) dispersed as individuals in surfactant were functionalized. The nano - tube was first treated with 4-t-butylbenzenediazonium tetrafluoroborate to give increased solubility to the carbon nanotube; the second group attached to the sidewall of the nanotube has a silyl-protected terminal alkyne that is de-protected in situ. This gives a soluble carbon nanotube that has functional groups appended to the sidewall that can be attached covalently to silicon. This reaction was monitored by UV/vis/NJR to assure direct covalent functionalization.

Tour, James M.↗
NASA NTRS2012

Evaluation of Underwater Adhesives and Friction Coatings for In Situ Attachment of Fiber Optic Sensor System for Subsea Applications

Integrity and performance monitoring of subsea pipelines and structures provides critical information for managing offshore oil and gas production operation and preventing environmentally damaging and costly catastrophic failure. Currently pipeline monitoring devices require ground assembly and installation prior to the underwater deployment of the pipeline. A monitoring device that could be installed in situ on the operating underwater structures could enhance the productivity and improve the safety of current offshore operation. Through a Space Act Agreement (SAA) between the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) and Astro Technology, Inc. (ATI), JSC provides technical expertise and testing facilities to support the development of fiber optic sensor technologies by ATI. This paper details the first collaboration effort between NASA JSC and ATI in evaluating underwater applicable adhesives and friction coatings for attaching fiber optic sensor system to subsea pipeline. A market survey was conducted to examine different commercial ]off ]the ]shelf (COTS) underwater adhesive systems and to select adhesive candidates for testing and evaluation. Four COTS epoxy based underwater adhesives were selected and evaluated. The adhesives were applied and cured in simulated seawater conditions and then evaluated for application characteristics and adhesive strength. The adhesive that demonstrated the best underwater application characteristics and highest adhesive strength were identified for further evaluation in developing an attachment system that could be deployed in the harsh subsea environment. Various friction coatings were also tested in this study to measure their shear strengths for a mechanical clamping design concept for attaching fiber optic sensor system. A COTS carbide alloy coating was found to increase the shear strength of metal to metal clamping interface by up to 46 percent. This study provides valuable data for assessing the feasibility of developing the next generation fiber optic senor system that could be retrofitted onto existing subsea pipeline structures.

Tang, Henry H.↗
NASA NTRS2017

Temporary Thermocouple Attachment for Thermal/Vacuum Testing at Non-Extreme Temperatures - Test Results

Post-test examination and data analysis that followed a two week long vacuum test showed that numerous self-stick thermocouples became detached from the test article. The thermocouples were reattached with thermally conductive epoxy and the test was repeated to obtain the required data. Because the thermocouple detachment resulted in significant expense and rework, it was decided to investigate the temporary attachment methods used around NASA and to perform a test to assess their efficacy. The present work describes the testing that was performed in early and mid-2017. The test article and the temporary thermocouple attachment methods tested are described. During the first test, fully half of the thermocouples detached - although the detachment showed subtly in the data for some. The second test was performed to confirm the data from the first test and to investigate the effect of test article and thermocouple grounding. The results of the testing over temperatures ranging from -150 to 200degF are detailed and preliminary recommendations are made for temporary thermocouple attachment methods.

Wright, Sarah E.↗
DOE OSTI2023

Characteristics of upward-connecting-leader current leading to attachment in downward negative cloud-to-ground lightning strokes

For this work, we analyzed currents associated with upward connecting leaders (UCLs) initiated from the Kennedy Space Center Industrial Area Tower in two negative cloud-to-ground strokes that struck the tower. One stroke was also recorded using a high-speed video camera located 760 m from the KSC IAT. The NLDN-reported peak currents for the two strokes were – 31.7 and – 98.5 kA. During the UCL development phase the current waveforms exhibited a monotonically (quasi-exponentially) increasing “background” current overlaid with 10-μs scale pulses with a median amplitude of 51.1 A. The UCL current durations for the two strokes were 1039 and 449 μs, respectively. During the pre-attachment processes (UCL and slow front) the total negative charge effectively transferred to ground were 70.2 and 55 mC, respectively. For the stroke captured on high-speed video, the average line-charge-density for the 109-m long UCL was found to be 0.5 mC/m. The average UCL 2-D speed was 2.4 × 10 5 m/s, and it was observed to accelerate toward the downward leader prior to attachment. We observed that UCL-pulse amplitudes are larger, background currents are higher, and interpulse intervals are shorter at later times during UCLs, which can be attributed to the intensification of the local electric field due to the approaching downward negative leader. The median positive charge injected into the UCL by a pulse was 297 μC. The UCL associated with the higher peak-current stroke produced the highest injected pulse-charge values about three times sooner during its development, likely due to the 2–2.7 times faster average downward leader vertical speeds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Public perceptions of wave energy development on the west coast of North America: Risks, benefits, and coastal attachment

While solar and wind energy continue to grow as significant sources of renewable energy, a global energy transition away from fossil fuels will require an expanding portfolio of generating resources. Marine renewable energy has the potential to contribute greatly in the coming decades, as the more predictable nature of wave energy can support the resiliency of the power grid and complement solar and inland wind generation. Yet, the broad deployment of marine energy technologies like wave energy will depend on public support, making it critical to identify the relevant factors associated with public attitudes and risk/benefit perceptions. This paper draws on social representations theory to specifically examine perceptions of wave energy on the west coast of North America, a site chosen because of the high suitability for wave energy generation and the fact that one of only three wave energy test sites in the world is under development off the coast of Oregon. Using an online survey in June 2020, we recruited a sample of 2000 respondents from California, Oregon, Washington, and British Columbia. We found a majority of respondents held positive attitudes to wave energy, but respondents also had low familiarity – with a quarter of respondents lacking sufficient information to form an opinion. We used logistic regression to identify factors correlated with wave energy attitudes, finding that respondents who were more supportive of wind and solar energy, more optimistic about new technology, and reported more familiarity with wave energy were significantly more likely to have a positive impression of wave energy. Respondents with higher levels of place attachment to coastal areas were more split, as they perceived higher benefits of wave energy – but also higher risks. Our results indicate broad appeal of wave energy on the west coast, but we caution policymakers and developers to not take initial siting processes for granted. As experience has shown for offshore wind, broad appeal does not guarantee a smooth siting process in a local context. Furthermore, the role of place attachment to coastal areas must be taken seriously or risk alienating local communities.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Effect of Solvent Composition on Non-DLVO Forces and Oriented Attachment of Zinc Oxide Nanoparticles

Oriented attachment (OA) occurs when nanoparticles in solution align their crystallographic axes prior to colliding and subsequently fuse into single crystals. Traditional colloidal theories such as DLVO provide a framework for evaluating OA but fail to capture key particle interactions due to the atomistic details of both the crystal structure and the interfacial solution structure. Using zinc oxide as a model system, we investigated the effect of the solvent on short-ranged and long-ranged particle interactions and the resulting OA mechanism. In situ TEM imaging showed that ZnO nanocrystals in toluene undergo long-range attraction comparable to 1kT at separations of 10 nm and 3kT near particle contact. These observations were rationalized by considering non-DLVO interactions, namely dipole-dipole forces and torques between the polar ZnO nanocrystals. Langevin dynamics simulations showed stronger interactions in toluene compared to methanol solvents, consistent with the experimental results. Concurrently, we performed atomic force microscopy measurements using ZnO-coated probes for the short-ranged interaction. Our data provided valuable insights into another type of non-DLVO interaction, namely the repulsive solvation force. Specifically, the solvation force was stronger in water compared to ethanol and methanol, due to the stronger hydrogen bonding and denser packing of water molecules at the interface. In conclusion, our results highlight the importance of non-DLVO forces in a general framework for understanding and predicting particle aggregation and attachment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Atomic Alignment in PbS Nanocrystal Superlattices with Compact Inorganic Ligands via Reversible Oriented Attachment of Nanocrystals

Nanocrystals (NCs) serve as versatile building blocks for the creation of functional materials with NC self-assembly offering opportunities to enable novel material properties. Here, in this work, we demonstrate that PbS NCs functionalized with strongly negatively charged metal chalcogenide complex (MCC) ligands, such as Sn 2 S 6 4– and AsS 4 3– , can self-assemble into all-inorganic superlattices with both long-range superlattice translational and atomic-lattice orientational order. Structural characterizations reveal that the NCs adopt an unexpected edge-to-edge alignment, and numerical simulation clarifies that orientational order is thermodynamically stabilized by many-body ion correlations originating from the dense electrolyte. Furthermore, we show that the superlattices of Sn 2 S 6 4– -functionalized PbS NCs can be fully disassembled back into the colloidal state, which is highly unusual for orientationally attached superlattices with atomic-lattice alignment. The reversible oriented attachment of NCs, enabling their dynamic assembly and disassembly into effectively single-crystalline superstructures, offers a pathway toward designing reconfigurable materials with adaptive and controllable electronic and optoelectronic properties.

Landau-Ginzburg theory↗
DOE OSTI2023

Parameters of the Lightning Attachment Processes in a Negative Cloud-To-Ground Stroke Observed on a Microsecond Timescale

We present time-correlated ultra-high-speed video camera and electromagnetic field measurements of the attachment processes in a natural negative cloud-to-ground stroke. The video camera frame exposure time and pixel resolution were 740 ns and 0.91 m/pixel, respectively. The common streamer zone (CSZ) was first observed 2.52 µs preceding the first frame showing the return stroke (RS) in progress, when the upward and downward leader-tips were 9.8 m apart. In the next frame, the two leaders were observed to have propagated toward each other within the CSZ, with their tips being 0.91 m apart. Our observations show with unprecedented precision/clarity that (a) the slow front in the field waveform is associated with the CSZ, and (b) the “proper” start of the RS is marked by the onset of the fast transition in the field waveform which occurs at the completion of the attachment processes (when the upward and downward leaders have merged).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Parameterization of electron attachment rate constants for impurities in LArTPC detectors

The ability of free electrons to drift long distances at high velocities in pure liquid argon under an applied electric field has been exploited for the past forty years to implement detectors with increasingly larger volumes for high energy physics research. The attachment of free electrons to impurities in the LAr is an important limit on the free instrumented volume of these extremely large detectors, and impurity concentrations as small as 100 ppt can reduce their resolution and efficiency. In this paper, we summarize the electron attachment rate constants as a function of the applied electric field, for common impurities in LArTPCs, obtained from data in the literature. Here, we further provide analytical functions to parameterize the data, which are useful to compare with new measurements, to model and analyze the performance of existing detectors, and to predict the performance of new detectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

An Investigation of Strategies for Sensing Window Attachment Position: Survey of Candidate Technologies, Evaluation, and Deployment Recommendations

While windows are desirable feature in buildings for views, daylighting, and aesthetics, it is important to recognize that windows are a major contributor to a building’s energy load. Interior window coverings, such as shades and blinds, can help improve the energy performance of windows without sacrificing the benefits; however, while appropriate use of window coverings provide the potential for energy savings, there is little consensus regarding how occupants typically use these window attachments, which sometimes puts into question how much energy they actually save in an occupied home. Automated shading control strategies can reduce the uncertainty of energy savings; however, users can overwrite pre-defined schedules or write their own shade control programs to reach their personal comfort and privacy goals. Because it is difficult to identify how occupants interact with window shades, it is difficult to identify the energy savings potential of blinds. To address this problem, this study was developed to identify a candidate sensor that can be deployed to sense blind position. The intended application for this sensor is deployment in energy efficiency field studies so that shade usage can be measured to better understand results and identify the energy impact of specific window attachment technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Quantized Grain Boundary States Promote Nanoparticle Alignment During Imperfect Oriented Attachment

Oriented attachment (OA) has become a well-recognized mechanism for the growth of metal, ceramic, and biomineral crystals. While many computational and experimental studies of OA have shown that particles can attach with some misorientation then rotate to remove adjoining grain boundaries, the underlying atomistic pathways for this “Imperfect OA” process remain the subject of debate. In this paper, molecular dynamics and in situ TEM were used to probe the crystallographic evolution of up to 30 gold and copper nanoparticles during aggregation. It was found that Imperfect OA occurs because (1) grain boundaries become quantized when their size is comparable to the separation between constituent dislocations and (2) kinetic barriers associated with the glide of grain boundary dislocations are small. In support of these findings, TEM experiments show the formation of a single crystal aggregate after annealing 9 initially misoriented, agglomerated particles with evidence of dislocation slip and twin formation during particle/grain alignment. These observations motivate future work on assembled nanocrystals with tailored defects and call for a revision of Read-Shockley models for grain boundary energies in nanocrystalline materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗