Results for “Albedo” — Page 7

DOE OSTI2022

Spatiotemporal evolution of melt ponds on Arctic sea ice

Melt ponds on sea ice play an important role in the Arctic climate system. Their presence alters the partitioning of solar radiation: decreasing reflection, increasing absorption and transmission to the ice and ocean, and enhancing melt. The spatiotemporal properties of melt ponds thus modify ice albedo feedbacks and the mass balance of Arctic sea ice. The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition presented a valuable opportunity to investigate the seasonal evolution of melt ponds through a rich array of atmosphere-ice-ocean measurements across spatial and temporal scales. In this study, we characterize the seasonal behavior and variability in the snow, surface scattering layer, and melt ponds from spring melt to autumn freeze-up using in situ surveys and auxiliary observations. We compare the results to satellite retrievals and output from two models: the Community Earth System Model (CESM2) and the Marginal Ice Zone Modeling and Assimilation System (MIZMAS). During the melt season, the maximum pond coverage and depth were 21% and 22 ± 13 cm, respectively, with distribution and depth corresponding to surface roughness and ice thickness. Compared to observations, both models overestimate melt pond coverage in summer, with maximum values of approximately 41% (MIZMAS) and 51% (CESM2). This overestimation has important implications for accurately simulating albedo feedbacks. During the observed freeze-up, weather events, including rain on snow, caused high-frequency variability in snow depth, while pond coverage and depth remained relatively constant until continuous freezing ensued. Both models accurately simulate the abrupt cessation of melt ponds during freeze-up, but the dates of freeze-up differ. MIZMAS accurately simulates the observed date of freeze-up, while CESM2 simulates freeze-up one-to-two weeks earlier. This work demonstrates areas that warrant future observation-model synthesis for improving the representation of sea-ice processes and properties, which can aid accurate simulations of albedo feedbacks in a warming climate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Comparing Outdoor to Indoor Performance for Bifacial Modules Affected by Polarization-Type Potential-Induced Degradation

Bifacial photovoltaic (PV) modules have the advantage of using light reflected off of the ground to contribute to power production. Predicting the energy gain is challenging and requires complex models to do so accurately. Often, module degradation over time is neglected in models for the sake of simplicity or is underestimated. Comparing outdoor and indoor current–voltage (I–V) performance for bifacial modules is more challenging than for monofacial modules, as there are additional variables to consider such as rear albedo non-uniformity, cell mismatch, and their effects on temperature. This challenge is compounded when heterogeneous degradation modes occur, such as polarization-type potential-induced degradation (PID-p). To examine the effects of PID-p on I–V predictions using an empirical data-driven approach, 16 bifacial PERC modules are installed outdoors on racks with different albedo conditions. A subset is exposed to high-voltage biases of −1500 V or +1500 V. Outdoor data are traced at irradiance ranges of 150–250 W/m 2 , 500–600 W/m 2 , and 900–1000 W/m 2 . These curves are corrected using control module temperature, wire resistivity, and module resistance measured indoors. We examine several methods to transform indoor I–V curves to accurately, and more simply than existing methods, approximate outdoor performance for bifacial modules without and with varying levels of PID-p degradation. This way, bifacial performance modeling can be more accessible and informed by fielded, degraded modules. Distributions of percent errors between indoor and outdoor performance parameters and Mean Absolute Percent Errors (MAPEs) are used to assess method quality. Results including low-irradiance data (150–250 W/m 2 ) are discussed but are filtered for quantifying method quality as these data introduce substantial errors. The method with the most optimal tradeoff between low MAPE and analysis simplicity involves measuring the front side of a module indoors at an irradiance equal to plane-of-array irradiance plus the product of module bifaciality and albedo irradiance. This method gives MAPE values of 1–6.5% for non-degraded and 1.6–5.9% for PID-p degraded module performance.

14 SOLAR ENERGY↗

DOE OSTI2026

Evidence of Recent Material Transport within a Binary Asteroid System

Images acquired by the Double Asteroid Redirection Test (DART) before its impact into Dimorphos—the moon of the Didymos binary asteroid system—unexpectedly reveal a set of discontinuous rays spanning the imaged surface. These albedo features are visible only after correcting for lighting differences, which normalize the effects of the pervasive boulders that cover the surface. Comparison to physical experiments and numerical simulations shows that these bright, fan-shaped albedo features are consistent with the aftermath of a low-velocity impact into a field of boulders and provide our first direct evidence for the transfer of material in a binary asteroid system due to the shedding material from radiative torques. Parts of these and possible additional albedo markings from the reentry of boulders after the DART impact may be visible to the Hera mission when it explores the post-DART Didymos system.

Astronomy and AstroPhysics↗

DOE OSTI2020

Radiative heating rate profiles over the southeast Atlantic Ocean during the 2016 and 2017 biomass burning seasons

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. Further uncertainties in the cloud structure arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean, where biomass burning aerosol is transported from the African continent. As the aerosol plume progresses across the southeast Atlantic Ocean, radiative heating within the aerosol layer has the potential to alter the thermodynamic environment and therefore the cloud structure; however, limited work has been done to quantify this along the trajectory of the aerosol plume in the region. The deployment of the first Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF1) in support of the Layered Atlantic Smoke Interactions with Clouds field campaign provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96° S, 14.35° W). Using observed profiles of temperature, humidity, and clouds from the field campaign alongside aerosol optical properties from Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), as input for the Rapid Radiation Transfer Model (RRTM), profiles of the radiative heating rate due to aerosols and clouds were computed. Radiative heating is also assessed across the southeast Atlantic Ocean using an ensemble of back trajectories from the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. Idealized experiments using the RRTM with and without aerosols and a range of values for the single-scattering albedo (SSA) demonstrate that shortwave (SW) heating within the aerosol layer above Ascension Island can locally range between 2 and 8 K d -1 depending on the aerosol optical properties, though impacts of the aerosol can be felt elsewhere in the atmospheric column. When considered under clear conditions, the aerosol has a cooling effect at the TOA, and based on the observed cloud properties at Ascension Island, the cloud albedo is not large enough to overcome this. Shortwave radiative heating due to biomass burning aerosol is not balanced by additional longwave (LW) cooling, and the net radiative impact results in a stabilization of the lower troposphere. However, these results are extremely sensitive to the single-scattering albedo assumptions in models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Daytime variation in the aerosol indirect effect for warm marine boundary layer clouds in the eastern North Atlantic

Abstract. Warm boundary layer clouds in the eastern North Atlantic region exhibit significant diurnal variations in cloud properties. However, the diurnal cycle of the aerosol indirect effect (AIE) for these clouds remains poorly understood. This study takes advantage of recent advancements in the spatial resolution of geostationary satellites to explore the daytime variation in the AIE by estimating the cloud susceptibilities to changes in cloud droplet number concentration (Nd). Cloud retrievals for the month of July over 4 years (2018–2021) from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on Meteosat-11 over this region are analyzed. Our results reveal a significant “U-shaped” daytime cycle in susceptibilities of the cloud liquid water path (LWP), cloud albedo, and cloud fraction. Clouds are found to be more susceptible to Nd perturbations at noon and less susceptible in the morning and evening. The magnitude and sign of cloud susceptibilities depend heavily on the cloud state defined by cloud LWP and precipitation conditions. Non-precipitating thin clouds account for 44 % of all warm boundary layer clouds in July, and they contribute the most to the observed daytime variation. Non-precipitating thick clouds are the least frequent cloud state (10 %), and they exhibit more negative LWP and albedo susceptibilities compared to thin clouds. Precipitating clouds are the dominant cloud state (46 %), but their cloud susceptibilities show minimal variation throughout the day. We find evidence that the daytime variation in LWP and albedo susceptibilities for non-precipitating clouds is influenced by a combination of the diurnal transition between non-precipitating thick and thin clouds and the “lagged” cloud responses to Nd perturbations. The daytime variation in cloud fraction susceptibility for non-precipitating thick clouds can be attributed to the daytime variation in cloud morphology (e.g., overcast or broken). The dissipation and development of clouds do not adequately explain the observed variation in cloud susceptibilities. Additionally, daytime variation in cloud susceptibility is primarily driven by variation in the intensity of cloud response rather than the frequency of occurrence of cloud states. Our results imply that polar-orbiting satellites with an overpass time at 13:30 LT underestimate daytime mean values of cloud susceptibility, as they observe susceptibility daily minima in the study region.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Orthomosaic Images and Digital Elevation Models for the 2019 SALVO Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Magnaprobe Snow Depths for the 2019 SALVO Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Snow-substrate interface temperature and air temperature for the SALVO 2019 Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Air temperature and relative humidity for the SALVO 2022 Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Snow-substrate interface temperature and air temperature for the SALVO 2022 Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Orthomosaic Images and Digital Elevation Models for the 2022 SALVO Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Magnaprobe Snow Depths for the 2022 SALVO Campaign

The springtime, surface-albedo transition in the Alaskan Arctic and the forcings that determine the duration and nature of that transition are the focus of our Snow ALbedo eVOlution (SALVO I & II) campaign. The SALVO team are assessing the “whys” and “how longs” of the stages of the spring melt during which albedo values drop from 0.8 to 0.1, the largest and most significant change of the year. The near-shore location of the ARM NSA observatory makes this an ideal place to investigate these melt stages.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Artificial ground reflector size and position effects on energy yield and economics of single‐axis‐tracked bifacial photovoltaics

Abstract Artificial ground reflectors improve bifacial energy yield by increasing both front and rear‐incident irradiance. Studies have demonstrated an increase in energy yield due to the addition of artificial reflectors; however, they have not addressed the effect of varying reflector dimensions and placement on system performance and the impact of these parameters on the reflectors' financial viability. We studied the effect of high albedo (70% reflective) artificial reflectors on single‐axis‐tracked bifacial photovoltaic systems through ray‐trace modeling and field measurements. In the field, we tested a range of reflector configurations by varying reflector size and placement and demonstrated that reflectors increased daily energy yield up to 6.2% relative to natural albedo for PERC modules. To confirm the accuracy of our model, we compared modeled and measured power and found a root mean square error (RMSE) of 5.4% on an hourly basis. We modeled a typical meteorological year in Golden, Colorado, to demonstrate the effects of artificial reflectors under a wide range of operating conditions. Seventy percent reflective material can increase total incident irradiance by 1.9%–8.6% and total energy yield by 0.9%–4.5% annually after clipping is considered with a DC–AC ratio of 1.2. Clipping has a significant effect on reflector impact and must be included when assessing reflector viability because it reduces reflector energy gain. We calculated a maximum viable cost for these improvements of up to $2.50–4.60/m 2 , including both material and installation, in Golden. We expanded our analysis to cover a latitude range of 32–48°N and demonstrated that higher‐latitude installations with lower energy yield and higher diffuse irradiance content can support higher reflector costs. In both modeling and field tests, and for all locations, the ideal placement of the reflectors was found to be directly underneath the module due to the optimized rear irradiance increase.

14 SOLAR ENERGY↗

DOE OSTI2023

Highly efficient bifacial single-junction perovskite solar cells

Bifacial photovoltaics (PV) harvest solar irradiance from both their front and rear surfaces, boosting energy conversion efficiency to maximize their electrical power production. For single-junction perovskite solar cells (PSCs), the performance of bifacial configurations is still far behind that of their state-of-the-art monofacial counterparts. Here, in this paper, we report on highly efficient, bifacial, single-junction PSCs based on the p-i-n (or inverted) architecture. We used optical and electrical modeling to design a transparent conducting rear electrode for bifacial PSCs to enable optimized efficiency under a variety of albedo illumination conditions. The bifaciality of the PSCs was about 91%–93%. Under concurrent bifacial measurement conditions, we obtained equivalent, stabilized bifacial power output densities of 26.9, 28.5, and 30.1 mW/cm 2 under albedos of 0.2, 0.3, and 0.5, respectively. We further showed that bifacial perovskite PV technology has the potential to outperform its monofacial counterparts with higher energy yields and lower levelized cost of energy (LCOE).

14 SOLAR ENERGY↗

DOE OSTI2025

Cooling outweighs warming across phenological transitions in the Northern Hemisphere

Vegetation phenology, i.e., seasonal biological events such as leaf-out and leaf-fall, regulates local climate through biophysical processes like evapotranspiration (ET) and albedo. However, the net surface temperature impact of these processes—whether ET cooling or albedo-induced warming predominates—and how the dominance changes across phenological transitions and regions remains poorly understood. Here, we investigated the effects of vegetation foliage on daytime land surface temperature (LST) following six phenological transitions, spanning from the start of season to end of season, in deciduous and mixed forests across the mid- to high-latitude Northern Hemisphere during 2013–2021 using multiple satellite products and ground observations. We quantified vegetation effect as the difference between observed LST and LST estimates from the Annual Temperature Cycle (ATC) model, representing a no-foliage scenario. We found that vegetation-induced cooling consistently outweighs warming following all phenological transitions except for the end of the season. Cooling intensity increased with vegetation greenness, ranging from 1.0 ± 0.5 °C (mean ± 0.15 SD) in 59% of forests after the start of the season (SOS) to 6.1 ± 0.8 °C in 89% of forests following the onset of maturity, before declining toward the end of the season. Over half of the regions experiencing cooling showed intensification of surface cooling with climate warming, suggesting an amplified vegetation-mediated cooling under future climate change. The findings provide a more precise understanding of the role of vegetation in modulating climate at the intraseasonal scale, highlighting the importance of integrating phenological impacts into climate adaptation strategies and Earth system modeling.

albedo↗

DOE OSTI2020

Statistical Characterization of Hot Jupiter Atmospheres Using Spitzer’s Secondary Eclipses

We report 78 secondary eclipse depths for a sample of 36 transiting hot Jupiters observed at 3.6 and 4.5 μm using the Spitzer Space Telescope. Our eclipse results for 27 of these planets are new, and include highly irradiated worlds such as KELT-7b, WASP-87b, WASP-76b, and WASP-64b, and important targets for James Webb Space Telescope such as WASP-62b. We find that WASP-62b has a slightly eccentric orbit (ecos ω=0.00614±0.00064), and we confirm the eccentricity of HAT-P-13b and WASP-14b. The remainder are individually consistent with circular orbits, but we find statistical evidence for eccentricity increasing with orbital period in our range from 1 to 5 days. Our day-side brightness temperatures for the planets yield information on albedo and heat redistribution, following Cowan & Agol (2011). Planets having maximum day-side temperatures exceeding ~2200 K are consistent with having zero albedo and a distribution of stellar irradiance uniformly over the day-side hemisphere. Our most intriguing result is that we detect a systematic difference between the emergent spectra of these hot Jupiters as compared to blackbodies. The ratio of observed brightness temperatures, Tb(4.5)/Tb(3.6), increases with equilibrium temperature by 100 ± 24 parts-per-million per Kelvin, over the entire temperature range in our sample (800–2500 K). No existing model predicts this trend over such a large range of temperature. We suggest that this may be due to a structural difference in the atmospheric temperature profiles of real planetary atmospheres as compared to models.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

surfspecalb7nch1mlawer

Surface Spectral Albedo

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Evidence of Polarization‐Type Potential‐Induced Degradation (PID‐p) in the Field and Investigation of the Recovery Mechanism on Bifacial p ‐PERC Modules

This study investigates the polarization-type potential-induced degradation (PID-p) of bifacial glass/glass p-type passivated emitter rear contact (p-PERC) modules in the field and their recovery behavior. Modules were installed with three mounting configurations providing different albedo conditions. System voltage (–600, –1500, and +1500 V) was applied to the cell circuits, with respect to the grounded module frames. No degradation was observed for positively biased modules, but PID-p was identified on the rear side when cells are negatively biased, with maximum power dropping during the first days and stabilizing at values up to 8% loss. Electroluminescence images revealed a variation of the cells' PID-p susceptibility within a module. Three parameters were shown to impact the degradation rate: rear albedo light, voltage, and wetness conditions. Degraded modules were recovered either by (1) a positive bias (+1500 V), (2) outdoor illumination with the front side facing sun, (3) outdoor illumination with the rear side facing sun, or (4) dark storage. A recovery pattern was identified with I–V parameters decreasing to a local minimum before increasing to full recovery. The proposed mechanism is based on the band bending at the rear p-type Si/AlO x/SiN x interface, going from inversion to depletion and accumulation states. Full recovery was achieved in 2–7 h for the modules recovered with the rear side facing sun, four to eight nights for the modules positively biased at night, and 10–20 days for the modules with the front side facing sun. Dark storage showed slower recovery rates as I–V parameters were not improving even after 1 month. Here, the recovery rates were correlated with the net Coulombs transferred during the preceding PID stress: When more Coulombs are transferred during the degradation, the extent of degradation is greater, leading to slower recovery rates.

14 SOLAR ENERGY↗