Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Nondestructive evaluation of advanced ceramics

A review is presented of Lewis Research Center efforts to develop nondestructive evaluation techniques for characterizing advanced ceramic materials. Various approaches involved the use of analytical ultrasonics to characterize monolythic ceramic microstructures, acousto-ultrasonics for characterizing ceramic matrix composites, damage monitoring in impact specimens by microfocus X-ray radiography and scanning ultrasonics, and high resolution computed X-ray tomography to identify structural features in fiber reinforced ceramics.

Klima, Stanley J.↗
NASA NTRS1977

Flight simulation testing of advanced composites for supersonic cruise aircraft applications

The goal of this program is to characterize advanced composite systems before and after exposures to simulated supersonic cruise environments for real times of up to 50,000 hours. Fatigue data for specimens tested at various temperatures and stress ratios are presented. The changes in properties and the degradation mechanisms during high temperature aging are discussed and illustrated using metallographic and fractographic techniques. Initial results of long term flight simulation tests are presented and compared with wearout model predictions based on accelerated flight simulation exposures.

Haskins, J. F.↗
NASA NTRS2003

New Laboratory Methods for Characterizing the Immersion Factors for Irradiance

The experimental determination of the immersion factor, I(sub f)(lambda), of irradiance collectors is a requirement of any in-water radiometer. The eighth SeaWiFS Intercalibration Round-Robin Experiment (SIRREX-8) showed different implementations, at different laboratories, of the same I(sub f)(lambda) measurement protocol. The different implementations make use of different setups, volumes, and water types. Consequently, they exhibit different accuracies and require different execution times for characterizing an irradiance sensor. In view of standardizing the characterization of I(sub f)(lambda) values for in-water radiometers, together with an increase in the accuracy of methods and a decrease in the execution time, alternative methods are presented, and assessed versus the traditional method. The proposed new laboratory methods include: a) the continuous method, in which optical measurements taken with discrete water depths are substituted by continuous profiles created by removing the water from the water vessel at a constant flow rate (which significantly reduces the time required for the characterization of a single radiometer); and b) the Compact Portable Advanced Characterization Tank (ComPACT) method, in which the commonly used large tanks are replaced by a small water vessel, thereby allowing the determination of I(sub f)(lambda) values with a small water volume, and more importantly, permitting I(sub f)(lambda) characterizations with pure water. Intercomparisons between the continuous and the traditional method showed results within the variance of I(sub f) (lambda) determinations. The use of the continuous method, however, showed a much shorter realization time. Intercomparisons between the ComPACT and the traditional method showed generally higher I(sub f)(lambda) values for the former. This is in agreement with the generalized expectations of a reduction in scattering effects, because of the use of pure water with the ComPACT method versus the use of tap water with the traditional method.

Hooker, Stanford B.↗
DOE OSTI2021

Survey of Advanced Generation IV Reactor Parameters for Integrated Energy System Modeling Capabilities

This paper is to categorize and characterize advanced Generation IV nuclear reactors that are not water based according to the key parameters for the Integrated Energy Systems (IES) project[1]. A key goal of the IES project is to assess the economic viability of including an advanced nuclear reactor into an IES. The landscape of advanced reactors is heterogeneous: several unique designs with different heat profiles are currently being studied and designed. This report provides a high-level perspective of advanced reactor concepts, including primary loop nuclear output temperatures and operation schemes that could affect secondary side power production or storage. For example, this report addresses the type of thermodynamic system (Brayton, supercritical CO 2 [S-CO 2 ], etc.) and the various pressures and temperatures on the secondary side that are expected to be provided by the various primary side reactor types. Based on these characteristics, it may be possible to determine which type of nuclear power plant could be the most economical for analysis in the IES framework for power production coupled with energy storage and waste heat utilization. The results of this effort will serve as input for model development of various secondary side components, concentrating on off-the-shelf capabilities for current and near future secondary side power generation and heat rejection as simulated in TRANSFORM. Generic models can be created which are agnostic of the nuclear energy supply without violating intellectual property rights of the developer. These models can be used to make informed decisions on the economics of integrating various energy system components with nuclear plant designs. Once complete, conclusions may be drawn regarding (1) the economics, efficiency, and reliability of certain nuclear reactors, (2) certain industry processes and energy storage systems, and (3) prioritization of certain reactor types with the studied industry types.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

In-Situ and Ex-Situ Studies on the Morphology Changes of Polymer Pipeline Materials for Use in Hydrogen Gas Environments

The US natural gas infrastructure is a national asset that could be used to deliver hydrogen and hydrogen blends of natural gas as a pathway to reduce carbon emissions. The distribution system comprises nearly 50% plastic pipe composed of medium- and high-density polyethylene materials (MDPE and HDPE). While these materials perform adequately for natural gas, research on their hydrogen compatibility is essential to understand if any immediate and long-term risks are associated with hydrogen addition. The Blended Gas CRADA, a HyBlend project, has established a comprehensive test method for evaluating MDPE and HDPE of various plastic resin compositions of pipeline material in pure hydrogen and 20% hydrogen/80% methane blends. Both in-situ and ex-situ measurements were performed to capture hydrogen-induced changes in the polyethylene material's crystalline, amorphous and their interphase regions. We investigated MDPE and HDPE pipeline materials made from different polymer resin systems to evaluate the effects of hydrogen gas. The materials were characterized by their density, diffusion coefficient, free volume ratio, and degree of crystallinity. Various advanced characterization methods, including in situ NMR, ex situ XRD, ex situ DSC, and ex situ TDA, were used to analyze the effects of changes in crystalline, amorphous, and interphase regions due to gas exposure. Time-dependent post-decompression quasi-static tensile tests were conducted to explore the effects of gas exposure time on the mechanical behavior of the pipe materials. This work will highlight the time sensitivities during and after gas exposure. The correlation between gas-induced polyethylene morphology changes and the associated material performance will be addressed for the intended applications. These studies will show that polyethylene resin composition and material exposure are important factors when considering whether hydrogen gas affects pipeline materials positively or negatively.

Simmons, Kevin L.↗
DOE OSTI2024

Evaluating Optical Techniques to Characterize Solid State Samples for the Pu-238 Supply Program

This report documents steps that have been taken to establish advanced characterization capabilities for solid-state samples to support the 238 Pu Supply Program. The program has already invested significantly in spectroscopy and online monitoring development for liquid processes. Many of the data, analytical methods, and equipment could also be leveraged for the analysis of Np/Pu oxides and Np pellets to help classify material properties and link them to operations. The techniques described in this work include diffuse reflectance spectroscopy (DRS), Raman spectroscopy, and laser-induced breakdown spectroscopy (LIBS). Each technique is sensitive to various chemical and/or elemental species and can provide complimentary information to more standard methods such as powder x-ray diffraction and scanning electron microscopy. These options are remotely deployable via fiber-optic cables. DRS and Raman spectroscopy are already approved for glove box and hot cell work, but LIBS requires US Department of Energy approval for incorporation. Raman spectroscopy does require laser shielding, which means that DRS is the easiest method to implement. However, each technique provides complimentary data, and the most robust sample characterization could be achieved when all three, among other methods, are harnessed together. This report documents some of the progress made testing these capabilities, some of the challenges, and next steps to optimize the technology and integration strategies.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Advanced Data Science Model for Detecting Intelligent Malware

This study focused on developing a robust artificial intelligence (AI) model capable of detecting and characterizing advanced malware in Internet of Things (IoT) devices using network data. By analyzing network traffic with various machine learning (ML) models, our AI model can identify and characterize malicious activities to significantly improve malware detection accuracy and reliability as compared to traditional methods. The developed AI/ML model was trained using network data from IoT devices, leveraging classifiers such as Random Forest, Gradient Boosting, AdaBoost, and others to optimize detection performance. This project demonstrates a scalable framework for real-time malware detection and characterization in IoT networks, capable of identifying infected devices and facilitating the necessary steps to remove or isolate them, thereby preventing further infections. Although digital twin (DT) integration is not yet implemented in the current model, it represents a promising future enhancement. By creating a virtual replica of physical IoT devices, DT technology would allow for real-time monitoring and analysis without directly accessing operational technology, thus reducing the risk of compromising or reducing the performance of actual devices. This integration would further enhance the security of IoT ecosystems, combining AI technology to better flag and detect indications of malware-infected devices within a nuclear system environment.

42 ENGINEERING↗
DOE OSTI2022

Innovative Method for Welding in Generation 3 CSP to Enable Reliable Manufacturing of Solar Receivers to withstand Daily Cycling at Temperatures Above 700°C (Final Technical Report)

Inconel® Alloy 740H® (alloy 740H) was the first age-hardenable nickel-based alloy approved by the ASME Boiler & Pressure Vessel Code for use in pressure-boundary applications. Over the past ~20 years the alloy has been optimized for weldability and high-temperature stability, approved for use in different applications. Development of a supply chain combined with the advantageous properties of the alloy (high-temperature creep strength, oxidation and corrosion resistance, etc.) have resulted in the alloy being applied to new high-temperature power cycle demonstration projects, and of particular interest are applications to concentrating solar power (CSP) to enable higher-efficiency Generation 3 CSP systems and the corresponding supercritical CO 2 (sCO 2 ) power cycle components (heat exchangers, piping, etc.). The high allowable stresses of alloy 740H also make it a desirable material for current Generation 2 CSP solar power receivers to improve cyclic capability and/or reduce receiver height. Recent experiences in demonstration projects utilizing alloy 740H identified cracking issues during welding and fabrication. In this project, a detailed study was done to confirm and clarify the Stress Relaxation Cracking (SRxC) mechanism, also known as stress relief cracking or strain-age cracking (SAC), during post-weld heat-treatment (PWHT). This involved detailed microscopy and advanced characterization to understand the root cause(s) of three failures obtained from industry. Based in-part on these findings, a targeted laboratory based SRxC test method was utilized to evaluate variables such as heat-to-heat variations, strain level, PWHT temperature, and starting material condition on three heats of alloy 740H. Industrial shop welding of cold-worked plates was also conducted. The research showed the following: SRxC was confirmed as the cracking mechanism for all field failures; Stress state (from residual stresses, constraint, deformation, and local stress concentrations) was playing a significant role in field failures and laboratory testing confirmed increasing susceptibility for all heats with increasing strain levels. High levels of microstructural strain were identified at crack initiation locations, in some cases leading to local recrystallization; Precipitate free zones (PFZs) at grain boundaries were found at relaxation cracks and crack initiation locations uniquely associated with SRxC in alloy 740H. Laboratory testing reproduced this microstructural feature which had only previously been reported in long-term creep testing of weldments. Advanced nano-scale characterization confirmed the presence of a moving boundary leading to coarsening of precipitates and PFZs where damage accumulated; The research suggested heat-to-heat variations due to local chemistry and processing may influence SRxC susceptibility, but more work is needed to fully clarify these effects. To disseminate the key learnings from this research to the scientific and engineering communities and alloy 740H end users, multiple technical publications and presentations were made, an industrial alloy 740H users meeting was held, and a new industry guideline specification document which can be directly implemented by end-users of alloy 740H was produced.

14 SOLAR ENERGY↗
NASA NTRS2006

Large Engine Technology (LET) Short Haul Civil Tiltrotor Contingency Power Materials Knowledge and Lifing Methodologies

This report documents the results of an experimental program conducted on two advanced metallic alloy systems (Rene' 142 directionally solidified alloy (DS) and Rene' N6 single crystal alloy) and the characterization of two distinct internal state variable inelastic constitutive models. The long term objective of the study was to develop a computational life prediction methodology that can integrate the obtained material data. A specialized test matrix for characterizing advanced unified viscoplastic models was specified and conducted. This matrix included strain controlled tensile tests with intermittent relaxtion test with 2 hr hold times, constant stress creep tests, stepped creep tests, mixed creep and plasticity tests, cyclic temperature creep tests and tests in which temperature overloads were present to simulate actual operation conditions for validation of the models. The selected internal state variable models where shown to be capable of representing the material behavior exhibited by the experimental results; however the program ended prior to final validation of the models.

Spring, Samuel D.↗
DOE OSTI2024

Multi-Modal Characterization of Interfacial Corrosion of Ni-based Alloys in Chloride-based Molten Salts

The United States Department of Energy (DOE) is committed to the advancement of nuclear reactor technology through initiatives such as the Advanced Reactor Development Program (ARDP), to diversify the United States energy portfolio towards more sustainable energy options. The ARDP includes demonstration by industry partners of molten salt fast reactors (MSRs). Construction of molten salt reactor technology requires qualified nuclear structural materials. Unfortunately, there are no current materials that meet current qualification requirements dictated by the Nuclear Regulatory Commission for construction of MSRs. Adapting current structural material qualifications requires expansion of our current knowledgebase on corrosion performance. In this investigation, we assess microstructural changes in a Ni-based superalloy after exposure to a chloride-containing salt system through a correlated multi-modal approach combining several advanced characterization techniques. Namely we will highlight the impact of grain boundary phenomena at the onset of corrosion attack, including the role of intergranular crack propagation and development of internal corrosion products. The findings from this investigation will further expand our assessment of the corrosion performance of structural materials being investigated for construction of MSR components.

36 - MATERIALS SCIENCE↗
DOE OSTI2020

Impurity Characterization in Device Quality Hot Filament Chemical Vapor Deposition (HFCVD) Grown 3C Silicon Carbide (3C-SiC) (CRADA CRD-17-00684 Final Report)

BASiC-3C needs advanced characterization of material properties to continue making progress towards high quality 3C-SiC. For over 190 growth runs, BASiC 3C has relied almost exclusively on feedback from commercially available metrology such as cross-sectional FESEM, AFM, Raman, XRD and SIMS. This standard feedback loop has enabled BASiC 3C to "rough-in" growth conditions and achieve growth of epitaxial growth over a 4" wafer size, at respectable growth rates. Still, the material quality deduced from X-ray rocking FWMH and APB density must be further improved to be viable for our industry partners. Electron Spin Resonance (EPR) and time-resolved photoluminescence (TRPL) data and interpretation by an experienced scientist is identified as a critical, yet not commercially readily available feedback that would enable further material improvement.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Inorganometallic Catalyst Design Center (ICDC) EFRC Accomplishments

The ICDC focused largely on heterogeneous catalysis of oxidative chemical transformations, especially those that came to prominence as natural gas (wet shale gas) supplanted crude oil as the primary feedstock in North America for carbon-based manufacturing of commodity chemicals. Driven by fracking-enabled access to enormous stores of shale-trapped wet gas, the feedstock change from oil to gas enabled a shift away from high-temperature catalytic breakdown of large hydrocarbons to catalytic build-up of C4, C3, C2, and C1 into desired intermediates, but now at much more modest temperatures. In turn, the much lower thermal force accompanying these kinds of reactions facilitates catalyst stabilization and characterization, including operando characterization, while slowing on-stream catalyst evolution (i.e., preserving catalyst structure), accommodating catalyst complexity, and enabling creation of uniform arrays of heterogeneous catalysts with single-atom or near-single-atom precision—at least for model systems. Together these features have proven to be a boon to hypothesis-driven catalysis science and to experimentally testable computation-based design advances and mechanism explication. The ICDC has greatly facilitated the integration of catalyst synthesis, advanced characterization, performance assessment, and computational elucidation—with advances in each of these realms spurring achievements in catalysis science and complementary realms.

03 NATURAL GAS↗
NASA NTRS1985

Generation-V dual-Purkinje-image eyetracker

Major advances characterize the Generation-V dual-Purkinje-image eyetracker compared with the Generation-III version previously described. These advances include a large reduction in size, major improvements in frequency response and noise level, automatic alignment to a subject, and automatic adjustment for different separation between the visual and optic axes, which can vary considerably from subject to subject. In a number of applications described in the paper, the eyetracker is coupled with other highly specialized optical devices. These applications include accurately stabilizing an image on a subject's retina; accurately simulating a visually dead retinal region (i.e., a scotoma) of arbitrary shape, size, and position; and, for clinical purposes, stabilizing the position of a laser coagulator beam on a patient's retina so that the point of contact is unaffected by the patient's own eye movements.

Crane, H. D.↗
DOE OSTI2020

ACS Sustainable Chemistry & Engineering Virtual Special Issue on Recent Advances in Biomass Characterization and Modeling

Recognizing the importance of biomass characterization and modeling, a virtual special issue (VSI) entitled Recent Advances in Biomass Characterization and Modeling was organized to showcase the recent contributions to this emerging field. This VSI features contributions from leading scientists in the biorefinery field, intending to provide the readers with the latest advances in analytical methodology and modeling to characterize biomass feedstocks and biomass-derived products. Further, the VSI contains perspectives and research articles. Advanced analytical methods that measure the mechanical, chemical, physical, biological, and other properties of biomass and biomass pyrolysis products are described along with their application’s limitations in two perspectives. Biomass is a multicomponent/multiscale, complex, nonconducting, and highly heterogeneous material; thus, it could be problematic for many characterization techniques. Traditional biomass analysis tools that are slow, laborious, and generally require harsh reagents have been replaced or supplemented by simpler and more rapid chromatographic and spectroscopic approaches such as GC-MS, HPLC, FTIR, Raman, and NMR spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

An efficient instance segmentation approach for studying fission gas bubbles in irradiated metallic nuclear fuel

Abstract Gaseous fission products from nuclear fission reactions tend to form fission gas bubbles of various shapes and sizes inside nuclear fuel. The behavior of fission gas bubbles dictates nuclear fuel performances, such as fission gas release, grain growth, swelling, and fuel cladding mechanical interaction. Although mechanical understanding of the overall evolution behavior of fission gas bubbles is well known, lacking the quantitative data and high-level correlation between burnup/temperature and microstructure evolution blocks the development of predictive models and reduces the possibility of accelerating the qualification for new fuel forms. Historical characterization of fission gas bubbles in irradiated nuclear fuel relied on a simple threshold method working on low-resolution optical microscopy images. Advanced characterization of fission gas bubbles using scanning electron microscopic images reveals unprecedented details and extensive morphological data, which strains the effectiveness of conventional methods. This paper proposes a hybrid framework, based on digital image processing and deep learning models, to efficiently detect and classify fission gas bubbles from scanning electron microscopic images. The developed bubble annotation tool used a multitask deep learning network that integrates U-Net and ResNet to accomplish instance-level bubble segmentation. With limited annotated data, the model achieves a recall ratio of more than 90%, a leap forward compared to the threshold method. The model has the capability to identify fission gas bubbles with and without lanthanides to better understand the movement of lanthanide fission products and fuel cladding chemical interaction. Lastly, the deep learning model is versatile and applicable to the micro-structure segmentation of similar materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Engineering Innovations, Challenges, and Opportunities for Lignocellulosic Biorefineries: Leveraging Biobased Polymer Production

Alternative polymer feedstocks are highly desirable to address environmental, social, and security concerns associated with petrochemical-based materials. Lignocellulosic biomass (LCB) has emerged as one critical feedstock in this regard because it is an abundant and ubiquitous renewable resource. LCB can be deconstructed to generate valuable fuels, chemicals, and small molecules/oligomers that are amenable to modification and polymerization. However, the diversity of LCB complicates the evaluation of biorefinery concepts in areas including process scale-up, production outputs, plant economics, and life-cycle management. We discuss aspects of current LCB biorefinery research with a focus on the major process stages, including feedstock selection, fractionation/deconstruction, and characterization, along with product purification, functionalization, and polymerization to manufacture valuable macromolecular materials. We highlight opportunities to valorize underutilized and complex feedstocks, leverage advanced characterization techniques to predict and manage biorefinery outputs, and increase the fraction of biomass converted into valuable products.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2015

Embedded Thermal Control for Subsystems for Next Generation Spacecraft Applications

Thermal Fluids and Analysis Workshop, Silver Spring MD NCTS 21070-15. NASA, the Defense Department and commercial interests are actively engaged in developing miniaturized spacecraft systems and scientific instruments to leverage smaller cheaper spacecraft form factors such as CubeSats. This paper outlines research and development efforts among Goddard Space Flight Center personnel and its several partners to develop innovative embedded thermal control subsystems. Embedded thermal control subsystems is a cross cutting enabling technology integrating advanced manufacturing techniques to develop multifunctional intelligent structures to reduce Size, Weight and Power (SWaP) consumption of both the thermal control subsystem and overall spacecraft. Embedded thermal control subsystems permit heat acquisition and rejection at higher temperatures than state of the art systems by employing both advanced heat transfer equipment (integrated heat exchangers) and high heat transfer phenomena. The Goddard Space Flight Center Thermal Engineering Branch has active investigations seeking to characterize advanced thermal control systems for near term spacecraft missions. The embedded thermal control subsystem development effort consists of fundamental research as well as development of breadboard and prototype hardware and spaceflight validation efforts. This paper will outline relevant fundamental investigations of micro-scale heat transfer and electrically driven liquid film boiling. The hardware development efforts focus upon silicon based high heat flux applications (electronic chips, power electronics etc.) and multifunctional structures. Flight validation efforts include variable gravity campaigns and a proposed CubeSat based flight demonstration of a breadboard embedded thermal control system. The CubeSat investigation is technology demonstration will characterize in long-term low earth orbit a breadboard embedded thermal subsystem and its individual components to develop optimized operational schema.

Spacecraft Systems↗
DOE OSTI2026

Rational design of heterogeneous single-site catalysts via surface organometallic chemistry

Single-site heterogeneous catalysts offer an attractive route to unite the molecular precision of homogeneous catalysis with the durability and practical advantages of solids. Surface organometallic chemistry (SOMC) provides a particularly powerful strategy for this purpose by grafting molecular precursors onto tailored surfaces and converting support functionalities into ligand environments for isolated metal centers. As a result, SOMC brings the language and logic of coordination chemistry to heterogeneous catalysis, where the support becomes an integral part of the active site coordination sphere. This Review surveys recent progress in the rational design of SOMC-derived single-site catalysts, with emphasis on synthetic routes, post synthetic transformations, and the deliberate tuning of catalytic behavior through metal-support interactions. Discussions are made on how support identity, hydroxyl topology, acidity, and redox activity shape the geometry, electronic structure, and oxidation state of supported metal sites, as well as how these factors determine activity, selectivity, and stability. We also examine a central limitation of these systems: despite their molecularly informed design, supported single sites often exist as structurally distributed ensembles rather than uniform species, particularly on amorphous supports. This site heterogeneity, along with catalyst dynamics under operating conditions, remains a major barrier to definitive structure-activity relationships. Therefore, emerging approaches that combine advanced characterization, first-principles modeling, ensemble kinetics, and machine learning to resolve active-site structure and guide catalyst development are highlighted. Together, these advances position SOMC as a versatile coordination chemistry framework for the predictive design of heterogeneous catalysts with well-defined molecularly tailored active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗