Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMORPHOUS STATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7

Damage and Microstructure Evolution in GaN under Au Ion Irradiation

Damage and microstructure evolution in gallium nitride (GaN) under Au+ ion irradiation has been investigated using complementary electron microscopy, secondary ion mass spectrometry and ion beam analysis techniques. Epitaxially-grown GaN layers (2-um-thick) have been irradiated by 2.0 MeV Au ions to 1.0 × 1015 and 1.4 × 1015 cm-2 at 155 K and 7.3 × 1015 cm-2 at 200 K. The irradiation-induced damage has been analyzed by Rutherford backscattering spectroscopy in a channeling direction (RBS/C). For a better determination of ion-induced disorder profile, an iterative procedure and a Monte Carlo code (McChasy) are combined to analyze the ion channeling spectra. With increasing irradiation dose, separated amorphous layers develop from the sample surface and near the damage peak region. Formation of large nitrogen bubbles with sizes up to 70 nm is observed in the buried amorphous layer, while the surface layer contains small bubbles with diameter of a few nanometers due to significant nitrogen loss from the surface. Volume expansion from 3% to 25% in the irradiated region is suggested by cross sectional transmission electron microscope and RBS/C measurement. The anomalous shape of the Au distributions under three irradiations indicates out-diffusion of Au toward sample surface. The results from the complementary techniques suggest that nitrogen is retained in the damaged GaN where the crystallinity is preserved. Once the amorphous state is reached in the surface region, GaN starts to decompose and nitrogen escapes from the surface. Furthermore, experimental results show considerable errors in both disorder profile and ion range predicted by the Stopping and Range of Ions in Matter code, indicating a significant overestimation of electronic stopping powers of Au ions in GaN.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solution combustion synthesis of CeO{sub 2}-CeAlO{sub 3} nano-composites by mixture-of-fuels approach

Nano-composites of CeO{sub 2}-CeAlO{sub 3} are synthesised by solution combustion method employing (a) urea and (b) a mixture of urea and glycine as fuels with corresponding metal nitrates. The as-prepared powders are all nano-sized (5-30 nm) and the same is confirmed by broadening of the X-ray diffraction peaks and transmission electron microscopy. A starting composition of Ce:Al in the atomic ratio 4:6 gives rise to different phases depending on the fuel being used for combustion. When urea alone is used as fuel, nano-crystalline CeO{sub 2} phase is formed with Al{sub 2}O{sub 3} being in the amorphous state. When the mixture of fuels is used, a mixture of nano-sized CeO{sub 2} and CeAlO{sub 3} phases is obtained. However, upon sintering at 1400 deg. C in air, the stable phases CeO{sub 2} and {alpha}-Al{sub 2}O{sub 3} are formed in both the cases. Combustion synthesis using mixture-of-fuels is proposed to be a route to stabilise low oxidation compounds such as CeAlO{sub 3}.

36 MATERIALS SCIENCE↗

The effect of Ta doping in polycrystalline TiO{sub x} and the associated thin film transistor properties

Tantalum (Ta) is suggested to act as an electron donor and crystal phase stabilizer in titanium oxide (TiO{sub x}). A transition occurs from an amorphous state to a crystalline phase at an annealing temperature above 300 °C in a vacuum ambient. As the annealing temperature increases from 300 °C to 450 °C, the mobility increases drastically from 0.07 cm{sup 2}/Vs to 0.61 cm{sup 2}/Vs. The remarkable enhancement of thin film transistor performance is suggested to be due to the splitting of Ti 3d band orbitals as well as the increase in Ta{sup 5+} ions that can act as electron donors.

36 MATERIALS SCIENCE↗

Composition dependence of structural and optical properties of Ge{sub x}Se{sub 100−x} semiconducting thin films

The studied thin films of Ge{sub x}Se{sub 100−x} compositions were synthesized with thermal evaporation technique at room temperature. The effect of composition on the structure of the prepared films was characterized by X-ray diffraction and scanning electron microscopy. The stoichiometry of the studied compositions was examined by energy dispersive X-ray spectroscopy. The film thickness and refractive index were calculated by Swanepoel’s method. The structural analysis showed that the as-prepared Ge{sub x}Se{sub 100−x} (x = 10, 15, 20 and 30 at.%) films exhibit the amorphous state while other films containing 25, 35 and 40 at.% of Ge are polycrystalline. On the other hand, the GeSe and Se crystalline phases are obtained for the annealed films. The analysis of the optical spectra showed that E{sub g} increases with increasing Ge content up to a x = 30 at.% and then decreases with further increase of the Ge concentration. Other many optical parameters such as optical conductivity, dispersion energy and dissipation factor were determined and strongly affected by the variation of the composition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Analysis of the degradation induced by focused ion Ga{sup 3+} beam for the realization of piezoelectric nanostructures

Piezoelectric nanostructures (islands of dimensions in the lateral size range 50-500 nm) have been fabricated by focused Ga{sup 3+} ion beam (FIB) etching on PbZr{sub 0.54}Ti{sub 0.46}O{sub 3} thin films obtained by magnetron sputtering. The degradation induced by the etching process is investigated through the evolution of electromechanical activity measured by means of local piezoelectric hysteresis loops produced by piezoresponse force microscopy. The analysis of surface potential is performed by kelvin force microscopy and the measurement of current-voltage curves is carried out by conducting atomic force microscopy. Two kinds of structures, namely one based on crystallized films and the other based on amorphous ones, were studied. In this latter case, the amorphous films are postannealed after etching to obtain crystallized structure. For the structures based on the crystallized and then etched films, no piezoelectric signal was registered that evidences a serious degradation of material induced by Ga{sup 3+} ion implantation. For the structures based on the films etched in amorphous state and then crystallized, the piezoresponse signal was near to that of the reference films (crystallized and not etched) whatever were the ion dose and the island dimensions. Even for very small lateral size (50 nm), no size effect was observed. The island shapes fabricated by Ga{sup 3+} FIB etching process (islands with less than 50 nm lateral size) show a limitation of FIB processing and electron beam lithography seems to be necessary.

36 MATERIALS SCIENCE↗

Recrystallization of an amorphized epitaxial phase-change alloy: A phoenix arising from the ashes

Epitaxial Ge{sub 2}Sb{sub 2}Te{sub 5} films grown on Si(111) by molecular beam epitaxy were reversibly switched between crystalline and amorphous states over a large area using femtosecond laser pulses. The structural and spatial homogeneity of the as-grown epitaxial and laser-switched areas on the sample were investigated by synchrotron nanofocus high resolution x-ray diffraction. The investigation clearly demonstrated that the single crystalline metastable cubic phase of Ge{sub 2}Sb{sub 2}Te{sub 5} is restored after switching. No polycrystalline features, not only on the average but even on the nanometer scale of the x-ray beam, were observed.

36 MATERIALS SCIENCE↗

Electrical and optical properties of nitrogen doped SnO{sub 2} thin films deposited on flexible substrates by magnetron sputtering

Graphical abstract: The best SnO{sub 2}:N TCO film: about 80% transmittance and 9.1 × 10{sup −4} Ω cm. - Highlights: • Nitrogen-doped tin oxide film was deposited on PET by RF-magnetron sputtering. • Effects of oxygen partial pressure on the properties of thin films were investigated. • For SnO{sub 2}:N film, visible light transmittance was 80% and electrical resistivity was 9.1 × 10{sup −4} Ω cm. - Abstract: Nitrogen-doped tin oxide (SnO{sub 2}:N) thin films were deposited on flexible polyethylene terephthalate (PET) substrates at room temperature by RF-magnetron sputtering. Effects of oxygen partial pressure (0–4%) on electrical and optical properties of thin films were investigated. Experimental results showed that SnO{sub 2}:N films were amorphous state, and O/Sn ratios of SnO{sub 2}:N films were deviated from the standard stoichiometry 2:1. Optical band gap of SnO{sub 2}:N films increased from approximately 3.10 eV to 3.42 eV as oxygen partial pressure increased from 0% to 4%. For SnO{sub 2}:N thin films deposited on PET, transmittance was about 80% in the visible light region. The best transparent conductive oxide (TCO) deposited on flexible PET substrates was SnO{sub 2}:N thin films preparing at 2% oxygen partial pressure, the transmittance was about 80% and electrical conductivity was about 9.1 × 10{sup −4} Ω cm.

36 MATERIALS SCIENCE↗

Spectroscopic ellipsometry and x-ray photoelectron spectroscopy of La{sub 2}O{sub 3} thin films deposited by reactive magnetron sputtering

Lanthanum oxide (La{sub 2}O{sub 3}) films were grown by the reactive dc magnetron sputtering and studied their structural, chemical and optical parameters. La{sub 2}O{sub 3} films were deposited onto Si substrates by sputtering La-metal in a reactive gas (Ar+O{sub 2}) mixture at a substrate temperature of 200 deg. C Reflection high-energy electron diffraction measurements confirm the amorphous state of La{sub 2}O{sub 3} films. Chemical analysis of the top-surface layers evaluated with x-ray photoelectron spectroscopy indicates the presence of a layer modified by hydroxylation due to interaction with atmosphere. Optical parameters of a-La{sub 2}O{sub 3} were determined with spectroscopic ellipsometry (SE). There is no optical absorption over spectral range {lambda}=250-1100 nm. Dispersion of refractive index of a-La{sub 2}O{sub 3} was defined by fitting of SE parameters over {lambda}=250-1100 nm.

36 MATERIALS SCIENCE↗

New Nanosized Luminophores Obtained via Evaporation of REE Silicates and Germanates

Nanophosphors in the amorphous state are first obtained via pulsed electron beam evaporation of targets made of polycrystalline phosphors with the compositions Ca{sub 2}M{sub 8}(SiO{sub 4}){sub 6}O{sub 2}:Eu (M = Y and Gd) and Ca{sub 2}La{sub 8}(GeO{sub 4}){sub 6}O{sub 2}:Eu with the structure of oxyapatite. Reduction of ions Eu{sup 3+} → Eu{sup 2+} in the electron beam is found. Modification of the Raman scattering (RS) spectra of the samples in the case of a decrease in the size of the particles from bulk to a nanosized state is found. The change in the forbidden band width E{sub g} of the samples in the case of transition from a bulk powder to an NP is considered. The spectral and luminescence characteristics of the samples in the polycrystalline and nanoamorphous states are studied. It is shown that, in the case of transition to nanosamples, the ligand field around Eu{sup 2+} changes. This may be due to the violation of the translational symmetry in the NP. The bond between the 4f and 5d electrons weakens. Degeneracy of the {sup 2}e{sub g} level appears. Presumably, the reduction of ions Eu{sup 3+} → Eu{sup 2+} in the electron beam due to the breaking of the Si(Ge)–O bond in the process of evaporation of the samples and capture of the released electron by the Eu{sup 3+} ions is found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sub-nanosecond laser-induced structural changes in the phase change material Ge2Sb2Te5 measured by an optical pump/x-ray probe technique

Phase-change alloys are characterized by reversible switching between amorphous and crystalline phases either by laser irradiation or by an electric programming current; the resulting changes in material properties can be used for non-volatile data storage. Switching typically occurs on nanosecond or less time scales. Considering the conflicting requirements for high-speed switching, yet long term data storage integrity, a deeper understanding of the switching processes in these materials is essential for insightful application development. Although, high-speed optical pump/probe observations have been made of reflectivity changes during the Ge{sub 2}Sb{sub 2}Te{sub 5} switching process, due to the nanosecond order time scales involved little is known about the corresponding changes in structure. In addition as the amorphous phase does not diffract, its structural analysis is not amenable to analysis by high-speed diffraction techniques. We have used synchrotron-based time-resolved x-ray absorption fine structure spectroscopy (XAFS), a technique equally suitable for amorphous and crystalline phases to elaborate details in structural changes in the phase-change process. We report on two experiments using high-speed pulsed lasers that serve as optical pumps to induced material changes followed by synchrotron produced x-ray burst that serve as a time resolved structural probe. The first experiment carried out at the Advanced Photon source focuses on changes due to heating in the amorphous phase. Our experimental results indicate that the maximum temperature reached during the re-amorphization process are less than the melting point indicated in the bulk phase diagram of Ge{sub 2}Sb{sub 2}Te{sub 5} reaching a maximum temperature of 620 C and in addition, do not share the same bond length distribution of a true melt. These findings strongly suggest the possibility of non-thermal melting. In the second experiment, we have obtained near-edge x-ray absorption data for a Ge{sub 2}Sb{sub 2}Te{sub 5} film in the process of transforming from the crystalline to the amorphous phase. This was accomplished by use of a second re-crystallizing laser in addition to the amorphous state induced fast pulsed laser. In the experiment presented here a 500 ps, 532 nm high-power pump laser was focused to a spot size of 20 {micro}m via the silica substrate onto a 50 {micro}m thick Ge{sub 2}Sb{sub 2}Te{sub 5} layer with a power density of approximately 60 mJ/cm{sup 2}; the layer was capped to prevent oxidation by air. Concentric to the laser beam, a 1 x 2.5 {micro}m x-ray pulse generated from a single electron bunch in the storage ring at Spring-8 was directed to the front side side of the sample. The relative delay of the laser with respect to the x-ray pulse was varied in steps of 500 ps in the current experiment. The presence of a 30 nm thick (ZnS){sub 0.85}(SiO{sub 2}){sub 0.15} layer above the Ge{sub 2}Sb{sub 2}Te{sub 5} layer caused the Ge{sub 2}Sb{sub 2}Te{sub 5} located below the layer spot to transform from a crystalline starting phase to an amorphous high-temperature phase and then back to a crystalline phase due to the trapped heat.

43 PARTICLE ACCELERATORS↗

Photopolymerization-induced crystallization and phase separation in poly(ethylene oxide)/triacrylate blends

The present article describes experimental and theoretical investigations of miscibility and crystallization behavior of blends of poly(ethylene oxide) (PEO) and triacrylate monomer (TA) using differential scanning calorimetry and optical microscopy. The PEO/TA blends manifested a single T{sub g} varying systematically with composition suggestive of a miscible character in their amorphous states. Moreover, there occurs melting point depression of PEO crystals with increasing TA. A phase diagram was subsequently established that exhibited a solid+liquid coexistence region bound by the liquidus and solidus lines, followed by an upper critical solution temperature (UCST) at a lower temperature. The emerging phase morphology was investigated to verify the coexistence regions. Upon photopolymerization in the isotropic melt above the melting point depression curve, both the UCST and the melting temperatures move upward and eventually surpass the reaction temperature, resulting in phase separation as well as crystallization of PEO driven by the changing supercooling, i.e., the thermodynamic driving force. Of particular interest is the interplay between photopolymerization-induced phase separation and crystallization, which eventually determines the final phase morphology of the PEO/TA blend such as crystalline lamellae, sheaf, or spherulites in isotropic liquid, phase separated domains, and viscous fingering liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The melting of stable glasses is governed by nucleation-and-growth dynamics

We discuss the microscopic mechanisms by which low-temperature amorphous states, such as ultrastable glasses, transform into equilibrium fluids, after a sudden temperature increase. Experiments suggest that this process is similar to the melting of crystals, thus differing from the behaviour found in ordinary glasses. We rationalize these observations using the physical idea that the transformation process takes place close to a “hidden” equilibrium first-order phase transition, which is observed in systems of coupled replicas. We illustrate our views using simulation results for a simple two-dimensional plaquette spin model, which is known to exhibit a range of glassy behaviour. Our results suggest that nucleation-and-growth dynamics, as found near ordinary first-order transitions, is also the correct theoretical framework to analyse the melting of ultrastable glasses. Our approach provides a unified understanding of multiple experimental observations, such as propagating melting fronts, large kinetic stability ratios, and “giant” dynamic length scales. We also provide a comprehensive discussion of available theoretical pictures proposed in the context of ultrastable glass melting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermally stimulated crystallization of (20-x)LiO{sub 2}-80TeO{sub 2}-xWO{sub 3} glass system

Tellurite glasses of the (20-x)LiO{sub 2}-80TeO{sub 2}-xWO{sub 3} system were synthesized (x=0, 5, and 10) and annealed at different temperatures, and the crystallization kinetics was studied using XRD, FTIR spectroscopy, and DSC techniques. XRD data evidenced the amorphous state of as-quenched samples, while thermally treated samples showed the growth of crystalline phases. FTIR spectroscopy was used to observe the evolution of the vibrational mode assigned to the TeO{sub 2} phases. The presence of {gamma}-TeO{sub 2}, {alpha}-TeO{sub 2}, and {alpha}-Li{sub 2}Te{sub 2}O{sub 5} crystalline phases was observed for the sample TL, x=0, while only the first and second phases were observed for TLW5 and TLW10 samples, x=5 and 10, respectively, suggesting that WO{sub 3} enters the structure preferentially as glass former, inhibiting the growth of the phase {alpha}-Li{sub 2}Te{sub 2}O{sub 5}. -- Graphical abstract: Typical DSC thermogram for TLW glasses for different heating rates with insert graphic showing as the Tg is evaluated. Display Omitted Highlights: {yields} The crystallization kinetics was studied using XRD, FTIR spectroscopy, and DSC techniques. {yields} The glass transition and maximum crystallization temperatures increase when the WO{sub 3} content in the glass composition was increased. {yields} The observed asymmetry of crystallization peaks suggests an overlapping of distinct crystallization phases ({alpha}- and {gamma}-TeO{sub 2}). {yields} The WO{sub 3} enters the structure as glass former and does not participate in the crystallization of glass.

36 MATERIALS SCIENCE↗

Radiation-Induced Solid-State Transformations of Uranyl Peroxides

Single-crystal X-ray diffraction studies of pristine and γ-irradiated Ca 2 [UO 2 (O 2 ) 3 ]·9H 2 O reveal site-specific atomic-scale changes during the solid-state progression from a crystalline to X-ray amorphous state with increasing dose. Following γ-irradiation to 1, 1.5, and 2 MGy, the peroxide group not bonded to Ca 2+ is progressively replaced by two hydroxyl groups separated by 2.7 Å (with minor changes in the unit cell), whereas the peroxide groups bonded to Ca 2+ cations are largely unaffected by irradiation prior to amorphization, which occurs by a dose of 3 MGy. The conversion of peroxide to hydroxyl occurs through interaction of neighboring lattice H 2 O molecules and ionization of the peroxide O–O bond, which produces two hydroxyls, and allows isolation of the important monomer building block, UO 2 (O 2 ) 2 (OH) 2 4– , that is ubiquitous in uranyl capsule polyoxometalates. Steric crowding in the equatorial plane of the uranyl ion develops and promotes transformation to an amorphous phase. In contrast, γ-irradiation of solid Li 4 [(UO 2 )(O 2 ) 3 ]·10H 2 O results in a solid-state transformation to a well-crystallized peroxide-free uranyl oxyhydrate containing sheets of equatorial edge and vertex-sharing uranyl pentagonal bipyramids with likely Li and H 2 O in interlayer positions. The irradiation products of these two uranyl triperoxide monomers are compared via X-ray diffraction (single-crystal and powder) and Raman spectroscopy, with a focus on the influence of the Li + and Ca 2+ countercations. Highly hydratable and mobile Li+ yields to uranyl hydrolysis reactions, while Ca 2+ provides lattice rigidity, allowing observation of the first steps of radiation-promoted transformation of uranyl triperoxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Influence of Relative Content of a Metal Component in a Dielectric Matrix on the Formation and Dimensions of Cobalt Nanocrystallites in Co{sub x}(MgF{sub 2}){sub 100 –} {sub x} Film Composites

The influence of relative content of a metal component on the phase composition and substructure of Co{sub x}(MgF{sub 2}){sub 100 –} {sub x} in a wide range of x = 16–63 at % is studied by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and infrared (IR) spectroscopy. The layers of nanocomposite with a micron thickness have been obtained by the ion-beam sputtering of the target in the argon environment. The results reveal that the relative metal cobalt content in the MgF{sub 2} dielectric matrix strongly affects the phase composition and substructure of nanocomposites. With a lower content of cobalt, it is in the amorphous state in the form of clusters in the MgF{sub 2} nanocrystalline matrix. An increase of cobalt content to x = 29 at % on a sitall substrate and to x = 42 at % on a glass substrate in the X-ray amorphous MgF{sub 2} dielectric matrix leads to the formation of cobalt nanocrystals with a hexagonal crystallographic system, whose sizes are on the order of 10 nm. These are predominately oriented in the basis plane of the (001) hexagonal lattice of α-Со. A further increase of cobalt content to c = 59 at % enlarges the α-Со nanocrystals to ~20 nm with retaining the same orientation. In accordance with a fine structure analysis of XPS spectra of Со 2p and О 1s, cobalt is strongly oxidized on the surface of all the composites; only on the surface of samples with a low content of Co is X‑ray amorphous cobalt found in a metallic state along with cobalt oxide. The IR spectra of these samples with the lowest metal phase content exhibit the pronounced modes from the nanocrystalline MgF{sub 2} dielectric phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The reaction mechanism of SnSb and Sb thin film anodes for Na-ion batteries studied by X-ray diffraction, 119 Sn and 121 Sb Mössbauer spectroscopies

The electrochemical reaction of Sb and SnSb anode materials with Na results in the formation of amorphous materials. To understand the resulting phases and electrochemical capacities we studied the reaction products local order using 119 Sn and 121 Sb Mössbauer spectroscopies in conjunction with measurements performed on model powder compounds of Na-Sn and Na-Sb to further clarify the reactions steps. For pure Sb the discharge (sodiation) starts with the formation of an amorphous phase composed of atomic environments similar to those found in NaSb, and proceeds further by the formation of environments similar to that present in Na 3 Sb. The reversible reaction takes place during a large portion of the charge process. At full charge the anode material still contains a substantial fraction of Na, which explains the lack of recrystallization into crystalline Sb. The reaction of SnSb yields Na 3 Sb crystalline phase at full discharge at higher temperatures (65 and 95°C) while the room temperature reaction yields amorphous compounds. The electrochemically-driven, solid-state amorphization reaction occurring at room temperature is governed by the simultaneous formation of Na-coordinated Sn and Sb environments, as monitored by the decrease (increase) of the 119 Sn ( 121 Sb) Mössbauer isomer shifts. Overall, the monitoring of the hyperfine parameters enables to correlate the changes in Na content to the individual Sn and Sb local chemical environments.

25 ENERGY STORAGE↗

Electronic Origin For The Phase Transition From Amorphous LixSi To Crystalline Li15Si4

Silicon has been widely explored as an anode material for lithium ion battery. Upon lithiation, silicon transforms to amorphous LixSi (a-LixSi) via electrochemical driven solid state amorphization. With increasing lithium concentration, a-LixSi transforms to crystalline Li15Si4 (c-Li15Si4). The mechanism of this crystallization process is not known. In this paper, we report the fundamental characteristics of the phase transition of a-LixSi to c-Li15Si4 using in-situ scanning transmission electron microscopy (STEM), electron energy loss spectroscopy (EELS), and density function theory (DFT) calculation. We find that when the lithium concentration in a-LixSi reaches a critical value of x = 3.75, the a-Li3.75Si spontaneously and congruently transforms to c-Li15Si4 by a process that is solely controlled by the lithium concentration in the a-LixSi, involving neither large scale atomic migration nor phase separation. DFT calculations indicate that c-Li15Si4 formation is favored over other possible crystalline phases due to the similarity in electronic structure with a-Li3.75Si.

Environmental Molecular Sciences Laboratory↗