Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 127 records · Page 7
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Magnetic ac susceptibility of superconducting Ta films for quantum computing

Recently, breakthroughs were reported in the long coherence time (>0.5 ms) transmon qubit using tantalum films (Ta). Identifying the loss mechanism in Ta films will help further improve the performance of Ta-based superconducting qubits. We report a study of superconducting properties in two sets of Ta films grown on c-cut and a-cut sapphires respectively using contact transport and noncontact magnetic ac susceptibility measurements. Although the resistive transition appears to be similar in both films, we found strikingly different responses in their complex magnetic susceptibilities χ' + iχ'$^{'}$ .χ'$^{'}$ in the c-cut films exhibits a sharp peak at superconducting transition Tc and becomes featureless below Tc indicating a strongly coupled superconducting state. In contrast, χ'$^{'}$ \ in the a-cut films exhibits a broad peak near Tc and a second peak appears below Tc, indicating granular superconductivity behavior. This second peak χ'$^{'}$ in is associated with the hysteresis loss at weak-link-type grain boundaries, which is believed to be a leading source of decoherence in the a-cut Ta films. The derived magnetic loss tangent in the a-cut films is about one order of magnitude higher than in the c-cut films. This study demonstrates that ac susceptibility is an excellent probe for characterizing bulk superconducting properties of the constituent superconducting materials used in qubits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Quantitative Trade-Off in Distributed Secondary Control for Autonomous AC Microgrids

In this paper, we propose to quantify the trade-off between voltage regulation and reactive power sharing in autonomous AC microgrids with distributed secondary control. It is known that voltage regulation and reactive power sharing in droop-controlled autonomous AC microgrids are two conflicting control objectives that present a natural trade-off between voltage regulation towards the voltage magnitude reference and reactive power sharing accuracy. This trade-off is commonly shown qualitatively without sufficient quantification. In this work, to quantify the trade-off between the two objectives, we focus on distributed secondary control and utilize regression and polynomial surface fitting to identify the requisite parameter area to satisfy the predefined error bands for voltage magnitude regulation and reactive power sharing. Extensive case studies are presented to validate the proposed method.

autonomous AC microgrids↗
DOE OSTI2021

A High-Efficiency Isolated PFC AC-DC Topology with Reduced Number of Semiconductor Devices

A new three-level isolated ac-dc power factor correction (PFC) topology with a minimum number of semiconductor devices is the focus of this paper. This topology provides a high input power factor (PF), soft-switching, and higher efficiency than existing isolated ac-dc converters. Furthermore, the proposed circuit has lower voltage rating requirements for the secondary side devices, which leads to a lower total cost and minimizes total converter losses. This article presents a theoretical analysis describing the complete characterization of this new topology, and experimental results on a 1-kW prototype showing high PF and efficiency throughout the operating range.

42 ENGINEERING↗
DOE OSTI2020

Hysteresis Reduction in Tunneling Magnetoresistive Sensor With AC Modulation Magnetic Field

A simple and practical AC modulation method to reduce the hysteresis in tunneling magnetoresistive sensor is demonstrated. It is shown that with a suitable AC modulation magnetic field that is applied along the sensing direction of TMR sensor, the hysteresis in the sensor can be reduced to a negligible level. And depending on the amplitude of the modulation field, the sensitivity and the dynamic range of the TMR sensor can be tuned to meet practical requirements in specific applications. Here, the influence of the modulation on the noise of TMR sensor is also studied.

42 ENGINEERING↗
DOE OSTI2022

A PCB-Embedded 1.2 kV SiC MOSFET Half-Bridge Package for a 22 kW AC–DC Converter

This article presents the design and analysis of a double-side-cooled printed circuit board (PCB) embedded silicon carbide (SiC) MOSFET half-bridge package with low loop inductances and an integrated gate driver. The 1.2 kV SiC MOSFET dies used in the half-bridge package are embedded in the PCB using AT&S's patented technique. The dies are cooled and electrically connected to traces in the PCB through copper-filled microvias. The design methodology accounts for both electrical and thermal performance, limiting the power-loop inductance to 2.3 nH and the maximum package temperature to less than the 175 °C limit. The integration of the gate drive circuitry allows for a high power density and 2.2 nH gate-loop inductances. At 0.12 K/W, the measured junction-to-case thermal resistance with double-sided cooling is 57% lower than that of a TO-247 package. Under similar operating conditions, the PCB-embedded half-bridge package also achieves a 5.6 times lower voltage overshoot and a 0.5% higher peak efficiency than a TO-247-based half-bridge. This article reports the first demonstration of PCB-embedded 1.2 kV SiC MOSFET packages in buck, boost, and ac–dc converters. Furthermore, the prototype three-phase ac–dc converter for an electric vehicle on-board charger is composed of six PCB-embedded half-bridge packages and achieves an efficiency of 98.2% and a power density of 182 W/in 3 .

42 ENGINEERING↗
DOE OSTI2024

Applications of Lifted Nonlinear Cuts to Convex Relaxations of the AC Power Flow Equations

Here, we demonstrate that valid inequalities, or lifted nonlinear cuts (LNC), can be projected to tighten the Second Order Cone (SOC), Convex DistFlow (CDF), and Network Flow (NF) relaxations of the AC Optimal Power Flow (AC-OPF) problem. We conduct experiments on 38 cases from the PGLib-OPF library, showing that the LNC strengthen the SOC and CDF relaxations in 100% of the test cases, with average and maximum differences in the optimality gaps of 6.2% and 17.5% respectively. The NF relaxation is strengthened in 46.2% of test cases, with average and maximum differences in the optimality gaps of 1.3% and 17.3% respectively. We also study the trade-off between relaxation quality and solve time, demonstrating that the strengthened CDF relaxation outperforms the strengthened SOC formulation in terms of runtime and number of iterations needed, while the strengthened NF formulation is the most scalable with the lowest relaxation quality improvement due to these LNC.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Energy and power quality measurement for electrical distribution in AC and DC microgrid buildings

Today's selection of DC microgrid buildings features a diverse set of electrical topologies and turnkey solutions, each with specific design trade-offs and optimizations. Designers desperately need standardized metrics and procedures for measurement and verification (M&V) to analyze and compare the advantages of each DC solution to traditional AC building networks. This work develops M&V procedures for quantifying and comparing the energy efficiency and power quality in buildings. To calculate full-building efficiency, this work introduces the measurement-informed modeling method, a procedure that develops and refines a building's energy model with metered data. To quantify power quality, this work defines a new voltage quality index that applies to both AC and DC buildings. This article describes the equipment, instrumentation, and operation necessary to calculate the efficiency and power quality. It then demonstrates these methods with a set of field tests. We report these M&V procedures can ultimately be used to compare and improve the efficiency and power quality of various DC topologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

The impacts of convex piecewise linear cost formulations on AC optimal power flow

Despite strong connections through shared application areas, research efforts on power market optimization (e.g., unit commitment) and power network optimization (e.g., optimal power flow) remain largely independent. A notable illustration of this is the treatment of power generation cost functions, where nonlinear network optimization has largely used polynomial representations and market optimization has adopted piecewise linear encodings. This work combines state-of-the-art results from both lines of research to understand the best mathematical formulations of the nonlinear AC optimal power flow problem with piecewise linear generation cost functions. An extensive numerical analysis of non-convex models, linear approximations, and convex relaxations across fifty-four realistic test cases illustrates that nonlinear optimization methods are surprisingly sensitive to the mathematical formulation of piecewise linear functions. The results indicate that a poor formulation choice can slow down algorithm performance by a factor of ten, increasing the runtime from seconds to minutes. Furthermore, these results provide valuable insights into the best formulations of nonlinear optimal power flow problems with piecewise linear cost functions, an important step towards building a new generation of energy markets that incorporate the nonlinear AC power flow model.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Ab-initio predictions of phase stability, electronic structure, and optical properties of (0001)-MAX surfaces in M 2 AC (M = Cr, Zr, Hf; A = Al, Ga)

In this work, we report MAX phases' surface properties, which are essential for thin-film technology due to their excellent resistance to high-temperature oxidation, corrosion, and wear. The surface stability, electronic, and optical properties of 0001-surfaces in M 2 AC (M = Zr, Hf, Cr; A = Al, Ga) are investigated and compared with their bulk counterparts. The interplay between chemical bonding and charge distribution is discussed from electronic structure, including the Fermi surfaces. Four possible (0001)-terminated surfaces are considered by breaking M - C and M-A bonds in which cleavage energy of M - C is higher than M-A. The Cr–Al bond in Cr 2 AlC is stronger than other M-A bonds. The charge density of valance A-p electrons redistributes in the surface area, distinct from that of the bulk. The A- and M(C)-terminated (0001)-surfaces are the most stable and energetically favorable terminations due to lower surface energies. The optical properties of the most stable (0001)-surfaces were also investigated to understand the dielectric and photoconductive behavior in the (0001)-terminated surfaces of M 2 AC.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Resistive AC-Coupled Silicon Detectors: principles of operation and first results from a combined analysis of beam test and laser data

This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the n+ implant has been designed to be resistive, and the read-out is obtained via AC-coupling. The truly innovative feature of RSD is that the signal generated by an impinging particle is shared isotropically among multiple read-out pads without the need for floating electrodes or an external magnetic field. Careful tuning of the coupling oxide thickness and the n+ doping profile is at the basis of the successful functioning of this device. Several RSD matrices with different pad width-pitch geometries have been extensively tested with a laser setup in the Laboratory for Innovative Silicon Sensors in Torino, while a smaller set of devices have been tested at the Fermilab Test Beam Facility with a 120 GeV/c proton beam. The measured spatial resolution ranges between 2.5μm for 70–100 pad-pitch geometry and 17μm with 200–500 matrices, a factor of 10 better than what is achievable in binary read-out (bin size/12). Beam test data show a temporal resolution of ~40ps for 200 μm pitch devices, in line with the best performances of LGAD sensors at the same gain.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Improvement of the AC orbit bump method of local kick factor measurement using reference bunches

Here we have improved the AC orbit bump technique of local kick factor measurement. This technique, developed at NSLS-II a few years ago, is based on local sine-wave excitation of the electron beam by four fast correctors adjacent to the impedance location. By implementing reference bunches and the time gate function of beam position monitors, we are now able to measure the AC orbits of bunches with different intensities simultaneously. This improvement allows us to obtain the impedance-driven orbit distortion in a single measurement, significantly improving the measurement accuracy and reducing the measurement time.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evaluation of 134 Ce as a PET imaging surrogate for antibody drug conjugates incorporating 225 Ac

The in vivo generator 134 Ce/ 134 La has the potential to serve as a PET imaging surrogate for both alpha-emitting 225 Ac and 227 Th radionuclides due to the unique Ce III /Ce IV redox couple and the relatively long half-life of 134 Ce. Furthermore, the purpose of this study was to demonstrate the compatibility of 134 Ce with DOTA-based antibody drug conjugates, which would act as therapeutic agents when incorporating 225 Ac.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Condition monitoring of permanent magnet AC machines for all-electric transportation systems: State of the art

The current state of the art on emerging and efficient techniques for condition monitoring of permanent magnet (PM) alternating-current (AC) machines deployed in electric vehicle (EV) applications is presented. The discussion includes the most common and specific types of faults in PM motors, such as rotor demagnetisation and stator inter-turn faults, respectively. Fault indicators, such as voltage (v s ) and current (i s ) signals and machine signatures based on motor back electromotive force (EMF) (E B ) and magnetic flux (φ), are taken into account as a measuring quantity in diagnosing motor faults. Other signatures, including thermal analysis, acoustic noise, and vibrations, are also illustrated as some of the emerging techniques in estimating the performance of EV motors while under operations. In addition, various fault modelling methods, condition monitoring techniques, and comprehensive approaches applied in diagnosing the effect of machine faults during its incipient stages are illustrated. Since most of the fault diagnostic techniques discussed here include only machine-based quantities as fault indices/indicators, the provided solutions are therefore found to be more reliable and accurate for diagnosing the motor faults. This comprehensive review study is inclusive of the existing fault diagnostic techniques, which are currently employed in industrial and commercial practices, in addition to the new methodologies proposed by the authors. All the given condition monitoring schemes therefore seem significantly vital in estimating the state of health of PM AC machines while under operation in all-electric transportation systems.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

A new approach to the design of surface subsystems of polymeric insulators for HV and MV apparatus under AC voltage

The design of high voltage and medium voltage AC and DC standoff insulators, and, in general, of insulation systems where surface and interface properties are predominant factors, is based on specifications and standards that rely upon long-term experiences and lab testing. Surface insulating properties depend on electrical and thermal stresses, besides environmental factors, and the inception of extrinsic ageing phenomena, such as partial discharges, can be already a cause of reduced reliability and premature failure (for organic insulating materials). An innovative approach, based on field simulation, discharge modelling, and partial discharge inception measurements is presented by the authors, which can establish a solid basis to optimise insulation design for any type of supply voltage waveform. This method, the three-leg approach, is applied here to a cable system under AC sinusoidal voltage, but it can work for any type of insulation system, such as bushings, switch gears, transformers, rotating machines, and power electronics boards.

42 ENGINEERING↗
DOE OSTI2020

Spin dynamics and relaxation in 7.6 nm thin film of La 0.7 Sr 0.3 MnO 3 /SrTiO 3 : ac magnetic susceptibility and magnetic viscosity investigations

Analysis of the results from our investigations of the temperature dependence of ac susceptibilities (χ' and χ'') and magnetic viscosity in a 7.6 nm thin film of La 0.7 Sr 0.3 MnO 3 grown on SrTiO 3 (001) substrate is presented. The Curie temperature (T C ) of this film is magnetic field (H) dependent, varying as [T C (H) - T C (0)] ~ H n with T C (0) = 270 K and n = 0.15. Temperature dependence of χ' and χ'' measured at ac frequencies f m in the range of 0.1–10 kHz shows a broad peak near 230 K associated with the blocking temperature (T B ) of spin clusters present in the 1.4 nm surface layer and a frequency dependent peak near 270 K associated with T C . The mean relaxation time τ determined from the Cole–Cole analysis of the temperature dependent χ' and χ'' is shown to fit the Vogel–Fulcher law: τ = τ 0 exp[ΔE/k B (T - T 0 )] with T 0 = 245 K, ΔE/k B = 270 K = T C and τ 0 = 1.2 x 10 -9 s. Magnetic viscosity S (measured in H = 0 for a sample cooled in H = 50 Oe) determined from the fit to the magnetization: M (t)= M (0) – S ln t, with time t up to 2 h, shows a peak at 230 K above which M (2 h) switches to negative values for temperatures up to T C (0). It is argued that this negative magnetization results from an interaction between the superparamagnetic spin clusters and the ferromagnetic phase, both being present in the temperature range of T B < T < T C .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Frequency-dependent sensitivity of AC elastocaloric effect measurements explored through analytical and numerical models

We present a comprehensive study of the frequency-dependent sensitivity for measurements of the AC elastocaloric effect by applying both exactly soluble models and numerical methods to the oscillating heat flow problem. These models reproduce the finer details of the thermal transfer functions observed in experiments, considering here representative data for single-crystal Ba(Fe1−xCox)2As2. Based on our results, we propose a set of practical guidelines for experimentalists using this technique. This work establishes a baseline against which the frequency response of the AC elastocaloric technique can be compared and provides intuitive explanations of the detailed structure observed in experiments.

Straquadine, J. A. W. (ORCID:0000000165309541)↗
DOE OSTI2025

AC electrical transport detection of magnetic properties of small, granular, and heterogeneous samples

Experimental constraints and sample limitations can preclude ideal measurements of electrical transport properties of materials. In such situations, AC electrical transport methods are often employed due to a significant increase in signal-to-noise ratio they can provide. However, dynamic effects that are not often accounted for may be present that may modify the signals in these measurements. In particular, dynamic filtering effects are prominent in small, granular, and heterogeneous materials. We demonstrate that a lock-in amplifier based circuit can distinguish between these DC transport and AC filtering effects. Here, we further demonstrate that this filtering can reveal distinct signatures of magnetic transitions while providing a measure of sample quality.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Electron kinetics in a positive column of AC discharges in a dynamic regime

Abstract We have performed hybrid kinetic-fluid simulations of a positive column in alternating current (AC) argon discharges over a range of driving frequencies f and gas pressure p for the conditions when the spatial nonlocality of the electron energy distribution function (EEDF) is substantial. Our simulations confirmed that the most efficient conditions of plasma maintenance are observed in the dynamic regime when time modulations of mean electron energy (temperature) are substantial. The minimal values of the root mean square electric field and the electron temperature have been observed at f/p values of about 3 kHz Torr −1 in a tube of radius R = 1 cm. The ionization rate and plasma density reached maximal values under these conditions. The numerical solution of a kinetic equation allowed accounting for the kinetic effects associated with spatial and temporal nonlocality of the EEDF. Using the kinetic energy of electrons as an independent variable, we solved an anisotropic tensor diffusion equation in phase space. We clarified the role of different flux components during electron diffusion in phase space over surfaces of constant total energy. We have shown that the kinetic theory uncovers a more exciting and rich physics than the classical ambipolar diffusion (Schottky) model. Non-monotonic radial distributions of excitation rates, metastable densities, and plasma density have been observed in our simulations at pR > 6 Torr cm. The predicted off-axis plasma density peak in the dynamic regime has never been observed in experiments so far. We hope our results stimulate further experimental studies of the AC positive column. The kinetic analysis could help uncover new physics even for such a well-known plasma object as a positive column in noble gases.

Physics↗