Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “test approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Digital data processing system dynamic loading analysis

Simulation and analysis of the Space Shuttle Orbiter Digital Data Processing System (DDPS) are reported. The mated flight and postseparation flight phases of the space shuttle's approach and landing test configuration were modeled utilizing the Information Management System Interpretative Model (IMSIM) in a computerized simulation modeling of the ALT hardware, software, and workload. System requirements simulated for the ALT configuration were defined. Sensitivity analyses determined areas of potential data flow problems in DDPS operation. Based on the defined system requirements and the sensitivity analyses, a test design is described for adapting, parameterizing, and executing the IMSIM. Varying load and stress conditions for the model execution are given. The analyses of the computer simulation runs were documented as results, conclusions, and recommendations for DDPS improvements.

Lagas, J. J.↗
NASA NTRS1976

Design document for shuttle task 501. Shuttle carrier aircraft transceiver console (SED 36115353-301)

The flight data for the space shuttle orbiter (SSO) is transmitted via S band to a transceiver in the shuttle carrier aircraft (SCA) for relay to the ground during the mated portion of the approach and landing test (ALT). The transceiver is mounted in the SCA transceiver console for shuttle task 501 testing. This document defines the requirements for the SCA transceiver console, the design description, test plan for the console prior to installating the spacecraft equipment in the console, and the test plan for acceptance tests.

Doland, G. D.↗
NASA NTRS1975

An RF link analysis of MSBLS during ALT

An analysis of the microwave scanning beam landing system (MSBLS) ground station to orbiter radio frequency (RF) link was made to determine if the expected signal levels will be compatible with orbiter receiver capabilities. Of primary interest was whether or not loss of data will occur due to interference caused by the orbiter 101 nose boom which provides additional air data during the approach and landing test. The results of the analysis indicate that a small amount of data loss may occur due to the proximity of the MSBLS antennas and the nose boom. Tabulated data of antenna radiation patterns are given.

Speir, R. E.↗
NASA NTRS1976

Breadboard linear array scan imager using LSI solid-state technology

The performance of large scale integration photodiode arrays in a linear array scan (pushbroom) breadboard was evaluated for application to multispectral remote sensing of the earth's resources. The technical approach, implementation, and test results of the program are described. Several self scanned linear array visible photodetector focal plane arrays were fabricated and evaluated in an optical bench configuration. A 1728-detector array operating in four bands (0.5 - 1.1 micrometer) was evaluated for noise, spectral response, dynamic range, crosstalk, MTF, noise equivalent irradiance, linearity, and image quality. Other results include image artifact data, temporal characteristics, radiometric accuracy, calibration experience, chip alignment, and array fabrication experience. Special studies and experimentation were included in long array fabrication and real-time image processing for low-cost ground stations, including the use of computer image processing. High quality images were produced and all objectives of the program were attained.

Tracy, R. A.↗
NASA NTRS1977

Data processing system and interfacing elements time base analysis

The processing of time in the Orbiter System Services software and the associated facilities provided to the user community are described. The descriptions are directed toward showing the functional intent of the design rather than the actual implementation. Simplified flow diagrams are included. Based upon detailed analysis of a preliminary review copy of the Approach and Landing Test (ALT) System Software Detailed Design Specification and the Program Listings for Version 17 Prime, the processing of time has the potential for error free operations. The processing of time is not expected to change between ALT and the Operational Flight Test (OFT) other than differences in value of some constants for control and limit checking. Due to the dynamic nature of onboard time processing and its criticality to the successful operation of the orbiter, it is recommended that a comprehensive list of external variables, their locations, initial values, and a 'where used' listing be produced, as a by-product of the link edit process, for all non-HAL coding. In addition, a careful review of the verification test procedures for the System Services time-related software is recommended.

Blackburn, J. D.↗
NASA NTRS1977

Program Documentation for Elapsed Time to Oxygen and Hydrogen Caution and Warning System for Captive/active 1 and 3 Flights

High pressure gas storage simulation runs were made to compute the elapsed time from T-O disconnect (transfer to onboard reactant) to the caution and warning pressures for the primary oxygen (O2) and hydrogen (H2) systems of Orbiter Vehicle (OV) 101. The simulation runs were made for approach and landing test flights Captive/Active 1 and Captive/Active 3.

Hurst, J. E.↗
NASA NTRS1977

High pressure gas storage system consumable analyses for ALT flights free flight 1 and free flight 6

Consumables analyses are presented for the high pressure gas storage oxygen (O2), and hydrogen (H2) reactant systems for orbiter vehicle 101 approach and landing tests, for two flights, free flight 1 and free flight 6 are given. The consumables analyses are based on average power data. The required system and mission data updates were made in order to perform the analyses, notably the thermal environment profiles of the reactant storage cylinders and the power profile for the Electrical power subsystem. No mission-dependent environment profiles were provided; therefore, nominal free flight mission profile was used to generate environment profiles for free flights 1 and 6.

Hurst, J. E.↗
NASA NTRS1977

ECLSS consumables analysis: ALT captive/active 1 and captive/active 3

A consumables analysis of the environmental control and life support system (ECLSS) was performed for approach and landing test (ALT) captive/active missions 1 through 3 and is also applicable to missions 4 and 5. The ECLSS configuration analyzed and the guidelines and assumptions used in performing the analysis are presented. A projection of ammonia temperatures and pressures during the captive/active 1 mission is also included. The resulting consumables, budgets are presented in tabular and graphic form. Adequate margins were obtained for all systems.

Steines, G. J.↗
NASA NTRS1977

Space Shuttle Orbiter approach and landing program status

The space shuttle approach and landing test (ALT) program is being conducted in four phases. The first phase, completed in March of 1977, consisted of verifying the airworthiness of the mated B-747 shuttle carrier aircraft and orbiter. The second phase consists of checking the orbiter systems in captive flight. The third phase is to be confined to launching the orbiter with and without the tail cone installed to evaluate the final landing phase of the shuttle operations through the verification of the automatic landing system. The fourth and final phase of the program is to document the mated configuration's performance relative to the ferry operations to be conducted between the return from the orbiter's landing sites and launch sites. This paper presents the results of the SCA inert orbiter flight testing and the program plans up to the completion of the ALT program.

Andrews, W. H.↗
NASA NTRS1976

Evaluating the GPSS simulation model for the Viking batch computer system

In anticipation of extremely heavy loading requirements by the Viking mission during the post-landing periods, a GPSS model has been developed for the purpose of simulating these requirements on the Viking batch computer system. This paper presents the effort pursued in evaluating such a model and results thereby obtained. The evaluation effort consists of selecting the evaluation approach, collecting actual test run data, making comparisons and deriving conclusions.

Lee, J.-J.↗
NASA NTRS1977

Summary of emissions reduction technology programs

The NASA emissions reduction contract programs for EPA aircraft engine classes P2 (turboshaft engines), T1 (jet engines with thrust under 8000 lb), T4 (JT8D) engines), and T2 (jet engines with thrust over 8000 lb) are discussed. The most important aspects of these programs, the commonality of approaches used, the test results, and assessments regarding applications of the derived technology are summarized.

Niedzwiecki, R. W.↗
NASA NTRS1977

Independent Evaluation of Shuttle Flight Control System

A brief summary of the work performed on the Approach and Landing Test (ALT) shuttle flight control system is presented. (FCS) and a bibliography of the formal reports are included which document the activities in detail. In general, the activities were grouped in four categories: (1) independent evaluation of ALT FCS software design; (2) independent evaluation of Software Development Laboratory (SDL) testing of ALT FCS software; (3) independent evaluation of Shuttle Avionics Integration Laboratory (SAIL) ALT FCS testing; and (4) independent evaluation of ALT flight test results.

Lee, R.↗
NASA NTRS1978

On the use of relative velocity exponents for jet engine exhaust noise

The effect of flight on jet engine exhaust noise has often been presented in terms of a relative velocity exponent, n, as a function of radiation angle. The value of n is given by the OASPL reduction due to relative velocity divided by 10 times the logarithm of the ratio of relative jet velocity to absolute jet velocity. In such terms, classical subsonic jet noise theory would result in a value of n being approximately 7 at 90 degree angle to the jet axis with n decreasing, but remaining positive, as the inlet axis is approached and increasing as the jet axis is approached. However, flight tests have shown a wide range of results, including negative values of n in some cases. In this paper it is shown that the exponent n is positive for pure subsonic jet mixing noise and varies, in a systematic manner, as a function of flight conditions and jet velocity.

Stone, J. R.↗
NASA NTRS1978

ALT space shuttle barometric altimeter altitude analysis

The accuracy was analyzed of the barometric altimeters onboard the space shuttle orbiter. Altitude estimates from the air data systems including the operational instrumentation and the developmental flight instrumentation were obtained for each of the approach and landing test flights. By comparing the barometric altitude estimates to altitudes derived from radar tracking data filtered through a Kalman filter and fully corrected for atmospheric refraction, the errors in the barometric altitudes were shown to be 4 to 5 percent of the Kalman altitudes. By comparing the altitude determined from the true atmosphere derived from weather balloon data to the altitude determined from the U.S. Standard Atmosphere of 1962, it was determined that the assumption of the Standard Atmosphere equations contributes roughly 75 percent of the total error in the baro estimates. After correcting the barometric altitude estimates using an average summer model atmosphere computed for the average latitude of the space shuttle landing sites, the residual error in the altitude estimates was reduced to less than 373 feet. This corresponds to an error of less than 1.5 percent for altitudes above 4000 feet for all flights.

Killen, R.↗
NASA NTRS1978

Space shuttle separation mechanisms

The development of space shuttle separation devices is reviewed to illustrate the mechanisms involved in separating the Orbiter from the Boeing 747 carrier aircraft and from the externally mounted propellant tank. Other aspects of the separation device development discussed include design evolution, operational experience during the orbiter approach and landing tests, and the work required to produce an operational system.

Rogers, W. F.↗
NASA NTRS1977

Space Shuttle Orbiter approach and landing program status

The approach and landing test (ALT) phase of the Space Shuttle program aims at assessing the Orbiter's subsonic aerodynamic flight and landing characteristics along with the support equipment, ground facilities, and the approximate hardware and software to be used in the terminal phase of orbital missions. The program also evaluates the performance of the Shuttle carrier aircraft (SCA) as related to the transport of the Orbiter to the launch sites during the stages of Space Shuttle operations. Results are presented for the SCA inert Orbiter flight testing and the program plans up to the completion of the ALT program. Emphasis is placed on testing the airworthiness of the mated B-747 Shuttle carrier aircraft and Orbiter, checkout of the Orbiter systems in captive flight, and launching the Orbiter with and without the tail cone installed. Major program milestones before the first manned orbital flight are summarized in graphic form.

Andrews, W. H.↗
NASA NTRS1978

Purification and cultivation of human pituitary growth hormone secreting cells

The maintainance of actively secreting human pituitary growth hormone cells (somatotrophs) in vitro was studied. The primary approach was the testing of agents which may be expected to increase the release of the human growth hormone (hGH). A procedure for tissue procurement is described along with the methodologies used to dissociate human pituitary tissue (obtained either at autopsy or surgery) into single cell suspensions. The validity of the Biogel cell column perfusion system for studying the dynamics of GH release was developed and documented using a rat pituitary cell system.

Hymer, W. C.↗
NASA NTRS1979

Space Shuttle separation mechanisms

The development of space shuttle separation devices is reviewed to illustrate the mechanisms involved in separating the orbiter from the Boeing 747 carrier aircraft and from the externally mounted propellant tank. Other aspects of the separation device development discussed include design evolution, operational experience during the orbiter approach and landing tests, and the work to be accomplished before an operational system becomes a reality.

Rogers, W. F.↗