Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface roughness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of Moisture and Feedstock Variability on the Rheological Behavior of Corn Stover Particles

Continuous feeding, processing, and handling of biomass powders is pivotal to the economic viability of integrated biorefineries. However, current challenges associated with the operational reliability of bulk solids handling and transport greatly impact the process economics and ultimately the widespread commercialization of integrated biorefineries. In this work, we examine the effect of moisture and feedstock variability on the flow behavior of corn stover biomass particles. The total flow energy, compressibility, shear properties, and wall friction angles were measured for corn stover samples A and B containing 0%, 15%, 25%, 50%, and 75% (mass fraction) moisture contents using a FT4 powder rheometer. In general, the flowability of both A and B was reduced when moisture was present as indicated by the stability and variable flow rate, compressibility, and shear tests. The 15% moisture sample had the highest flow energy, revealing the interplay between the increased surface tension and looser packing both of which were caused by liquid bridging. The 75% moisture sample had the highest compressibility and the lowest flowability factor (ff c ). The trend in wall friction angle was found to be dependent upon the surface hydrophobicity of the wall material. The wall friction angle on the hydrophilic, stainless-steel surface increased with moisture and therefore poses additional handling challenges. On the other hand, the wall friction angle on the hydrophobic polymer surfaces were the lowest for samples with intermediate moisture contents. Sample B had greater bulk density, smaller compressibility, and greater flowability than the sample A , as suggested by the compressibility and shear tests. The wall friction angle of sample B was higher than or equal to that of sample A depending on both the type and the surface roughness of the wall material.

09 BIOMASS FUELS↗
NASA NTRS1980

Remote sensing data of SP mountain and SP lava flow in north-central Arizona

Multifrequency airborne radar image data of SP Mountain and SP flow in north-central Arizona were obtained in diverse viewing directions and direct and cross-polarization and compared with surface and aerial photography, Landsat multispectral scanner data, airborne thermal infrared imagery, surface geology, and surface roughness statistics. The extremely blocky, basaltic andesite of SP flow is brighter on direct-polarization K-band images than on cross-polarized images taken simultaneously. This effect is explained by multiple scattering and the strong wavelength dependence of polarization effects caused by the rectilinear basaltic andesite scatters. Two distinct types of surface relief on SP flow, one extremely blocky, the other subdued, are clearly discriminated on the visible and thermal wavelength images but are separable only on the longer wavelength L-band radar image data.

Schaber, G. G.↗
NASA NTRS1994

Goldstone radar contributions to Mars Pathfinder landing safety

Goldstar radar can provide topography 'profiles', statistical surface roughness, and radar images within a few degrees of the sub-Earth point. Goldstone/Very Large Array (VLA) bistatic radar observations can image the whole disk of Mars with integration times on the order of ten min before pixel smearing occurs. Data from all these radar techniques can be useful for observing the local surface conditions relating to landing safety issues for Mars Pathfinder.

Slade, Martin A.↗
NASA NTRS1977

Sea-surface temperature and salinity mapping from remote microwave radiometric measurements of brightness temperature

A technique to measure remotely sea surface temperature and salinity was demonstrated with a dual frequency microwave radiometer system. Accuracies in temperature of 1 C and in salinity of part thousand for salinity greater than 5 parts per thousand were attained after correcting for the influence of extraterrestrial background radiation, atmospheric radiation and attenuation, sea-surface roughness, and antenna beamwidth. The radiometers, operating at 1.43 and 2.65 GHz, comprise a third-generation system using null balancing and feedback noise injection. Flight measurements from an aircraft at an altitude of 1.4 km over the lower Chesapeake Bay and coastal areas of the Atlantic Ocean resulted in contour maps of sea-surface temperature and salinity with a spatial resolution of 0.5 km.

Hans-Juergen, C. B.↗
NASA NTRS1992

Microwave scattering and emission properties of large impact craters on the surface of Venus

Many of the impact craters on Venus imaged by the Magellan synthetic aperture radar (SAR) have interior floors with oblique incidence angle backscatter cross sections 2 to 16 times (3 dB to 12 dB) greater than the average scattering properties of the planet's surface. Such high backscatter cross sections are indicative of a high degree of wavelength-scale surface roughness and/or a high intrinsic reflectivity of the material forming the crater floors. Fifty-three of these (radar) bright floored craters are associated with 93 percent of the parabolic-shaped radar-dark features found in the Magellan SAR and emissivity data, features that are thought to be among the youngest on the surface of Venus. It was suggested by Campbell et al. that either the bright floors of the parabolic feature parent craters are indicative of a young impact and the floor properties are modified with time to a lower backscatter cross section or that they result from some property of the surface or subsurface material at the point of impact or from the properties of the impacting object. As a continuation of earlier work we have examined all craters with diameters greater than 30 km (except 6 that were outside the available data) so both the backscatter cross section and emissivity of the crater floors could be estimated from the Magellan data.

Stacy, N. J. S.↗
NASA NTRS1980

The evaluation of 3cm-wavelength radar for mapping surface deposits in the Bristol Lake/Granite Mountain area, Mojave Desert, California

Surface deposits in the Bristol Lake/Granite Mountains area, Mojave Desert, California were mapped using high resolution 3 cm wavelength radar images. The surface deposits range from silt to boulders in size and were separated into six radar-rock units on the basis of radar return signatures (brightness and texture) and geomorphic expression. Field reconnaissance of the six units showed that the brightness of the radar signatures on the images correlates with the surface roughness of each unit. Two major radar signatures anomalies were noted during the study. A dark radar signature for the large sand ridges in the Kelso Dunes area and a distinct northwest trending contrast boundary between bright and dark radar signatures in the Bristol Dry Lake area. Field reconnaissance of the two areas indicated that near surface moisture may be the cause of dark signatures. Dune areas with little to no vegetation produce a dark signature, whereas areas with sparse to moderate vegetation produce an intermediate to dark signature.

Sugiura, R.↗
NASA NTRS1982

A high-resolution model of the planetary boundary layer - Sensitivity tests and comparisons with SESAME-79 data

A one-dimensional, planetary boundary layer (PBL) model is presented and verified using April 10, 1979 SESAME data. The model contains two modules to account for two different regimes of turbulent mixing. Separate parameterizations are made for stable and unstable conditions, with a predictive slab model for surface temperature. Atmospheric variables in the surface layer are calculated with a prognostic model, with moisture included in the coupled surface/PBL modeling. Sensitivity tests are performed for factors such as moisture availability, albedo, surface roughness, and thermal capacity, and a 24 hr simulation is summarized for day and night conditions. The comparison with the SESAME data comprises three hour intervals, using a time-dependent geostrophic wind. Close correlations were found with daytime conditions, but not in nighttime thermal structure, while the turbulence was faithfully predicted. Both geostrophic flow and surface characteristics were shown to have significant effects on the model predictions

Zhang, D.↗
NASA NTRS1939

The Effects of Some Surface Irregularities on Wing Drag

The N.A.C.A. has conducted tests to provide more complete data than were previously available for estimating the effects of common surface irregularities on wing drag. The irregularities investigated included: brazier-head and countersunk rivets, spot welds, several types of sheet-metal joints, and surface roughness. Tests were also conducted to determine the over-all effect of manufacturing irregularities incidental to riveted aluminum alloy and to spot-welded stainless-steel construction. The tests were made in the 8-foot high speed wind tunnel at Reynolds Numbers up to 18,000,000. The results show that any of the surface irregularities investigated may increase wing drag enough to have important adverse effects on high-speed performance and economy. A method of estimating increases in wing drag caused by brazier-head rivets and lapped joints under conditions outside the range of the tests is suggested. Estimated drag increases due to rivets and lapped joints under conditions outside the range of the tests is suggested. Estimated drag increases due to rivets and lapped joints on a wing of 20-foot chord flying at 250 miles per hour are shown.

Drag, Manley↗
NASA NTRS1996

Applications of an Energy Transfer Model to Three Problems in Planetary Regoliths: The Solid-State Greenhouse, Thermal Beaming, and Emittance Spectra

Several problems of interest in planetary infrared remote sensing are investigated using a new radiative-conductive model of energy transfer in regoliths: the solid-state greenhouse effect, thermal beaming, and reststrahlen spectra. The results of the analysis are as follows: (1) The solid-state greenhouse effect is self-limiting to a rise of a few tens of degrees in bodies of the outer solar system. (2) Non-Lambertian directional emissivity can account for only about 20% of the observed thermal beaming factor. The remainder must have another cause, presumably surface roughness effects. (3) The maximum in a reststrahlen emissivity spectrum does not occur exactly at the Christiansen wavelength where, by definition, the real part of the refractive index equals one, but rather at the first transition minimum in reflectance associated with the transition from particle scattering being dominated by volume scattering to that dominated by strong surface scattering. The transparency feature is at the second transition minimum and does not require the presence of a second band at longer wavelength for its occurance. Subsurface temperature gradients have only a small effect on emissivity bands.

Hapke, Bruce↗
DOE OSTI2023

Atomic-scale identification of defects in alite

Crystallographic defects play a crucial role in cement hydration, with initial dissolution being dominated by the formation of etch pits that rely on the intersection of defects on surfaces. However, the defects present in cement particles have remained a mystery due to the lack of detailed direct observation at the atomic scale. In this study, we used scanning transmission electron microscopy to unravel the defects in alite particles at the single-atom level. Our observations identified different types of defects, including vacancies, doping, dislocations, rough surfaces, and grain boundaries. Atomic ordering in the alite crystal was further examined based on our single-atom recognition method. Our findings indicate that defects in cement particles may serve as reactive sites during the early hydration stage, facilitating the initial dissolution and providing nucleation sites for hydration products. Finally, this work provides insights into cement defect formation at the single-atom level and offers new opportunities in tuning the hydration process through defect engineering of cement particles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hydrated doped-BaZrO 3 proton conductors studied by positron annihilation lifetime spectroscopy

The study of defect chemistry for doped BaZrO 3 proton conductors is of particular interest because of defect interactions that can affect the proton conductivity of the material. Protons incorporated due to the material's hydration can be trapped by negatively charged immobile dopants, reducing proton mobility. The reduction of the proton conduction impedes using BaZrO 3 materials in energy conversion applications at intermediate temperatures (300°C – 600°C). The probing of proton trapping in doped BaZrO 3 is hindered by the limited availability of techniques sensitive to defect chemistries. In this work, we used positron annihilation lifetime spectroscopy (PALS) to study the defect chemistry of Y-doped and Sc-doped BaZrO 3 . Using a two-state positron trapping model we showed that PALS can be used to study the defect chemistry of hydrated dense proton conductors. Positron trapping rates and lifetimes were correlated with doping levels of the materials. Probability significance t-tests were carried out for PALS parameters to verify whether there are differences/similarities for various populations: non-doped/doped, level and type of doping, high temperature, and surface effects. Further, the results revealed that the initial doping generates a significant number of traps available for positrons. Doping in yttrium increased the positron trapping rate, while this effect was not observed with scandium. Low-temperature hydration affects specimens significantly inhibiting positron trapping at undoped BaZrO 3 material and highly doped specimens. Positronium formation in rough surface layers, and highly doped specimens was detected but does not exceed 1%.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Studies on the Fundamental Mechanisms of Niobium Electropolishing

To improve the superconducting performance of niobium SRF cavities, electropolishing (EP) with a sulfuric and hydroflouric acid mixture is used. The chemistry of this reaction is complex due to the interactions between diffusion mechanisms, surface oxide structure, and multiple chemical species. Past studies on the EP process have produced a certain set of optimum parameters that have been used successfully for a long time. However, two recent developments have called the efficacy of the existing EP process into question. Since the introduction of nitrogen doping the surface quality of some cavities has been very poor. Also, EP performed at colder than standard temperatures leads to an increase in the cavity performance. To understand these questions, we perform a multivariate study on the EP process using niobium test samples electropolished at different temperatures and potentials. We find that electropolishing at lower potentials leads to rough surface features such as pitting and grain etching. Some of the surface features show similarities to features seen in niobium cavities. The effect of electropolishing temperature is not clear based on the results of this study.

43 PARTICLE ACCELERATORS↗
NASA NTRS1976

Spectral characteristics of the microwave emission from a wind-driven foam-covered sea

Aircraft observations of the microwave emission from the wind-driven foam-covered Bering Sea substantiate earlier results and show that the combination of surface roughness and white water yields a significant microwave brightness temperature dependence on wind speed over a wide range of microwave wavelengths, with a decreasing dependence for wavelengths above 6 cm. The spectral characteristic of brightness temperature as a function of wind speed is consistent with a foam model in which the bubbles give rise to a cusped surface between the foam and the sea. In the fetch-limited situation the contribution of the wave structure at the surface appears to increase as the foam coverage decreases. Although the data show that the thin streaks are the most important part of the white water signature, there is some evidence for the contribution of whitecaps.

Webster, W. J., Jr.↗
NASA NTRS1988

Effects of oxidation and roughness on Cu contact resistance from 4 to 290 K

Knowledge of the factors influencing contact resistance is important for optimizing system design in cryogenic applications. In space cryogenics, indirect cooling of infrared components is the primary concern. The presence of bolted joints results in contact resistances which can dominate all other contributions to the overall heat transfer rate. Here, thermal and electrical contact resistances measured between 4 K and 290 K for a series of bolted OFHC Cu contacts are reported. Surface roughness is found to have little effect on the overall contact resistance within the experimental limits, while oxidation can increase the contact resistance by as much as a factor of 100. Thermal and electrical contact resistances measured on the same contact show that the contact resistance temperature dependence does not follow the bulk dependence. For example, the residual resistance ratio (RRR) of the OFHC Cu is 110, but for contacts made from this material, the RRR is about two.

Nilles, M. J.↗
NASA NTRS2003

Mars Exploration Rovers as Virtual Instruments for Determination of Terrain Roughness and Physical Properties

The two 2003 Mars Exploration Rovers (MERs), in combination with the Athena Payload, will be used as virtual instrument systems to infer terrain properties during traverses, in addition to using the rover wheels to excavate trenches, exposing subsurface materials for remote and in-situ observations. The MERs are being modeled using finite element-based rover system transfer functions that utilize the distribution of masses associated with the vehicle, together with suspension and wheel dynamics, to infer surface roughness and mechanical properties from traverse time series data containing vehicle yaw, pitch, roll, encoder counts, and motor currents. These analyses will be supplemented with imaging and other Athena Payload measurements. The approach is being validated using Sojourner data, the FIDO rover, and experiments with MER testbed vehicles. In addition to conducting traverse science and associated analyses, trenches will be excavated by the MERs to depths of approximately 10-20 cm by locking all but one of the front wheels and rotating that wheel backwards so that the excavated material is piled up on the side of the trench away from the vehicle. Soil cohesion and angle of internal friction will be determined from the trench telemetry data. Emission spectroscopy and in-situ observations will be made using the Athena payload before and after imaging. Trenching and observational protocols have been developed using Sojourner results; data from the FIDO rover, including trenches dug into sand, mud cracks, and weakly indurated bedrock; and experiments with MER testbed rovers. Particular attention will be focused on Mini-TES measurements designed to determine the abundance and state of subsurface water (e.g. hydrated, in zeolites, residual pore ice?) predicted to be present from Odyssey GRS/NS/HEND data.

R E Arvidson↗
NASA NTRS1982

Radiative transfer in the surfaces of atmosphereless bodies. III - Interpretation of lunar photometry

Narrowband and UBV photoelectric phase curves of the entire lunar disk and surface photometry of some craters have been interpreted using a newly developed generalized radiative transfer theory for planetary regoliths. The data are well fitted by the theory, yielding information on both macroscopic and microscopic lunar properties. Derived values for the integrated disk geometric albedo are considerably higher than quoted previously, because of the present inclusion of an accurately determined opposition effect. The mean surface roughness, defined as the ratio of the height to the radius of a typical irregularity, is found to be 0.9 + or - 0.1, or somewhat less than the mean value of 1.2 obtained for the asteroids. From the phase curves, wavelength-dependent values of the single scattering albedo and the Henyey-Greenstein asymmetry factor for the average surface particle are derived.

Lumme, K.↗
NASA NTRS2005

An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear

The influence of lubricant viscosity and additives on the average wear rate of spur gear pairs was investigated experimentally. The gear specimens of a comprehensive gear durability test program that made use of seven lubricants covering a range of viscosities were examined to measure gear tooth wear. The measured wear was related to the as-manufactured surface roughness, the elastohydrodynamic film thickness, and the experimentally determined contact fatigue lives of the same specimens. In general, the wear rate was found to be inversely proportional to the viscosity of the lubricant and to the lambda ratio (also sometimes called the specific film thickness). The data also show an exponential trend between the average wear rates and the surface fatigue lives. Lubricants with similar viscosities but differing additives and compositions had somewhat differing gear surface fatigue lives and wear rates.

Krantz, Timothy L.↗
NASA NTRS1973

A systematic experimental investigation of significant parameters affecting model tire hydroplaning

The results of a comprehensive parametric study of model and small pneumatic tires operating on a wet surface are presented. Hydroplaning inception (spin down) and rolling restoration (spin up) are discussed. Conclusions indicate that hydroplaning inception occurs at a speed significantly higher than the rolling restoration speed. Hydroplaning speed increases considerably with tread depth, surface roughness and tire inflation pressure of footprint pressure, and only moderately with increased load. Water film thickness affects spin down speed only slightly. Spin down speed varies inversely as approximately the one-sixth power of film thickness. Empirical equations relating tire inflation pressure, normal load, tire diameter and water film thickness have been generated for various tire tread and surface configurations.

Wray, G. A.↗