Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “subsurface flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Breakthroughs in Seismic and Borehole Characterization of Basalt Sequestration Targets

Mafic continental flood basalts form a globally important, but under-characterized CO2 sequestration target. The Columbia River Basalt Group (CRBG) in the northwestern U.S. is up to 5 km thick and covers over 168,000 km2. In India, flood basalts are 3 km thick and cover greater than 500,000 km2. Laboratory experiments demonstrate that the CRBG and other basalts react with formation water and super critical (sc) CO2 to precipitate carbonates, thus adding a potential mineral trapping mechanism to the standard trapping mechanisms of most other types of CO2 sequestration reservoirs. Brecciated tops of individual basalt flows in the CRBG form regional aquifers that locally have greater than 30% porosity and three Darcies of permeability. Porous flow tops are potential sites for sequestration of gigatons of scCO2 in areas where the basalts contain unpotable water and are at depths greater than 800 m. In this paper we report on the U.S. DOE Big Sky Regional Carbon Sequestration Partnership surface seismic and borehole geophysical characterization that supports a field test of capacity, integrity, and geochemical reactivity of CRBG reservoirs in eastern Washington, U.S.A. Traditional surface seismic methods have had little success in imaging basalt features in on-shore areas where the basalt is thinly covered by sediment. Processing of the experimental 6.5 km, 5 line 3C seismic swath included constructing an elastic wavefield model, identifying and separating seismic wave modes, and processing the swath as a single 2D line. Important findings include: (1) a wide variety of shear wave energy modes swamp the P-wave seismic records; (2) except at very short geophone offsets, ground roll overprints P-wave signal; and (3) because of extreme velocity contrasts, P-wave events are refracted at incidence angles greater than 7-15 degrees. Subsequent removal of S-wave and other noise during processing resulted in tremendous improvement in image quality. The application of wireline logging to onshore basalts is underexploited. Full waveform sonic logs and resistivity-based image logs acquired in the 1250 m basalt pilot borehole provide powerful tools for evaluating geomechanics and lithofacies. The azimuth of the fast shear wave is parallel to SH and records the changes through time in basalt flow and tectonic stress tensors. Combined with image log data, azimuthal S-wave data provide a borehole technique for assessing basalt emplacement and cooling history that is related to the development of reservoirs and seals, as well as the orientation of tectonic stresses and fracture systems that could affect CO2 transport or containment. Reservoir and seal properties are controlled by basalt lithofacies, and rescaled P- and S- wave slowness curves, integrated with image logs, provide a tool for improved recognition of subsurface lithofacies.

54 ENVIRONMENTAL SCIENCES↗

A Geostatistical Study in Support of CO 2 Storage in Deep Saline Aquifers of the Shenhua CCS Project, Ordos Basin, China

The Shenhua Carbon Capture and Storage (CCS) project at the Shenbei Slope injection site in North Yulin is the first 100,000 ton-per-year scale CCS pilot project in China with an injection operation lasting nearly 3 years. In this study, we investigate various geostatistical methods and their impact on the respective geologic models on which simulation is performed to understand the phenomena observed during 3 years of Shenhua CCS operations. Although there was a brief period of wellhead pressure increase at the injection well, it unexpectedly dropped for most of the time. Another interesting observation showed that the majority of CO 2 gas injection was received by the topmost sandstone Liujiagou formation instead of the basement limestone Majiagou formation, which was predicted to have much more injectivity and storage capacity. Based on the current geostatistical methods and available data, 3 steps of reservoir modeling and flow simulation are carried out and they go from having homogeneous property models to incorporating standard 2-point geostatistical methods to using object-based models. The layer-cake models generate a rather uniform plume shape and increased pressure response. Meanwhile, two-point statistical models add more complexity to the size and shape of CO 2 plume, however are not capable of reproducing the pressure decline behavior. These results demonstrate homogeneous and 2-point geostatistical models are inadequate in interpreting subsurface heterogeneity, both due to their method and data limitations. Further work is being done with object-based models to produce a system of meandering rivers based on the geological concept of Shenhua injection site. This will help offset the data limitation and bring our model closer to geologic reality.

54 ENVIRONMENTAL SCIENCES↗

CO oxidation on nanoporous gold: A combined TPD and XPS study of active catalysts

Disks of nanoporous gold (np-Au), produced by leaching of silver from AgAu alloy and prepared as active catalysts for CO oxidation in a continuous-flow reactor, were investigated in detail by x-ray photoelectron spectroscopy and temperature-programmed desorption spectroscopy in ultra-high vacuum. Np-Au exhibits several oxygen species on and in the surface: Chemisorbed oxygen (O act ), probably generated at residual silver sites at the surface, is readily available after np-Au preparation and consumed by CO oxidation. It can be replenished on activated np-Au by exposure to O 2 . In addition, strongly bound oxygen, probably at subsurface sites, is present as a major species and not consumed by CO oxidation. Pronounced CO desorption at temperatures above 200 K observed after exposing np-Au to CO at 105 K indicates an additional, more stable type of CO binding sites on np-Au as compared to pure gold. Only CO at these binding sites is consumed by oxidation reaction with O act . In conclusion, we propose that the presence of strongly bound subsurface oxygen stabilizes CO adsorption on np-Au, thereby being as crucial for the observed catalytic activity of np-Au as residual silver.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of surface runoff and infiltration partition methods on hydrological modeling: A comparison of four schemes in two watersheds in the Northeastern US

The ratio according to which the precipitation/snowmelt is divided into surface and subsurface water is of primary importance to watershed scale hydrological modeling. The present study compared four different surface runoff and infiltration partition methods in the Richards-equation-based SWAT model (RSWAT), i.e., daily curve number method (DC-RSWAT), hourly curve number method (HC-RSWAT), Green-Ampt method (GA-RSWAT), and effective infiltration capacity method (EIC-RSWAT). These four versions of RSWAT and a daily-curve-number-based SWAT (DC-SWAT) were used to simulate daily flow rate (from 2001 to 2015) at the outlets of the Tuckahoe Creek Watershed (TCW) and Greensboro Watershed (GW) of the Chesapeake Bay in Maryland. Parameter sensitivity analysis, calibration, and prediction uncertainty analysis were conducted. The results indicate that surface runoff and infiltration partition methods have pronounced impacts on model performance. Comparative analysis showed that DC-RSWAT outperformed other versions of RSWAT for both calibration (from 2001 to2007) and validation (from 2008 to 2015) periods in the two test watersheds. In general, DC-RSWAT achieved more accurate deterministic flow simulation and reliable uncertainty estimation than other versions. As such, daily-curve-number method is recommended for surface runoff and infiltration partition in RSWAT for simulating stream flow.

hydrology, modeling, streamflow↗

Deep Learning for Simultaneous Inference of Hydraulic and Transport Properties

Abstract Identification of a heterogeneous conductivity field and reconstruction of a contaminant release history are key aspects of subsurface remediation. These two goals are achieved by combining model predictions with sparse and noisy hydraulic head and concentration measurements. Solution of this inverse problem is notoriously difficult due to, in part, high dimensionality of the parameter space and high computational cost of repeated forward solves. We use a convolutional adversarial autoencoder (CAAE) to parameterize a heterogeneous non‐Gaussian conductivity field via a low‐dimensional latent representation. A three‐dimensional dense convolutional encoder‐decoder (DenseED) network serves as a forward surrogate of the flow and transport model. The CAAE‐DenseED surrogate is fed into the ensemble smoother with multiple data assimilation (ESMDA) algorithm to sample from the Bayesian posterior distribution of the unknown parameters, forming a CAAE‐DenseED‐ESMDA inversion framework. The resulting CAAE‐DenseED‐ESMDA inversion strategy is used to identify a three‐dimensional contaminant source and conductivity field. A comparison of the inversion results from CAAE‐ESMDA with physical flow and transport simulator and from CAAE‐DenseED‐ESMDA shows that the latter yields accurate reconstruction results at the fraction of the computational cost of the former.

Zhou, Zitong↗

Removal of Historic Low-Level Radioactive Waste from the Highland Drive South and Alexander Street Ravines - 19155

In Port Hope, the Highland Drive South Ravine (HDSR) is the discharge area for groundwater originating from the closed Highland Drive Landfill site. The presence of low-level radioactive waste (LLRW) in the HDSR is the result of a contaminated groundwater plume flowing from the landfill site. The contaminant plume contains elevated concentrations of uranium and arsenic and extends from the landfill south to discharge groundwater to shallow soils in a wet discharge area within the ravine. The groundwater discharges to Hunt's Ponds and Highland Drive South Creek, which are immediately downstream of the wet discharge area and will be included in the remediation design. Remediation and environmental management plans for HDSR have been developed within the framework of the Port Hope Project. Recent subsurface investigations have identified LLRW at greater depths than previously anticipated. Other investigations of surrounding properties have identified LLRW that is primarily from filling activities in backyards. The steep topography of the site and the presence of the creek and seepage face present remediation challenges. Also in Port Hope, the LLRW in the Alexander Street Ravine Area is the result of end dumping, filling of private backyards and stack deposition from the former refinery. The original site extent was focused on the deeper contamination due to end dumping and included a portion of Alexander Creek. However, recent investigations have confirmed other fill areas and the extent of stack deposition that are generally contiguous with the end dumping area. Restricted access to the site will result in all remediation in this area taking place via a single access point along the narrow existing Hayward Street. While both of these sites are ravines in Port Hope containing LLRW, the origins of contamination and remediation approaches are very different. This paper will compare these two challenging remediation sites. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Scale-dependent desorption of uranium from contaminated subsurface sediments

Column experiments were performed to investigate the scale-dependent desorption of uranyl [U(VI)] from a contaminated sediment collected from the Hanford 300 Area at the US Department of Energy (DOE) Hanford Site, Washington. The sediment was a coarse-textured alluvial flood deposit containing significant mass percentage of river cobble. U(VI) was, however, only associated with its minor, fine-grained (< 2mm) mass fraction. U(VI) desorption was investigated both from the field-textured sediment using a large column (80 cm length by 15 cm inner diameter), and from its < 2mm, U(VI)-associated mass fraction using a small column (10 cm length by 3.4 cm inner diameter). Dynamic advection conditions with intermittent flow and stop-flow events of variable durations were employed to investigate U(VI) desorption kinetics and its scale dependence. A multi-component kinetic model that integrated a distributed rate expression with surface complexation reactions successfully described U(VI) release from the fine-grained, U(VI)-associated materials. The field-textured sediment in the large column displayed dual domain, tracer-dependent mass transfer properties that affected the breakthrough curves of bromide, pentafluorobenzoic acid (PFBA), and tritium. The tritium breakthrough curve showed stronger non-equilibrium behavior than did PFBA and bromide, and required a larger immobile porosity to describe. The dual domain mass transfer properties were then used to scale the kinetic model of U(VI) desorption developed for the fine-grained materials to describe U(VI) release and reactive transport in the field-textured sediment. Numerical simulations indicated that the kinetic model that was integrated with the dual domain properties determined from tracer PFBA and Br best described the experimental results. The kinetic model without consideration of the dual domain properties over-predicted effluent U(VI) concentrations, while the model based on tritium mass transfer under-predicted the rate of U(VI) release. Overall, our results indicated that the kinetics of U(VI) release from the field-textured sediment were different from that of its fine-grained, U(VI)-associated mass fraction. However, the desorption kinetics measured on the U(VI)-containing mass fraction could be scaled to describe U(VI) reactive transport in the contaminated field-textured sediment after proper consideration of the physical transport properties of the sediment. The research also demonstrated a modeling approach to integrate geochemical processes into field scale reactive transport models.

54 ENVIRONMENTAL SCIENCES↗

The value of in-reservoir energy storage for flexible dispatch of geothermal power

Geothermal systems making use of advanced drilling and well stimulation techniques have the potential to provide tens to hundreds of gigawatts of clean electricity generation in the United States by 2050. With near-zero variable costs, geothermal plants have traditionally been envisioned as providing “baseload” power, generating at their maximum rated output at all times. However, as variable renewable energy sources (VREs) see greater deployment in energy markets, baseload power is becoming increasingly less competitive relative to flexible, dispatchable generation and energy storage. Herein we conduct an analysis of the potential for future geothermal plants to provide both of these services, taking advantage of the natural properties of confined, engineered geothermal reservoirs to store energy in the form of accumulated, pressurized geofluid and provide flexible load-following generation. We develop a linear optimization model based on multi-physics reservoir simulations that captures the transient pressure and flow behaviors within a confined, engineered geothermal reservoir. We then optimize the investment decisions and hourly operations of a power plant exploiting such a reservoir against a set of historical and modeled future electricity price series. Further, we find that operational flexibility and in-reservoir energy storage can significantly enhance the value of geothermal plants in markets with high VRE penetration, with energy value improvements of up to 60% relative to conventional baseload plants operating under identical conditions. Across a range of realistic subsurface and operational conditions, our modeling demonstrates that confined, engineered geothermal reservoirs can provide large and effectively free energy storage capacity, with round-trip storage efficiencies comparable to those of leading grid-scale energy storage technologies. Optimized operational strategies indicate that flexible geothermal plants can provide both short- and long-duration energy storage, prioritizing output during periods of high electricity prices. Sensitivity analysis assesses the variation in outcomes across a range of subsurface conditions and cost scenarios.

15 GEOTHERMAL ENERGY↗

Techno-economic feasibility of geothermal energy production using inactive oil and gas wells for district heating and cooling systems in Tuttle, Oklahoma

Oil and gas wells have been drilled in the United States and often encounter hot co-produced water possibly suitable for geothermal direct-use applications. Here this study evaluated geothermal resources, heating and cooling demand, and techno-economic potential of four oil and gas wells repurposed for geothermal energy production to serve two public schools and 250 nearby houses in Tuttle, Oklahoma, USA. Subsurface geology in the study area primarily consists of Permian to Mississippian sandstone and limestone formations approximately from 2 km to 3.5 km depth. With a geothermal gradient of 25.3 °C/km, the temperature of geothermal energy production was estimated as 68.2 °C at 2.1 km. The potential of calcite scaling within boreholes and pipes was minimal. Using the characterized reservoir properties, techno-economic analyses were conducted for evaluating levelized costs of geothermal energy production for direct-use heating and cooling and district heating systems with five different production scenarios. Heating and cooling demand in two schools and 250 houses and additional 0.3 MW and 0.6 MW base heating loads for potential geothermal direct-use applications in the study area were also incorporated in the modeling. Results indicated that the levelized cost of heating of geothermal district heating systems utilizing existing wells were significantly lower than those of conventional geothermal energy systems that include well drillings. The geothermal energy production with doublet and quartet configurations was generally sufficient to supply total annual heating demand in the district, while a peaking boiler was used to supply peak loads. Doublet configurations showed higher production temperature with a lower thermal drawdown than the quartet configurations. The doublet system at 2.1 km production depth with 9.3 kg/s flow rate represented the optimal levelized cost of $71/MWh and 91.2% utilization factor. These results imply that the Tuttle geothermal district heating system is techno-economically feasible and comparable to geothermal district heating systems in the United States and the regional natural gas rate for residentials by recycling inactive oil and gas wells with no drillings.

15 GEOTHERMAL ENERGY↗

The hysteresis response of soil CO 2 concentration and soil respiration to soil temperature

Diurnal hysteresis between soil temperature (T s ) and both CO 2 concentration ([CO 2 ]) and soil respiration rate (R s ) were reported across different field experiments. However, the causes of these hysteresis patterns remain a subject of debate, with biotic and abiotic factors both invoked as explanations. Here, to address these issues, a CO 2 gas transport model is developed by combining a layer-wise mass conservation equation for subsurface gas phase CO 2 , Fickian diffusion for gas transfer, and a CO 2 source term that depends on soil temperature, moisture, and photosynthetic rate. Using this model, a hierarchy of numerical experiments were employed to disentangle the causes of the hysteretic [CO 2 ]-T s and CO 2 flux T s (i.e., F-T s ) relations. Model results show that gas transport alone can introduce both [CO 2 ]-T s and F-T s hystereses and also confirm prior findings that heat flow in soils lead to [CO 2 ] and F being out of phase with T s , thereby providing another reason for the occurrence of both hystereses. The area (A hys ) of the [CO 2 ]-T s hysteresis near the surface increases, while the A hys of the Rs-Ts hysteresis decreases as soils become wetter. Moreover, a time-lagged carbon input from photosynthesis deformed the [CO 2 ]-T s and R s -T s patterns, causing a change in the loop direction from counterclockwise to clockwise with decreasing time lag. An asymmetric 8-shaped pattern emerged as the transition state between the two loop directions. Lastly, tracing the pattern and direction of the hysteretic [CO 2 ]-T s and R s -T s relations can provide new ways to fingerprint the effects of photosynthesis stimulation on soil microbial activity and detect time lags between rhizospheric respiration and photosynthesis.

58 GEOSCIENCES↗

Spatially tracking carbon through the root-rhizosphere-soil system using laser ablation-IRMS

The intimate relationships between plant roots, rhizosphere, and soil are fostered by the release of organic compounds from the plant into soil through various forms of rhizodeposition and the simultaneous harvestingof inorganic nutrients from the soil to the plant. Here we present a method to spatially track and map the migration of plant-derived carbon (C) through roots into the rhizosphere and surrounding soil using laser ablation-isotope ratio mass spectrometry (LA-IRMS). Weused switchgrass microcosms containing soil from field plots at the Kellogg Biological Station (Hickory Corners, Michigan, USA), which have been cropped with switchgrass since 2008. We used a 13 CO 2 tracerto isotopically label switchgrass plants for two diel cycles and tracked subsequent movement of labeled C using the spatially specific (<100 µm resolution) δ 13 C analysis enabled by LA-IRMS.This approach permitted assessment of variable C flow through different roots and enabled mapping of spatial variability of C allocation to the rhizosphere. Highly 13 C-enriched C (consistent with production during the 13 CO 2 application period) extended ~0.5 – 1 mm from the root into the soil, suggesting that the majority of recent plant-derived C was within this distance of the root after 48 hours. Tracking the physical extent of root exudation into the rhizosphere can help evaluate the localization of plant-microbe interactions in highly variable subsurface environments,and the use of the isotopic label can differentiate freshly fixed C (presumably from root exudates) from other types of subsurface C (e.g., plant necromass and microbial turnover). The LA-IRMS technique mayalso serve as a valuable screening technique to identify areas of high activity for additional microbial or geochemicalassays.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of CO 2 -brine-rock reactions on pore architecture and permeability in dolostone: Implications for CO 2 storage and EOR

Geologic carbon sequestration (GCS) is considered a feasible technology for storing substantive volumes of greenhouse gases in subsurface geological formations. In the reservoir, far from carbon dioxide (CO 2 ) injection wells or in post-injection scenarios, diffusion dominates over advection. This condition conjoins with spatially distributed geochemical reactions to induce heterogeneous changes in pore architecture, i.e. pore body and throat sizes or surface roughness. These changes can affect CO 2 transport properties and storage capacity. In this work, we investigated mineral dissolution and precipitation in dolomite samples saturated with a CO 2 -saturated brine at 93 °C and 34.5 MPa, aged without flow. Two rock types samples, i.e. intergranular- and vuggy-dominant, were selected to investigate changes in pore size, porosity and permeability under reactive conditions. Mineral dissolution and precipitation were characterized using scanning electron microscopy. Changes in pore size were quantified via time-domain nuclear magnetic resonance (TD-NMR) transverse relaxation time (T 2 ) and diffusion coefficient (D) distributions. We show that mineral dissolution likely occurs in highly permeable pathways. These observations are confirmed through analysis of (T 2 ) and diffusion coefficient (D) distributions. In contrast to results during CO 2 -enriched brine continuous injection, mineral precipitation was observed in micropores. The leftward shift of the T 2 peaks, corresponding to micropores, also evidenced mineral precipitation in lowpermeability zones. However, microscale alterations resulted only in a subtle increase in porosity and permeability. Results in this study shed light on effects of geochemical reactions on alteration of rock properties in diffusion-dominated regions during CO 2 storage.

58 GEOSCIENCES↗

Developing Methods to Assess Changes in Mechanical Properties of Shale Modified by Engineered Mineral Precipitation

Fractures in subsurface shale formations serve multiple purposes, for example, in the recovery of resources in hydraulic fracturing or as potential harmful leakage passages through caprocks that may contribute undesired fluids to the atmosphere or functional groundwater aquifers. A proposed method to seal or influence fracture properties is Ureolysis-Induced Calcium Carbonate Precipitation (UICP), a bio-mineralization technology driven by the enzymatic hydrolysis of urea, resulting in the formation of calcium carbonate. The resulting calcium carbonate can bridge the gaps in fractured shale and reduce fluid flow through fractures. This study represents the first step toward determining the influence of UICP treatment on shale material and its subsequent mechanical strength properties. The goal of this preliminary work is twofold: first, we aim to identify a method to test tensile strength along a core axis and second, we seek to assess the effect of temperature on the tensile strength of intact, unfractured shale cores (2.54 cm (1 in) diameter, 5.08 cm (2 in) long for comparison with future fractured and UICP-treated cores. A modified Brazilian indirect tensile strength test successfully measured splitting tensile strength of shale cores from Eagle Ford and Wolfcamp formations at room temperature and 60°C.

clastic rock↗

Conservative solute transport processes and associated transient storage mechanisms: Comparing streams with contrasting channel morphologies, land use and land cover

Abstract Land use within a watershed impacts stream channel morphology and hydrology and, therefore, in‐stream solute transport processes and associated transient storage mechanisms. This study evaluated transport processes in two contrasting stream sites where channel morphology was influenced by the surrounding land use, land cover, climate and geologic controls: Como Creek, CO, a relatively undisturbed, high gradient, forested stream with a gravel bed and complex channel morphology, and Clear Creek, IA, an incised, low‐gradient stream with low‐permeability substrate draining an agricultural landscape. We performed conservative stream tracer injections at these sites to address the following questions: (1) How does solute transport vary between streams with differing morphologies? and (2) How does solute transport at each stream site change as a function of discharge? We analysed in‐stream tracer time series data and compared results quantifying solute attenuation in surface and subsurface transient storage zones. Significant trends were observed in these metrics with varying discharge conditions at the forested site but not at the agricultural site. There was a broad range of transport mechanisms and evidence of substantial exchange with both surface and hyporheic transient storage in the relatively undisturbed, forested stream. Changing discharge conditions activated or deactivated different solute transport mechanisms in the forested site and greatly impacted advective travel time. Conversely in the simplified agricultural stream, there was a narrow range of solute transport behaviour across flows and predominantly surface transient storage at all measured discharge conditions. These results demonstrate how channel simplification inhibits available solute transport mechanisms across varying discharge conditions.

54 ENVIRONMENTAL SCIENCES↗

Plutonium reactive transport in fractured granite: Multi-species experiments and simulations

Plutonium (Pu) in the subsurface environment can transport in different oxidation states as an aqueous solute or as colloidal particles. The transport behavior of Pu is affected by the relative abundances of these species and can be difficult to predict when they simultaneously exist. This study investigates the concurrent transport of Pu intrinsic colloids, Pu(IV) (aq) and Pu(V-VI) (aq) through a combination of controlled experiments and semi-analytical dual-porosity transport modeling. Pu transport experiments were conducted in a fractured granite at high and low flow rates to elucidate sorption processes and their scaling behavior. In the experiments, Pu(IV) (aq) was the least mobile of the Pu species, Pu(V-VI) (aq) had intermediate mobility, and the colloidal Pu, which consisted mainly of precipitated and/or hydrolyzed Pu(IV), was the most mobile. The semi-analytical modeling revealed that the sorption of each Pu species was rate-limited, as the sorption could not be described by assuming local equilibrium in the experiments. The model was able to describe the sorption of the different Pu species that occurring either on fracture surfaces, in the pores of the rock matrix, or simultaneously in both locations. While equally good fits to the data could be achieved using any of these assumptions, a fracture-dominated process was considered to be the most plausible because it provided the most reasonable estimates of sorption rate constants. Importantly, a key result of this work is that the sorption rate constant of all Pu species tends to decrease with increasing time scales, which implies that Pu will tend to be more mobile at longer time scales than observations at shorter time scales suggest. This result has important implications for predicting the environmental impacts of Pu in the safety assessments of geologic repositories for radioactive waste disposal, and we explore potential mechanistic bases for upscaling the sorption rate constants to time and distance scales that cannot be practically evaluated in experiments.

58 GEOSCIENCES↗

Dynamic Surface Incorporation of Pb 2+ Ions at the Actively Dissolving Calcite (104) Surface

The reaction of dissolved Pb 2+ with calcite surfaces at near-equilibrium conditions involves adsorption of Pb 2+ and precipitation of secondary heteroepitaxial Pb-carbonate minerals. A more complex behavior is observed under far-from-equilibrium conditions, including strong inhibition of calcite dissolution, development of microtopography, and near-surface incorporation of multiple monolayers (ML) of Pb 2+ without precipitation of secondary phases [where 1 ML ≡ 1 Ca/20.2 Å 2 , the crystallographic site density of the calcite (104) lattice plane]. However, the mechanistic controls governing far-from-equilibrium reactivity are not well understood. Here, in this study, we observe the interfacial incorporation of dissolved Pb 2+ during the dissolution of calcite (104) surfaces at pH ~3.7 in a flow-through reaction cell, revealing the formation of a ~1 nm thick Pb-rich calcite layer with a total Pb coverage of ~1.4 ML. These observations of the sorbed Pb distribution used resonant anomalous X-ray reflectivity, X-ray fluorescence, and nanoinfrared atomic force microscopy. We propose that this altered surface layer represents a novel sorption mode that is stabilized by conditions of sustained disequilibrium. This behavior may significantly impact the transport of dissolved metals during disequilibrium processes occurring in acid mine drainage and subsurface CO 2 injection and, if appropriately accounted for, could improve the predictive capability of geochemical reactive-transport models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transient Pressure Interference During CO2 Injection in Saline Aquifers

Abstract CO2 injection in subsurface geological formations (e.g. deep saline aquifers) causes pressure perturbations over a large area surrounding the injection well. Observation wells are widely considered in geologic CO2 storage (GCS) projects where the pressure perturbation induced by CO2 injection is measured. In this work, we use analytical and numerical modeling tools along with field data to examine the pressure behavior in GCS projects before and after CO2 arrival at an observation well. Prior to CO2 arrival, a baseline pressure trend is established which corresponds to single-phase brine flow across the observation well (approximated by Theis solution). Therefore, analysis of early-time pressure data is straightforward, provides the single-phase flow characteristics (mobility and storativity), and helps establishing a baseline pressure change that can be extended beyond the single-phase flow period at the observation well. Upon CO2 arrival, a departure from this baseline trend is expected. For the pressure to detect the CO2 arrival at an observation well, the departure from baseline pressure behavior must be significant and well above the background noise levels. We use existing analytical models to determine the strength of the expected pressure departure signal from the baseline trend upon CO2 arrival. The strength of the expected pressure departure is found to be directly proportional to the mobility ratio. Accordingly, we establish a criterion to determine whether the pressure at an observation well can detect the CO2 arrival. We present an analysis approach through application to synthetic and field data and show the characteristic pressure behavior before and after CO2 arrival. We show that while generally the pressure can be either above or below the expected baseline pressure trend, it would be likely above the baseline upon CO2 arrival. This is because the mobility ratio becomes less than unity after CO2 arrival. We show that depending on the reservoir characteristics, changes in the pressure trend may or may not be sufficient to detect the CO2 arrival.

Engineering↗

Tectonics of the Outer Planet Satellites

Tectonic features on the satellites of the outer planets range from the familiar, such as clearly recognizable graben on many satellites, to the bizarre, such as the ubiquitous double ridges on Europa, the twisting sets of ridges on Triton, or the isolated giant mountains rising from Io's surface. All of the large and middle-sized outer planet satellites except Io are dominated by water ice near their surfaces. Though ice is a brittle material at the cold temperatures found in the outer solar system, the amount of energy it takes to bring it close to its melting point is lower than for a rocky body. Therefore, some unique features of icy satellite tectonics may be influenced by a near-surface ductile layer beneath the brittle surface material, and several of the icy satellites may possess subsurface oceans. Sources of stress to drive tectonism are commonly dominated by the tides that deform these satellites as they orbit their primary giant planets. On several satellites, the observed tectonic features may be the result of changes in their tidal figures, or motions of their solid surfaces with respect to their tidal figures. Other driving mechanisms for tectonics include volume changes due to ice or water phase changes in the interior, thermoelastic stress, deformation of the surface above rising diapirs of warm ice, and motion of subsurface material toward large impact basins as they fill in and relax. Most satellites exhibit evidence for extensional deformation, and some exhibit strike-slip faulting, whereas contractional tectonism appears to be rare. Io s surface is unique, exhibiting huge isolated mountains that may be blocks of crust tilting and foundering into the rapidly emptying interior as the surface is constantly buried by deposits from hyperactive volcanoes. Of the satellites, diminutive Enceladus is spectacularly active; its south polar terrain is a site of young tectonism, copious heat flow, and tall plumes venting into space. Europa's surface is pervasively tectonized, covered with a diverse array of exotic and incompletely understood tectonic features. The paucity of impact craters on Europa suggests that its tectonic activity is ongoing. Geysers on Triton show that some degree of current activity, while tectonic features that cross sparsely cratered terrain indicate that it may also be tectonically active. Ganymede and Miranda both exhibit ancient terrains that have been pulled apart by normal faulting. On Ganymede these faults form a global network, while they are confined to regional provinces on Miranda. Ariel, Dione, Tethys, Rhea, and Titania all have systems of normal faults cutting across their surfaces, though the rifting is less pronounced than it is on Ganymede and Miranda. Iapetus exhibits a giant equatorial ridge that has defied simple explanation. The rest of the large and middle-sized satellites show very little evidence for tectonic features on their surfaces, though the exploration of Titan's surface has just begun.

McKinnon, W. B.↗