Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulated waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

The propagation of spark-produced N waves through turbulence

A model experiment was designed and built to simulate the propagation of sonic booms through atmospheric turbulence. The setup of the model experiment is described briefly. Measurements of the N waves after they propagated across the turbulent velocity field reveal the same waveform distortion and change in rise time as for sonic booms. The data from the model experiment is used to test sonic boom models. Some models yield predictions for the waveform distortion, while others give estimates of the rise time of the sonic booms. A new theoretical model for the propagation of plane N waves through a turbulent medium is described.

Lipkens, Bart↗
NASA NTRS2016

Ultrasonic NDE Simulation for Composite Manufacturing Defects

The increased use of composites in aerospace components is expected to continue into the future. The large scale use of composites in aerospace necessitates the development of composite-appropriate nondestructive evaluation (NDE) methods to quantitatively characterize defects in as-manufactured parts and damage incurred during or post manufacturing. Ultrasonic techniques are one of the most common approaches for defect/damage detection in composite materials. One key technical challenge area included in NASA's Advanced Composite's Project is to develop optimized rapid inspection methods for composite materials. Common manufacturing defects in carbon fiber reinforced polymer (CFRP) composites include fiber waviness (in-plane and out-of-plane), porosity, and disbonds; among others. This paper is an overview of ongoing work to develop ultrasonic wavefield based methods for characterizing manufacturing waviness defects. The paper describes the development and implementation of a custom ultrasound simulation tool that is used to model ultrasonic wave interaction with in-plane fiber waviness (also known as marcelling). Wavefield data processing methods are applied to the simulation data to explore possible routes for quantitative defect characterization.

Leckey, Cara A. C.↗
DOE OSTI2020

A regression algorithm for accelerated lattice QCD that exploits sparse inference on the D-Wave quantum annealer

We propose a regression algorithm that utilizes a learned dictionary optimized for sparse inference on a D-Wave quantum annealer. In this regression algorithm, we concatenate the independent and dependent variables as a combined vector, and encode the high-order correlations between them into a dictionary optimized for sparse reconstruction. On a test dataset, the dependent variable is initialized to its average value and then a sparse reconstruction of the combined vector is obtained in which the dependent variable is typically shifted closer to its true value, as in a standard inpainting or denoising task. Here, a quantum annealer, which can presumably exploit a fully entangled initial state to better explore the complex energy landscape, is used to solve the highly non-convex sparse coding optimization problem. The regression algorithm is demonstrated for a lattice quantum chromodynamics simulation data using a D-Wave 2000Q quantum annealer and good prediction performance is achieved. The regression test is performed using six different values for the number of fully connected logical qubits, between 20 and 64. The scaling results indicate that a larger number of qubits gives better prediction accuracy.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Optimization of an electron injector for operating high-intensity polarized electron beam

In this work, the simulation and optimization of an electron injector that operates a high-intensity polarized electron beam are presented. The electron injector would provide a single-bunch electron beam at a repetition rate of 1 Hz with a bunch charge of 10 nC, kinetic energy of 400 MeV and an electron spin polarization of 85%. A direct current (DC) high-voltage photogun was employed to produce the 10 nC polarized electron beam with a kinetic energy of 350 keV, beam diameter of 1.44 cm (Gaussian distribution with σ of 0.36 cm) and full bunch length of 1.3 ns (Gaussian distribution with σ of 0.325 ns). The beam was compressed to 6 ps of RMS bunch length using one 114.24 MHz standing-wave sub-harmonic buncher, two 571.2 MHz standing-wave sub-harmonic bunchers and one 2.856 GHz traveling-wave buncher. The beam was accelerated finally to 400 MeV via eight 2.856 GHz traveling-wave Linacs. We performed the beam simulation, and the simulated results showed that the optimized RMS bunch length was 4.65 ps, RMS relative energy spread was 0.48% and normalized RMS transverse emittance was 30.13 mm · mrad at a beam energy of 400 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1994

Electrotastic Solitary Waves (ESW) in the magnetotail: BEN wave forms observed by GEOTAIL

Wave forms of BEN (Broadband Electrostatic Noise) in the geomagnetic tail were first detected by the Wave Form Capture reciever on the GEOTAIL spacecraft. The results show that most of the BEN in the plasma sheet boundary layer (PSBL) are not continuous broadband noise but are composed of a series of solitary pulses having a special form which we term 'Electrostatic Solitary Waves (ESW)'. A nonlinear BGK potential model is proposed as the generation mechanism for the ESW based upon a simple particle simulation which considers the highly nonlinear evolution of the electron beam instability. The wave forms produced by this simulation are very similar to those observed by GEOTAIL and suggest that the nonlinear dynamics of the electron beam play an essential role in the generation of ESW.

Matsumoto, H.↗
DOE OSTI2025

Increasing the hardness of posiform planting using random QUBOs for programmable quantum annealer benchmarking

Posiform planting is a method for constructing QUBO instances with a unique planted solution that can be tailored to arbitrary connectivity graphs. In this study we investigate making posiform planted QUBOs computationally harder by fusing many smaller random Ising models, whose global minimum is computed classically, with posiform planted QUBOs. The unique ground state of the resulting QUBO is the concatenation of (exactly one of) the ground states of each smaller problem. Our method generates QUBO instances that have a unique solution, are native to the hardware graph, and have tunable computational hardness. We use our QUBOs to benchmark three D-Wave quantum annealing processors (with 563–5627 qubits), and compare them against simulated annealing and Gurobi. Surprisingly, we find that the D-Wave ground state sampling success rate is not dependent on the glued random QUBO size, and that some QUBO classes are solved at high success rates at short annealing times on the Zephyr processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1975

AMPS data management requirements study, appendix 1

Flow charts and display formats for the simulation of five experiments are given. The experiments are: (1) electromagnetic wave transmission; (2) passive observations of ambient plasma; (3) ionospheric measurements with subsatellite; (4) electron accelerator beam measurements; and (5) measurement of acoustical gravity waves in the sodium layer using lasers. A detailed explanation of the simulation procedure, definition of variables, and an explanation of how the experimenter makes display choices is also presented. A functional description is included on each flow chart and the assumptions and definitions of terms and scope of the flow charts and displays are presented.

Source record↗
DOE OSTI2021

Influence of the Kuroshio Intrusion on Deep Flow Intraseasonal Variability in the Northern South China Sea

Abstract Interactions between the open ocean and marginal seas have been suggested to be critical to the redistribution and dissipation of global energy. Here, we propose a mechanism for the upper open ocean influencing the deep flow in marginal seas that hinges on the formation and propagation of topographic Rossby waves (TRWs). Observations and high‐resolution simulations suggest substantial intraseasonal variability with periods of 5–60 days associated with the deep flow over continental slopes of the northern South China Sea (NSCS). These fluctuations generally account for over 40% of the total deep kinetic energy variability and the number can reach 70% over the slopes to the west of the Luzon Strait, southwest of the Dongsha Islands, and northeast of the Xisha Islands. By examining the spatiotemporal features of the fluctuations, we demonstrate that the intraseasonal variability of the deep flow in the NSCS is closely associated with TRWs. Using a recently developed multiscale energetics analysis in combination with a ray tracing model, we show that the energy sources of TRWs can be traced back to the east of the Dongsha Islands, where the Kuroshio intrusion and related eddies energize the TRWs primarily through pressure work. These waves propagate westward across the NSCS and drive the intraseasonal variability of the deep flow over continental slopes. Our findings highlight an energy pathway from the open ocean western boundary current to the abyssal marginal sea that could modulate regional circulation as well as exchanges between major ocean basins.

Quan, Qi↗
DOE OSTI2022

Effect of the Grell-Freitas Deep Convection Scheme in Quasi-Uniform and Variable-Resolution Aquaplanet CAM Simulations

The Grell-Freitas deep convection scheme (GF) has been implemented in the Community Atmosphere Model (CAM) with the nonhydrostatic Model for Prediction Across Scales (MPAS) dynamical core. Aquaplanet simulations have been performed with a global quasi-uniform resolution mesh with ~120 km grid spacing and a variable resolution mesh employing a circular refined region with ~30 km grid spacing centering at the equator and ~120 km elsewhere. GF produces overall patterns of the general circulations comparable to those of other aquaplanet experiments, including those produced using the default Zhang-McFarlane convection scheme (ZM) in CAM Version 5.4. GF alleviates the overestimated occurrence of weak intensity precipitation characteristic of ZM due to GF’s different closure methods and deep-convection trigger conditions. Compared to ZM, the GF characteristics of the equatorial Kelvin waves are closer to observations. GF also better simulates precipitation at variable resolution, with no unrealistic wave distortion by the refinement. Overall, GF shows less sensitivity of convective precipitation and heating/moistening tendencies to changes in horizontal resolution compared to ZM. However, vertically-overlapped total cloud fraction simulated with GF in the tropics is more sensitive to the resolution than ZM due to the larger resolution-sensitivity of high-level cloud fraction in the tropics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Investigation of mode activity in NBI-heated experiments of Wendelstein 7-X

The 2018 operation phase (OP 1.2b) of the stellarator Wendelstein 7-X (W7-X) included, for the first time, neutral beam injection (NBI) to heat the plasma. Since the injection geometry at W7-X is not parallel, this generates both passing and trapped fast particles. During longer phases of NBI injection, with the primary purpose to study the heating efficiency of this system, Alfvén eigenmodes (AEs) were observed by a number of diagnostics, including the phase contrast imaging (PCI) system, the magnetic pick-up coils (Mirnov coils), and the soft x-ray multi-camera tomography system (XMCTS). Alfvén eigenmodes are of great interest for future fusion reactors as it has been shown that the resonant interaction of fast ions with self-excited AEs can lead to enhanced transport of fast ions and potentially to energy losses. This is especially true for so-called gap-modes, Alfvén eigenmodes with frequencies in gaps of the continuous spectrum, since they lack continuum damping. These modes are commonly known to be excited by fast ions, but other destabilizing mechanisms, e.g. the electron-pressure gradient are also possible. In this article we present a first analysis of the experimentally observed frequencies from the theoretical side. The calculation of shear Alfvén wave continua for selected cases and the assignment of observed frequencies to the gaps of the continuous spectra are presented. Using the ideal-MHD code CKA (Könies A. 2007 10th IAEA TM on Energetic Particles in Magnetic Confinement System), we find gap modes that match the experimental measurements in terms of the observed frequencies. We emphasize the crucial roles played by the coupling of sound and Alfvén waves as well as of the Doppler shift arising as a consequence of the radial electric field in W7-X. We employ the perturbative gyrokinetic code CKA-EUTERPE (Feh´er 2013 Simulation of the interaction between Alfv´en waves and fast particles), using a slowing-down distribution function for the fast ions as calculated by the Monte-Carlo particle following code ASCOT (Hirvijoki et al 2014 Comput. Phys. Commun. 185 1310–21) to assess the fast-ion drive. Here we find that the fast-ion drive is insufficient to overcome the background-plasma damping. The fact that unstable modes were observed experimentally may point to problems with the modelling or indicate the existence of other destabilizing mechanisms, e.g. associated with the electron-pressure gradient (Windisch et al 2017 Plasma Phys. Control. Fusion 59 105002) that sensitively depend on the profiles of the background plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1985

Nonlinear evolution of slow waves in the solar wind

It is shown by numerical simulation using a hybrid code that comparison of the nonlinear steepening rate, calculated from fluid theory, with the linear collisionless damping rate defines reasonably well the parameters for which fast and slow MHD waves should steepen. The results indicate that, whereas fast modes should ordinarly steepen, steepened slow waves should occur rarely in the solar wind near 1 AU.

Hada, T.↗
DOE OSTI2024

Ground-motions site and event specificity: Insights from assessing a suite of simulated ground motions in the San Francisco Bay Area

This article presents the results of a research that is part of a larger collaborative effort between the Lawrence Berkeley National Laboratory and the Pacific Earthquake Engineering Research Center, funded by the US Department of Energy Office of Cybersecurity, Energy Security and Emergency Response. The main objective of this study is to assess a suite of near and far-field simulated ground motions obtained from 20 realizations of an M7 Hayward Fault earthquake in the San Francisco Bay Area, California USA, and inform the selection of rupture simulation parameters leading to strong motions. To this aim, comparisons are conducted with NGA-W2 and directivity ground-motion models and a selected population of records. An archetypal steel moment-resisting frame is utilized to assess infrastructure response distributions. The analyses carried out for each simulated event and subdomain with consistent properties in terms of shallow shear-wave velocity proved to be instrumental for better interpreting the differences between simulated motions and empirical models. The main reasons identified for variances between simulations and empirical relationships included (1) directivity effects fully captured by the simulations across the full breadth of rupture models; (2) site vicinity to ruptures that incorporate large-slip patches, particularly if these are in the forward-directivity direction; and (3) presence of geologic structures that can “trap” seismic waves and produce ground motions with large amplitude and long signal duration. The analyses carried out in this work provide a path for interpreting ground-motion site and event specificity obtained from a suite of physics-based simulations, differing only in the rupture model characterization, to inform the selection of simulation scenarios for site-specific engineering analyses under strong excitations. Evidence from this work points to the possibility that current hazard models may underestimate ground-motion intensities in areas where the combined effect of directivity and site conditions results in large ground-motion amplitudes.

58 GEOSCIENCES↗
DOE OSTI2021

Orbital Evolution of Binary Black Holes in Active Galactic Nucleus Disks: A Disk Channel for Binary Black Hole Mergers?

We perform a series of high-resolution 2D hydrodynamical simulations of equal-mass binary black holes (BBHs) embedded in active galactic nucleus (AGN) accretion disks to study whether these binaries can be driven to merger by the surrounding gas. We find that the gravitational softening adopted for the BBH has a profound impact on this result. When the softening is less than 10% of the binary separation, we show that, in agreement with recent simulations of isolated equal-mass binaries, prograde BBHs expand in time rather than contract. Eventually, however, the binary separation becomes large enough that the tidal force of the central AGN disrupts them. Only when the softening is relatively large do we find that prograde BBHs harden. We determine through detailed analysis of the binary torque, that this dichotomy is due to a loss of spiral structure in the circum-single disks orbiting each black hole when the softening is a significant fraction of the binary separation. Properly resolving these spirals—both with high resolution and small softening—results in a significant source of binary angular momentum. Only for retrograde BBHs do we find consistent hardening, regardless of softening, as these BBHs lack the important spiral structure in their circum-single disks. This suggests that the gas-driven inspiral of retrograde binaries can produce a population of compact BBHs in the gravitational-wave-emitting regime in AGN disks, which may contribute a large fraction to the observed BBH mergers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

GR-Athena++: General-relativistic Magnetohydrodynamics Simulations of Neutron Star Spacetimes

We present the extension of GR-Athena++ to general-relativistic magnetohydrodynamics (GRMHD) for applications to neutron star spacetimes. The new solver couples the constrained transport implementation of Athena++ to the Z4c formulation of the Einstein equations to simulate dynamical spacetimes with GRMHD using oct-tree adaptive mesh refinement. We consider benchmark problems for isolated and binary neutron star spacetimes demonstrating stable and convergent results at relatively low resolutions and without grid symmetries imposed. The code correctly captures magnetic field instabilities in nonrotating stars with total relative violation of the divergence-free constraint of 10 –16 . It handles evolutions with a microphysical equation of state and black hole formation in the gravitational collapse of a rapidly rotating star. For binaries, we demonstrate correctness of the evolution under the gravitational radiation reaction and show convergence of gravitational waveforms. We showcase the use of adaptive mesh refinement to resolve the Kelvin–Helmholtz instability at the collisional interface in a merger of magnetised binary neutron stars. GR-Athena++ shows strong scaling efficiencies above 80% in excess of 10 5 CPU cores and excellent weak scaling is shown up to ~5 × 10 5 CPU cores in a realistic production setup. GR-Athena++ allows for the robust simulation of GRMHD flows in strong and dynamical gravity with exa-scale computers.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Effect of the numerical discretization scheme in Shock-Driven turbulent mixing simulations

In this work, we evaluate the effects of distinct numerical strategies in simulations of shock-driven turbulent mixing. An air-SF 6 -air gas curtain subjected to Mach 1.2 shock-waves is computed with Implicit Large-Eddy Simulation based on three numerical schemes: directional-split with Harten-Lax-van Leer (HLL) solver; directional-unsplit using HLL-Contact (HLLC) solver; and directional-unsplit with HLLC solver and a Low Mach number Correction (LMC). The results illustrate the importance of the numerical strategy to the accuracy of the predictions. Whereas both split and unsplit schemes result in a similar spatial development of the initial shock-driven instability, only the unsplit schemes can predict the turbulent mixing transition after reshock observed by the laboratory experiments. Such feature increases the mixing rate of the two fluids, this being particularly pronounced when the LMC is active due to i) the reduced flow Mach number, and ii) the larger effective Reynolds number. Since the selected mixing problem is driven by the deposition of vorticity at the fluids’ interface, the resultant flow physics is analyzed by investigating the contribution of distinct inviscid mechanisms to the production of vorticity: baroclinicity, stretching, and dilatation. As expected, it is observed that the production of vorticity is initially dominated by the baroclinicity mechanism. Yet, the relevance of the remainder mechanisms is enhanced after the reshock and may even surpass the baroclinicity term.

42 ENGINEERING↗
NASA NTRS2016

DSMC Shock Simulation of Saturn Entry Probe Conditions

This work describes the direct simulation Monte Carlo (DSMC) investigation of Saturn entry probe scenarios and the influence of non-equilibrium phenomena on Saturn entry conditions. The DSMC simulations coincide with rarefied hypersonic shock tube experiments of a hydrogen-helium mixture performed in the Electric Arc Shock Tube (EAST) at NASA Ames Research Center. The DSMC simulations are post-processed through the NEQAIR line-by-line radiation code to compare directly to the experimental results. Improved collision cross-sections, inelastic collision parameters, and reaction rates are determined for a high temperature DSMC simulation of a 7-species H2-He mixture and an electronic excitation model is implemented in the DSMC code. Simulation results for 27.8 and 27.4 kms shock waves are obtained at 0.2 and 0.1 Torr respectively and compared to measured spectra in the VUV, UV, visible, and IR ranges. These results confirm the persistence of non-equilibrium for several centimeters behind the shock and the diffusion of atomic hydrogen upstream of the shock wave. Although the magnitude of the radiance did not match experiments and an ionization inductance period was not observed in the simulations, the discrepancies indicated where improvements are needed in the DSMC and NEQAIR models.

Modeling↗
NASA NTRS2016

DSMC Shock Simulation of Saturn Entry Probe Conditions

This work describes the direct simulation Monte Carlo (DSMC) investigation of Saturn entry probe scenarios and the influence of non-equilibrium phenomena on Saturn entry conditions. The DSMC simulations coincide with rarefied hypersonic shock tube experiments of a hydrogen-helium mixture performed in the Electric Arc Shock Tube (EAST) at the NASA Ames Research Center. The DSMC simulations are post-processed through the NEQAIR line-by-line radiation code to compare directly to the experimental results. Improved collision cross-sections, inelastic collision parameters, and reaction rates are determined for a high temperature DSMC simulation of a 7-species H2-He mixture and an electronic excitation model is implemented in the DSMC code. Simulation results for 27.8 and 27.4 km/s shock waves are obtained at 0.2 and 0.1 Torr, respectively, and compared to measured spectra in the VUV, UV, visible, and IR ranges. These results confirm the persistence of non-equilibrium for several centimeters behind the shock and the diffusion of atomic hydrogen upstream of the shock wave. Although the magnitude of the radiance did not match experiments and an ionization inductance period was not observed in the simulations, the discrepancies indicated where improvements are needed in the DSMC and NEQAIR models.

Higdon, Kyle J.↗
NASA NTRS2016

DSMC Shock Simulation of Saturn Entry Probe Conditions

This work describes the direct simulation Monte Carlo (DSMC) investigation of Saturn entry probe scenarios and the influence of non-equilibrium phenomena on Saturn entry conditions. The DSMC simulations coincide with rarefied hypersonic shock tube experiments of a hydrogen-helium mixture performed in the Electric Arc Shock Tube (EAST) at NASA Ames Research Center. To directly compare to the experimental results, the DSMC simulations are post-processed through the NEQAIR line-by-line radiation code. Improved collision cross-sections, inelastic collision parameters, and reaction rates are determined for a high temperature DSMC simulation of a 7-species H2-He mixture and an electronic excitation model is implemented in the DSMC code. Simulation results for 27.8 and 27.4 kms shock waves are obtained at 0.2 and 0.1 Torr respectively and compared to measured spectra in the VUV, UV, visible, and IR ranges. These results confirm the persistence of non-equilibrium for several centimeters behind the shock and the diffusion of atomic hydrogen upstream of the shock wave. Although the magnitude of the radiance did not match experiments and an ionization inductance period was not observed in the simulations, the discrepancies indicated where improvements are needed in the DSMC and NEQAIR models.

Saturn↗