A Simple Proposition for Improving Industrial Hygiene Air Sampling Methods
Not Available
47 OTHER INSTRUMENTATION↗
SEARCH · Engineering Papers
Results for “simple”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Simple glycolipids of microbes: Chemistry, biological activity and metabolic engineering
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A simple physiologically based pharmacokinetic model evaluating the effect of anti-nicotine antibodies on nicotine disposition in the brains of rats and humans
Physiologically based pharmacokinetic (PBPK) modeling was applied to investigate the effects of anti-nicotine antibodies on nicotine disposition in the brains of rats and humans. Successful construction of both rat and human models was achieved by fitting model outputs to published nicotine concentration time course data in the blood and in the brain. Key parameters presumed to have the most effect on the ability of these antibodies to prevent nicotine from entering the brain were selected for investigation using the human model. These parameters, which included antibody affinity for nicotine, antibody cross-reactivity with cotinine, and antibody concentration, were broken down into different, clinically-derived in silico treatment levels and fed into the human PBPK model. Model predictions suggested that all three parameters, in addition to smoking status, have a sizable impact on anti-nicotine antibodies' ability to prevent nicotine from entering the brain and that the antibodies elicited by current human vaccines do not have sufficient binding characteristics to reduce brain nicotine concentrations. If the antibody binding characteristics achieved in animal studies can similarly be achieved in human studies, however, nicotine vaccine efficacy in terms of brain nicotine concentration reduction is predicted to meet threshold values for alleviating nicotine dependence. - Highlights: • Modelling of nicotine disposition in the presence of anti-nicotine antibodies • Key vaccine efficacy factors are evaluated in silico in rats and in humans. • Model predicts insufficient antibody binding in past human nicotine vaccines. • Improving immunogenicity and antibody specificity may lead to vaccine success.
54 ENVIRONMENTAL SCIENCES↗
Estimating the population level impact of a gonococcal vaccine candidate: Predictions from a simple mathematical model
Neisseria gonorrhoeae cross-protection was suggested in a New Zealand meningitis B vaccine. We modeled the potential impact of similar vaccines on gonorrhea prevalence in heterosexuals in the United States. Here, our mathematical model incorporated infection, behavior, and vaccination dynamics. Approximate Bayesian Computation calibrated our model to US prevalence. Primary analyses assumed New Zealand vaccine characteristics: 30% efficacy and 2-year duration of protection. We estimated impact under two vaccine coverages (20%, 50%). Reduction in gonorrhea prevalence ranged from 4.8 to 39.4%, depending on vaccine coverage. Vaccine impact was correlated with both size of the highly sexually active subpopulation and sexual mixing between high and low activity subpopulations. A meningitis vaccine providing low efficacy cross-protection against gonorrhea acquisition and short duration of protection could result in a large reduction in gonorrhea prevalence in the United States. Potential dual protective effects can be considered when making vaccine recommendations.
60 APPLIED LIFE SCIENCES↗
A Simple Approach to the Technical Aspects of Radiosurgery Treatments
An approach to radiosurgery treatment that can be readily adopted in most radiotherapy centers with linear accelerators is presented. In our institution, a Leksell-type of neurosurgical frame, a computed tomography scanner, locally fabricated cones, and 6 MV X-ray beams are used to perform radiosurgery treatments. Collimated arcs with dose distributions that conform to the shape of the lesion in the transverse and the sagittal planes are used. It is argued that the uncertainties in the localization of the isocenter within a lesion and the specifications of the size of the target volume do not justify high precision mechanical devices for most radiosurgery treatments.
61 RADIATION PROTECTION AND DOSIMETRY↗
Simple, general, realistic, robust, analytic tokamak equilibria. Part 1. Limiter and divertor tokamaks
Tokamak equilibria have been derived that are analytic solutions to the Grad–Shafranov equation. Here in this paper, Part 1, describes a wide range of such equilibria including smooth limiter surfaces, double- and single-null divertor surfaces, arbitrary aspect ratio, elongation, triangularity and beta. Part 2 generalizes the analysis to include edge pedestals and toroidal flow.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Simple, general, realistic, robust, analytic tokamak equilibria. Part 2. Pedestals and flow
Part 1 described a wide range of analytic tokamak equilibria modelling smooth limiter surfaces, double- and single-null divertor surfaces, arbitrary aspect ratio, elongation, triangularity and beta. Part 2 generalizes the analysis to further include edge pedestals and toroidal flow. Specifically, edge pedestals are allowed in the pressure, pressure gradient and toroidal current density. Also, an edge-localized contribution to the bootstrap current is treated. In terms of flow, analytic solutions are obtained for two cases: a $\gamma = 2$ adiabatic and a $\gamma = \infty $ incompressible energy conservation relation.
Physics↗
Direct, simple and efficient computation of all components of the virtual-casing magnetic field in axisymmetric geometries with Kapur–Rokhlin quadrature
In a recent publication (Toler et al., J. Plasma Phys., vol. 89, issue 2, 2023, p. 905890210), we demonstrated that for axisymmetric geometries, the Kapur–Rokhlin quadrature rule provided an efficient and high-order accurate method for computing the normal component, on the plasma surface, of the magnetic field due to the toroidal current flowing in the plasma, via the virtual-casing principle. The calculation was indirect, as it required the prior computation of the magnetic vector potential from the virtual-casing principle, followed by the computation of its tangential derivative by Fourier differentiation, to obtain the normal component of the magnetic field. Our approach did not provide the other components of the virtual-casing magnetic field. In this letter, we show that a more direct and more general approach is available for the computation of the virtual-casing magnetic field. The Kapur–Rokhlin quadrature rule accurately calculates the principal value integrals in the expression for all the components of the magnetic field on the plasma boundary, and the numerical error converges at a rate nearly as high as the indirect method we presented previously.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
High-energy synchrotron X-ray diffraction measurements of simple bending of pseudoelastic NiTi shape memory alloy wires
Many technological applications of austenitic shape memory alloys (SMAs) involve cyclical mechanical loading and unloading in order to take advantage of pseudoelasticity. In this paper, we investigated the effect of mechanical bending of pseudoelastic NiTi SMA wires using high-energy synchrotron radiation X-ray diffraction (SR-XRD). Differential scanning calorimetry was performed to identify the phase transformation temperatures. Scanning electron microscopy images show that micro-cracks in compressive regions of the wire propagate with increasing bend angle, while tensile regions tend not to exhibit crack propagation. SR-XRD patterns were analyzed to study the phase transformation and investigate micromechanical properties. By observing the various diffraction peaks such as the austenite (200) and the martensite ( ${\bar 1}12$ ), ( ${\bar 1}03$ ), ( ${\bar 1}11$ ), and (101) planes, intensities and residual strain values exhibit strong anisotropy, depending upon whether the sample is in compression or tension during bending.
Zhang, Baozhuo↗
A Simple Preparation Method for Full-Range Electron Tomography of Nanoparticles and Fine Powders
Abstract Electron tomography has become a valuable and widely used tool for studying the three-dimensional nanostructure of materials and biological specimens. However, the incomplete tilt range provided by conventional sample holders limits the fidelity and quantitative interpretability of tomographic images by leaving a “missing wedge” of unknown information in Fourier space. Imaging over a complete range of angles eliminates missing wedge artifacts and dramatically improves tomogram quality. Full-range tomography is usually accomplished using needle-shaped samples milled from bulk material with focused ion beams, but versatile specimen preparation methods for nanoparticles and other fine powders are lacking. In this work, we present a new preparation technique in which powder specimens are supported on carbon nanofibers that extend beyond the end of a tungsten needle. Using this approach, we produced tomograms of platinum fuel cell catalysts and gold-decorated strontium titanate photocatalyst specimens. Without the missing wedge, these tomograms are free from elongation artifacts, supporting straightforward automatic segmentation and quantitative analysis of key materials properties such as void size and connectivity, and surface area and curvature. This approach may be generalized to other samples that can be dispersed in liquids, such as biological structures, creating new opportunities for high-quality electron tomography across disciplines.
Materials Science↗
Identifying University Chemicals That Pose Security Risks: A Simple Qualitative Approach
Various laboratory-focused tools and methodologies for completing a safety risk assessment have been published, yet few similar resources to address chemical security exist. Herein, we describe a chemical security risk assessment case study at a university in a developing country. In this case study, we demonstrate a chemical security risk assessment for a university chemistry department, using an original inventory of 645 entries which was condensed to 295 chemicals after removing duplicates and erroneous entries. We then prioritized to highlight 83 chemicals of interest based on hazardous or dual-use properties that could lead to unacceptable consequences. We further refined to a list of 34 high-risk chemicals that required action, 48 chemicals that may need further justification and consideration for additional protection, and 1 chemical that did not need further consideration for additional protection.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Ferroelectric Particles Generated through a Simple, Room-Temperature Treatment of CdSe Quantum Dots
II–VI quantum dots (QDs) are of keen scientific interest due to their size-dependent optoelectronic properties, which make them viable candidates for a plethora of fields including biomedics, solar power, LEDs, electronic displays, and agriculture. Efforts to improve the effectiveness of QDs for these applications continue through the utilization of ligand exchanges, cation exchanges, and doping. Building upon these efforts and following the literature precedent of Sb-doped CdSe thin films, this paper presents the treatment of colloidal CdSe QDs with SbCl 3 as a synthetic strategy for producing Sb-doped CdSe QDs. Finally, however, rather than self-limited exchange as predicted by the thin film work, a unique two-phase reaction is observed that yields ferroelectric particles.
36 MATERIALS SCIENCE↗
MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures
Metal–organic frameworks (MOFs) are inherently crystalline, brittle porous solids. Conversely, polymers are flexible, malleable, and processable solids that are used for a broad range of commonly used technologies. The stark differences between the nature of MOFs and polymers has motivated efforts to hybridize crystalline MOFs and flexible polymers to produce composites that retain the desired properties of these disparate materials. Importantly, studies have shown that MOFs can be used to influence polymer structure, and polymers can be used to modulate MOF growth and characteristics. In this Review, we highlight the development and recent advances in the synthesis of MOF-polymer mixed-matrix membranes (MMMs) and applications of these MMMs in gas and liquid separations and purifications, including aqueous applications such as dye removal, toxic heavy metal sequestration, and desalination. Other elegant ways of synthesizing MOF-polymer hybrid materials, such as grafting polymers to and from MOFs, polymerization of polymers within MOFs, using polymers to template MOFs, and the bottom-up synthesis of polyMOFs and polyMOPs are also discussed. Furthermore, this review highlights recent papers in the advancement of MOF-polymer hybrid materials, as well as seminal reports that significantly advanced the field.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Integrated Experimental and Modeling Study of Geochemical Reactions of Simple Fracturing Fluids with Caney Shale
Interactions between rock minerals and hydraulic fluids directly impact the geochemical and geomechanical properties of shale formations. However, the mechanisms of geochemical reactions in shale unconventional reservoirs remain poorly understood. Here, to investigate the geochemical reactions between shale and hydraulic fracturing fluids, a series of batch reactor experiments were undertaken. Three rock samples with different mineralogical compositions and three fluid samples of different compositions (deionized water, deionized water + 2% potassium chloride (KCl), and deionized water + 0.5% choline chloride (C 5 H 14 ClNO) were used. Experiments were undertaken at reservoir temperature and atmospheric pressure. Elemental compositions of effluents after 1, 3, 7, 14, 28 days were analyzed using Inductively Couple Plasma Mass Spectrometry (ICP-MS). Medical Computed Tomography (CT) scan and X-ray Fluorescence (XRF) were conducted on the entire core run to help upscale results obtained from rock-fluid interaction experiments. Geochemical modeling using a reactive simulator, TOUGHREACT, was undertaken to corroborate experimental results. Results show that lower pH triggered high dissolution rates in the rock samples, especially the carbonate components. As pH increased, the rate of dissolution declined significantly, though for most cases dissolution still continued. Observed dissolved silica concentrations were much higher than the quartz solubility, suggesting that much of the silica originates from more soluble silica polymorphs and possibly desorption from clay mineral exchange sites. Concentration of most elemental species in solution increased but aluminium and magnesium concentrations declined rapidly following initial entry into solution. Geochemical modeling corroborated the conclusions regarding mineral dissolution and precipitation observed from experiments, notably; the dissolution of calcite and oxidation of pyrite in reacted shale samples, the likely presence of silica polymorphs such as opal, chalcedony or amorphous silica in these samples, and the reduction of Al and Mg concentrations in solution by precipitation of secondary aluminosilicate phases. The de-flocculation of clay minerals during reaction implies fines migration after hydraulic fracturing. This is detrimental to reservoir productivity as clay fines are displaces and lodged within the micro and nano-fractures created during fracturing. The immediate consumption of aluminium and magnesium also has implications on blockage of hydrocarbon pathways due to precipitation of new minerals in these locations.
04 OIL SHALES AND TAR SANDS↗