Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reproducible science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

MHz free electron laser x-ray diffraction and modeling of pulsed laser heated diamond anvil cell

A new diamond anvil cell experimental approach has been implemented at the European x-ray Free Electron Laser, combining pulsed laser heating with MHz x-ray diffraction. In this report we use this setup to determine liquidus temperatures under extreme conditions, based on the determination of time-resolved crystallization. The focus is on a Fe-Si-O ternary system, relevant for planetary cores. This time-resolved diagnostic is complemented by a finite-element model, reproducing temporal temperature profiles measured experimentally using streaked optical pyrometry. This model calculates the temperature and strain fields by including (i) pressure and temperature dependencies of material properties, and (ii) the heat-induced thermal stress, including feedback effect on material parameter variations. Making our model more realistic, these improvements are critical as they give 7000 K temperature differences compared to previous models. Laser intensities are determined by seeking minimal deviation between measured and modeled temperatures. Combining models and streak optical pyrometry data extends temperature determination below detection limit. The presented approach can be used to infer the liquidus temperature by the appearance of SiO 2 diffraction spots. In addition, temperatures obtained by the model agree with crystallization temperatures reported for Fe–Si alloys. Our model reproduces the planetary relevant experimental conditions, providing temperature, pressure, and volume conditions. Those predictions are then used to determine liquidus temperatures at experimental timescales where chemical migration is limited. This synergy of novel time-resolved experiments and finite-element modeling pushes further the interpretation capabilities in diamond anvil cell experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Production of 1,3-Butadiene from Renewable Oxygenated Feedstocks (Abstract)

Reproduce and ascertain additional experimental catalyst performance data for 1-step conversion of oxygenated feedstocks to butadiene. Experimental data will also be obtained for a 2-step processing configuration where we will tailor the PNNL catalyst originally developed for 1-step processing by tailoring the Lewis acidity and metal properties, with a limited number of experiments. We will measure preliminary catalyst performance results for producing Butadiene from the two oxygenated feedstocks. Additionally, we will produce 30 g of butadiene that will be sent to the client for use in producing polybutadiene. Finally, experimental results will inform techno-economic analysis (TEA) modeling. TEA will focus on identifying the most economically favorable processing route to BD from either oxygenated feedstock. We will also project GHG emissions associated with each of the process models being considered for BD production, and compare such results to GHG emissions when produced from conventional methods (e.g., cracking of naphtha) using values from the literature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Controlling matric potential in microfluidics to examine microbial dynamics in unsaturated porous media

The use of microfluidics for the study of soil microbial ecology is an emerging field. Most microfluidic studies of biological systems, however, have been performed under fully saturated conditions that are not representative of natural soil. Therefore, while microfluidics offer many unique capabilities that other methodologies cannot, they are not currently suited to address the effects of matric potential, an important variable defining the microbial moisture niche. Here, a methodology is presented that allows the user to control the aqueous conditions within microfluidic networks by manipulating matric potential using a hanging water column. The method relies on hydrophilic surface treatment of the microfluidic device using polyvinyl alcohol (PVA) and incorporating a bed of small pores at the network boundaries, which serve as a porous ceramic plate analogue (PPA). The method was validated on a simple capillary bundle and then on a more complex pore network. A water retention curve, exhibiting hysteresis, was generated for the pore network over a narrow matric potential range of 0 to – 5 kPa. Both the drainage and wetting curves were reproducible, as were the spatial configuration and the number of fragmented moisture niches in the pore network, particularly on the drainage curve. In contrast, the wetting curve exhibited greater variability in spatial configuration due to the “ink bottle effect,” where capillarity was interrupted by wider pore bodies. Ultimately, the methodology provides realistic pore-scale moisture conditions that can be easily manipulated and maintained, enabling new opportunities to explore soil biophysics and microbial biogeography in unsaturated porous media. As a brief example, images showing the localization of fluorescently tagged Pantoea sp. YR343 at −4.3 kPa are presented, highlighting bacterial distributions in water films and air-water interfaces.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The Brachiopod δ 11 B Record Across the Carboniferous-Permian Climate Transition

In this work, we present the δ 11 B of well-preserved brachiopod fossils coupled with geochemical modeling to examine how seawater boron responded to abrupt and dynamic climate changes in the Late Paleozoic. The Late Carboniferous, a time of major coal formation and glacioeustatic sea level changes, is characterized by relatively stable brachiopod δ11B of 15–17‰, similar to values seen in modern brachiopods. Brachiopod δ 11 B dropped by ~5‰ in the early Permian and then restabilized at a new value of 10‰ within a few million years. Mass balance models of seawater δ 11 B reproduced the overall trends in our brachiopod data but failed to capture the large drop in δ11B in the early Permian. Published seawater 87 Sr/ 86 Sr and δ 44 / 40 Ca data based on brachiopod shells also shift to lower values in the early Permian, suggesting a common control on all three seawater isotope systems. The Permian terrestrial record of evaporites and eolian deposits suggests a prolonged reduced delivery of dissolved weathering products to the ocean, accounting for the change in seawater 87 Sr/ 86 Sr. This reduced weathering, in turn, led to increased atmospheric CO 2 and lowered seawater pH, which may have significantly decreased major removal mechanisms for seawater calcium and boron leading to declines in both isotope systems. We propose that boron removal via coprecipitation in carbonates and adsorption onto clay minerals was significantly diminished due to a reduction in the availability of the borate aqueous species caused by lowered seawater pH.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Electronic structure and energetics of a heterodimeric BChl g ′/Chl a ′ special pair generated by exposure of Heliomicrobium modesticaldum to dioxygen

Heliobacteria are anoxygenic phototrophs that have a Type I homodimeric reaction center containing bacteriochlorophyll g (BChl g). Previous experimental studies have shown that in the presence of light and dioxygen, BChl g is converted into 8 1 -OH-chlorophyll a F (hereafter Chl a F ), with an accompanying loss of light-driven charge separation. These studies suggest that the reaction center only loses the ability to transfer electrons once both BChl g′ molecules of the P 800 special pair have been converted to Chl a F ′. Here, the present work confirms that the partially converted BChl g′/Chl a F ′ special pair remains functional in samples exposed to dioxygen by demonstrating its presence using hyperfine couplings obtained from Q-band 1 H ENDOR, 2D 14 N HYSCORE and DFT methods. The DFT calculations of the BChl g′/BChl g′ homodimeric primary donor, which are based on the recently published X-ray crystal structure, predict that the unpaired electron spin is equally delocalized over both BChl g′ molecules and provide an excellent match to the experimental hyperfine couplings of the anaerobic samples. Exposure to dioxygen leads to substantial changes in the hyperfine interactions, indicative of greater localization of the unpaired electron spin. The measured hyperfine couplings are reproduced in the DFT calculations by replacing one of the BChl g′ molecules of the primary donor with a Chl a F ′ molecule. The calculations reveal that the spin density becomes localized on BChl g′ in the heterodimeric primary donor. Time-dependent DFT calculations demonstrate that conversion of either or both of the accessory BChl g molecules and/or one of the BChl g′ molecules of P800 to Chl a F ′ results in minor effects on the energy of the charge-separated states. In contrast, if both of the BChl g′ molecules of P 800 are converted a large increase in the energy of the charge-separated state occurs. This suggests that the reaction center remains functional when only one half of the dimer is converted, however, conversion of both halves of the P 800 dimer leads to loss of function

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Evaluation of historical precipitation interannual variability in CMIP6 over the United States

Interannual precipitation variability profoundly influences society via its effects on agriculture, water resources, infrastructure, and disaster risks. In this study, we use daily in situ precipitation observations from the global historical climatology network-daily (GHCN-D) to assess the ability of 21 Coupled Model Intercomparison Project Phase 6 (CMIP6) models, including the 50-member fifth-generation Canadian Earth System Model single model initial-condition large ensemble (CanESM5_SMILE), to realistically simulate historical interannual precipitation variability trends within 17 regions of the contiguous United States (CONUS). We assess how accurately the CMIP6 simulations align with observational data across annual, summer, and winter periods, focusing on four key hydrometeorological metrics, including interannual precipitation variability, relative interannual precipitation variability (coefficient of variation), annual mean precipitation, and annual wet day frequency. Our findings reveal that CMIP6 ensemble members generally reproduce the spatial patterns of observed trends in annual mean precipitation. In most regions, models agree well with the signs of observed changes in annual mean precipitation, though discrepancies in trend magnitude are evident. Further, observed trends in winter mean precipitation broadly exhibit a spatial pattern similar to that of the observed annual mean. However, analysis of the CanESM5_SMILE shows that trends in precipitation variability may primarily be the result of model-simulated internal variability, suggesting caution in interpreting multi-model single-realization ensemble results. Challenges in accurately simulating interannual precipitation variability underscore the need for ongoing model refinement and validation to enhance climate projections, especially in regions vulnerable to extreme precipitation events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Development of a Benchmark Eddy Flux Evapotranspiration Dataset for Evaluation of Satellite-Driven Evapotranspiration Models Over the CONUS

A large sample of ground-based evapotranspiration (ET) measurements made in the United States, primarily from eddy covariance systems, were post-processed to produce a benchmark ET dataset. The dataset was produced primarily to support the intercomparison and evaluation of the OpenET satellite-based remote sensing ET (RSET) models and could also be used to evaluate ET data from other models and approaches. OpenET is a web-based service that makes field-delineated and pixel-level ET estimates from well-established RSET models readily available to water managers, agricultural producers, and the public. The benchmark dataset is composed of flux and meteorological data from a variety of providers covering native vegetation and agricultural settings. Flux footprint predictions were developed for each station and included static flux footprints developed based on average wind direction and speed, as well as dynamic hourly footprints that were generated with a physically based model of upwind source area. The two footprint prediction methods were rigorously compared to evaluate their relative spatial coverage. Data from all sources were post-processed in a consistent and reproducible manner including data handling, gap-filling, temporal aggregation, and energy balance closure correction. The resulting dataset included 243,048 daily and 5,284 monthly ET values from 194 stations, with all data falling between 1995 and 2021. We assessed average daily energy imbalance using 172 flux sites with a total of 193,021 days of data, finding that overall turbulent fluxes were understated by about 12% on average relative to available energy. Multiple linear regression analyses indicated that daily average latent energy flux may be typically understated slightly more than sensible heat flux. This dataset was developed to provide a consistent reference to support evaluation of RSET data being developed for a wide range of applications related to water accounting and water resources management at field to watershed scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Flame-retardant cellulose-aerogel composite from agriculture waste for building insulation

Bio-based thermal insulation materials are in high demand due to their availability, reproducibility, and carbon-sequestration nature. However, high flammability, moisture condensation, and high thermal conductivity of biogenic material are major concerns for sustainable building applications. In this study, we report the fire-retardant cellulose aerogel insulation nanocomposites derived from wheat straw and silica aerogel, in which sodium bicarbonate improves its fire retardancy. We combined blended straw fibers and hammermilled straw fibers to create a structural hierarchy composite. The blended straw, with its longer and thicker size, served as reinforcement, while the hammermilled straw fibers acted as filler. This hierarchical structure was further integrated with aerogel for applications in green buildings. The as-prepared materials show a low thermal conductivity of 24.1 mW/m.K, high flexural modulus of 736 MPa, hydrophobicity with a water contact angle of 110.42°, and excellent fire retardancy. Altogether, this work provides an effective method for the synthesis of fire-retardant biogenic thermal insulation materials and shows a promising way for next-generation bio-based insulation materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hydro-mechanical coupled modeling of hydraulic fracturing using the mesh fragmentation technique

The inclusion of special interface elements between standard finite elements is becoming a common technique to model discontinuities in porous media using the finite element method (FEM). Recently, it was proved that high aspect ratio (HAR) elements can reproduce very satisfactorily the main features of behavior observed in a single hydraulically-induced fracture. In this paper, the mesh fragmentation technique (MFT) is proposed to extend the application of HAR elements to simulate more general problems involving the formation of hydraulic fractures in rocks by introducing this type of element in-between the standard FE of a typical mesh. The proposed framework makes use of standard FE techniques. Therefore, it is relatively easy to upgrade an existing FE program for continuous porous media to deal with evolving discontinuities. The proposed approach is verified and validated against available analytical and numerical solutions. The crack patterns predicted by the MFT are also compared with the ones observed in the laboratory. The formation of multiple fractures is also analyzed. In all cases, the proposed technique was able to properly capture the main features of rock behavior subjected to hydraulic fracturing.

58 GEOSCIENCES↗
DOE OSTI2020

Crystallization of TiO 2 polymorphs from RF-sputtered, amorphous thin-film precursors

Crystalline TiO 2 films of anatase, brookite, and rutile are reproducibly made from amorphous precursors deposited by RF magnetron sputtering, producing large-area, single phase films of uniform thickness. Sputtered amorphous TiO 2 precursor thin films follow the general behavior observed for amorphous precursor thin films generated by pulsed laser deposition, namely, that oxygen deficiency is necessary for the formation of brookite and rutile. We quantify the oxygen deficiency and correlate it with the long wavelength optical absorption. We find that the precursor deposition rate is also a contributing factor to phase selection and that brookite and rutile form from films deposited more rapidly and anatase from films deposited more slowly. Sputtered and pulsed laser deposited amorphous precursor films prepared with similar oxygen deficiency and similar thickness result in the same final state after annealing, but the rate for sputtered precursors is slower.

14 SOLAR ENERGY↗
DOE OSTI2024

Physiologically based modeling reveals different risk of respiratory depression after fentanyl overdose between adults and children

Despite a rapid increase in pediatric mortality rate from prescription and illicit opioids, there is limited research on the dose-dependent impact of opioids on respiratory depression in children, the leading cause of opioid-associated death. In this article, we extend a previously developed translational model to cover pediatric populations by incorporating age-dependent pharmacokinetic, pharmacodynamic, and physiological changes compared to adults. Our model reproduced previous perioperative clinical findings that adults and children have similar risk of respiratory depression at the same plasma fentanyl concentration when specific endpoints (minute ventilation, CO 2 tension in the blood) were used. However, our model points to a potential caveat that, in a perioperative setting, routine use of mechanical ventilation and supplemental oxygen maintained the blood and tissue oxygen partial pressures in patients and prevented the use of oxygen-related endpoints to evaluate the consequences of respiratory depression. In a community setting when such oxygenation procedures are not immediately available, our model suggests that the higher oxygen demand and reduced cerebrovascular reactivity could make children more susceptible to severe hypoxemia and brain hypoxia, even with the same plasma fentanyl concentration as adults. Our work indicates that when developing intervention strategies to protect children from opioid overdose in a community setting, these pediatric-specific factors may need to be considered.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Anomalies of global symmetries on the lattice

't Hooft anomalies of global symmetries play a fundamental role in quantum many-body systems and quantum field theory (QFT). In this paper, we make a systematic analysis of lattice anomalies - the analog of 't Hooft anomalies in lattice systems - for which we give a precise definition. Crucially, a lattice anomaly is not a feature of a specific Hamiltonian, but rather is a topological invariant of the symmetry action. The controlled setting of lattice systems allows for a systematic and rigorous treatment of lattice anomalies, shorn of the technical challenges of QFT. We find that lattice anomalies reproduce the expected properties of QFT anomalies in many ways, but also have crucial differences. In particular, lattice anomalies and QFT anomalies are not, contrary to a common expectation, in one-to-one correspondence, and there can be non-trivial anomalies on the lattice that are infrared (IR) trivial: they admit symmetric trivial gapped ground states, and map to trivial QFT anomalies at low energies. Nevertheless, we show that lattice anomalies (including IR-trivial ones) have a number of interesting consequences in their own right, including connections to commuting projector models, phases of many-body localized (MBL) systems, and quantum cellular automata (QCA). We make substantial progress on the classification of lattice anomalies and develop several theoretical tools to characterize their consequences on symmetric Hamiltonians. Our work places symmetries of quantum many-body lattice systems into a unified theoretical framework and may also suggest new perspectives on symmetries in QFT.

Disordered Systems and Neural Networks (cond-mat.d↗
DOE OSTI2021

Process-based and observation-constrained SOA simulations in China: the role of semivolatile and intermediate-volatility organic compounds and OH levels

Organic aerosol (OA) is a major component of tropospheric submicron aerosol that contributes to air pollution and causes adverse effects on human health. Chemical transport models have difficulties in reproducing the variability in OA concentrations in polluted areas, hindering understanding of the OA budget and sources. Herein, we apply both process-based and observation-constrained schemes to simulate OA in GEOS-Chem. Comprehensive data sets of surface OA, OA components, secondary organic aerosol (SOA) precursors, and oxidants were used for model–observation comparisons. The base models generally underestimate the SOA concentrations in China. In the revised schemes, updates were made on the emissions, volatility distributions, and SOA yields of semivolatile and intermediate-volatility organic compounds (SVOCs and IVOCs) and additional nitrous acid sources. With all the model improvements, both the process-based and observation-constrained SOA schemes can reproduce the observed mass concentrations of SOA and show spatial and seasonal consistency with each other. Our best model simulations suggest that anthropogenic SVOCs and IVOCs are the dominant source of SOA, with a contribution of over 50% in most of China, which should be considered for pollution mitigation in the future. The residential sector may be the predominant source of SVOCs and IVOCs in winter, despite large uncertainty remaining in the emissions of IVOCs from the residential sector in northern China. The industry sector is also an important source of IVOCs, especially in summer. More SVOC and IVOC measurements are needed to constrain their emissions. Besides, the results highlight the sensitivity of SOA to hydroxyl radical (OH) levels in winter in polluted environments. The addition of nitrous acid sources can lead to over 30% greater SOA mass concentrations in winter in northern China. It is important to have good OH simulations in air quality models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Plastic scintillators stable for operating in wide ranges of humidity and temperature variations

To provide efficient and reproducible response to nuclear radiation, scintillating plastics should be prepared as materials of high optical transparency and homogeneity that should remain intact during the lifetime of their operation. A problem with traditionally used polyvinyltoluene (PVT) or polystyrene (PS) plastic scintillators arises from their exposure to repeated large temperature swings that cause surface and volume defects, resulting in decreased sensitivity of the detection properties. We find that the problem can be avoided by composition modifications that enable preparation of plastics with properties that are resistant to the continuous variations in environmental conditions. This paper describes improvements in physical properties that can be achieved by the addition of crosslinkers (such as divinylbenzene, DVB) and oxygen-containing compounds or copolymers (e.g. polymethylamethacrylate, PMMA) to the traditional PVT or PS polymer matrices. Results of characterization show that the new materials can be prepared with the scintillation performance equal to that of commercial plastic scintillators, such as EJ-200.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A synthesis of bacterial and archaeal phenotypic trait data

A synthesis of phenotypic and quantitative genomic traits is provided for bacteria and archaea, in the form of a scripted, reproducible workflow that standardizes and merges 26 sources. The resulting unified dataset covers 14 phenotypic traits, 5 quantitative genomic traits, and 4 environmental characteristics for approximately 170,000 strain-level and 15,000 species-aggregated records. It spans all habitats including soils, marine and fresh waters and sediments, host-associated and thermal. Trait data can find use in clarifying major dimensions of ecological strategy variation across species. They can also be used in conjunction with species and abundance sampling to characterize trait mixtures in communities and responses of traits along environmental gradients.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Investigation of the Effect of Framework Flexibility on Adsorption in SIFSIX-3-Cu using a Machine-Learned Force Field

Metal-organic frameworks (MOFs) are a promising class of adsorbents. The performance of MOF sorbents relies on high selectivity and low regeneration energy. This work focuses on the use of machine learned force fields (MLFFs) to model adsorption in a flexible MOF, SIFSIX-3-Cu. A DeePMD-based MLFF was trained to reproduce DFT (PBE+D3) energies, forces, and stresses, using an iterative sampling scheme combining sampling based on molecular dynamics, Monte Carlo, and geometry optimization to capture both attractive and repulsive regions of the potential energy surface. Flexibility of the MOF was explicitly included in this model. Hybrid Monte Carlo/molecular dynamics (MC/MD) simulations using the MLFF predicted adsorption isotherms in good agreement with experimental data for a range of pressures (40 Pa – 104 Pa) in contrast to rigid models, which overpredict CO2 adsorption at low pressures. The improvement was the result of a description of the variability of fluorine-fluorine diagonal distances at adsorption sites. This detailed description of flexibility afforded by the MLFF resulted in more accurate predictions adsorption isotherms when compared to the experimentally measured values. These results underscore the importance of including framework flexibility when modeling adsorption phenomena in MOFs, particularly for low pressure applications and provide a robust procedure for training MLFF models for MOFs.

Atomistic Simulation↗
DOE OSTI2023

On the differences in the vertical distribution of modeled aerosol optical depth over the southeastern Atlantic

Abstract. The southeastern Atlantic is home to an expansive smoke aerosol plume overlying a large cloud deck for approximately a third of the year. The aerosol plume is mainly attributed to the extensive biomass burning activities that occur in southern Africa. Current Earth system models (ESMs) reveal significant differences in their estimates of regional aerosol radiative effects over this region. Such large differences partially stem from uncertainties in the vertical distribution of aerosols in the troposphere. These uncertainties translate into different aerosol optical depths (AODs) in the planetary boundary layer (PBL) and the free troposphere (FT). This study examines differences of AOD fraction in the FT and AOD differences among ESMs (WRF-CAM5, WRF-FINN, GEOS-Chem, EAM-E3SM, ALADIN, GEOS-FP, and MERRA-2) and aircraft-based measurements from the NASA ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) field campaign. Models frequently define the PBL as the well-mixed surface-based layer, but this definition misses the upper parts of decoupled PBLs, in which most low-level clouds occur. To account for the presence of decoupled boundary layers in the models, the height of maximum vertical gradient of specific humidity profiles from each model is used to define PBL heights. Results indicate that the monthly mean contribution of AOD in the FT to the total-column AOD ranges from 44 % to 74 % in September 2016 and from 54 % to 71 % in August 2017 within the region bounded by 25∘ S–0∘ N–S and 15∘ W–15∘ E (excluding land) among the ESMs. ALADIN and GEOS-Chem show similar aerosol plume patterns to a derived above-cloud aerosol product from the Moderate Resolution Imaging Spectroradiometer (MODIS) during September 2016, but none of the models show a similar above-cloud plume pattern to MODIS in August 2017. Using the second-generation High Spectral Resolution Lidar (HSRL-2) to derive an aircraft-based constraint on the AOD and the fractional AOD, we found that WRF-CAM5 produces 40 % less AOD than those from the HSRL-2 measurements, but it performs well at separating AOD fraction between the FT and the PBL. AOD fractions in the FT for GEOS-Chem and EAM-E3SM are, respectively, 10 % and 15 % lower than the AOD fractions from the HSRL-2. Their similar mean AODs reflect a cancellation of high and low AOD biases. Compared with aircraft-based observations, GEOS-FP, MERRA-2, and ALADIN produce 24 %–36 % less AOD and tend to misplace more aerosols in the PBL. The models generally underestimate AODs for measured AODs that are above 0.8, indicating their limitations at reproducing high AODs. The differences in the absolute AOD, FT AOD, and the vertical apportioning of AOD in different models highlight the need to continue improving the accuracy of modeled AOD distributions. These differences affect the sign and magnitude of the net aerosol radiative forcing, especially when aerosols are in contact with clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Advancing Photo(Electro)Chemical Water Splitting: The Promise of Atomically Dispersed Single‐, Dual‐, and Alloy‐Site Catalysts

Single-atom catalysts (SACs) have rapidly gained prominence as an emerging class of electrocatalysts for water splitting, owing to their uniform and precisely defined active sites. By maintaining uniform reaction pathways, SACs minimize the formation of unwanted byproducts, thus exhibiting extremely high selectivity and atomic efficiency. A key determinant of SAC performance lies in the interfacial interaction between the isolated metal atoms and the supporting material under strong metal–support coordination, which is vital for maintaining long-term activity. However, despite these benefits, reproducibly synthesizing SACs with high metal loadings while retaining uniform dispersion remains a significant challenge. To address the intrinsic challenges of SACs, recent research has expanded into dual-atom catalysts (DACs) and single-atom alloy catalysts (SAACs), providing synergistic active sites and combining the benefits of SACs with bimetallic systems. Furthermore, this review systematically explores the latest advancements in synthesis methods and innovations for SACs for electrochemical water splitting. Additionally, it examines the evolution of catalyst design, emphasizing the unique structural and electronic characteristics of single-site, dual-site, and alloyed SAC systems and highlighting their critical roles in accelerating water-splitting reaction kinetics as well as the prevailing challenges and outlining promising directions for advancing hydrogen production via water electrolysis.

08 HYDROGEN↗