Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “relevancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Theoretical Modeling of Reactor Relevant Conditions for Plasma Jet Driven Magneto-Inertial Fusion

The Charger Advanced Power and Propulsion Laboratory (CAPP), a laboratory within the Propulsion Research Center (PRC) at the University of Alabama in Huntsville (UAH) is working with Los Alamos National Laboratory (LANL). to develop models and inform on promising paths for high gain magneto-inertial fusion (MIF) conditions. This report provides a framework for identifying promising conditions for achieving ignition in plasma-jet-driven magneto-inertial fusion (PJMIF)[1]. As proposed, for the first part of the contract, UAH proposes to develop a gain over unity set of stagnation conditions to provide a state of plasma conditions to achieve to set long terms goals for the PJMIF program. Specifically, UAH will model PJMIF stagnation conditions to include radiation, heat transfer, two temperature energy equations, fusion reactivity and nonlocal fusion product deposition, but no hydrodynamics for these purposes. These calculations will use a stationary plasma model to reduce simulation complexity—focusing on a DT target at 10 keV. Subsequent work will include a DD plasma layer acting as an afterburner. UAH will assume an initial magnetic field without any consideration of the topology, just assume a field strength, most likely scaled with consideration of the local hall parameter. This effort will inform the team on the tradeoff between mass, peak target field, etc and the achievable gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strontium Speciation in Relevant Tank Waste Components Examined by Electrospray Ionization Mass Spectrometry

The identification of chemical species formed in complex nuclear waste is crucial for the development and employment of advanced separations technologies to remediate the Hanford site by processing tank waste. The current Tank Side Cesium Removal (TSCR) process deployed at Hanford utilizes crystalline silicotitanate (CST) ion exchange (IX) media to aid in the separation of low-activity waste for proper treatment and disposal. The inorganic IX media is highly selective for Cs but has been shown to also remove Sr from caustic simulants and small-scale IX processing of Hanford tank waste.(Fiskum, Rovira et al. 2019, Fiskum, Campbell et al. 2021, Westesen, Campbell et al. 2022) Quantitative Sr removal has not been observed in all tank waste supernates tested; thus, to better understand Sr removal and effectively predict processing behavior through TSCR, it is necessary to first investigate Sr speciation in tank waste. This work utilized electrospray ionization mass spectrometry (ESI-MS) to identify ionic Sr complexes that form in the presence of NO 3 –, NO 2 –, OH–, and Cl–. Although our results show that NO 3 –, NO 2 –, and OH– are competitive for Sr 2+ binding, previous data from IX studies indicate that [SrOH] + is not the dominant species of concern in tank waste processing schemes.(Fiskum, Campbell and Trang-Le 2020) Our results show that the [Sr(NO3)]+ species and the [Sr(NO2)] + species form in considerable abundances, which may affect the ability to separate Sr using CST in nuclear waste separation processes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Laser Powder Bed Fusion Manufactured Alloys 625 and 282 and Properties Relevant to Advanced Nuclear Components

Under the Advanced Materials and Manufacturing Technologies program, two Ni-based alloys fabricated by laser powder bed fusion (LPBF) have been evaluated: γ′-strengthened Haynes 282 and solution-strengthened Inconel 625. Large printing defects were observed in the LPBF 282 alloy fabricated using a Renishaw AM250 machine, likely due to particle spattering during printing. Annealing at 1,180°C for 1 h followed by 4 h at 800°C in a high density of 50 nm γ′-strengthening precipitates as well as partial recrystallization resulted in a bimodal grain distribution. Creep testing performed at 750°C revealed lower creep life and ductility for the LPBF 282 compared with wrought 282. X-ray computed tomography combined with optical and scanning electron microscopy microstructural characterization revealed crack formation during creep testing, initiated either from printing defects or from creep cavitation at grain boundaries. Printing defects were the likely reason for the lower creep performance of LPBF 282 and could be suppressed by optimizing the build configuration. Printing 625 on an EOS M290 machine using the recommended EOS parameters resulted in a very low defect density. Superior creep strength at 725°C was observed for the as-printed LPBF 625 along the build direction when compared with wrought 625. No defect larger than ~50 µm could be detected by X-ray computed tomography in the as-printed conditions and after creep testing for 1,000 h at 725°C and 150 MPa. Small, needle-like δ-phase precipitates were observed after creep testing for 100 h at 725°C and 200 MPa. The rapid formation of the γ phase is directly related to the initial Nb and Mo segregation in the LPBF 625 cell walls, and its effect on the alloy’s high-temperature performance will be evaluated. Solution annealing was carried out at 1,150°C for 1 h and led to full recrystallization of the alloy. A decrease in strength and increase in ductility were observed after solution annealing, and the alloy recrystallization resulted in isotropic tensile properties at room temperature, contrary to what was observed for the as-printed LPBF 625.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

TEM Specimen Manufacturing to Support Analysis of IASCC Mechanisms in Irradiated Austenitic Steels – Light-Water– Relevant Materials

The present report describes the manufacturing of samples for advanced microstructure studies of mechanisms of irradiation-assisted stress corrosion cracking (IASCC) in the materials of light-water reactor (LWR) internal components. The samples were manufactured via FIB (focused ion beam milling) from 4-point-bend specimens subjected to oxidation and mechanical loading in a simulated LWR environment (primary water, PW). The corrosion tests were conducted at the University of Michigan (UM), and the tested specimens were transported to ORNL to perform FIB work. Finally, the manufactured FIB specimens were shipped back to the UM for microstructure characterization. Section 1 in the report provides a brief introduction; Section 2 describes materials, their in-service and irradiation history, and the geometry of specimens for IASCC testing. Section 3 documents typical work steps (specimen mapping) and reports the number of manufactured FIB objects. Section 4 briefly describes the preliminary results of microstructure analysis performed at the University of Michigan and highlights the key findings. The summary and conclusions section discusses future possible future steps and generalizes the obtained results, their unique character, and their importance for the nuclear industry.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Aviation Fuel Characterization at Operationally Relevant Conditions

To accelerate approval and potentially expand the allowable property range for aviation fuels, we are using high performance computing simulations to reveal fuel property effects on aviation combustor performance. These simulations are supported by fuel property measurements over temperatures and pressures that the fuel experiences in an aircraft engine and by validated chemical kinetics models for SAF combustion. Here we report density, viscosity, and surface tension results for conventional jet fuel and multiple synthetic fuels from -30 degrees Celsius to 200 degrees Celsius (-40 degrees Celsius for viscosity) and 1 atm to 70 atm including an assessment of method repeatability. Properties of surrogate mixtures are also investigated. Distillation, ICN, LHV, flashpoint, and Cp are also reported, and data are being used to develop models to predict fuel properties from composition (GCxGC).

33 ADVANCED PROPULSION SYSTEMS↗

Applied genomics for industrially relevant microalgal strain development & optimization: characterizing genotype-phenotype relationships towards scalable environment-enhancing energy systems

Multiple planetary boundaries considered a safe operating space for humanity have been exceeded in recent years, with twice as many boundaries transgressed in 2023 as in 2009. Bioenergy systems are unique in that they can interact with and improve many of the transgressed boundaries directly, including multiple geochemical cycles, water and land use, and climate change. Among bioenergy systems, microalgae-based environment enhancing energy (E 2 -energy) are promising bioenergy systems for drop-in biofuels, valuable materials, chemicals and therapeutics, while making deep emission cuts and remediating wastewater, all without competing for agricultural resources.

09 BIOMASS FUELS↗

Final Technical Report - Center for Simulation of Fusion Relevant RF Actuators

We have developed a suite of 3D electromagnetic field solvers, both FEM and FDTD based, that account for the RF antenna and vacuum vessel geometries with unprecedented accuracy. Workflows were developed that make it possible to translate CAD models for the antenna and vacuum vessel to physics meshes for RF wave simulation. Nonlinear RF sheath formation has been incorporated self-consistently as a boundary condition in these solvers. We have also carried out extensive studies of the impact of RF sheaths on the ion energy angle distribution at plasma-material interfaces, using high fidelity particle-in-cell codes. Comprehensive simulation models were developed to assess the impact of blob-like edge turbulence on RF wave propagation and the impact of the RF ponderomotive force on the plasma scrape-off layer (SOL). A fluid transport solver for the far-SOL was also developed which accounts for the high parallel to perpendicular heat anisotropy on an unstructured mesh, thus making it possible to precisely represent an antenna structure in the presence of edge transport. Finally we have developed a hierarchy of core wave propagation and absorption models that self-consistently combine continuum Fokker Planck and Monte Carlo treatments of fast ion evolution with ICRF full-wave field solvers and continuum Fokker Planck treatments of fast electron evolution with both full-wave and ray tracing models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗