SEARCH · Engineering Papers

Results for “reflectivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Influence of process parameter variation on the reflectivity of sputter-deposited W-C multilayer diffraction gratings

Multilayer W-C diffraction gratings with nominal d spacings of 35 A have been fabricated by magnetron sputter deposition. The peak and integrated reflectivities of these films have been measured with Al K-alpha X-rays and compared to theoretical values. The rms surface roughness has been evaluated. The influence of several sputtering-system process parameters on the reflectivities has been investigated.

Sager, B.↗

NASA NTRS1987

Surface bidirectional reflectance properties of two southwestern Arizona deserts for wavelengths between 0.4 and 2.2 micrometers

Surface bidirectional reflectance characteristics are presented for the Sonora Desert and the Mohawk Valley at solar zenith angles of 13, 31, and 57 degs at wavelengths between 0.4 and 1.6 microns. Nadir reflectance values are presented for wavelengths between 0.4 and 2.2 microns for solar zenith angles of 13, 17.5, 27, 31, 45, 57, and 62 degs. Data were taken from a helicopter during May l985 in support of an Earth Radiation Budget Experiment (ERBE), a Stratospheric Aerosol Gas Experiment (SAGE II), and an Advanced Very High Resolution Radiometer (AVHRR) satellite validation experiment.

Whitlock, Charles H.↗

NASA NTRS1987

Reflectance spectra of mafic silicates and phyllosilicates from .6 to 4.6 microns

The results of spectral measurements for mafic silicates are given. The study provided valuable spectral reflectance information about mafic silicates and phyllosilicates in the 2.5 to 4.6 micron wavelength region. It was shown that the reflectance of these materials is strongly affected by the presence of H2O and OH. Therefore, the identification of these absorbing species is greatly enhanced.

Roush, Ted L.↗

NASA NTRS1986

Gaussian analysis of temperature effects on the reflectance spectra of mafic minerals in the 1-micron region

Gaussian band-fitting analysis has been applied to the reflectance spectra of mafic silicates, which are of geologic importance throughout much of the solar system. Reflectance spectra obtained over a sample temperature range of about 80 to 448 K of olivine, clinopyroxene, and orthopyroxene were used in order to characterize the spectral changes in the 1-micron wavelength region of these minerals as a function of temperature. Four Gaussians are required to characterize the olivine, while two Gaussians are necessary to characterize both the orthopyroxene. The trends of the individual Gaussian parameters (integrated area, width, and center position) are presented as a function of temperature for each mineral. The characterization by Gaussian analysis of the 1-micron absorption feature of all minerals yields consistent trends in center position, integrated area, and width that may prove useful in quantitative determination of these minerals in mineral mixtures.

Roush, T. L.↗

NASA NTRS1986

Estimation of canopy parameters for inhomogeneous vegetation canopies from reflectance data. II - Estimation of leaf area index and percentage of ground cover for row canopies

The canopy reflectance (CR) model for row-planted vegetation proposed earlier has been tested for soybean canopies in three different stages of growth and for corn canopies at early and full growth stages. The model fits the field-measured bidirectional CR data quite well. It is shown that, by inverting this model, one could estimate the leaf area index as well as the percentage of ground cover quite accurately from measured canopy reflectances.

Goel, N. S.↗

NASA NTRS1986

Calibrations of phase abundance, composition, and particle size distribution for olivine-orthopyroxene mixtures from reflectance spectra

An analytical method for quantifying the characteristics (phase abundances, phase composition, and grain size) of an olivine-orthopyroxene mixture from reflectance spectra is described. The spectral parameters related to reflectance, wavelength position, and albedo are investigated; the absorption bands for the olivine-orthopyroxene mixture is also studied. Primary calibrations useful for the determination of the olivine-orthopyroxene mixture characteristics are examined.

Cloutis, Edward A.↗

NASA NTRS1987

Application of the complex cepstrum to the location of acoustic sources near reflective surfaces

The complex cepstrum is used to correct bearing estimations of acoustic sources in the presence of a reflective surface. An automated liftering procedure is used which zeros out a block portion of the cepstrum including the echo information. The problem of the resulting distortion is alleviated by applying a coherence criterion to the recovered direct signals at each microphone. Thus to a large degree the interactive nature of cepstral processing is overcome for this application. For the test signals and geometries considered the cepstrum is shown to accurately correct for bearing errors in acoustic signals contaminated with reflections from nearby surfaces.

Fuller, C. R.↗

NASA NTRS1987

IRAS surface brightness maps of reflection nebulae in the Pleiades

Surface brightness maps at 12, 25, 60, and 100 microns were made of a 2.5 deg x 2.5 deg area of the reflection nebulae in the Pleiades by coadding IRAS scans of this region. Emission is seen surrounding 17 Tau, 20 Tau, 23 Tau, and 25 Tau in all four bands, coextensive with the visible reflection nebulosity, and extending as far as 30 arcminutes from the illuminating stars. The infrared energy distributions of the nebulae peak in the 100 micron band, but up to 40 percent of the total infrared power lies in the 12 and 25 micron bands. The brightness of the 12 and 25 micron emission and the absence of temperature gradients at these wavelengths are inconsistent with the predictions of equilibrium thermal emission models. The emission at these wavelengths appears to be the result of micron nonequilibrium emission from very small grains, or from molecules consisting of 10-100 carbon atoms, which have been excited by ultraviolet radiation from the illuminating stars.

Castelaz, Michael W.↗

NASA NTRS1987

The discovery of an infrared reflection nebula surrounding R Coronae Australis IRS 5

The infrared source R CrA IRS 5 in the R CrA dark cloud has been mapped, and it is found that it is extended at H (1.6 micron) and at K (2.2 micron). The geometry of the data suggest that this object consists of a disk and polar reflection lobe surrounding a star, similar to GSS 30 in the Ophiuchus dark cloud and to SGS 1 in the NGC 1333 dark cloud. The illuminating star has an effective temperature below 8000 K, a luminosity less than 9 solar luminosities, and lies above the main sequence. The luminosity of this star is smaller than the luminosity of any other known star which illuminates an infrared reflection nebula.

Castelaz, Michael W.↗

NASA NTRS1987

Rapid variability of the R Coronae Australis reflection nebula NGC 6729

Measurable changes in the surface brightness of the reflection nebula associated with R CrA occur over intervals as short as 24 hours. These and other more extreme variations are demonstrated with CCD images obtained over a 23-day period March 10 to April 2, 1984. During this time span R CrA brightened by 1.3 mag. The alterations in the appearance of the nebula NGC 6729 are apparently caused by the shadowing effects of clouds which are very close to the star, probably well within 1 Au. The spectrum of R CrA may itself vary slightly from night to night, and these changes are echoed by the surrounding nebula with an observable time delay. A photograph showing the complicated filamentary structure in NGC 6729 is reproduced and the relation between the reflection nebula and its illuminating star is discussed.

Graham, J. A.↗

NASA NTRS1987

Possible temperature variation effects on the interpretation of spatially resolved reflectance observations of asteroid surfaces

In virtue of the extent to which the visible and near-IR spectral reflectance of minerals that may be encountered on asteroid surfaces is a function of temperature, surface temperature distributions must be taken into account in the mineralogical evaluation of spectral reflectance data obtained from a spatially resolved asteroid surface. Possible errors of this type are presently illustrated for the case of a silicate mineral assemblage measured at the various temperatures that may be encountered over an asteroid surface, in order to allow optimal mineralogical data extraction.

Roush, Ted L.↗

NASA NTRS1987

The quality of geological information derivable from high resolution reflectance spectra - Results for mafic silicates

High-resolution visible and near-infrared diffuse reflectance spectra of mafic silicates can be deconvolved to yield quantitative information concerning mineral mixture properties, and the results can be directly applied to remotely sensed data. Spectral reflectance measurements of laboratory mixtures of olivine, orthophyroxene, and clinopyroxene with known chemistries, phase abundances, and particle size distributions have been utilized to develop correlations between spectral properties and the physicochemical parameters of the samples. A large number of mafic silicate spectra were measured and examined for systematic variations in spectral properties as a function of chemistry, phase abundance, and particle size. Three classes of spectral parameters (ratioed, absolute, and wavelength) were examined for any correlations. Each class is sensitive to particular mafic silicate properties. Spectral deconvolution techniques have been developed for quantifying, with varying degrees of accuracy, the assemblage properties (chemistry, phase abundance, and particle size).

Cloutis, E. A.↗

NASA NTRS1987

Measurement of leaf relative water content by infrared reflectance

From basic considerations and Beer's law, a leaf water content index incorporating reflectances of wavelengths from 0.76 to 0.90 microns and from 1.55 to 1.75 microns was developed that relates leaf reflectance to leaf relative water content. For the leaf succulent, Agave deserti, the leaf water content index was not significantly different from the relative water content for either individual leaves or an entire plant. Also, the relative water contents of intact plants of Encelia farinosa and Hilaria rigida in the field were estimated by the leaf water content index; variations in the proportion of living to dead leaf area could cause large errors in the estimate of relative water content. Thus, the leaf water content index may be able to estimate average relative water content of canopies when TM4 and TM5 are measured at a known relative water content and fraction of dead leaf material.

Hunt, E. Raymond, Jr.↗

NASA NTRS1987

AIS-2 radiometry and a comparison of methods for the recovery of ground reflectance

A field experiment and its results involving Airborne Imaging Spectrometer-2 data are described. The radiometry and spectral calibration of the instrument are critically examined in light of laboratory and field measurements. Three methods of compensating for the atmosphere in the search for ground reflectance are compared. It was found that laboratory determined responsitivities are 30 to 50 percent less than expected for conditions of the flight for both short and long wavelength observations. The combined system atmosphere surface signal to noise ratio, as indexed by the mean response divided by the standard deviation for selected areas, lies between 40 and 110, depending upon how scene averages are taken, and is 30 percent less for flight conditions than for laboratory. Atmospheric and surface variations may contribute to this difference. It is not possible to isolate instrument performance from the present data. As for methods of data reduction, the so-called scene average or log-residual method fails to recover any feature present in the surface reflectance, probably because of the extreme homogeneity of the scene.

Conel, James E.↗

NASA NTRS1987

Measuring near infrared spectral reflectance changes from water stressed conifer stands with AIS-2

Airborne Imaging Spectrometer-2 (AIS-2) data was acquired over two paired conifer stands for the purpose of detecting differences in spectral reflectance between stressed and natural canopies. Water stress was induced in a stand of Norway spruce and white pine by severing the sapwood near the ground. Water stress during the AIS flights was evaluated through shoot water potential and relative water content measurements. Preliminary analysis with raw AIS-2 data using SPAM indicates that there were small, inconsistent differences in absolute spectral reflectance in the near infrared 0.97 to 1.3 micron between the stressed and natural canopies.

Riggs, George↗

NASA NTRS1987

The carbon dioxide chaperon efficiency for the reaction H + O2 + M yields HO2 + M from ignition delay times behind reflected shock waves

Ignition delay times for stoichiometric hydrogen-oxygen in argon with and without carbon dioxide were measured behind reflected shock waves. A 20-reaction kinetic mechanism models the measured hydrogen-oxygen delay times over the temperature range 950 to 1300 K. The chaperon efficiency for carbon dioxide determined for the hydrogen-oxygen carbon dioxide mixture was 7.0. This value is in agreement with literature values but much less than a recent value obtained from flow tube experiments. Delay times measured behind a reflected shock wave were about 20% longer than those measured behind incident shock waves. The kinetic mechanism successfully modeled the high-pressure data of Skinner and the hydrogen-air data of Stack. It is suggested that the lowest temperature points for the hydrogen-air data of Slack are unreliable and that the 0.27-atm data may illustrate a case where vibrational relaxation of nitrogen is important. The reaction pathway HO2 yields H2O2 yields OH yields H was required to model the high-pressure data of Skinner. The successful modeling of the stoichiometric hydrogen-air data demonstrates the appropriateness of deriving kinetic models from data for gas mixtures highly diluted with argon. The technique of reducing a detailed kinetic mechanism to only the important reactions for a limited range of experimental data may render the mechanism useless for other test conditions.

Brabbs, Theodore A.↗

NASA NTRS1988

Measuring and modeling near surface reflected and emitted radiation fluxes at the FIFE site

Research was conducted during the four Intensive Field Campaigns (IFC) of the FIFE project in 1987. The research was done on a tall grass prairie with specific measurement sites on and near the Konza Prairie in Kansas. Measurements were made to help meet the following objectives: determination of the variability in reflected and emitted radiation fluxes in selected spectral wavebands as a function of topography and vegetative community; development of techniques to account for slope and sun angle effects on the radiation fluxes; estimation of shortwave albedo and net radiation fluxes using the reflected and emitted spectral measurements described; estimation of leaf and canopy spectral properties from calculated normalized differences coupled with off-nadir measurements using inversion techniques; estimation of plant water status at several locations with indices utilizing plant temperature and other environmental parameters; and determination of relationships between estimated plant water status and measured soil water content. Results are discussed.

Blad, Blaine L.↗

NASA NTRS1988

The effect of the near earth micrometeoroid environment on a highly reflective mirror surface

A resurgence of interest in placing large solar concentrator solar dynamic systems in space for power generation has brought up again a concern for maintaining the integrity of the optical properties of highly specular reflecting surfaces in the near earth space environment. One of the environmental hazards needing evaluation is the micrometeoroid environment. It has been shown that highly reflective polished metals and thin film coatings degrade when exposed to simulated micrometeoroids in the lab. At NASA-Lewis, a shock tube was used to simulate the phenomenon of micrometeoroid impact by accelerating micron sized particles to hypervelocities. Any changes in the optical properties of surfaces exposed to this impact were then evaluated. The degradation of optical properties of polished metals and thin metallic films after exposure to simulated micrometeoroids was determined as a function of impacting kinetic energy area of the particles. A calibrated sensor was developed to not only detect the micrometeoroid environment, but also to evaluate the degradation of the optical properties of thin aluminum films in space. Results of the simulation are presented and discussed.

Mirtich, Michael J.↗