Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “overlapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

On the origin of planetary spins

We examine the rate of accretion of mass and spin angular momentum by a spherical solid body ('planet') immersed in a differentially rotating disk of particles ('planetesimals'). If the planet travels on a circular orbit, the accretion process is described by two dimensionless parameters r and s, which measure the ratio of the planet's radius to its Hill radius and the ratio of the rms radial velocity of the planetesimals to the shear across the Hill radius, respectively. Using a combination of analytic arguments and numerical simulations, we derive the mass and angular momentum accretion rates and their scaling with r and s. By introducing an additional parameter, the effective mass of the planetesimals relative to the planet, we can derive the obliquities and spins arising from the stochastic nature of the accretion process. Our results are consistent with those of previous calculations by Lissauer and Kary (1991) wherever there is overlap in parameter space. In particular, we conclude that ordered accretion from a uniform or slowly varying disk of small bodies cannot result in rotation as rapid as that of earth or Mars for any value of the disk velocity dispersion s. The spin rates of these planets are most naturally explained as arising from one or a few 'giant' impacts by planetesimals.

Dones, Luke↗

Production of H-3 at large momentum in alpha-(C-12) collisions at 2A GeV

Calculations of the longitudinal and transverse momentum distributions for H-3 production at large momentum in alpha-(C-12) collisions near 2A GeV are compared to experiment. Triton exchange and final-state interactions are shown to represent large corrections to the impulse approximation for proton knockout. A method for calculating interference effects for inelastic fragmentation is discussed. Good agreement with experiment using a phenomenological overlap function for (H-3)-p is found successful in describing H-3 production in pion-induced reactions. Comparisons to momentum distributions obtained through (p, 2p) and (e, ep) reactions on He-4 are made.

Cucinotta, Francis A.↗

Whistlers and plasmaspheric hiss - Wave directions and three-dimensional propagation

Wave propagation directions are determined on the basis of wave data from the DE 1 satellite showing simultaneously nonducted whistlers and hiss. Hiss wave normal angles are determined as about 70 and 77 deg for f = 3.5 and 2.5 kHz, respectively, with the wave vector being almost perpendicular to the meridional plane. A novel approximate analytical formulation of 3D propagation of whistler waves is developed and used to model the drift of magnetospherically reflected whistlers in azimuth. It is shown that depending on initial parameters, the time of arrival of whistler rays at a fixed observation point can differ by 10-20 s, with signals from different magnetospherically reflected whistlers overlapping to evolve into a hisslike signal. The total azimuthal drift of whistler rays is found to not exceed about 30 deg, so that plasmaspheric hiss may be produced by nonducted whistlers at longitudes correlated with the location of thunderstorm activity.

Draganov, A. B.↗

Role of a microbore capillary column in the development of a portable gas chromatograph-mass spectrometer

An approach to the development of a high-performance, field portable gas chromatograph-mass spectrometer is presented which is based on a combination of a short microbore capillary column and a miniaturized, light-weight focal plane mass spectrograph. Performance results of the short microbore column for the mixture separation of the major pollutants and data on time-resolved mass spectral measurements of overlapped gas chromatograph peaks are reported.

Sinha, Mahadeva P.↗

Effects of bleed-hole geometry and plenum pressure on three-dimensional shock-wave/boundary-layer/bleed interactions

A numerical study was performed to investigate 3D shock-wave/boundary-layer interactions on a flat plate with bleed through one or more circular holes that vent into a plenum. This study was focused on how bleed-hole geometry and pressure ratio across bleed holes affect the bleed rate and the physics of the flow in the vicinity of the holes. The aspects of the bleed-hole geometry investigated include angle of bleed hole and the number of bleed holes. The plenum/freestream pressure ratios investigated range from 0.3 to 1.7. This study is based on the ensemble-averaged, 'full compressible' Navier-Stokes (N-S) equations closed by the Baldwin-Lomax algebraic turbulence model. Solutions to the ensemble-averaged N-S equations were obtained by an implicit finite-volume method using the partially-split, two-factored algorithm of Steger on an overlapping Chimera grid.

Chyu, Wei J.↗

Kinematic domain decomposition for boundary-motion-induced flow simulations

A method is developed to solve the unsteady Navier-Stokes equations on a composite grid, which consists of subdomain grids moving with respect to each other. These subdomains are structured grids with different topologies. This method eliminates assuming the moving components to be instantaneously stationary, where deciding on the particular frozen instants is difficult and affects the solution adversely. Moreover, this method captures the boundary-motion-induced flow component. The method is demonstrated through a transonic flow past an airfoil, which experiences a combined motion of pitching and plunging. An O-grid around the airfoil is overlapped on a fine Cartesian grid, which is zonally embedded in a coarse Cartesian grid. The coarse grid is stationary but the other two grids are plunging. Only the O-grid is also sinusoidally pitching. The results are compared successfully with the experimental data.

Baysal, Oktay↗

A zonal CFD method for three-dimensional wing simulations

The primary objective of this work is to demonstrate the feasibility of a 3D potential/viscous flow coupling procedure for reducing computational effort while maintaining solution accuracy. The closed-loop, overlapped, velocity-coupling concept has been developed in a new code, ZAP3D, that couples a potential flow panel code with a Navier-Stokes method. The current ZAP3D calculation for an aspect ratio 5 wing with an outer domain radius of about 1.2 chords represents a speed-up in CPU time over the ARC3D large domain calculation by about a factor of 2.5. This improvement is achieved for less than a 0.5 percent deviation in C(L), 10 counts change in C(D), and 0.0015 variation in C(My). Additional reductions in the required computational domain for ZAP3D are expected as the method is further developed and refined.

Summa, J. M.↗

Preliminary results from the ASF/GPS ice classification algorithm

The European Space Agency Remote Sensing Satellite (ERS-1) satellite carried a C-band synthetic aperture radar (SAR) to study the earth's polar regions. The radar returns from sea ice can be used to infer properties of ice, including ice type. An algorithm has been developed for the Alaska SAR facility (ASF)/Geophysical Processor System (GPS) to infer ice type from the SAR observations over sea ice and open water. The algorithm utilizes look-up tables containing expected backscatter values from various ice types. An analysis has been made of two overlapping strips with 14 SAR images. The backscatter values of specific ice regions were sampled to study the backscatter characteristics of the ice in time and space. Results show both stability of the backscatter values in time and a good separation of multiyear and first-year ice signals, verifying the approach used in the classification algorithm.

Cunningham, G.↗

A computational and experimental investigation of a delta wing with vertical tails

The flow over an aspect ratio 1 delta wing with twin vertical tails is studied in a combined computational and experimental investigation. This research is conducted in an effort to understand the vortex and fin interaction process. The computational algorithm used solves both the thin-layer Navier-Stokes and the inviscid Euler equations and utilizes a chimera grid-overlapping technique. The results are compared with data obtained from a detailed experimental investigation. The laminar case presented is for an angle of attack of 20 deg and a Reynolds number of 500,000. Good agreement is observed for the physics of the flow field, as evidenced by comparisons of computational pressure contours with experimental flow-visualization images, as well as by comparisons of vortex-core trajectories. While comparisons of the vorticity magnitudes indicate that the computations underpredict the magnitude in the wing primary-vortex-core region, grid embedding improves the computational prediction.

Krist, Sherrie L.↗

The processing of the Viking Orbiter range data and its contribution to Mars gravity solutions

The processing of Doppler data has been the primary method for deriving models of the Mars gravity field. Since the Mariner 9 and Viking spacecraft were placed in orbit about Mars, many models from degree and order 6 to degree and order 50 have been developed. However, during the Viking mission, some 26,000 range measurements to the two Viking Orbiters were also obtained. These data have not previously been used in the derivation of Mars gravity models. A portion of these range data have been processed simultaneously with the Doppler data. Normal equations were generated for both sets of data and were used to create two solutions complete to degree and order 30: a nominal solution including both the range and the Doppler data (MGM-R100), and another solution including only the Doppler data (MGM-R101). Tests with the covariances of these solutions, as well as with orbit overlap tests indicate that the interplanetary range data can be used to improve the modeling of the Mars gravity field.

Lemoine, Frank G.↗

Considerations on formation flying separations for earth observing satellite missions

We assume that scientific requirements (or other mission requirements) call for simultaneous observations from sensors located on different formation-flying spacecraft, and assess how well various kinds of formations of two and three spacecraft can meet these simultaneity requirements. We simulate two types of formation, one where the slave spacecraft moves with respect to the reference spacecraft, and the other where the two spacecraft are kept at a constant time separation. For each type of formation we consider two attitudes: a perfect local vertical local horizontal (LVLH) and an attitude which represents the maximum allowable mission tolerance offset from the mission requirements for attitude determination. We simulate formations of multiple spacecraft and determine how well they can perform simultaneous observations. For each spacecraft we compute the instantaneous ground projection of the center of the imager's fieId of view and plot the movement of the instantaneous ground projection of one spacecraft in the formation relative to the other. The size and shape of this effective ground target parametrize the size and shape of the actual ground target as well as the size and shape of the imager's field of view and the percentage of overlap required.

Folta, David↗

Micromachined silicon cantilever beam accelerometer incorporating an integrated optical waveguide

A micromachined cantilever beam accelerometer is described in which beam deflection is determined optically. A diving board structure is anisotropically etched into a silicon wafer. This diving board structure is patterned from the wafer backside so as to leave a small gap between the tip of the diving board and the opposite fixed edge on the front side of the wafer. In order to sense a realistic range of accelerations, a foot mass incorporated onto the end of the beam is found to provide design flexibility. A silicon nitride optical waveguide is then deposited by low pressure chemical vapor deposition (LPCVD) onto the sample. Beam deflection is measured by the decrease of light coupled across the gap between the waveguide sections. In order to investigate sensor response and simulate deflection of the beam, we utilized a separate beam and waveguide section which could be displaced from one another in a precisely controlled manner. Measurements were performed on samples with gaps of 4.0, 6.0, and 8.0 micron and the variation of the fraction of light coupled across the gap as a function of displacement and gap spacing was found to agree with overlap integral calculations.

Burcham, Kevin E.↗

Chimera grids in the simulation of three-dimensional flowfields in turbine-blade-coolant passages

When computing flows inside geometrically complex turbine-blade coolant passages, the structure of the grid system used can affect significantly the overall time and cost required to obtain solutions. This paper addresses this issue while evaluating and developing computational tools for the design and analysis of coolant-passages, and is divided into two parts. In the first part, the various types of structured and unstructured grids are compared in relation to their ability to provide solutions in a timely and cost-effective manner. This comparison shows that the overlapping structured grids, known as Chimera grids, can rival and in some instances exceed the cost-effectiveness of unstructured grids in terms of both the man hours needed to generate grids and the amount of computer memory and CPU time needed to obtain solutions. In the second part, a computational tool utilizing Chimera grids was used to compute the flow and heat transfer in two different turbine-blade coolant passages that contain baffles and numerous pin fins. These computations showed the versatility and flexibility offered by Chimera grids.

Stephens, M. A.↗

Resolution enhancement of spaceborne scatterometer data

Spaceborne wind scatterometers are designed principally to measure radar backscatter from the ocean's surface for the determination of the near-surface wind direction and speed. Although measurements of the radar backscatter are made over land, application of these measurements has been limited primarily to the calibration of the instrument. In this paper we present a method for generating enhanced resolution radar images of the earth's surface using spaceborne scatterometry. The technique is based on a new image reconstruction technique which takes advantage of the spatial overlap in scatterometer measurements made at different times to provide enhanced imaging resolution. We describe the reconstruction algorithm and demonstrate the technique using both simulated and actual Seasat-A Scatterometer (SASS) measurements. The SASS-derived images, which have approximately 4 km resolution, dramatically illustrate the resolution enhancement capability of the new technique. The technique permits utilization of both historic and contemporary scatterometer data for medium-scale monitoring of vegetation and polar ice. We discuss the tradeoff between imaging noise and resolution inherent in the technique.

Long, David G.↗

Infrared radiation parameterizations for the minor CO2 bands and for several CFC bands in the window region

Fast and accurate parameterizations have been developed for the transmission functions of the CO2 9.4- and 10.4-micron bands, as well as the CFC-11, CFC-12, and CFC-22 bands located in the 8-12-micron region. The parameterizations are based on line-by-line calculations of transmission functions for the CO2 bands and on high spectral resolution laboratory measurements of the absorption coefficients for the CFC bands. Also developed are the parameterizations for the H2O transmission functions for the corresponding spectral bands. Compared to the high-resolution calculations, fluxes at the tropopause computed with the parameterizations are accurate to within 10 percent when overlapping of gas absorptions within a band is taken into account. For individual gas absorption, the accuracy is of order 0-2 percent. The climatic effects of these trace gases have been studied using a zonally averaged multilayer energy balance model, which includes seasonal cycles and a simplified deep ocean. With the trace gas abundances taken to follow the Intergovernmental Panel on Climate Change Low Emissions 'B' scenario, the transient response of the surface temperature is simulated for the period 1900-2060.

Kratz, David P.↗

Self-, N2- and Ar-broadening and line mixing in HCN and C2H2

Self-, N2- and Ar-broadening coefficients were measured for the stretch-bend infrared combination bands nu-1 + nu-1/2 (4004/cm) of HCN and nu-1 + nu-1/5 (4091/cm) of C2H2, using a tunable difference-frequency laser. At atmospheric pressures, the Q branches of these bands exhibit significant rotational narrowing or line mixing. The broadening coefficients are fit with empirical rotationally inelastic collision rate laws, which are then used to model the line mixing in the overlapped Q-branch profiles. Simple energy gap fitting laws appear to be suitable for the shorter-range intermolecular quadrupole-quadrupole and induction forces, whereas an energy-corrected-sudden scaling law works better for the longer-range dipole-dipole and dipole-quadrupole collision partners. In all cases, the line-coupling coefficients are substantially reduced from the rotationally inelastic rates fit to the broadening coefficients, indicating that 35-70 percent of the broadening may be due to other collisional mechanisms such as cross-relaxation to the degenerate H state vibrational level.

Pine, A. S.↗

Order-sorting filter transmittance measured with an array detector

The simultaneous measurement of the spectrally and spatially variant transmittance of a linear variable order-sorting filter in a manner that closely resembles its conditions of actual use is described. The transmittance of a prototype order-sorting filter was measured in the 400- to 880-nm wavelength region by illuminating it with the output beam of a spectrophotometer while the filter was attached to the front of a 30 x 32 pixel silicon array detector. The filter was designed to be used in the output beam of a grating spectrometer to prevent the dispersal of higher diffracted orders onto an array detector. Areas of the filter that were spatially matched to the corresponding detector pixel column had measured peak transmittances of about 90 percent that were uniform to within +/- 1.5 percent along a given column. Transmittances for incident wavelengths shorter than the desired bandpass, corresponding to the order overlap region, were measured in the 0.003 range. Line spread function measurements made with the array detector indicated no significant beam spreading caused by inserting the filter into the beam.

Heaney, James B.↗

The EUVE Guest Observer Program

Following the completion of the EUVE all-sky survey, the balance of the mission is being conducted as a Guest Observer Program, under which the astronomical community may propose to make pointed spectroscopic observations in the EUV. The spectrometer covers the wavelength range 70-760 A in three overlapping bands at a resolution of 100-400. Guest observers receive time-tagged photon event lists together with instrument and spacecraft housekeeping data. Data are delivered with software tools that run in the Image Reduction and Analysis Facility and are tailored for handling EUVE satellite data.

Miller, Anne B.↗