Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optical switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Squeezing properties of a two-transverse-mode degenerate optical parametric oscillator with an injected signal

We study the classical and quantum properties of a degenerate optical parametric oscillator (DOPO) tuned to the first family of transverse modes at the down-converted frequency, under the injection of a resonant TEM{sub 10} mode. Unlike the usual single-mode DOPO with injected signal, large levels of squeezing are predicted even for relatively large injections. We interpret these results in connection with the spontaneous symmetry breaking predicted for this system in the absence of injection and with the existence of a bifurcation giving rise to the switching on of the (noninjected) TEM{sub 01} mode.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optimizing Non-Terrestrial Hybrid RF/FSO Links With Reinforcement Learning: Navigating Through Clouds

In the pursuit of ubiquitous broadband connectivity, there has been a significant shift towards the vertical expansion of communication networks into space, particularly through the exploitation of low Earth orbit (LEO) satellite constellations, which are favored for their relatively low latency. However, this approach faces many challenges that need to be addressed, including atmospheric turbulence, high path loss, and dynamic cloud formations. High-altitude pseudo-satellites (HAPS) have emerged as promising relaying layers between LEO satellites and ground stations, enhancing coverage, latency, and direct terrestrial user connectivity. While radio frequency (RF) bands suffer from congestion and limited bandwidth, free space optical (FSO) communications offer higher data rates, but are susceptible to misalignment and weather-induced signal degradation. To address these challenges, a hybrid RF/FSO approach has been proposed to take advantage of both technologies by dynamic switching between RF and FSO based on propagation channel conditions. This paper introduces a reinforcement learning-based algorithm designed to optimize the trajectory of HAPS, maneuver around cloudy areas, and seamlessly switch between the RF and FSO communication modes to maximize the achievable capacity. The proposed approach aims to maximize system performance by intelligently adapting to environmental conditions and offering a promising solution for next-generation space communication networks.

actor-critic algorithm↗

Electronic properties and rare-earth ions photoluminescence behaviors in borosilicate: SrB{sub 2}Si{sub 2}O{sub 8}

Undoped and RE ions doped SrB{sub 2}Si{sub 2}O{sub 8} were successfully synthesized. After the application of UV and VUV spectroscopy measurements, we made a novel discovery that the emission of SrB{sub 2}Si{sub 2}O{sub 8}:Eu prepared in air can be switched between red and blue by the different excitations. The information is that quite a part of Eu{sup 3+} was spontaneously reduced to Eu{sup 2+} in air. The PL properties of Eu{sup 2+} in VUV and Eu{sup 3+}, Ce{sup 3+} and Tb{sup 3+} in UV-VUV region in SrB{sub 2}Si{sub 2}O{sub 8} were evaluated for the first time. The excitation mechanisms of the O{sup 2-}Eu{sup 3+} CT, Ce{sup 3+}f-d and Tb{sup 3+}f-d transitions in UV region as well as the Eu{sup 3+}f-d, O{sup 2-}Ce{sup 3+} CT, O{sup 2-}Tb{sup 3+} CT transitions and the host lattice absorption in VUV region were established. In addition, first principles calculation within the LDA of the DFT was applied to calculate the electronic structure and linear optical properties of SrB{sub 2}Si{sub 2}O{sub 8} and the results were compared with the experimental data. - Graphical abstract: The emissions of SrB{sub 2}Si{sub 2}O{sub 8}:Eu prepared in air can be switched between the red (611 nm) and the blue (440 nm) by different excitations: under 254 nm excitation the Eu{sup 3+} red emission is dominant while under 365 nm excitation the Eu{sup 2+} blue emission presides at the emission spectra; when excited by 340 nm it emits almost the pure blue; and when excited by 395 nm the two emissions present nearly equivalent intensity.

36 MATERIALS SCIENCE↗

Synchronization of Thomson scattering measurements on MAST using an FPGA based ''Smart'' trigger unit

The MAST Thomson scattering diagnostic has recently been upgraded to make electron density and temperature measurements at 130 points across the 1.5 m diameter of the plasma. The new system is able to take 240 measurements per second using eight Nd:YAG lasers, each running at 30 Hz. The exact firing time of these lasers is adjusted with 100 ns precision using a field programmable gate array based trigger unit. Trigger pulses are produced to fire the lamps of all lasers and the Q switches with the appropriate delay depending on the warm-up status. The lasers may be fired in rapid bursts so as to achieve a high temporal resolution over eight points separated down to the microsecond level. This trigger unit receives optical trigger events and signals from external sources, allowing the trigger sequences to be resynchronized to the start of the plasma pulse and further events during the shot such as the entry of a fuelling pellet or randomly occurring plasma events. This resynchronization of the laser firing sequence allows accurate and reproducible measurements of fast plasma phenomena.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Advanced Three-Dimensional Display System

A desktop-scale, computer-controlled display system, initially developed for NASA and now known as the VolumeViewer(TradeMark), generates three-dimensional (3D) images of 3D objects in a display volume. This system differs fundamentally from stereoscopic and holographic display systems: The images generated by this system are truly 3D in that they can be viewed from almost any angle, without the aid of special eyeglasses. It is possible to walk around the system while gazing at its display volume to see a displayed object from a changing perspective, and multiple observers standing at different positions around the display can view the object simultaneously from their individual perspectives, as though the displayed object were a real 3D object. At the time of writing this article, only partial information on the design and principle of operation of the system was available. It is known that the system includes a high-speed, silicon-backplane, ferroelectric-liquid-crystal spatial light modulator (SLM), multiple high-power lasers for projecting images in multiple colors, a rotating helix that serves as a moving screen for displaying voxels [volume cells or volume elements, in analogy to pixels (picture cells or picture elements) in two-dimensional (2D) images], and a host computer. The rotating helix and its motor drive are the only moving parts. Under control by the host computer, a stream of 2D image patterns is generated on the SLM and projected through optics onto the surface of the rotating helix. The system utilizes a parallel pixel/voxel-addressing scheme: All the pixels of the 2D pattern on the SLM are addressed simultaneously by laser beams. This parallel addressing scheme overcomes the difficulty of achieving both high resolution and a high frame rate in a raster scanning or serial addressing scheme. It has been reported that the structure of the system is simple and easy to build, that the optical design and alignment are not difficult, and that the system can be built by use of commercial off-the-shelf products. A prototype of the system displays an image of 1,024 by 768 by 170 (=133,693,440) voxels. In future designs, the resolution could be increased. The maximum number of voxels that can be generated depends upon the spatial resolution of SLM and the speed of rotation of the helix. For example, one could use an available SLM that has 1,024 by 1,024 pixels. Incidentally, this SLM is capable of operation at a switching speed of 300,000 frames per second. Implementation of full-color displays in future versions of the system would be straightforward: One could use three SLMs for red, green, and blue, respectively, and the colors of the voxels could be automatically controlled. An optically simpler alternative would be to use a single red/green/ blue light projector and synchronize the projection of each color with the generation of patterns for that color on a single SLM.

Geng, Jason↗

Resonant infrared pulsed laser deposition of cyclic olefin copolymer films

Barrier materials on thin-film organic optoelectronic devices inhibit the uptake of water, oxygen, or environmental contaminants, and fabricating them is a major challenge. By definition, these barrier layers must be insoluble, so the usual routes to polymer- or organic-film deposition by spin coating are not problematic. In this paper, we report comparative studies of pulsed laser deposition of cyclic olefin copolymer (COC), an excellent moisture barrier and a model system for a larger class of protective materials that are potentially useful in organic electronic devices, such as organic light-emitting diodes (OLEDs). Thin films of COC were deposited by resonant and nonresonant infrared pulsed laser ablation of solid COC targets, using a free-electron laser tuned to the 3.43 μm C–H stretch of the COC, and a high-intensity nanosecond Q-switched laser operated at 1064 nm. The ablation craters and deposited films were characterized by scanning-electron microscopy, Fourier-transform infrared spectrometry, atomic-force microscopy, high-resolution optical microscopy, and surface profilometry. Thermal-diffusion calculations were performed to determine the temperature rise induced in the film at the C–H resonant wavelength. The results show that resonant infrared pulsed laser deposition (RIR-PLD) is an effective, low-temperature thin-film deposition technique that leads to evaporation and deposition of intact molecules in homogeneous, smooth films. Nonresonant PLD, on the other hand, leads to photothermal damage, degradation of the COC polymers, and to the deposition only of particulates.

36 MATERIALS SCIENCE↗

Charged two-exciton emission from a single semiconductor nanocrystal

Here, we study the photoluminescence (PL) time trajectories of single CdSe/ZnS nanocrystals (NCs) as a function of the laser excitation power. At the low laser power, the PL intensity of a single NC switches between the “on” and “off” levels arising from the neutral and positively charged single excitons, respectively. With the increasing laser power, an intermediate “grey” level is formed due to the optical emission from a charged multiexciton state composed of two excitons and an extra electron. Both the inter-photon correlation and the PL decay measurements demonstrate that lifetime-indistinguishable photon pairs are emitted from this negatively charged two-exciton state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental study on thermal characteristics of positive leader discharges using Mach-Zehnder interferometry

Leader discharge is one of the main phases in long air gap breakdown, which is characterized by high temperature and high conductivity. It is of great importance to determine thermal characteristics of leader discharges. In this paper, a long-optical-path Mach-Zehnder interferometer was set up to measure the thermal parameters (thermal diameter, gas density, and gas temperature) of positive leader discharges in atmospheric air. IEC standard positive switching impulse voltages were applied to a near-one-meter point-plane air gap. Filamentary channels with high gas temperature and low density corresponding to leader discharges were observed as significant distortions in the interference fringe images. Typical diameters of the entire heated channel range from 1.5 mm to 3.5 mm with an average expansion velocity of 6.7 m/s. In contrast, typical diameters of the intensely heated region with a sharp gas density reduction range from 0.4 mm to 1.1 mm, about one third of the entire heated channel. The radial distribution of the gas density is calculated from the fringe displacements by performing an Abel inverse transform. The typical calculated gas density reduction in the center of a propagating leader channel is 80% to 90%, corresponding to a gas temperature of 1500 K to 3000 K based on the ideal gas law. Leaders tend to terminate if the central temperature is below 1500 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detection and characterization of singly deuterated silylene, SiHD, via optical spectroscopy

Singly deuterated silylene has been detected and characterized in the gas-phase using high-resolution, two-dimensional, optical spectroscopy. Rotationally resolved lines in the 0 0 0 X˜ 1 A'→A˜ 1 A" band are assigned to both c-type perpendicular transition and additional parallel, axis-switching induced bands. The extracted rotational constants were combined with those for SiH 2 and SiD 2 to determine an improved equilibrium bond length, r SiH , and bond angle, θ, of 1.5137 ± 0.0003 Å and 92.04° ± 0.05°, and 1.4853 ± 0.0005 Å and 122.48° ± 0.08° for the X˜ 1 A'(0,0,0) and A˜ 1 A"(0,0,0) state respectively. The dispersed fluorescence consists of a long progression in the A˜ 1 A"(0,0,0)→X˜ 1 A'(0,ν 2 ,0) emission which was analyzed to produce vibrational parameters. Furthermore, a strong quantum level dependence of the rotationally resolved radiative decay curves is analyzed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Towards computational polar-topotronics: Multiscale neural-network quantum molecular dynamics simulations of polar vortex states in SrTiO3/PbTiO3 nanowires

Recent discoveries of polar topological structures ( e.g ., skyrmions and merons) in ferroelectric/paraelectric heterostructures have opened a new field of polar topotronics. However, how complex interplay of photoexcitation, electric field and mechanical strain controls these topological structures remains elusive. To address this challenge, we have developed a computational approach at the nexus of machine learning and first-principles simulations. Our multiscale neural-network quantum molecular dynamics molecular mechanics approach achieves orders-of-magnitude faster computation, while maintaining quantum-mechanical accuracy for atoms within the region of interest. This approach has enabled us to investigate the dynamics of vortex states formed in PbTiO 3 nanowires embedded in SrTiO 3 . We find topological switching of these vortex states to topologically trivial, uniformly polarized states using electric field and trivial domain-wall states using shear strain. These results, along with our earlier results on optical control of polar topology, suggest an exciting new avenue toward opto-electro-mechanical control of ultrafast, ultralow-power polar topotronic devices.

Linker, Thomas↗

Electro-optical time marker for high-speed cameras

Electro-optical device converts high-frequency electrical pulses into permanent optical records on film. Accurate, well defined images are formed of electronic pulses having repetition rates greater than 10,000 pulses/sec and pulse widths of 20 microseconds or less. Small electronic switch drives a silicon carbide electroluminescent diode.

Copeland, J. T., Jr.↗

Conceptual design of a hybrid Ge:Ga detector array

For potential applications in space infrared astronomy missions such as the Space Infrared Telescope Facility and the Large Deployable Reflector, integrated arrays of long-wavelength detectors are desired. The results of a feasibility study which developed a design for applying integrated array techniques to a long-wavelength (gallium-doped germanium) material to achieve spectral coverage between 30 and 200 microns are presented. An approach which builds up a two-dimensional array by stacking linear detector modules is presented. The spectral response of the Ge:Ga detectors is extended to 200 microns by application of uniaxial stress to the stack of modules. The detectors are assembled with 1 mm spacing between the elements. Multiplexed readout of each module is accomplished with integration sampling of a metal-oxide-semiconductor (MOS) switch chip. Aspects of the overall design, including the anticipated level of particle effects on the array in the space environment, a transparent electrode design for 200 microns response, estimates of optical crosstalk, and mechanical stress design calculations are included.

Parry, C. M.↗

Electrically tunable optical bistability based on one-dimensional photonic crystals with nonlinear nanocomposite materials

A one-dimensional photonic crystal structure with a nonlinear metal-dielectric nanocomposite defect layer is proposed to control the optical bistability (OB) of the transmitted wave by tuning the externally applied dc electric field. Using the transfer matrix method for dielectric layers and solving the Helmholtz nonlinear equation in the nonlinear composite layer, the linear transmittance spectrum and the nonlinear transmission curve are illustrated graphically for different applied fields. A field-dependent defect mode is observed in the linear transmittance spectrum. Consequently, the OB switch-up and -down thresholds can be manipulated via the applied field intensity. Due to the field dependence of composite layer refractive index, the physical response of the observation is the dynamical shifting of the defect mode. Moreover, it is shown that the volume fraction, shape, and type of the embedded nanoparticles as well as the kind of the dielectric host have large influences on the OB threshold. The proposed structure has significant potential applications in optical integrated devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultrafast spin exchange-coupling torque via photo-excited charge-transfer processes

In this study, optical control of spin is of central importance in the research of ultrafast spintronic devices utilizing spin dynamics at short time scales. Recently developed optical approaches such as ultrafast demagnetization, spin-transfer and spin-orbit torques open new pathways to manipulate spin through its interaction with photon, orbit, charge or phonon. However, these processes are limited by either the long thermal recovery time or the low-temperature requirement. Here we experimentally demonstrate ultrafast coherent spin precession via optical charge-transfer processes in the exchange-coupled Fe/CoO system at room temperature. The efficiency of spin precession excitation is significantly higher and the recovery time of the exchange-coupling torque is much shorter than for the demagnetization procedure, which is desirable for fast switching. The exchange coupling is a key issue in spin valves and tunnelling junctions, and hence our findings will help promote the development of exchange-coupled device concepts for ultrafast coherent spin manipulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical properties of bulk gallium nitride single crystals grown by chloride–hydride vapor-phase epitaxy

A gallium nitride crystal 5 mm in thickness was grown by chloride–hydride vapor-phase epitaxy on a sapphire substrate, from which the crystal separated during cooling. At an early stage, a three-dimensional growth mode was implemented, followed by a switch to a two-dimensional mode. Spectra of exciton reflection, exciton luminescence, and Raman scattering are studied in several regions characteristic of the sample. Analysis of these spectra and comparison with previously obtained data for thin epitaxial GaN layers with a wide range of silicon doping enabled conclusions about the quality of the crystal lattice in these characteristic regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetization reversal processes of epitaxial Fe{sub 3}Si films on GaAs(001)

We report magneto-optical Kerr microscopy study of the magnetic reversal behavior of Fe{sub 3}Si/GaAs(100) epitaxial thin films grown by molecular beam epitaxy. Results are described in the context of superconducting quantum interference device and Kerr effect vector magnetometry to study the magnetic switching behavior. By tuning the Fe concentration of the samples from 75% to 83%, we found that the ratio of uniaxial to cubic anisotropy constants {gamma} (=|K{sub u}/K{sub 1}|) would tremendously vary from 0.06 to 0.3. When the field was applied along the easy axis of Fe{sub 3}Si samples, a step feature was observed in the M-H loops. This feature has been resolved in the domain image by Kerr microscopy, in which we observed a two-switching behavior at the field where the step feature occurred. These can be qualitatively understood by considering the ratio {gamma}.

36 MATERIALS SCIENCE↗

Observation of Defect-Assisted Magnetic Vortex Core Reversal at Ultralow Critical Velocity

The stability of structures with nontrivial topology is a subject of great interest, both from fundamental and technological perspectives. The topology of a magnetic vortex, for example, results in high stability of the vortex core polarity, which is attractive for applications. This high stability, however, greatly impedes the required deterministic polarity switching, which is typically only achieved with large magnetic fields or strong dynamic driving. Here, we show that the interaction between the vortex core and manufactured nanoscale defects in the magnetic material lowers the required driving strength for core polarity reversal by more than an order of magnitude. We excite vortex dynamics in thin permalloy disks, and map the twodimensional (2D) vortex core trajectory using 3D time-resolved Kerr microscopy. In pristine samples, we observe normal gyrotropic motion of the vortex core. After laser-induced generation of defects, however, we observe repeated vortex core reversal at much-reduced driving strength. Micromagnetic simulations reveal how local reduction of exchange coupling and saturation magnetization can create vortex core reversal sites for deterministic vortex core switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering optical soliton bistability in colloidal media

We consider a mixture consisting of two species of spherical nanoparticles dispersed in a liquid medium. We show that with an appropriate choice of refractive indices and particle diameters, it is possible to observe the phenomenon of optical soliton bistability in two spatial dimensions in a broad beam power range. Previously, this possibility was ruled out in the case of a single-species colloid. As a particular example, we consider the system of hydrophilic silica particles and gas bubbles generated in the process of electrolysis in water. The interaction of two soliton beams can lead to switching of the lower branch solitons to the upper branch, and the interaction of solitons from different branches is phase independent and always repulsive.

77 NANOSCIENCE AND NANOTECHNOLOGY↗