Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “models and simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Predicting ductility of Mg/SiCp nanocomposite under multiaxial loading conditions based on unit cell modeling

This article presents an investigation on the ductility of Mg/SiCp under nine different multiaxial loading conditions based on a unit cell (or called representative volumetric element, RVE) finite element model. The constitutive relationship of magnesium matrix is characterized by a model combined Lode angle dependent plasticity model with the CPB06 plasticity model, which is able to describe the tension-compression asymmetry in magnesium matrix. The debonding of the matrix-particle interface and matrix fracture are considered by the modified Mohr-Coulomb (MMC) fracture model. Simulation results show that the interface debonding and subsequent matrix fracture are responsible for the ductility and fracture of nanocomposite. The computational results with parametric studies are compared and well correlated with experimental data, and it finally gives a stress-based full fracture locus of Mg/SiCp nanocomposite.

42 ENGINEERING↗
DOE OSTI2021

The Influence of the Instantaneous Collapse of Tailings Pond on Downstream Facilities

To evaluate the evolutionary processes guiding the formation of the tailings‐water mixtures produced by the instantaneous collapse of tailings ponds and the influence of these on downstream facilities, a 2D simulation model with reasonable boundary and working conditions derived from actual engineering practice was built in this study, and the relationship between dam‐break elevation and impact on downstream facilities was also analyzed to determine the relevant mechanism of influence. Computational results indicated that lowering the dam‐break elevation caused the maximum velocity and flooding depth, along with the flooded area at monitoring points, to gradually increase. The occurrence times of maximum velocity and flooding depth were also gradually moved forward as the breaking elevation was reduced; this effect is directly related to the increase in the total potential energy at the lower break elevations. Further simulations of sand‐prevent dams with different heights located downstream from a tailings pond were carried out to identify methods for mitigating the impact of dam failure. The results revealed that increasing the height of the sand‐prevent dam reduced the production of tailings mixtures. Based on the results, the construction of a sand‐prevent dam with a crest elevation equal to that of the starter dam was recommended.

Wang, Sha (ORCID:0000000324875445)↗
DOE OSTI2025

Compounding effects of Lake and urbanization on summer precipitation in the Greater Chicago area

Here, this study explores the impacts of Lake Michigan and Chicago's urbanization on precipitation patterns over the Greater Chicago Area, using 22 years of observational data and Weather Research and Forecasting (WRF) model simulations focused on an early summer rain event. Observational analysis reveals that urban areas consistently experience more precipitation than the adjacent southern Lake Michigan region throughout the year, particularly before 2015. However, this disparity has narrowed since 2016 due to a more rapid increase in heavy precipitation over the lake compared to urban areas. Specifically, lake precipitation has risen by 25 mm per year, compared to 15 mm per year over urban areas. Additionally, the number of days with precipitation exceeding 5 mm per day has been rising at a rate of 1.34 days per year over the lake and 0.84 days per year over urban areas. Modeling experiments reveal that both urbanization and lake effects, including lake breezes, enhance precipitation over urban areas, primarily through convergence induced by interactions between land and lake breezes. In contrast, these same factors suppress precipitation over the lake. The suppression results from Lake Michigan's stable environment, characterized by cooler surface temperatures, limited evaporation in early summer, and a high-pressure anomaly over the lake driven by urban heating, which creates upward motion over urban areas and downward motion over the lake, further influencing precipitation patterns.

Coastal urban↗
DOE OSTI2022

Residual Stress Modeling and Advanced Diffraction Measurements of 347H Steel Weldments

The 347H stainless steel is a primary high-temperature material for many energy and power generation industries. Stress relief cracking (SRC) has been a particular concern in welding of this material. The residual stress induced by welding and its evolution during post-welding heat treatment (PWHT) and subsequent operating and service conditions is one of the primary factors contributing to SRC. The lifetime of welded structure components is also controlled by the precipitation kinetics that accompanies PWHT, stress relaxation process, and long-term aging and complex synergistic factors. Various theories have been proposed in the past to explain SRC. However, a widely accepted approach to predicting the entire damage evolution and the resulting performance reduction is still lacking. This study is to demonstrate a reliable solution for two critical issues that affect the predictions. First, the residual stress distribution obtained from both simulation and neutron diffraction is compared, which increases the accuracy of mechanical analysis simulation model and therefore builds a solid basis for the lifetime prediction model. Second, the generation, evolution, and annihilation of precipitates are monitored by the synchrotron diffraction experiment. Preliminary results demonstrate the critical importance of precipitation kinetics on the residual stress distribution/redistribution during heat treatments.

Yang, Yi↗
DOE OSTI2021

Modeling framework for evaluating the impacts of hydrodynamic pressure on hydrologic exchange fluxes and residence time for a large-scale river section over a long-term period

Quantifying hydrologic exchange fluxes (HEF) at the river and subsurface interface and their residence times (RT) in subsurface are important for managing the water quality and ecosystem health in dynamic river corridor systems. In this study, a modeling framework is developed for coupling the three-dimensional (3D) multi-phase surface, subsurface flow transport, and numerical tracer model for RT in a large-scale river section over a long period. The framework is utilized to evaluate the impacts of hydrodynamic pressure on HEFs and RT for a 30 km section of the Columbia River in Washington State over a three-year period. Based on comparisons between model simulations with and without considering hydrodynamic pressure, we found that hydrodynamic pressure increases the net HEFs by 7% with river gaining water from the subsurface domain, and leads to slight reduction of RT.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Direct Geologic Constraints on the Timing of Late Holocene Ice Thickening in the Amundsen Sea Embayment, Antarctica

Abstract Constraining past West Antarctic Ice Sheet (WAIS) change helps validate numerical models simulating future ice sheet dynamics. Following rapid deglaciation during the mid‐Holocene, ice near Thwaites Glacier was ∼35 m thinner than present; however, the timing of ice regrowth to its present configuration remains unknown. To fill this knowledge gap, we present cosmogenic nuclide exposure ages of cobbles from the surface of a moraine situated between Thwaites and Pope glaciers. We infer that the moraine formed and stabilized in the Late Holocene (∼1.4 ka) when a small glacier thickened. We also present a novel reconstruction of WAIS volume constrained by sea‐level data, which demonstrates that moraine formation coincided with a large‐scale WAIS readvance. Our new geologic constraints will help inform models of the solid Earth response to surface mass loading, improving our understanding of ice sheet dynamics in a vulnerable part of WAIS.

Nichols, Keir A. [Imperial College London London U↗
DOE OSTI2021

Shallow-to-Deep Convective Transition in the Amazon (Final Report)

The frequent and extensive deep cloud formations over the Amazon Basin provide a vast area of atmospheric heating in the Tropics, forcing large-scale global circulations on daily to secular time scales. Motivated by the importance of these systems to the global climate system and the well-documented seasonal cycle in rainfall over the Amazon Basin, this study focused on improving understanding of the processes governing these systems on seasonal time scales and their impact on the typical growth of convection from early afternoon through evening, termed the shallow-to-deep transition. This study is based on observations from the Department of Energy (DOE) ARM Mobile Facility (AMF) near Manacapuru, Brazil collected during the Observations and Modeling of the Green Ocean Amazon (GOAmazon) field campaign from 1 January 2014 to 30 November 2015, together with total column water vapor (CWV) and surface meteorological observations from a dense Global Navigation Satellite System (GNSS) network within 50 km of the AMF site provided by the CHUVA Program collected in coordination with the GOAmazon campaign. The specific objectives of this study were to address the following questions: 1) What environmental conditions support the shallow-to-deep convective transition over the Central Amazon? 2) How does the relative importance of these conditions compare during the wet and dry seasons? 3) How are these conditions modulated by basin-scale transient forcing? 4) How well are these processes captured by regional model simulations convective resolving scale? Our main hypothesis was that intra-seasonal atmospheric disturbances were a primary driver of rainfall during the wet season in the Central Amazon, while localized surface heating of the land was the primary driver of enhanced rainfall during the dry season. Overall, our findings supported our hypothesis, with the convectively active phase of atmospheric Kelvin waves strongly favoring the development of larger, more organized rain systems during the wet season, while localized isolated deep convection dominated the types of rain events seen during the dry season. These results have implications for the predictability of rainfall over the Central Amazon and for its representation in climate and weather models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Improved Muon Energy Estimation Using a Detailed Model of Multiple Coulomb Scattering in the MicroBooNE LArTPC

We present an improved technique for estimating a muon's energy by measuring the deflections along its path inside the MicroBooNE detector from multiple Coulomb scattering (MCS). This approach implements several innovations that better capture detector non-idealizations compared to previous MCS-based muon energy estimators. As a result, it achieves improved resolution, reduced bias, and better data-model agreement. Using model simulation, for fully contained events the estimated bias is within 1\% and the estimated resolution narrows from 10\% to 4.3\% as muon energy increases from 0.1\,GeV to 2\,GeV. For events with particles exiting the detector volume, at least a meter of reconstructed muon track, and a muon energy below 2\,GeV, the estimated bias is less than 2\% and the estimated resolution varies from 7\% to 17\% over muon energy. These demonstrate significant improvements over the performance of previous work using an MCS-based energy estimator at MicroBooNE~\cite{mcs_2017}, which exhibited approximately twice worse resolution and a bias of 20\% over the same energy region. Data-model goodness-of-fit studies are used to validate the estimator's performance on data, showing good agreement within model uncertainties.

Cooper-Troendle, London [U. Pittsburgh (main); Fer↗
DOE OSTI2021

Evaluation of Atmospheric Boundary Layer Height From Wind Profiling Radar and Slab Models and Its Responses to Seasonality of Land Cover, Subsidence, and Advection

In this study, we evaluated the effect of land cover, atmospheric subsidence, and advection on the annual dynamics of atmospheric boundary layer (ABL) height from two contrasting sites. The first site is the Walker Branch forest, a deciduous forest of temperate climate, complex topography, and cloudy summers. The second site is the Sacramento-San Joaquin River Delta, a site of Mediterranean climate, flat terrain on a local scale, and clear summers. After testing a new algorithm to calculate ABL heights from 915 MHz radar wind profilers, we evaluated a hierarchy of three slab models to recreate the diurnal and annual patterns of ABL growth. We found that the lower ABL heights in the Delta, particularly during late summer, are driven by the combined effects of increased atmospheric subsidence and marine air advection. In both sites, the annual pattern of ABL height was strongly correlated to total daily incoming radiation, and in the Delta, the annual pattern of ABL height closely followed the seasonal patterns of sensible heat flux from a mosaic of different land covers. A land composite of latent and sensible heat fluxes obtained through a meso-network of eddy covariance measurements and the ECOsystem Spaceborne Thermal Radiometer Experiment on Space Station (ECOSTRESS) mission resulted in higher model skill, thus showing that land cover heterogeneity is an important driver of ABL growth. To conclude, model simulations show that in the Delta, restoring agricultural land to wetlands with large open water areas could result in a reduction of ABL height during those months with low subsidence and advection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The Influence of Shallow Cloud Populations on Transitions to Deep Convection in the Amazon

Abstract In this study, a pair of convection-permitting (2-km grid spacing), month-long, wet-season Weather Research and Forecasting (WRF) Model simulations with and without the eddy-diffusivity mass-flux (EDMF) scheme are performed for a portion of the Green Ocean Amazon (GoAmazon) 2014/15 field campaign period. EDMF produces an ensemble of subgrid-scale convective plumes that evolve in response to the boundary layer meteorological conditions and can develop into shallow clouds. The objective of this study is to determine how different treatments of shallow cumulus clouds (i.e., with and without EDMF) impact the total cloud population and precipitation across the Amazonian rain forest, with emphasis on impacts on the likelihood of shallow-to-deep convection transitions. Results indicate that the large-scale synoptic conditions in the EDMF and control simulations are nearly identical; however, on the local scale their rainfall patterns diverge drastically and the biases decrease in EDMF. The EDMF scheme significantly increases the frequency of shallow clouds, but the frequencies of deep clouds are similar between the simulations. Deep convective clouds are tracked using a cloud-tracking algorithm to examine the impact of shallow cumulus on the surrounding ambient environment where deep convective clouds initiate. Results suggest that a rapid increase of low-level cloudiness acts to cool and moisten the low to midtroposphere during the day, favoring the transition to deep convection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Feasibility of using reactive silicate particles with temperature-responsive coatings to enhance the security of geologic carbon storage

The large-scale deployment of geologic carbon storage will require minimizing the risk of CO 2 leakage. Here we report on a novel strategy to seal leakage pathways by injecting functionalized reactive calcium silicate (CaSiO 3 ) particles. The particles consist of a mineral silicate core within a temperature-sensitive Poly(N,N-dimethylaminoethyl methacrylate) coating that limits contact between the core and the surrounding CO 2 (aq) above a switching temperature making them relatively unreactive deep in the subsurface. If the CO 2 leaks to shallower depths and cooler temperatures, the coatings would extend and enable the silicate core to react with CO 2(aq) to form solid carbonate precipitates that reduce the permeability of the fracture or flow path. A combined laboratory- and simulation-based investigation was conducted to explore key early-stage research questions related to the feasibility of this leakage management strategy. Sand columns were injected with either coated or uncoated CaSiO 3 particles and the permeability was measured before and after exposure to CO 2 . Experiments were conducted at 35 °C and 70 °C, a range that spans the switching temperature for the coatings. Results show that at the cooler temperature the coating effectively enabled reaction and permeability reduction. At higher temperatures, the coated particles limited mineral carbonation and the permeability decrease was minimal compared to columns with uncoated particles. Here, the morphology and location of the precipitates provides insight about permeability evolution. Model simulations of 2D radial particle transport from an injection point provided insight into the effects of particle size, coating properties, and concentrations of particles in several representative rock formations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A robust aerosol impact on clouds along the subtropical to tropical transition

Marine clouds undergo a transition from subtropical stratocumulus (Sc) to shallow cumulus (Cu) and eventually to deep convective (DC) systems as air masses advect from the subtropics towards the deep tropics. How aerosols modulate this Lagrangian cloud evolution remains largely uncertain. Here we use both 5 years of satellite observations mapped along 8 d Lagrangian trajectories and complementary large-eddy simulations from 9 initiation locations across the Northeast Pacific, Southeast Pacific, and Southeast Atlantic. This Lagrangian framework allows us to quantify the aerosol effect and its co-variability with meteorological conditions on cloud microphysics, macrophysics, and top-of-atmosphere radiation through the full Sc-Cu-DC transition. We show that increasing aerosol concentrations leads to deeper and more reflective clouds throughout this cloud transition. Examining the thermodynamic evolution along the trajectory indicates a well-known trend: enhanced moistening near the boundary-layer top and lower free troposphere under polluted conditions, suggesting that part of the co-variability between aerosol and meteorological conditions may be internally driven. The agreement between model simulations and satellite data alongside the multi-basin coherence of the results indicates that aerosols systematically amplify cloud depth and reflectivity during the subtropical–to–tropical cloud transition.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Structure of an Atmospheric River over Australia and the Southern Ocean. Part I: Tropical and Midlatitude Water Vapor Fluxes

An atmospheric river (AR) impacting Australia-Tasmania and the Southern Ocean during the Austral summer on 28-29 January 2018 during the SOCRATES campaign is analyzed using both a modeling and observational approach. Gulfstream-V dropsonde measurements and GPM radar analyses were used in conjunction with Weather Research and Forecasting model simulations with water vapor tracers to investigate the relative contributions of tropical and mid-latitude moisture sources to the AR. Moisture associated with a monsoonal tropical depression became entrained into a mid-latitude frontal system that extended to 60°S over the Southern Ocean reaching the associated low pressure system 850 km off the east coast of Antarctica – effectively connecting the tropics and the polar region. Tropical moisture contributed to about 50% of the precipitable water within the AR. The tropical contribution to precipitation decreased with latitude, from > 70% over the Australian continent, to ~50% off the Australian coast, to less than 10% poleward of 60°S. Precipitation in the AR conformed to a seeder-feeder model, the seeder precipitation forming primarily from tropical sourced moisture above the altitude of the 0°C isotherm, and the feeder precipitation sourced from mid-latitude sourced moisture below the altitude of the 0°C isotherm. The integrated vapor transport (IVT) through the core of the AR reached above 500 kg m-1s-1 during 1200 UTC 28 January to 0600 UTC 29 January 29, 1.29 times the average amount of water carried by the world’s largest river, the Amazon. The high IVT strength might be attributed to the higher water vapor content associated with the warmer temperatures in Austral summer.

Rauber, Robert M.↗
DOE OSTI2019

ATF material model development and validation for priority cladding concepts

Development, implementation, and validation of material and behavior models for accident tolerant fuel (ATF) concepts in the Bison fuel performance code began in 2014 in response to the events that occurred at the Fukushima Daichii nuclear power plant in March 2011. Early on the focus was on U 3 Si 2 fuel and FeCrAl cladding as part of a high impact problem through the Nuclear Energy and Advanced Modeling Simulation (NEAMS) program. Then, developments for Cr 2 O 3 -doped UO 2 fuel, and SiC-SiC and Cr-coated zirconium-based claddings began based upon industry interests. In late fiscal year 2018 the Consortium for Advanced Simulation of Light Water Reactors (CASL) took over further ATF work in Bison in support of the Nuclear Regulatory Commission (NRC) engagement. Discussions with the NRC identified their list of priority fuel and cladding concepts, which included Cr 2 O 3 -doped UO 2 and U 3 Si 2 fuels, and Cr-coated zirconium-based and FeCrAl claddings. In particular, the NRC suggested that reports similar in form to NUREG/CR-7024 that was developed for traditional LWR materials UO 2 and zirconium-based claddings (i.e., Zircaloy-4, M5 ® , ZIRLO TM ) be created for the priority ATF concepts. The approach to ATF capability development in Bison since the beginning has been two-fold: (1) empirical correlations and (2) multiscale model development. Both approaches have uncertainty inherent to them. Uncertainty in empirical correlations is bounded by the experimental data upon which with the correlation was developed. Models developed through a multiscale approach have uncertainty associated with the lower length scale calculations and input parameters that must be propagated to the engineering scale model in Bison. In this report, the recommended models, their range of applicability (e.g., temperature, fluence), and associated uncertainty for the NRC priority clad concepts Cr-coated zirconium based clad and FeCrAl are presented in a manner similar to the aforementioned NUREG. In addition, in the absence of experimental data for validation, demonstration cases are presented that investigate the ballooning and burst behavior of Cr-coated and FeCrAl clads as well as tritium permeation in FeCrAl. A portion of the study by Gamble et al. on FeCrAl failure is also revisited with the latest updated models. First, the nominal results are shown using the as implemented models. Then a sensitivity analysis and uncertainty quantification is performed to assess the impact of the uncertainties in the models on the parameters of interest. For the Cr-clad ballooning case the parameter of interest is the time to burst. For the revisited FeCrAl study, the parameter of interest is the pressure at burst.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Towards accelerating particle-resolved direct numerical simulation with neural operators

In this paper, we present our ongoing work aimed at accelerating a particle-resolved direct numerical simulation model designed to study aerosol–cloud–turbulence interactions. The dynamical model consists of two main components—a set of fluid dynamics equations for air velocity, temperature, and humidity, coupled with a set of equations for particle (i.e., cloud droplet) tracing. Rather than attempting to replace the original numerical solution method in its entirety with a machine learning (ML) method, we consider developing a hybrid approach. We exploit the potential of neural operator learning to yield fast and accurate surrogate models and, in this study, develop such surrogates for the velocity and vorticity fields. We discuss results from numerical experiments designed to assess the performance of ML architectures under consideration as well as their suitability for capturing the behavior of relevant dynamical systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Biomass char gasification kinetic rates compared to data, including ash effects

This investigation provides both experimental and theoretical analyses of biomass char gasification kinetics over 1150–1350 °C in the environment of CO 2 , H 2 O and combinations of these reactants. The experimental data include continuous measurements of particle mass, external and internal temperatures, shape, and size with periodic but not continuous measurements of char porosity, pore size distribution, and pore surface area. The model describes heterogeneous char gasification for poplar wood, corn stover and switchgrass in different shapes and industrially relevant sizes (12.5 mm and smaller). Nonlinear least-squares regression produces optimized power-law model parameters for global kinetics that describe biomass char gasification with respect to both CO 2 and H 2 O separately and in combination. A single set of kinetic parameters describes reaction rates for all three fuels. Model simulations agree with measured data at all stages of char conversion even though the observed mass loss rates change significantly with conversion. In conclusion, the change in rate with conversion depends strongly on ash content, and this investigation provides a simple and theoretically based reaction rate expression that includes the effect of inert ash occupying an increasing portion of the reactive surface with increased conversion.

09 BIOMASS FUELS↗
DOE OSTI2022

Produced Water and Waste Heat-aided Blowdown Water Treatment: Using Chemical and Energy Synergisms for Value Creation

The project objective was to develop a cooling blowdown water (BDW) treatment process utilizing produced water (PW) and low-grade heat to maximize water reuse and saleable by-product generation while reducing chemical and energy footprints of the treatment. The proposed treatment process consists of mixing, softening, organics and suspended solids removal, reverse osmosis (RO), thermal desalination, and brine electrolysis. BDW samples collected from a local coal-fired power plant and PW samples from two shale gas production wells were used in this study. Each treatment unit was first designed and tested to quantify its treatment efficiency, and its chemical and energy requirements. In addition, a process model was developed and model simulations were conducted based on the experimental results and literature data to optimize the treatment process. A techno-economic analysis was conducted to quantify chemical and energy savings as well as production of 10-lb brine as a saleable product. With the field-collected BDW and PW samples, mixing experiments determined a volumetric mixing ratio 10:1 (BDW:PW) resulted in the best performance of multivalent ions removal and largest chemical savings for softening. Softening of the BDW/PW mixtures using alkaline chemicals (Na 2 CO 3 and NaOH) achieved 95%-100% removal of scaling-forming cations (Ca, Mg, Fe, Ba, Sr) and 60% of silicon, and 10% of total organic carbon (TOC). The mixing and softening treatments yielded an effluent with total dissolved solids (TDS) concentration of 23 g/L. Activated carbon (AC) filtration removed TOC to a low level (< 3 mg/L) and further removed remaining scale-forming divalent metals and silica from the softened water. The AC filtration resulted in a slight reduction of TDS from 23 g/L to 20 g/L, leaving behind only mostly monovalent ions (i.e., sodium and chloride) in the filtered water. These pretreatments yielded a feed water that met the criteria of the downstream reverse osmosis (RO) to prevent membrane fouling. A cross-flow RO system was used to further concentrate the TDS of the AC effluent. Various factors including TDS, pH, and applied pressure were examined and optimal conditions were determined for the co-treatment process. An integrated process consisting of mixing, softening, AC filtration and RO was used to treat a continuous flow (0.25 – 1.2 L/min, or 0.07 – 0.32 gpm) and successfully generated RO permeate as product water (TDS < 0.5 g/L) for reuse in cooling operation, and a concentrate (TDS ~ 45 g/L) to be further treated in a thermal desalination unit. These flow rates meet the FOA’s criterion of 0.01 – 1 gpm. Overall, the co-treatment of BDW/PW allowed shorter ramp-up time compared to treatment of BDW alone. It resulted in 40% and 55% savings of Na 2 CO 3(s) and NaOH, respectively, compared to treating the BDW and PW individually for the same level of softening. The co-treatment also resulted in a 29% energy saving compared to treatment of BDW only for the level of TDS concentration. A thermal desalination system was designed using CFD simulations and manufactured in the WVU Innovation Hub for further treatment of the RO concentrate to generate 10-lb brine. The system has a design flow rate of 2 gpm and has been successfully tested. A bench-scale brine electrolysis system was developed for on-site generation of chlorine/hypochlorite (Cl 2 /OCl - ) and caustic soda (NaOH) as useful chemicals for the co-treatment process. Using salt solutions (0.5 M and 1 M), the system achieved faradaic efficiencies of 93%-97% and 70%-77% for caustic soda and chlorine/hypochlorite generation, respectively. An economic analysis showed that the electricity costs for on-site generation of these chemicals were significantly lower than the chemical prices offered by suppliers. An industrial-scale process model consisting of mixing, softening, AC filtration, RO, thermal desalination, and brine electrolysis was developed using the Aspen Plus V9 in conjunction with Aspen Custom Modeler V9. The model serves as a solvable Aspen Plus model and as basis to form the costing infrastructure. In addition, techno-economic analysis considering capital, operating, and transportation costs was conducted. An optimization solution showed that produced water for mixing is still advantageous in low quantities. The optimum solution approaches a leveled cost of water (LCW) of 2 $/m 3 which becomes cost competitive with nominal water treatment prices.

20 FOSSIL-FUELED POWER PLANTS↗