Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measurement of gas-concentration-driven permeation for the examination of permeability, solubility, and diffusivity in varying materials

This manuscript describes the development and operation of an apparatus for the measurement of steady-state and transient gas permeation through different types of solid materials with varying geometries. It is capable of operation from 293 K to 673 K and could theoretically be used with any non-corrosive gas or a mix of gases, although only hydrogen isotopes are used in the current study. A quadrupole mass spectrometer is used to measure permeation fluxes as low as 1011 molecules/s. This unique test setup allows for the simultaneous measurement of diffusivity, solubility, and permeability. Furthermore, varying the pressure in the fore-sample volume allows for tests of Sievert’s law and can give information on surface effects.

Young, Katherine T. (ORCID:0000000285845576)↗
NASA NTRS1993

Thermal-mechanical behavior of high precision composite mirrors

Composite mirror panels were designed, constructed, analyzed, and tested in the framework of a NASA precision segmented reflector task. The deformations of the reflector surface during the exposure to space enviroments were predicted using a finite element model. The composite mirror panels have graphite-epoxy or graphite-cyanate facesheets, separated by an aluminum or a composite honeycomb core. It is pointed out that in order to carry out detailed modeling of composite mirrors with high accuracy, it is necessary to have temperature dependent properties of the materials involved and the type and magnitude of manufacturing errors and material nonuniformities. The structural modeling and analysis efforts addressed the impact of key design and materials parameters on the performance of mirrors.

Kuo, C. P.↗
DOE OSTI2018

Graphitic Carbon Materials for Advanced Sodium-Ion Batteries

Lithium-ion batteries (LIBs) have dominated the energy storage market for more than two decades; however, the quest for lower-cost battery alternatives is rapidly expanding, especially for large-scale applications. Sodium-ion batteries (SIBs) have recently experienced an impressive resurgence owing to the earth's abundance of sodium resources and the similar electrochemistry of SIBs and the well-established LIBs. Nonetheless, whereas cost-effective and reliable graphite anodes have served as a cornerstone in current LIB technology, one of the major limitations of SIBs has been the inability to exploit graphite as an electrode because of its negligible sodium storage capability. Recently, however, clear progress has been made in preparing high-performance graphitic carbon anodes for SIBs with new findings on the mechanisms of sodium storage. This paper aims to review the progress made in understanding the sodium storage mechanisms in graphitic carbon materials and comprehensively summarize the start-of-the-art achievements by surveying the correlations among the type of graphitic material, microstructure, sodium storage mechanisms, and electrochemical performance in SIBs. In addition, perspectives related to practical applications, including the electrolyte, coulombic efficiency, and applicability in sodium-ion full cells, are also presented.

25 ENERGY STORAGE↗
DOE OSTI2017

Predictive characterization of aging and degradation of reactor materials in extreme environments. Final report, December 20, 2013 - September 20, 2017

Understanding of reactor material behavior in extreme environments is vital not only to the development of new materials for the next generation nuclear reactors, but also to the extension of the operating lifetimes of the current fleet of nuclear reactors. To this end, this project conducted a suite of unique experimental techniques, augmented by a mesoscale computational framework, to understand and predict the long-term effects of irradiation, temperature, and stress on material microstructures and their macroscopic behavior. The experimental techniques and computational tools were demonstrated on two distinctive types of reactor materials, namely, Zr alloys and high-Cr martensitic steels. These materials are chosen as the test beds because they are the archetypes of high-performance reactor materials (cladding, wrappers, ducts, pressure vessel, piping, etc.). To fill the knowledge gaps, and to meet the technology needs, a suite of innovative in situ transmission electron microscopy (TEM) characterization techniques (heating, heavy ion irradiation, He implantation, quantitative small-scale mechanical testing, and various combinations thereof) were developed and used to elucidate and map the fundamental mechanisms of microstructure evolution in both Zr and Cr alloys for a wide range environmental boundary conditions in the thermal-mechanical-irradiation input space. Knowledge gained from the experimental observations of the active mechanisms and the role of local microstructural defects on the response of the material has been incorporated into a mathematically rigorous and comprehensive three-dimensional mesoscale framework capable of accounting for the compositional variation, microstructural evolution and localized deformation (radiation damage) to predict aging and degradation of key reactor materials operating in extreme environments. Predictions from this mesoscale framework were compared with the in situ TEM observations to validate the model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1979

On volatile element trends in gas-rich meteorites

Ten volatile elements (and non-volatile Co) in co-existing light and dark portions of 5 gas-rich chondrites were studied. Patterns of distinct but non-uniform enrichment by dark admixing material are revealed. The dark admixing material is enriched in Cs; Bi and Tl covary in it. It is compositionally unique from known types of primitive materials and is apparently not derived by secondary processes from such materials.

Bart, G.↗
NASA NTRS2000

All-Optical Micro Motors Based on Moving Gratings in Photosensitive Media

An all-optical micro motor with a rotor driven by a traveling wave of surface deformation of a stator being in contact with the rotor is being studied. Instead of an ultrasonic wave produced by an electrically driven piezoelectric actuator as in ultrasonic motors, the wave is a result of a photo induced surface deformation of a photosensitive material produced by a traveling holographic grating. Two phase modulated coherent optical beams generate the grating. Several types of photosensitive materials are studied such as photorefractive crystals, photosensitive piezoelectric ceramics, and side-chain liquid crystalline polyesters. In order to be considered as a possible candidate for micro motors, the material should exhibit surface deformation produced by moving grating of the order of 10 micron. Deformations produced by static holographic gratings are studied in photorefractive crystals of LiNbO3 using high vertical resolution surface profilometer Dektak 3 and surface interferometer WYKO. An experimental set-up with moving grating has been developed. The set-up uses a two-beam interferometry configuration with one beam being reflected by a thin mirror mounted on a loud speaker. A ramp voltage signal generator drives the speaker. Changing voltage, polarity, and frequency of the signal can easily generate vibrating gratings or moving gratings in both directions. A vibrating grating has been applied to a photorefractive crystal of BSO controlled by an external electric field of the order of 104 V/cm. We have additionally studied effects of moving grating interaction with light absorbing fluids such as solutions of 2,9,16,23-Tetrakis(phenylthio)-29H, 31 Hphthalocyanine in chlorobenzene in capillary tubes. The purpose of using a liquid is to show that the moving gratings can force a liquid to shift. The interaction of a single low power focused laser beam at 633 nm with such fluid produced an intensive circular motion, which also might be applied to all-optical micro motors or actuators.

Curley, M.↗
NASA NTRS2016

An AERONET-Based Aerosol Classification Using the Mahalanobis Distance

We present an aerosol classification based on AERONET aerosol data from 1993 to 2012. We used the AERONET Level 2.0 almucantar aerosol retrieval products to define several reference aerosol clusters which are characteristic of the following general aerosol types: Urban-Industrial, Biomass Burning, Mixed Aerosol, Dust, and Maritime. The classification of a particular aerosol observation as one of these aerosol types is determined by its five-dimensional Mahalanobis distance to each reference cluster. We have calculated the fractional aerosol type distribution at 190 AERONET sites, as well as the monthly variation in aerosol type at those locations. The results are presented on a global map and individually in the supplementary material. Our aerosol typing is based on recognizing that different geographic regions exhibit characteristic aerosol types. To generate reference clusters we only keep data points that lie within a Mahalanobis distance of 2 from the centroid. Our aerosol characterization is based on the AERONET retrieved quantities, therefore it does not include low optical depth values. The analysis is based on point sources (the AERONET sites) rather than globally distributed values. The classifications obtained will be useful in interpreting aerosol retrievals from satellite borne instruments.

Hamill, Patrick↗
NASA NTRS1981

Single-pass rub testing of abradable seal materials

A pendulum-type test device has been built for use in studying rubs between a turbine or compressor blade tip or labyrinth seal knife edge and specimens of abradable gas path seal materials. The device allows measurement of the rub energy dissipated in a single wear event, along with friction and normal forces and wear. Subsequent rubs over the same surface can also be monitored, with microscopic observation of the rub surface being possible after any of the passes. The device was used in tests of several potential abradable materials, ranging from porous to fully dense. It was shown that the rub energy dissipated in initial and subsequent passes is a fundamental parameter in the evaluation of material abradability. Rub energy was found to be influenced by such factors as: density and tensile (or yield) strength of the abradable material, prior densification or work hardening of the rub surface, and the sharpness of the leading edge of the blade tip.

Kennedy, F. E.↗
DOE OSTI2017

Negative Poisson’s Ratio in 1T-Type Crystalline Two-Dimensional Transition Metal Dichalcogenides

Materials with a negative Poisson’s ratio, also known as auxetic materials, exhibit unusual and counterintuitive mechanical behaviour—becoming fatter in cross-section when stretched. Such behaviour is mostly attributed to some special re-entrant or hinged geometric structures regardless of the chemical composition and electronic structure of a material. Here, using first-principles calculations, we report a class of auxetic single-layer two-dimensional materials, namely, the 1T-type monolayer crystals of groups 6–7 transition-metal dichalcogenides, MX 2 (M=Mo, W, Tc, Re; X=S, Se, Te). These materials have a crystal structure distinct from all other known auxetic materials. They exhibit an intrinsic in-plane negative Poisson’s ratio, which is dominated by electronic effects. We attribute the occurrence of such auxetic behaviour to the strong coupling between the chalcogen p orbitals and the intermetal t 2g -bonding orbitals within the basic triangular pyramid structure unit. In conclusion, the unusual auxetic behaviour in combination with other remarkable properties of monolayer two-dimensional materials could lead to novel multi-functionalities.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Flat-Plate Solar-Collector Performance Evaluation with a Solar Simulator as a Basis for Collector Selection and Performance Prediction

The use of a solar simulator for performance determination permits collector testing under standard conditions of wind, ambient temperature, flow rate and sun. The performance results determined with the simulator have been found to be in good agreement with outdoor performance results. The measured thermal efficiency and evaluation of 23 collectors are reported which differ according to absorber material (copper, aluminum, steel), absorber coating (nonselective black paint, selective copper oxide, selective black nickel, selective black chrome), type of glazing material (glass, Tedlar, Lexan, antireflection glass), the use of honeycomb material and the use of vacuum to prevent thermal convection losses. The collectors were given performance rankings based on noon-hour solar conditions and all-day solar conditions. The determination with the simulator of an all-day collector performance was made possible by tests at different incident angles. The solar performance rankings were made based on whether the collector is to be used for pool heating, hot water, absorption air conditioning, heating, or for a solar Rankine machine.

Simon, F. F.↗
NASA NTRS1975

Flat-plate solar-collector performance evaluation with a solar simulator as a basis for collector selection and performance prediction

This paper reports the measured thermal efficiency and evaluation of 23 collectors which differ according to absorber material (copper, aluminum, steel), absorber coating (nonselective black paint, selective copper oxide, selective black nickel, selective black chrome), type of glazing material (glass, Tedlar, Lexan, anti-reflection glass), the use of honeycomb material and the use of vacuum to prevent thermal convection losses. The collectors are given performance rankings based on noon-hour solar conditions and all-day solar conditions. The determination with the simulator of an all-day collector performance is made possible by tests at different incident angles. The solar performance rankings are made based on whether the collector is to be used for pool heating, hot water, absorption air conditioning, heating, or for a solar Rankine machine.

Simon, F. F.↗
NASA NTRS1980

Orbiter thermal pressure drop characteristics for shuttle orbiter thermal protection system components: High density tile, low density tile, densified low density tile, and strain isolation pad

Pressure drop tests were conducted on available samples of low and high density tile, densified low density tile, and strain isolation pads. The results are presented in terms of pressure drop, material thickness and volume flow rate. Although the test apparatus was only capable of a small part of the range of conditions to be encountered in a Shuttle Orbiter flight, the data serve to determine the type of flow characteristics to be expected for each material type tested; the measured quantities also should serve as input for initial venting and flow through analysis.

Lawing, P. L.↗
DOE OSTI2025

Decoding the interstitial/vacancy nature of dislocation loops with their morphological fingerprints in face-centered cubic structure

Dislocation loops are critical defects inducing detrimental effects like embrittlement and swelling in materials under irradiation. Distinguishing their nature (interstitial- or vacancy-type) is a long-standing challenge with great implications for understanding radiation damage. Here, we demonstrate that the morphology of radiation-induced Frank loops can unveil their nature in face-centered cubic (fcc) structure: Circular loops are interstitial-type in all fcc materials, while segmented loops are vacancy-type in high stacking fault energy (SFE) alloys but varied-type in low SFE and high-entropy alloys. The polygonal shape is attributed to the dissociation of an a 0 /3<111> dislocation into an a 0 /6<112> Shockley partial and an a 0 /6<110> stair-rod dislocation. The dissociation of vacancy loops is energetically favorable, whereas interstitial loops require external stimuli to promote dislocation propagation. This “morphology-nature” correlation not only highlights the asymmetry of vacancy/interstitial loops but also offers an efficient way to distinguish loop nature for a wide range of materials.

Ma, Kan [City Univ. of Hong Kong, Kowloon (Hong Ko↗
DOE OSTI2018

Early Observations of the Type Ia Supernova iPTF 16abc: A Case of Interaction with Nearby, Unbound Material and/or Strong Ejecta Mixing

Early observations of Type Ia supernovae (SNe Ia) provide a unique probe of their progenitor systems and explosion physics. Here we report the intermediate Palomar Transient Factory (iPTF) discovery of an extraordinarily young SN Ia, iPTF 16abc. By fitting a power law to our early light curve, we infer that first light for the SN, that is when the SN could have first been detected by our survey, occurred only $0.15\pm_{0.07}^{0.15}$ days before our first detection. In the $\sim$24 hr after discovery, iPTF 16abc rose by $\sim$2 mag, featuring a near-linear rise in flux for $\gtrsim$3 days. Early spectra show strong C II absorption, which disappears after $\sim$7 days. Unlike the extensivelyobserved SN Ia SN 2011fe, the $(B-V)_0$ colors of iPTF 16abc are blue and nearly constant in the days after explosion. We show that our early observations of iPTF 16abc cannot be explained by either SN shock breakout and the associated, subsequent cooling or the SN ejecta colliding with a stellar companion. Instead, we argue that the early characteristics of iPTF 16abc, including (i) the rapid, near-linear rise, (ii) the nonevolving blue colors, and (iii) the strong C II absorption, are the result of either ejecta interaction with nearby, unbound material or vigorous mixing of radioactive 56 Ni in the SN ejecta, or a combination of the two. Finally, in the next few years, dozens of very young normal SNe Ia will be discovered, and observations similar to those presented here will constrain the white dwarf explosion mechanism.

surveys↗
DOE OSTI2022

Anharmonic Cation–Anion Coupling Dynamics Assisted Lithium‐Ion Diffusion in Sulfide Solid Electrolytes

Abstract Sulfide‐based lithium superionic conductors often show higher Li‐ion conductivity than other types of electrolyte materials. This work unveils a unique Li‐ion conductive behavior in these materials through the perspective of anharmonic coupling assisted Li‐ion diffusion. Li hopping events can happen simultaneously with various types of lattice dynamics, while only a statistically important synchronization of motions may indicate coupling. This method enables a direct evaluation of the coupling strength between these motions, which more fundamentally decides if a specific type of lattice motion is really anharmonically coupled to the Li hopping event and whether the coupling can facilitate the Li diffusion. By a new ab initio computational approach, this work unveils a unique phenomenon in prototype sulfide electrolytes in comparison with typical halide ones, that Li‐ion conduction can be boosted by the anharmonic coupling of low‐frequency Li phonon modes with high‐frequency anion stretching or flexing phonon modes, rather than the low‐frequency rotational modes. The coupling pushes Li ions toward the diffusion channels for reduced diffusion barriers. The result from the lower temperature range (≈0–300 K) of simulation can also be more relevant to the application of solid‐state batteries.

Chemistry↗
DOE OSTI2017

Investigation of the Mechanical Properties of GdBa{sub 2}Cu{sub 3}O{sub 7−δ} Added with Nanosized Ferrites ZnFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} Using Ultrasonic Measurement

Recently, there is much interest in studying the effect of nanosized ferrites addition on high- T{sub c} superconductors. However, little information is available on the mechanical properties. We have investigated the effect of (CoFe{sub 2}O{sub 4}){sub x} and (ZnFe{sub 2}O{sub 4}){sub x} nanosized ferrites with 0.01 ≤ x ≤ 0.40 on the mechanical properties of the high- T{sub c} superconducting compound GdBa{sub 2}Cu{sub 3}O{sub 7−δ} (Gd-123) prepared by the conventional solid-state reaction technique. Elastic parameters including shear modulus (G), bulk modulus (B), and Young’s modulus (E) of all samples were inspected using ultrasonic measurements and compared with Vickers microhardness results. Furthermore, the porosity of the samples was investigated and correlated to Young’s modulus, which was corrected to zero porosity using different models. The corrected values were correlated with Vickers microhardness. Moreover, the Debye temperature (θ{sub D}) and the electron-phonon coupling factor (λ) were also determined as a function of x. We observed that the different nanoparticles addition has influenced the Gd-123 compound differently. For (ZnFe{sub 2}O{sub 4}){sub x} added samples, the mechanical properties and Debye temperature improved up to x = 0.06, then deteriorated with further addition. However, (CoFe{sub 2}O{sub 4}){sub x} addition improved the mechanical properties for all samples with x up to 0.40. We found that the proportionality constant between the corrected values of E and H{sub v} and G and H{sub v} are strongly dependent on the porosity corrections and the kind of superconducting material. This indicates that the widely used formula E = 81.96 H{sub v} may not be valid for all types of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

All-Inorganic Open-Framework Chalcogenides, A 3 Ga 5 S 9 · x H 2 O ( A = Rb and Cs), Exhibiting Ultrafast Uranyl Remediation and Illustrating a Novel Post-Synthetic Preparation of Open-Framework Oxychalcogenides

Fast and effective uranyl sequestration is of interest to the nuclear industry. Recently layered chalcogenide materials have demonstrated fast, selective, and efficient sorption properties towards uranyl cations and the development and investigation of new types of chalcogenide materials continues to be of interest and represents an intriguing option for uranyl remediation. Three new all-inorganic A 3 Ga 5 S 9 ·xH 2 O (A = Rb, Rb/Cs, and Cs) open-framework chalcogenides were obtained via an in-situ alkali carbonate to alkali sulfide conversion process achieved under mild hydrothermal conditions. The structures of the all-inorganic open framework chalcogenides consist of a 2-fold interpenetrated diamond-like 3D framework containing pseudo-T 3 [Ga 10 S 20 ] 10– supertetrahedra. 48% of the structural volume is occupied by A + cations and water species, as established by single-crystal X-ray diffraction (SCXRD), infrared (IR) and energy-dispersive (EDS) spectroscopies. The dynamic nature of the A + cations and water molecules within the pores was investigated via single crystal X-ray diffraction as well as by IR spectroscopy monitored H 2 O to D 2 O exchange experiments. Framework stability was probed with post-synthetic treatment of A 3 Ga 5 S 9 ·xH 2 O (A = Rb and Cs) samples in acidic solutions that resulted in the formation of the oxysulfide (A/H) 3 Ga 5 S 9–y O y ·xH 2 O (A = Rb and Cs; y = 0–1), as shown by SCXRD and IR. Ion-exchange studies on A 3 Ga 5 S 9 ·xH 2 O (A = Rb and Cs) samples were carried out utilizing a uranyl acetate solution. The presence of the UO 2 2+ species in the ion-exchanged product was supported by IR and EDS spectroscopies. Batch method ion-exchange experiments on Cs 3 Ga 5 S 9 ·xH 2 O powder demonstrated fast kinetics with 95% uranyl removal from the uranyl acetate solution during the first minute, a maximum uranyl uptake capacity of 15mg/g, and the subsequent elution of uranyl species with KCl solution. Furthermore, the porous and dynamic nature of the A 3 Ga 5 S 9 ·xH 2 O framework coupled with effective UO 2 2+ ···S 2– bonding interactions makes it a good potential sorbent for uranyl remediation from aqueous media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗