Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “magnetic diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Magnetic instability in Ce heavy fermion compounds

Different types of cerium heavy fermion compounds are discussed: cubic antiferromagnetic ground states (CeAl 2 , CePb 3 , Celn 3 ) and Pauli paramagnetic ground states (CeSn 3 , CeRu 2 Si 2 ). Applying external variables such as pressure or magnetic field restores a localized Fermi liquid state. Special attention is paid to CeRu 2 Si 2 which is approaching a singular magnetic instability for T→ 0. Comparison between pressure and alloying effects emphasize the important role of the itineracy of the 4f electrons at the magnetic instability.

36 MATERIALS SCIENCE↗

Advancing Sodium-Ion Battery Cathodes: A Low-Cost, Eco-Friendly Mechanofusion Route from TiO 2 Coating to Ti 4+ Doping

Layered oxide battery cathodes often require extra stabilization strategies, such as surface coating or doping, to mitigate side reactions and enhance longevity. Conventional methods such as aqueous deposition and atomic layer deposition are costly and environmentally unfriendly and even damage the original structure, especially for air-sensitive sodium-ion battery (SIB) cathodes. Herein, we introduce an all-dry mechanofusion technique that modifies hydroxide precursors with TiO 2 coating before sintering with a sodium source. Using advanced characterizations including X-ray diffraction, neutron diffraction, and solid-state nuclear magnetic resonance for structural insights, X-ray absorption spectroscopy to study metal valence states, and transmission X-ray microscopy for nanoscale visualization of nickel oxidation states, we verified that postsintering transforms TiO 2 surface coating into Ti doping, leading to improved Ni-oxidation homogeneity, modified charge compensation, and enhanced thermal stability. Electrochemical tests reveal superior performance in capacity retention, rate capability, and air stability for these modified cathodes, with pouch cells maintaining over 85% capacity after 650 cycles. This method presents a sustainable, cost-effective route for advanced SIB cathode development.

36 MATERIALS SCIENCE↗

Spin and Orbital Effects on Asymmetric Exchange Interaction in Polar Magnets: M(IO 3 ) 2 (M = Cu and Mn)

We report magnetic polar materials feature an astonishing range of physical properties, such as magnetoelectric coupling, chiral spin textures, and related new spin topology physics. This is primarily attributable to their lack of space inversion symmetry in conjunction with unpaired electrons, potentially facilitating an asymmetric Dzyaloshinskii–Moriya (DM) exchange interaction supported by spin–orbital and electron–lattice coupling. However, engineering the appropriate ensemble of coupled degrees of freedom necessary for enhanced DM exchange has remained elusive for polar magnets. Here, we study how spin and orbital components influence the capability of promoting the magnetic interaction by studying two magnetic polar materials, α-Cu(IO 3 ) 2 ( 2 D) and Mn(IO 3 ) 2 ( 6 S), and connecting their electronic and magnetic properties with their structures. The chemically controlled low-temperature synthesis of these complexes resulted in pure polycrystalline samples, providing a viable pathway to prepare bulk forms of transition-metal iodates. Rietveld refinements of the powder synchrotron X-ray diffraction data reveal that these materials exhibit different crystal structures but crystallize in the same polar and chiral P2 1 space group, giving rise to an electric polarization along the b-axis direction. The presence and absence of an evident phase transition to a possible topologically distinct state observed in α-Cu(IO 3 ) 2 and Mn(IO 3 ) 2 , respectively, imply the important role of spin–orbit coupling. Neutron diffraction experiments reveal helpful insights into the magnetic ground state of these materials. While the long-wavelength incommensurability of α-Cu(IO 3 ) 2 is in harmony with sizable asymmetric DM interaction and low dimensionality of the electronic structure, the commensurate stripe AFM ground state of Mn(IO 3 ) 2 is attributed to negligible DM exchange and isotropic orbital overlapping. The work demonstrates connections between combined spin and orbital effects, magnetic coupling dimensionality, and DM exchange, providing a worthwhile approach for tuning asymmetric interaction, which promotes evolution of topologically distinct spin phases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and Characterization of Isostructural Th(IV) and U(IV) Pyridine Dipyrrolide Complexes

A series of pyridine dipyrrolide actinide(IV) complexes, ( Mes PDP Ph )AnCl 2 (THF) and An( Mes PDP Ph ) 2 (An = U, Th, where ( Mes PDP Ph ) is the doubly deprotonated form of 2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine), have been prepared. Characterization of all four complexes has been performed through a combination of solid- and solution-state methods, including elemental analysis, single crystal X-ray diffraction, and electronic absorption and nuclear magnetic resonance spectroscopies. Collectively, these data confirm the formation of the mono- and bis-ligated species. Time-dependent density functional theory has been performed on all four An(IV) complexes, providing insight into the nature of electronic transitions that are observed in the electronic absorption spectra of these compounds. Room temperature, solution-state luminescence of the actinide complexes is presented. Both Th(IV) derivatives exhibit strong photoluminescence; in contrast, the U(IV) species are nonemissive.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Néel Temperature and Unusual Thermal Expansion in Flux-Grown FeCrAs Crystals

Here, we report results from our experimental investigation of the distorted kagome compound FeCrAs. We used tin metal as a flux to produce needlelike crystals, which we characterized using single-crystal X-ray diffraction as well as measurements of magnetization, electrical transport, and heat capacity. The physical behaviors differ in two notable ways from those of previously studied crystals grown from a stoichiometric melt. First, the Néel temperature is found to be 150 K, about 25 K higher than in previous reports. Second, the Sommerfeld coefficient, a measure of the electronic heat capacity, is found to be significantly smaller than the previously reported value. These differences indicate stronger magnetic interactions and fewer charge carriers in the flux-grown crystals, which may be related to differences in stoichiometry or disorder. In addition, we find unusual thermal expansion behavior, with an anomaly at the Néel temperature and nearly temperature-independent thermal expansion along the hexagonal c-axis above this transition. This suggests significant spin–lattice coupling, which may provide insight into nonmetallic transport properties that have been associated with anomalous charge carrier scattering. The flux growth presented here may provide a useful approach for tuning crystal chemistry to explore magnetism, transport, and spin–lattice coupling in this interesting material.

McGuire, Michael A. [Oak Ridge National Laboratory↗

Na 2 Mn 3 Se 4 : Strongly Frustrated Antiferromagnetic Semiconductor with Complex Magnetic Structure

A new ternary selenide, Na 2 Mn 3 Se 4 , was prepared by a stoichiometric reaction between Na 2 Se 4 and metallic Mn at 923 K. Crystal structure determination revealed a new structure type, built of alternating layers of Na + ions and [Mn 3 Se 4 ] 2– anionic slabs. Band structure calculations indicate that Na 2 Mn 3 Se 4 is an indirect band gap semiconductor with E g = 1.59 eV, although a direct band gap is only marginally larger, at 1.64 eV. The material shows antiferromagnetic (AFM) ordering at 27 K, while the Weiss constant of ~–400 K suggests much stronger nearest-neighbor AFM exchange between the Mn sites. This discrepancy is attributed to the strong spin frustration caused by a triangulated arrangement of the Mn sites in the [Mn 3 Se 4 ] 2– layer. In conclusion, the magnetic frustration leads to the stabilization of a complex AFM ordered structure with non-collinear arrangement of the Mn magnetic moments, as established from neutron diffraction data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical-Induced Slippage in Bulk WSe 2

Layered transition metal dichalcogenides (TMDs) are the focus of intense research owing to their semiconducting properties and applications in many fields of research. In addition to intercalation and exfoliation, physical strain modulation has been reported as a way to mechanically-induce the slippage of layers and influence the properties of TMDs. Here, we report the chemically-induced slippage of layers in bulk tungsten diselenide (WSe 2 ). Powder X-ray diffraction, Raman spectroscopy, electron microscopy, and thermal analysis suggest that slippage is easily achieved by grinding in the presence of common solvents. Chemically-induced slippage of TMDs may represent an intermediate step leading to the exfoliation of these materials. We anticipate that chemical slippage will widen the synthetic utility and advance our understanding of the mechanical and optoelectronic properties of layered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neptunium Pyridine Dipyrrolide Complexes

Two pyridine dipyrrolide neptunium(IV) complexes, ( Mes PDP Ph )NpCl 2 (THF) and Np( Mes PDP Ph ) 2 , where ( Mes PDP Ph ) 2– is the doubly deprotonated form of 2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine, have been prepared. Characterization of the complexes has been performed through a combination of solid- and solution-state methods, including single-crystal X-ray diffraction and electronic absorption and nuclear magnetic resonance spectroscopies. Collectively, these data confirm the formation of the mono- and bis-ligated species. Electrochemistry of a series of bis-ligated actinide complexes, An( Mes PDP Ph ) 2 (An = Th, U, Np), is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Demonstration of MgCr 2– x Mn x O 4 Spinel Oxide Cathodes in High-Voltage Mg Batteries

Solid-solution oxide spinels with high redox voltages and facile Mg 2+ mobility have been identified as promising candidates for practical, high-voltage cathodes in Mg batteries. In this work, we discuss the development of MgCr 2-x Mn x O 4 [x = 0.5, 1, 1.2] solid-solution spinel oxides as a cathode material and their electrochemical performance paired with an Mg anode in a full cell. This work presents the first demonstration of full cells with these materials. Mg-Cr-Mn spinel oxides with varying Cr and Mn contents were synthesized using alternative synthetic routes for optimal electrochemical performance. High-resolution synchrotron powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (NMR) spectroscopy, and electron microscopy showed that these different synthetic routes resulted in changes in structures and particle morphologies, which in turn affect the electrochemical performance. Particularly, the urea coprecipitation synthetic route resulted in high-surface-area particles that enabled lower overpotentials and increased discharge capacity. The high surface area also resulted in expedited structural degradation caused by the irreversible migration of Mg 2+ into normally vacant 16c sites in the spinel lattice. This structural degradation was lessened by using a hydrosauna-urea synthesis method, which decreased the Mg/Mn inversion ratio while retaining high-surface-area particles with good cycling performance. Furthermore, our findings highlight the necessity for high surface area or nanostructured spinel oxide cathodes with minimized Mg-Mn inversion to enable spinel oxide cathodes in Mg full cells.

Mg anode↗

Two-Step Delignification of Miscanthus To Enhance Enzymatic Hydrolysis: Aqueous Ammonia Followed by Sodium Hydroxide and Oxidants

Pretreatment of miscanthus is essential for enzymatic production of sugars to yield bioethanol. A two-step process using 10 wt % aqueous ammonia in the first step is followed by 1 wt % sodium hydroxide (with or without oxygen or 1 wt % hydrogen peroxide) in the second step. The first step retains about 90% of the cellulose and about 67% of the hemicellulose in the solid while removing about 62% of the lignin. Both steps together achieve 83-90% delignification. Subsequent enzymatic conversion to fermentable sugars is close to 90% after 96 h. While an oxidant does not significantly increase delignification, it has a favorable effect on saccharification of the recovered solid. Infrared spectroscopy, X-ray diffraction, and two-dimensional nuclear magnetic resonance spectroscopy provide data concerning the chemical composition of the recovered solid. Inclusion of an oxidant to the pretreatment breaks β-O-4'- linked aryl ether bonds of the remaining lignin in the recovered solid.

Liu, Zhongguo↗

Atomically Dispersed Copper Sites in a Metal–Organic Framework for Reduction of Nitrogen Dioxide

Metal-organic framework (MOF) materials provide an excellent platform to fabricate single-atom catalysts due to their structural diversity, intrinsic porosity, and designable functionality. However, the unambiguous identification of atomically dispersed metal sites and the elucidation of their role in catalysis are challenging due to limited methods of characterization and lack of direct structural information. Here, we report a comprehensive investigation of the structure and the role of atomically dispersed copper sites in UiO-66 for the catalytic reduction of NO 2 at ambient temperature. The atomic dispersion of copper sites on UiO-66 is confirmed by high-angle annular dark-field scanning transmission electron microscopy, electron paramagnetic resonance spectroscopy, and inelastic neutron scattering, and their location is identified by neutron powder diffraction and solid-state nuclear magnetic resonance spectroscopy. The Cu/UiO-66 catalyst exhibits superior catalytic performance for the reduction of NO 2 at 25 °C without the use of reductants. A selectivity of 88% for the formation of N2 at a 97% conversion of NO 2 with a lifetime of >50 h and an unprecedented turnover frequency of 6.1 h-1 is achieved under nonthermal plasma activation. In situ and operando infrared, solid-state NMR, and EPR spectroscopy reveal the critical role of copper sites in the adsorption and activation of NO 2 molecules, with the formation of {Cu(I)···NO} and {Cu···NO 2 } adducts promoting the conversion of NO 2 to N 2 . This study will inspire the further design and study of new efficient single-atom catalysts for NO 2 abatement via detailed unravelling of their role in catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium-Doping Stabilized High-Performance P2–Na 0.66 Li 0.18 Fe 0.12 Mn 0.7 O 2 Cathode for Sodium Ion Batteries

While sodium-ion batteries (SIBs) hold great promise for large-scale electric energy storage and low speed electric vehicles, the poor capacity retention of the cathode is one of the bottlenecks in the development of SIBs. Following a strategy of using lithium doping in the transition-metal layer to stabilize the desodiated structure, we have designed and successfully synthesized a novel layered oxide cathode P2–Na 0.66 Li 0.18 Fe 0.12 Mn 0.7 O 2 , which demonstrated a high capacity of 190 mAh g –1 and a remarkably high capacity retention of ~87% after 80 cycles within a wide voltage range of 1.5–4.5 V. Furthermore, the outstanding stability is attributed to the reversible migration of lithium during cycling and the elimination of the detrimental P2–O2 phase transition, revealed by ex situ and in situ X-ray diffraction and solid-state nuclear magnetic resonance spectroscopy.

25 ENERGY STORAGE↗

A new Cu–cysteamine complex: structure and optical properties

Here we report the structure and optical properties of a new Cu–cysteamine complex (Cu–Cy) with a formula of Cu3Cl(SR)2 (R ¼ CH2CH2NH2). This Cu–Cy has a different structure from a previous Cu–Cy complex, in which both thio and amine groups from cysteamine bond with copper ions. Single-crystal X-ray diffraction and solid-state nuclear magnetic resonance results show that the oxidation state of copper in Cu3Cl(SR)2 is +1 rather than +2. Further, Cu3Cl(SR)2 has been observed to show intense photoluminescence and X-ray excited luminescence. More interesting is that Cu3Cl(SR)2 particles can produce singlet oxygen under irradiation by light or X-ray. This indicates that Cu3Cl(SR)2 is a new photosensitizer that can be used for deep cancer treatment as X-ray can penetrate soft tissues. All these findings mean that Cu3Cl(SR)2 is a new material with potential applications for lighting, radiation detection and cancer treatment.

Ma, Lun↗

Effect of manganese substitution of ferrite nanoparticles on particle grain structure

To investigate the influence of manganese substitution on the saturation magnetization of manganese ferrite nanoparticles, samples with various compositions (Mn x Fe 3–x O 4 , x = 0, 0.25, 0.5, 0.75, and 1) were synthesized and characterized. The saturation magnetization of such materials was both calculated using density functional theory and measured via vibrating sample magnetometry. A discrepancy was found; the computational data demonstrated a positive correlation between manganese content and saturation magnetization, while the experimental data exhibited an inverse correlation. X-ray diffraction (XRD) and magnetometry results indicated that the crystallite diameter and the magnetic diameter decrease when adding more manganese, which could explain the loss of magnetization of the particles. For 20 nm nanoparticles, with increasing manganese substitution level, the crystallite size decreases from 10.9 nm to 6.3 nm and the magnetic diameter decreases from 15.1 nm to 3.5 nm. Further high resolution transmission electron microscopy (HRTEM) analysis confirmed the manganese substitution induced defects in the crystal lattice, which encourages us to find ways of eliminating crystalline defects to make more reliable ferrite nanoparticles.

36 MATERIALS SCIENCE↗

NOVEL CRYOGENIC ENGINEERING SOLUTIONS FOR THE NEW AUSTRALIAN RESEARCH REACTOR OPAL

In August 2006 the new 20MW low enriched uranium research reactor OPAL went critical. The reactor has 3 main functions, radio pharmaceutical production, silicon irradiation and as a neutron source. Commissioning on 7 neutron scattering instruments began in December 2006. Three of these instruments (Small Angle Neutron Scattering, Reflectometer and Time-of-flight Spectrometer) utilize cold neutrons.The OPAL Cold Neutron Source, located inside the reactor, is a 20L liquid deuterium moderated source operating at 20K, 330kPa with a nominal refrigeration capacity of 5 kW and a peak flux at 4.2meV (equivalent to a wavelength of 0.4nm). The Thermosiphon and Moderator Chamber are cooled by helium gas delivered at 19.8K using the Brayton cycle. The helium is compressed by two 250kW compressors (one with a variable frequency drive to lower power consumption).A 5 Tesla BSCCO (2223) horizontal field HTS magnet will be delivered in the 2{sup nd} half of 2007 for use on all the cold neutron instruments. The magnet is cooled by a pulse tube cryocooler operating at 20K. The magnet design allows for the neutron beam to pass both axially and transverse to the field. Samples will be mounted in a 4K to 800K Gifford-McMahon (GM) cryofurnace, with the ability to apply a variable electric field in-situ. The magnet is mounted onto a tilt stage. The sample can thus be studied under a wide variety of conditions.A cryogen free 7.4 Tesla Nb-Ti vertical field LTS magnet, commissioned in 2005 will be used on neutron diffraction experiments. It is cooled by a standard GM cryocooler operating at 4.2K. The sample is mounted in a 2{sup nd} GM cryocooler (4K-300K) and a variable electric field can be applied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Note: Versatile sample stick for neutron scattering experiments in high electric fields

We present a versatile high voltage sample stick that fits into all cryomagnets and standard cryostats at the Swiss Spallation Neutron Source, Paul Scherrer Institut, and which provides a low effort route to neutron scattering experiments that combine electric field with low temperature and magnetic field. The stick allows for voltages up to 5 kV and can be easily adapted for different scattering geometries. We discuss the design consideration and thermal behavior of the stick, and give one example to showcase the abilities of the device.

07 ISOTOPE AND RADIATION SOURCES↗

Direct real space observation of magneto-electronic inhomogeneity in ultra-thin film La{sub 0.5}Sr{sub 0.5}CoO{sub 3−δ} on SrTiO{sub 3}(001)

Recent magnetotransport and neutron scattering measurements implicate interfacial magneto-electronic phase separation as the origin of the degradation in transport and magnetism in ultra-thin film La{sub 1−x}Sr{sub x}CoO{sub 3} on SrTiO{sub 3}(001). Here, using low temperature scanning tunneling microscopy and spectroscopy the first direct, real space observation of this nanoscopic electronic inhomogeneity is provided. Films of thickness 12.4 nm (32 unit cells) are found to exhibit spatially uniform conductance, in stark contrast to 4.7 nm (12 unit cell) films that display rich variations in conductance, and thus local density of states. The electronic heterogeneity occurs across a hierarchy of length scales (5–50 nm), with complex correlations with both topography and applied magnetic fields. These results thus provide a direct observation of magneto-electronic inhomogeneity in SrTiO{sub 3}(001)/La{sub 0.5}Sr{sub 0.5}CoO{sub 3} at thicknesses below 6–7 nm, in good agreement with less direct techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗