Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “low-frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Small Aperture Telescopes for the Simons Observatory

The Simons Observatory (SO) is an upcoming cosmic microwave background(CMB) experiment located on Cerro Toco, Chile, that will map the microwave sky in temperature and polarization in six frequency bands spanning 27 to 285 GHz. SO will consist of one 6-meter Large Aperture Telescope (LAT) fielding∼30,000 detectors and an array of three 0.42-meter Small Aperture Telescopes (SATs) fielding an additional 30,000 detectors. This synergy will allow for the extremely sensitive characterization of the CMB over an-gular scales ranging from an arcmin to tens of degrees, enabling a wide range of scientific output. Here we focus on the SATs targeting degree angular scales with successive dichroic instruments observing at Mid-Frequency (MF: 93/145 GHz), Ultra-High-Frequency (UHF:225/285 GHz), and Low-Frequency (LF: 27/39 GHz). The three SATs will be able to map∼10% of the sky to a noise level of∼2 μK-arcmin when combining 93 and 145 GHz. The multiple frequency bands will allow the CMB to be separated from galactic foregrounds (primarily synchrotron and dust), with the primary science goal of characterizing the primordial tensor-to-scalar ratio, r, at a target level ofσ(r)≈0.003.

Small aperature telescope↗

A Comprehensive X-ray Report on AT2019wey

The Galactic low-mass X-ray binary AT2019wey (ATLAS19bcxp, SRGAJ043520.9+552226, SRGEJ043523.3+552234, ZTF19acwrvzk) was discovered as a new optical transient in Dec 2019, and independently as an X-ray transient in Mar 2020. In this paper, we present comprehensive NICER, NuSTAR, Chandra, Swift, and MAXI observations of AT2019wey from ~1 year prior to the discovery to the end of September 2020. AT2019wey appeared as a ~ 1 mCrab source and stayed at this flux density for several months, displaying a hard X-ray spectrum that can be modeled as a power-law with photon index Γ ~ 1.8. In June 2020 it started to brighten and reached ~20 mCrab in ~2 months. The inclination of this system can be constrained to I ≲ 30° by modelling the reflection spectrum. Starting from late-August (~ 59082 MJD), AT2019wey entered into the hard-intermediate state (HIMS), and underwent a few week-long timescale outbursts, where the brightening in soft X-rays is correlated with the enhancement of a thermal component. Low-frequency quasi-periodic oscillation (QPO) was observed in the HIMS. We detect no pulsation and in timing analysis of the NICER and NuSTAR data. The X-ray states and power spectra of AT2019wey are discussed against the landscape of low-mass X-ray binaries.

Individual X-rays↗

The Stochastic X-ray Variability of the Accreting Millisecond Pulsar IGR J17062-6143

This work presents an investigation of the stochastic X-ray variability from the 164 Hz accreting millisecond pulsar IGR J17062–6143, based on regular observations collected with the Neutron Star Interior Composition Explorer between 2017 July and 2020 August. Over this period, the power density spectrum showed a stable morphology, with broad ∼ 25% rms band-limited noise below 16 Hz. Quasiperiodic oscillations (QPOs) were occasionally observed, with the most notably detections including a low-frequency QPO centered at 2.7 Hz and a sharp QPO centered at 115 Hz that may be a 2:3 resonance with the spin frequency. Further, the energy dependence of the band-limited noise is studied through a spectroscopic analysis of the complex covariance in two frequency intervals. It is found that the power law continuum is the primary driver for the observed variability, although the thermal (blackbody) emission also appears to be intrinsically variable in area (5% rms) and temperature (1% rms). Notably, the 1 keV emission feature seen in all X-ray spectra of IGR J17062–6143 varies with the same amplitude as the power law, but systematically lags behind that continuum emission. These results appear consistent with a scenario in which a time variable Compton-scattering corona is the primary source for the observed stochastic variability, with the variability observed in the emission feature and at the lowest photon energies being due to the disk reflection of the power law continuum.

Petrus Bult↗

Technical Committee on Noise: Researchers and Practitioners

The Technical Committee on Noise (TCNS) includes researchers and industry practitioners interested in understanding noise generation from a variety of sources, its propagation, and its impact on structures, objects, and people. The goal of reducing the impact of this noise, i.e. unwanted sound, has led to innovative model development, measurement techniques, mitigation strategies, and input towards the establishment of regulations. Community noise definition and abatement is of particular interest and motivates the advancement of research on a variety of topics, such as transportation noise, hearing protection, jet and rocket noise, building systems noise and vibration, atmospheric sound propagation, soundscapes, and low-frequency sound. The diverse technical background of TCNS members is essential, given the interdisciplinary nature of this research, and it is mirrored in the topics of special sessions typically held jointly with other ASA technical committees.

noise↗

Daily Rainfall Estimate by Emissivity Temporal Variation from 10 Satellites

Rainfall retrieval algorithms for passive microwave radiometers often exploit the brightness temperature depression due to ice scattering at high-frequency channels (≥85 GHz) over land. This study presents an alternate method to estimate the daily rainfall amount using the emissivity temporal variation (i.e., Δe) under rain-free conditions at low-frequency channels (19, 24, and 37 GHz). Emissivity is derived from 10 passive microwave radiometers, including the Global Precipitation Measurement (GPM) Microwave Imager (GMI), the Advanced Microwave Scanning Radiometer 2 (AMSR2), three Special Sensor Microwave Imager/Sounders (SSMIS), the Advanced Technology Microwave Sounder (ATMS), and four Advanced Microwave Sounding Units-A (AMSU-A). Four different satellite combination schemes are used to derive the Δe for daily rainfall estimates. They are all 10 satellites, 5 imagers, 6 satellites with very different equator crossing times, and GMI only. Results show that Δe from all 10 satellites has the best performance with a correlation of 0.60 and RMSE of 6.52 mm, compared with the Integrated Multisatellite Retrievals for GPM (IMERG) Final run product. The 6-satellites scheme has comparable performance with the all-10-satellites scheme. The 5-imagers scheme performs noticeably worse with a correlation of 0.49 and RMSE of 7.28 mm, while the GMI-only scheme performs the worst with a correlation of 0.25 and RMSE of 11.36 mm. The inferior performance from the 5-imagers and GMI-only schemes can be explained by the much longer revisit time, which cannot accurately capture the emissivity temporal variation.

Yalei You↗

Astrophysics Milestones for Pulsar Timing Array Gravitational-wave Detection

The NANOGrav Collaboration reported strong Bayesian evidence for a common-spectrum stochastic process in its12.5 yr pulsar timing array data set, with median characteristic strain amplitude at periods of a year of A(yr) = 1.92(+0.75,-0.55) x 10^(-15). However, evidence for the quadrupolar Hellings & Downs interpulsar correlations, which are characteristic of gravitational-wave signals, was not yet significant. We emulate and extend the NANOGrav data set, injecting a wide range of stochastic gravitational-wave background(GWB)signals that encompass a variety of amplitudes and spectral shapes, and quantify three key milestones.(I)Given the amplitude measured in the 12.5 yr analysis and assuming this signal is a GWB, we expect to accumulate robust evidence of an interpulsar-correlated GWB signal with 15–17 yr of data, i.e., an additional 2–5 yr from the 12.5 yr data set.(II)At the initial detection, we expect a fractional uncertainty of 40% on the power-law strain spectrum slope, which is sufficient to distinguish a GWB of supermassive black hole binary origin from some models predicting more exotic origins.(III)Similarly, the measured GWB amplitude will have an uncertainty of 44% upon initial detection, allowing us to arbitrate between some population models of supermassive black hole binaries. In addition, power-law models are distinguishable from those having low-frequency spectral turnovers once 20 yr of data are reached. Even though our study is based on the NANOGrav data, we also derive relations that allow for a generalization to other pulsar timing array data sets. Most notably, by combining the data of individual arrays into the International Pulsar Timing Array, all of these milestones can be reached significantly earlier.

Nihan S. Pol↗

The NANOGrav 11yr Data Set: Limits on Supermassive Black Hole Binaries in Galaxies within 500 Mpc

Supermassive black hole binaries (SMBHBs) should form frequently in galactic nuclei as a result of galaxy mergers. At subparsec separations, binaries become strong sources of low-frequency gravitational waves (GWs), targeted by Pulsar Timing Arrays. We used recent upper limits on continuous GWs from the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) 11 yr data set to place constraints on putative SMBHBs in nearby massive galaxies. We compiled a comprehensive catalog of ∼44,000 galaxies in the local universe (up to redshift ∼0.05) and populated them with hypothetical binaries, assuming that the total mass of the binary is equal to the SMBH mass derived from global scaling relations. Assuming circular equal-mass binaries emitting at NANOGrav's most sensitive frequency of 8 nHz, we found that 216 galaxies are within NANOGrav's sensitivity volume. We ranked the potential SMBHBs based on GW detectability by calculating the total signal-to-noise ratio such binaries would induce within the NANOGrav array. We placed constraints on the chirp mass and mass ratio of the 216 hypothetical binaries. For 19 galaxies, only very unequal-mass binaries are allowed, with the mass of the secondary less than 10% that of the primary, roughly comparable to constraints on an SMBHB in the Milky Way. However, we demonstrated that the (typically large) uncertainties in the mass measurements can weaken the upper limits on the chirp mass. Additionally, we were able to exclude binaries delivered by major mergers (mass ratio of at least 1/4) for several of these galaxies. We also derived the first limit on the density of binaries delivered by major mergers purely based on GW data.

Zaven Arzoumanian↗

Comparing Two Weather-Robust Microphone Configurations for Outdoor Measurements

This paper discusses comparisons made between two ground-based outdoor microphone configurations. The first is known as the Compact Outdoor Unit for Ground-based Acoustical Recordings (COUGAR) and consists of an inverted microphone placed above a convex circular plate and covered by a large dome windscreen. The second configuration is the COUGARxt, where the “xt” simultaneously refers to an extra thick windscreen and an extra thin ground plate. COUGAR and COUGARxt were subjected to laboratory testing where their responses to sound were recorded at several different elevation and azimuthal angles. At almost all shown elevation angles, both configurations recorded levels that were within ±3 dB of a baseline measurement between 50 Hz – 20 kHz. At all shown azimuthal angles and over the same frequency range, both recorded levels within ±2 dB of the levels reported at an azimuthal angle of 0°, with COUGARxt having less variation than COUGAR. The configurations were also subjected to wind noise testing, where COUGARxt demonstrated superior wind noise rejection at low frequencies. The conclusion is that both configurations are suitable for outdoor acoustical measurements and that COUGARxt is the superior configuration, especially when measuring low-frequency noise.

sonic boom↗

Evaluation of Variable-Depth Liners with Slotted Cores

An initial evaluation of variable-depth, slotted-core liners fabricated with conventional, flightworthy com-ponents is presented. Liners with two distinct chamber lengths provide significant broadband absorption and their impedances are, to first order, predictable with the NASA impedance prediction code. These liners employ film caps embedded in alternating chambers to provide a near-rigid boundary condition. This enables improved control of the liner design process. A number of additively-manufactured, bent-chamber liners are also investigated to explore the e˙ects of the bend on the liner impedance. The liner impedance is negligibly a˙ected by changes to the partition width, but is significantly a˙ected by changes to the slot height. This o˙ers an option for achieving low-frequency sound absorption with relatively thin liners.

acoustic↗

Evaluation of Variable-Depth Liners with Slotted Cores

An initial evaluation of variable-depth, slotted-core liners fabricated with conventional, flightworthy components is presented. Liners with two distinct chamber lengths provide significant broadband absorption and their impedances are, to first order, predictable with the NASA impedance prediction code. These liners employ film caps embedded in alternating chambers to provide a near-rigid boundary condition. This enables improved control of the liner design process. A number of additively-manufactured, bent-chamber liners are also investigated to explore the effects of the bend on the liner impedance. The liner impedance is negligibly affected by changes to the partition width, but is significantly affected by changes to the slot height. This offers an option for achieving low-frequency sound absorption with relatively thin liners.

acoustic↗

Validation of IMERG Oceanic Precipitation over Kwajalein

The integrated Multi-satellitE Retrievals for GPM (IMERG) Version V05B and V06B precipitation products from the Global Precipitation Measurement (GPM) mission are validated against ground-based observations from the Kwajalein Polarimetric S-band Weather Radar (KPOL) deployed at Kwajalein Atoll in the central Pacific Ocean. Such a validation is particularly important as comprehensive surface measurements over the oceans are practically infeasible, which hampers the identification of possible errors, and improvement of future versions of IMERG and other satellitebased retrieval algorithms. The V05B and V06B IMERG products are validated at their native 0.1°, 30 min resolution from 2014 to 2018 based on both volumetric and categorical metrics. This validation study indicates that precipitation rates from both IMERG V05B and V06B are underestimated with respect to radar surface estimates, but the underestimation is much reduced from V05B IMERG V06B outperforms V05B with reduced systematic bias and improved precipitation detectability. The IMERG performance is further traced back to its individual sensors and morphing-based algorithms. The overall underestimation in V05B is mainly driven by the negative relative biases from morphing-based algorithms which are largely corrected in V06B. Imagers perform generally better than sounders because of the usage of low-frequency channels in imagers which can better detect emission signals by the hydrometeors. Among imagers, the GPM Microwave Imager (GMI) and Advanced Microwave Scanning Radiometer Version 2 (AMSR2) are the best, followed by Special Sensor Microwave Imager/Sounder (SSMIS). Among sounders, the Microwave Humidity Sounder (MHS) is the best, followed by Advanced Technology Microwave Sounder (ATMS) and the Sounder for Atmospheric Profiling of Humidity in the Intertropics by Radiometry (SAPHIR) for V06B. Among all categories, morph-only and IR+morph only perform better than SAPHIR. SAPHIR shows the worst performance among all categories, likely due to its limited channel selection. It is envisaged that these results will improve our understanding of IMERG performance over oceans and aid in the improvement of future versions of IMERG.

KPOL↗

NASA Engineering and Safety Center Technical Bulletin No. 15-03: Best Practices for Use of Sine Vibration Testing

Sine Vibration (SV) Testing involves subjecting the test article to a swept sine input over a frequency range (typically 5-100 Hz) to replicate the low-frequency launch environment. This test method is used for various purposes on a structural model but mainly on flight articles. The SV levels are derived from measured flight data or based on interface acceleration levels from coupled loads analysis (CLA). A logarithmic sweep rate is typically used to excite a constant time interval per bandwidth for the test (e.g., 2 or 4 octave/min), which is intended to simulate sustained sine and transient events that occur during launch. Risks can be mitigated through best practices.

Best Practices↗

Dual-low frequency radar for soil moisture under vegetation at at-depth

To address a key science research topic for the global water and energy cycle, namely measuring soil moisture under substantial vegetation canopies and to useful depths, we have developed a concept for a synthetic aperture radar (SAR) system operating simultaneously at UHF and VHF frequencies. We are currently prototyping key technology items that enable this concept under the NASA Earth Science Technology Office (ESTO) Instrument Incubator Program (IIP). This presentation describes the technological challenges and innovations we are addressing to enable the implementation of this instrument and its integration into a future Earth-orbiting mission.

soil moisture low-frequency SAR deployable mech du↗