Dynamic Spin Correlations in the Honeycomb Lattice Na 2 IrO 3 Measured by Resonant Inelastic x-Ray Scattering
Not Available
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
SEARCH · Engineering Papers
Results for “liquid crystals”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unravelling crystal growth of nanoparticles
Crystal growth from nanoscale constituents is a ubiquitous phenomenon in biology, geology and materials science. Numerous studies have focused on understanding the onset of nucleation and on producing high-quality crystals by empirically sampling constituents with different attributes and varying the growth conditions. However, the kinetics of post-nucleation growth processes, an important determinant of crystal morphology and properties, have remained underexplored due to experimental challenges associated with real-space imaging at the nanoscale. Here we report the imaging of the crystal growth of nanoparticles of different shapes using liquid-phase transmission electron microscopy, resolving both lateral and perpendicular growth of crystal layers by tracking individual nanoparticles. We observe that these nanoscale systems exhibit layer-by-layer growth, typical of atomic crystallization, as well as rough growth prevalent in colloidal systems. Surprisingly, the lateral and perpendicular growth modes can be independently controlled, resulting in two mixed crystallization modes that, until now, have received only scant attention. Combining analytical considerations with molecular dynamics and kinetic Monte Carlo simulations, we develop a comprehensive framework for our observations, which are fundamentally determined by the size and shape of the building blocks. Furthermore, these insights unify the understanding of crystal growth across four orders of magnitude in particle size and suggest novel pathways to crystal engineering.
Imaging techniques↗
Crystallization of amorphous water ice in the solar system
Electron diffraction studies of vapor-deposited water ice have characterized the dynamical structural changes during crystallization that affect volatile retention in cometary materials. Crystallization is found to occur by nucleation of small domains, while leaving a significant part of the amorphous material in a slightly more relaxed amorphous state that coexists metastably with cubic crystalline ice. The onset of the amorphous relaxation is prior to crystallization and coincides with the glass transition. Above the glass transition temperature, the crystallization kinetics are consistent with the amorphous solid becoming a "strong" viscous liquid. The amorphous component can effectively retain volatiles during crystallization if the volatile concentration is approximately 10% or less. For higher initial impurity concentrations, a significant amount of impurities is released during crystallization, probably because the impurities are trapped on the surfaces of micropores. A model for crystallization over long timescales is described that can be applied to a wide range of impure water ices under typical astrophysical conditions if the fragility factor D, which describes the viscosity behavior, can be estimated.
NASA Center ARC↗
Performance of a liquid nitrogen cryostat setup for the study of nuclear recoils in undoped CsI crystals
Not provided.
Instruments & Instrumentation↗
Noninvasive Fluid Level Sensor for Organometallic Sources
Two ultrasonic methods available for measuring level of organometallic liquid in stainless-steel (or other homogeneous solid) container. Methods require no disassembly or weighing of container. Commercially available ultrasonic flaw detectors, some of which have digital readouts and computer interfaces, used in techniques. Both methods used in crystal growth to determine level of liquids contained in sealed, opaque containers.
Gerdes, W.↗
Solvent-driven aqueous separations for hypersaline brine concentration and resource recovery
Solvent-driven separation processes can extract water and high-value minerals from high salinity or contaminated brines, simultaneously reducing the environmental impact of brine disposal and enabling resource recovery. The efficient dewatering of hypersaline brines is essential for the sustainable minimal and zero liquid discharge processing of industrial wastewaters. Fractional crystallization can selectively extract ions from contaminated waste streams, allowing critical materials to be recycled, including transition and lanthanide metals required for renewable energy generation and storage. Mass transfer in solvent-driven water extraction occurs across a liquid–liquid interface, eliminating the scaling and fouling of membrane and heat exchanger surfaces and limiting the need for extensive pretreatment. Solvent-driven fractional crystallization can leverage sequential treatment and control of process conditions to rapidly recover salts without requiring evaporation of water. Despite promising applications, the principles and potential of solvent-driven aqueous separations remain poorly understood. This critical review explores the opportunities presented by solvent-based aqueous separations from the molecular to process scale, evaluating the chemistry of solvation and system design in the broader context of desalination, resource recovery, water softening, and mineral production.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fixed-target serial femtosecond crystallography using in cellulo grown microcrystals
The crystallization of recombinant proteins in living cells is an exciting new approach in structural biology. Recent success has highlighted the need for fast and efficient diffraction data collection, optimally directly exposing intact crystal-containing cells to the X-ray beam, thus protecting the in cellulo crystals from environmental challenges. Serial femtosecond crystallography (SFX) at free-electron lasers (XFELs) allows the collection of detectable diffraction even from tiny protein crystals, but requires very fast sample exchange to utilize each XFEL pulse. Here, an efficient approach is presented for high-resolution structure elucidation using serial femtosecond in cellulo diffraction of micometre-sized crystals of the protein HEX-1 from the fungus Neurospora crassa on a fixed target. Employing the fast and highly accurate Roadrunner II translation-stage system allowed efficient raster scanning of the pores of micro-patterned, single-crystalline silicon chips loaded with living, crystal-containing insect cells. Compared with liquid-jet and LCP injection systems, the increased hit rates of up to 30% and reduced background scattering enabled elucidation of the HEX-1 structure. Using diffraction data from only a single chip collected within 12 min at the Linac Coherent Light Source, a 1.8 Å resolution structure was obtained with significantly reduced sample consumption compared with previous SFX experiments using liquid-jet injection. This HEX-1 structure is almost superimposable with that previously determined using synchrotron radiation from single HEX-1 crystals grown by sitting-drop vapour diffusion, validating the approach. This study demonstrates that fixed-target SFX using micro-patterned silicon chips is ideally suited for efficient in cellulo diffraction data collection using living, crystal-containing cells, and offers huge potential for the straightforward structure elucidation of proteins that form intracellular crystals at both XFELs and synchrotron sources.
Lahey-Rudolph, J. Mia (ORCID:0000000152797267)↗
Effects of tacticity and chiral center-to-dipole distance on mesogen-free liquid crystalline self-assembly of sulfonyl-containing comb-like polymers
In this report, new approaches were implemented to achieve novel ferroelectric liquid crystalline self-assembly in mesogen-free comb-like isotactic polyoxypropylenes (iPOPs) bearing mono- or di-sulfonyl groups, which have potential to exhibit high spontaneous polarization for applications in advanced electronic devices. iPOPs with n-alkylsulfonylpentylthioether side chains (iPOP-SC 5 SO 2 C n , where C n is the alkyl tail with n being either 12 or 8) were prepared via a post-polymerization substitution reaction from isotactic poly[(R)-(–)-epichlorohydrin]. Here, the effects of main-chain tacticity, chiral center-to-dipole distance, number of sulfonyl dipoles per side chain, and n-alkyl tail length on the liquid crystalline self-assembly behavior were investigated by comparing iPOPs with their atactic counterparts. First, when the sulfonyl dipole was placed far away from the chiral center in iPOP-SC 5 SO 2 C n compared with our previously reported isotactic polyethers with n-alkylsulfonyl side chains (iPOP-SO 2 C n ), the dipole–dipole interactions among the side chains decreased, which led to more liquid crystalline phases. Smectic E (SmE) and A (SmA) phases were observed after crystal melting; however, the main-chain chiral center was found to have an insignificant effect on the liquid crystalline assembly when compared to the atactic samples. Second, the longer C n tails increased the transition temperatures as a result of stronger van der Waals interactions. Third, after the thioether linkage in the side chain was oxidized into the sulfonyl group, the chiral center–dipole and dipole–dipole interactions in the resultant polymers (i.e., iPOP-SO 2 C 5 SO 2 C n ) enhanced. As a result, the liquid crystalline phase transitions (i.e., crystal → SmE → SmA → I) were pushed to higher temperatures. The knowledge gained in this study will help us further design and achieve the ferroelectric smectic C* phase in mesogen-free comb-like sulfonylated liquid crystalline polymers.
36 MATERIALS SCIENCE↗
Directionally Solidified Ceramics Produced
Produced Multiphase, interpenetrating structures are an alternative route to obtaining structural ceramic materials with adequate strength, toughness, and stability for high-temperature aerospace applications. The eutectic architecture, a continuous-reinforcing phase within a higher volume phase or matrix, can be described as a naturally occurring, in situ composite. The phases of a eutectic are thermodynamically compatible at high homologous temperatures. Strong and stable materials have been produced. Toughness, however, remains a technical obstacle. The potential for producing materials with enhanced toughness along with adequate strength and stability was demonstrated using the laser-heated float zone (LHFZ) growth method at the NASA Glenn Research Center at Lewis Field. LHFZ growth at Glenn provides a means to efficiently produce and record the underlying growth phenomena associated with two-phase structures. To initiate directional solidification, a seed of single-crystal sapphire (<0001> direction) was lowered onto the molten liquid until wetting occurred and then withdrawn at a constant rate. Neither the crystal nor the source rod was rotated. The materials produced were tested mechanically in tension, and the resulting microstructure was examined with a scanning electron microscope. Both the inherent properties of the constituent phases and the properties of the interface between them affect the mechanical behavior and the fracture surfaces. The following scanning electron micrographs show the microstructures of two different materials that were tested to failure in tension. In the left micrograph, the flat fracture surface is typical of a material that is strong but has low toughness. In the right micrograph, the crack is effectively deflected at the interface between the two phases, achieving higher toughness at moderately lower strength levels. Conducting mechanical tests to determine the high temperature properties of these materials is the next step in determining their eventual suitability.
Farmer, Serene C.↗
Crystal Growth in the SUBSA furnace in MSG: 2002 to 2022
In 2002, the investigation “Solidification Using a Baffle In Sealed Ampoules (SUBSA)” was the first investigation to utilize the Microgravity Science Glovebox (MSG) Facility on the International Space Station (ISS). The SUBSA furnace was designed for growth of indium antimonide. It features a transparent section, which allows a side view of the melt, the solid-liquid (SL) interface and the growing crystal. In 2002, four Te-doped and three Zn-doped InSb crystals were grown in microgravity. Subsequently, the SUBSA furnace was used in several materials science investigations, including growing the radiation detector materials, InI and Cs2LiYCl6:Ce from the melt and vapor phase (2017 to 2019) and “Brazing of Aluminum alloys in Space (BRAINS)”. A review of the SUBSA furnace features and parameters will be presented, including the design of the growth ampoules, charge preparation, and the procedures used to grow InSb (in 2002) and InI (in 2019).
Aleksandar Ostrogorsky↗
Crystal Growth in the SUBSA furnace at the International Space Station (ISS)
In 2002, our investigation Solidification Using a Baffle In Sealed Ampoules (SUBSA) was the first investigation to utilize the Microgravity Science Glovebox (MSG) Facility on the International Space Station (ISS). The SUBSA furnace was designed for growth of indium antimonide. It features a transparent section, which allows a side view of the melt, the solid-liquid (SL) interface and the growing crystal. In 2002, four Te- doped and three Zn-doped InSb crystals were grown in microgravity. Subsequently, the SUBSA furnace was used in several other materials science investigations, including growing the radiation detector materials InI and Cs2LiYCl6:Ce from the melt and vapor phase (2017 to 2019) and Brazing of Aluminum alloys in Space (BRAINS). A review of the SUBSA furnace features and parameters will be presented, including the design of the growth ampoules, charge preparation, and the procedures used to grow InSb (in 2002) and InI (in 2019).
A.G. Ostrogorsk↗
Experimental study of pyroxene-liquid interaction in quartz-normative basalt 15597
Equilibrium and controlled cooling rate experiments on a synthetic analog of Apollo 15 quartz normative basalt 15597 are reported. While the partitioning of the major elements Ca, Mg, and Fe between pyroxene and liquid is rate independent, the K sub D parameter for Fe/Mg, which is calculated for low-Ca pyroxene, is temperature dependent. It is suggested that chemical trends observed in lunar pyroxenes are a consequence of three rate processes. The processes are (1) rate-dependent suppression of crystallization of other phases until lower temperature alters liquid composition and, therefore, the composition of the pyroxene that crystallizes; (2) the efficiency of fractional crystallization and the extent of crystal zoning are rate dependent; and (3) the partitioning of Al2O3, TiO2, and Cr2O3 between pyroxene and liquid depends on cooling rate.
Grove, T. L.↗
Mobility of a spatially modulated electron liquid on the helium surface
Here, we present the results of large-scale numerical simulations of the mobility of a two-dimensional electron liquid on the helium surface in the presence of a one-dimensional periodic potential. Even where the potential is much weaker than the electron-electron interaction, it can strongly change the mobility. The effect depends on the interrelation between the potential period and the mean interelectron distance. It is most pronounced where the period is close to the period of the Wigner crystal that would form if the liquid were cooled to a lower temperature. The results suggest, in particular, that the correlation length in the electron liquid can be found by measuring the mobility in a weak periodic potential. The simulations are based on the microscopic model of the electron scattering by the excitations in helium.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Development of liquid handling techniques in microgravity
A large number of experiments dealing with protein crystal growth and also with growth of crystals from solution require complicated fluid handling procedures including filling of empty containers with liquids, mixing of solutions, and stirring of liquids. Such procedures are accomplished in a straight forward manner when performed under terrestrial conditions in the laboratory. However, in the low gravity environment of space, such as on board the Space Shuttle or an Earth-orbiting space station, these procedures sometimes produced entirely undesirable results. Under terrestrial conditions, liquids usually completely separate from the gas due to the buoyancy effects of Earth's gravity. Consequently, any gas pockets that are entrained into the liquid during a fluid handling procedure will eventually migrate towards the top of the vessel where they can be removed. In a low gravity environment any folded gas bubble will remain within the liquid bulk indefinitely at a location that is not known a priori resulting in a mixture of liquid and vapor.
Antar, Basil N.↗
Interpretation of Ferroan Anorthosite Ages and Implications for the Lunar Magma Ocean
Ferroan Anorthosites (FANs) are considered to have purportedly crystallized directly from the lunar magma ocean (LMO) as a flotation crust. LMO modeling suggests that such anorthosites started to form only after greater than 70 percent of the LMO had crystallized. Recent age dates for FANs have questioned this hypothesis as they span too large of an age range. This means a younger age for the Moon-forming giant impact or the LMO hypothesis is flawed. However, FANs are notoriously difficult to age-date using the isochron method. We have proposed a mechanism for testing the LMO hypothesis through using plagioclase trace element abundances to calculate equilibrium liquids and compare them with LMO crystallization models. We now examine the petrography of the samples that have Sm-Nd (Samarium-Neodymium) age dates (Rb-Sr (Rubidium-Strontium) isotopic systematics may have been disturbed) and propose a relative way to age date FANs.
Neal, C. R.↗
An Investigation of Glaciated Cloud Capabilities in the NASA Glenn Icing Research Tunnel
In 2015 the FAA added Appendix D to Part 33 engine certification requirements that included Mixed Phase and Ice Crystal Icing to aircraft engine certification. Replicating the ice crystal environment that is seen in nature has proven to be a challenge, which multiple engine ground testing facilities and icing wind tunnels have achieved to varying degrees. The Icing Research Tunnel (IRT) at NASA Glenn has always been focused on super-cooled liquid water to produce FAA Part 23 and Part 25 regulations, targeting Appendix C and lately also Appendix O. However, due to a growing interest in the field of ice crystals and the high cost of operating engine icing facilities, the IRT staff have recently completed testing using the Multi-Element Sensor (also known as the multi-wire) to measure glaciated cloud conditions. Results indicate that turning off the heat to the nozzle air and water supply can create a stable, fully glaciated cloud in the test section for a small range of conditions: drop-size distribution values below 20 microns (median volumetric diameter), air temperatures as warm as -7 deg C, and airspeeds between 100 and 250 knots. These tests also revealed how varying the total temperature, airspeed, nozzle air pressure, and nozzle water pressure affect the glaciation of the IRT cloud.
ice water content↗
Liquid-Liquid Phase Separation in Supersaturated Lysozyme Solutions and Associated Precipitate Formation/Crystallization
Using cloud point determinations, the phase boundaries (binodals) for metastable liquid-liquid (L-L) separation in supersaturated hen egg white lysozyme solutions with 3%, 5%, and 7% (wlv) NaCl at pH= 4.5 and protein concentrations c between 40 and 400 mg/ml were determined. The critical temperature for the binodal increased approximately linearly with salt concentration. The coexisting liquid phases both remained supersaturated but differed widely in protein concentration. No salt repartitioning was observed between the initial and the two separated liquid phases. After the L-L separation, due to the presence of the high protein concentration phase, crystallization occurred much more rapidly than in the initial solution. At high initial protein concentrations, a metastable gel phase formed at temperatures above the liquid binodal. Both crystal nucleation and gel formation were accelerated in samples that had been cycled through the binodal. Solutions in the gel and L-L regions yielded various types of precipitates. Based on theoretical considerations, previous observations with other proteins, and our experimental results with lysozyme, a generic phase diagram for globular proteins is put forth. A limited region in the (T,c) plane favorable for the growth of protein single crystals is delineated.
Muschol, Martin↗
Comparisons of Cloud In-Situ Microphysical Properties of Deep Convective Clouds to Appendix D/P using Data from the HAIC-HIWC and HIWC-RADAR I Flight Campaigns
In-situ cloud data from three international flight campaigns are compared to the Federal Aviation Administration Title 14 Code of Federal Regulations Part 33 Appendix D mixed-phase/glaciated environmental envelope, and the corresponding identical European Aviation Safety Agency CS-25 Appendix P envelope. The appendices consist of a temperature-altitude envelope, a 99th percentile total water content envelope at the 17.4 Nm distance scale, a distance factor for estimation at other distance scales, ice crystal median mass diameter, and recommended liquid water content levels in mixed-phase icing conditions. The data were collected during 54 flights out of one subtropical and two tropical locations, with 472 runs from about 17,000’ to 39,000’ in approximately 115 clouds. The campaigns provide about 29,600 Nm of in situ data in deep convection over four targeted temperature intervals: -10, -30, -40, and -50, all ± 5 C. The dataset is a modern and unique documentation of the ice crystal icing environment, and results described in this article will contribute to regulatory and industry assessment of Appendices D and P.
Ice Crystal Icing↗