Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “intermittency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Fast wave evanescence in filamentary boundary plasmas

Radio frequency waves for heating and current drive of plasmas in tokamaks and other magnetic confinement devices must first traverse the scrape-off-layer (SOL) before they can be put to their intended use. The SOL plasma is strongly turbulent and intermittent in space and time. These turbulent properties of the SOL, which are not routinely taken into account in wave propagation codes, can have an important effect on the coupling of waves through an evanescent SOL or edge plasma region. The effective scale length for fast wave (FW) evanescence in the presence of short-scale field-aligned filamentary plasma turbulence is addressed in this paper. It is shown that although the FW wavelength or evanescent scale length is long compared with the dimensions of the turbulence, the FW does not simply average over the turbulent density; rather, the average is over the exponentiation rate. Implications for practical situations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The evidence of cathodic micro-discharges during plasma electrolytic oxidation process

Plasma electrolytic oxidation (PEO) processing of EV31 magnesium alloy has been carried out in fluoride containing electrolyte under bipolar pulse current regime. Unusual PEO cathodic micro-discharges have been observed and investigated. It is shown that the cathodic micro-discharges exhibit a collective intermittent behavior, which is discussed in terms of charge accumulations at the layer/electrolyte and layer/metal interfaces. Optical emission spectroscopy is used to determine the electron density (typ. 10{sup 15} cm{sup −3}) and the electron temperature (typ. 7500 K) while the role of F{sup −} anions on the appearance of cathodic micro-discharges is pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microcantilevers with embedded accelerometers for dynamic atomic force microscopy

The measurement of the intermittent interaction between an oscillating nanotip and the sample surface is a key challenge in dynamic Atomic Force Microscopy (AFM). Accelerometers integrated onto AFM cantilevers can directly measure this interaction with minimal cantilever modification but have been difficult to realize. Here, we design and fabricate high frequency bandwidth accelerometers on AFM cantilevers to directly measure the tip acceleration in commercial AFM systems. We demonstrate a simple way of calibrating such accelerometers and present experiments using amplitude modulated AFM on freshly cleaved mica samples in water to study the response of the accelerometer.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Distortion of power law blinking with binning and thresholding

Fluorescence intermittency is a random switching between emitting (on) and non-emitting (off) periods found for many single chromophores such as semiconductor quantum dots and organic molecules. The statistics of the duration of on- and off-periods are commonly determined by thresholding the emission time trace of a single chromophore and appear to be power law distributed. Here we test with the help of simulations if the experimentally determined power law distributions can actually reflect the underlying statistics. We find that with the experimentally limited time resolution real power law statistics with exponents α{sub on/off} ≳ 1.6, especially if α{sub on} ≠ α{sub off} would not be observed as such in the experimental data after binning and thresholding. Instead, a power law appearance could simply be obtained from the continuous distribution of intermediate intensity levels. This challenges much of the obtained data and the models describing the so-called power law blinking.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lithium intercalation in sputter deposited antimony-doped tin oxide thin films: Evidence from electrochemical and optical measurements

Transparent conducting oxides are used as transparent electrical contacts in a variety of applications, including in electrochromic smart windows. In the present work, we performed a study of transparent conducting antimony-doped tin oxide (ATO) thin films by chronopotentiometry in a Li{sup +}-containing electrolyte. The open circuit potential vs. Li was used to investigate ATO band lineups, such as those of the Fermi level and the ionization potential, as well as the dependence of these lineups on the preparation conditions for ATO. Evidence was found for Li{sup +} intercalation when a current pulse was set in a way so as to drive ions from the electrolyte into the ATO lattice. Galvanostatic intermittent titration was then applied to determine the lithium diffusion coefficient within the ATO lattice. The electrochemical density of states of the conducting oxide was studied by means of the transient voltage recorded during the chronopotentiometry experiments. These measurements were possible because, as Li{sup +} intercalation took place, charge compensating electrons filled the lowest part of the conduction band in ATO. Furthermore, the charge insertion modified the optical properties of ATO according to the Drude model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The intensity of forbidden torsional transitions in electronic spectra of molecules with a 6-fold barrier: Application to toluenes

Franck-Condon forbidden transitions involving methyl rotor modes are seen in the S{sub 1} ← S{sub 0} spectrum of toluene and toluene-like molecules. The strongest of these rotor transitions (m{sup ″} = 1 → m{sup ′} = 2, m{sup ″} = 0 → m{sup ′} = 3a{sub 1}{sup ″}, and m{sup ″} = 1 → m{sup ′} = 4) have been shown by Walker et al. [J. Chem. Phys. 102, 8718 (1995)] to gain intensity through the rotor equivalent of the Herzberg-Teller mechanism. Despite the m{sup ″} = 0 → m{sup ′} = 3a{sub 2}{sup ″} transition being forbidden in this formalism, it is sporadically observed. We show that this transition derives oscillator strength from incomplete mixing of the −3 and +3 free rotor basis states due to torsion-rotation coupling. Calculations demonstrate that this mechanism quantitatively explains the intensities observed for toluene, including their temperature dependence. Because the −3/+3 mixing is weakest when the torsional barrier height, V{sub 6}, is small, the m{sup ″} = 0 → m{sup ′} = 3a{sub 2}{sup ″} transition increases in intensity as |V{sub 6}| decreases. The temperature and |V{sub 6}| dependencies explain why reports of the 0 → 3a{sub 2}{sup ″} transition have been intermittent. The torsion-rotation coupling mechanism is predicted to also give significant intensity to m = 0 → m = 6a{sub 2}{sup ′} transitions relative to m = 0 → m = 6a{sub 1}{sup ′} transitions and to provide intensity to 0 → 3a{sub 2} transitions in molecules with a 3-fold (V{sub 3}) barrier. Comparison between the observed and calculated rotor band contours shows, unexpectedly, that the 3a{sub 1}{sup ″} constants fail to predict the 3a{sub 2}{sup ″} contour despite these two states being derived from the same free rotor basis states. Comparison with the observed spectrum also reveals differences in the separation of the S{sub 1} 3a{sub 2}{sup ″} and 3a{sub 1}{sup ″} levels. The V{sub 6} value determined from analysis of the high resolution, rotationally resolved m{sup ″} = 0 → m{sup ′} = 3a{sub 1}{sup ″} spectrum overestimates the 3a{sub 2}{sup ″}–3a{sub 1}{sup ″} separation by 0.6 cm{sup −1}. We postulate that this may be due to torsion-vibration coupling. The observed toluene torsion-rotation contours have been modeled to provide estimates of the rotational constants for several of the torsional states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of supersonic molecular-beam injection on edge fluctuation and particle transport in Heliotron J

Edge fluctuation in a supersonic molecular-beam injection (SMBI) fueled plasma has been measured using an electrostatic probe array. After SMBI, the plasma stored energy (W{sub p}) temporarily decreased then started to increase. The local plasma fluctuation and fluctuation induced particle transport before and after SMBI have been analyzed. In a short duration (∼4 ms) just after SMBI, the density fluctuation of broad-band low frequency increased, and the probability density function (PDF) changed from a nearly Gaussian to a positively skewed non-Gaussian one. This suggests that intermittent structures were produced due to SMBI. Also the fluctuation induced particle transport was greatly enhanced during this short duration. About 4 ms after SMBI, the low frequency broad-band density fluctuation decreased, and the PDF returned to a nearly Gaussian shape. Also the fluctuation induced particle transport was reduced. Compared with conventional gas puff, W{sub p} degradation window is very short due to the short injection period of SMBI. After this short degradation window, fluctuation induced particle transport was reduced and W{sub p} started the climbing phase. Therefore, the short period of the influence to the edge fluctuation might be an advantage of this novel fueling technique. On the other hand, although their roles are not identified at present, coherent MHD modes are also suppressed as well by the application of SMBI. These MHD modes are thought to be de-exited due to a sudden change of the edge density and/or excitation conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy dissipation by whistler turbulence: Three-dimensional particle-in-cell simulations

Three-dimensional particle-in-cell simulations of whistler turbulence are carried out on a collisionless, homogeneous, magnetized plasma model. The simulations use an initial ensemble of relatively long wavelength whistler modes and follow the temporal evolution of the fluctuations as they cascade into a broadband, anisotropic, turbulent spectrum at shorter wavelengths. For relatively small levels of the initial fluctuation energy ϵ{sub e}, linear collisionless damping provides most of the dissipation of the turbulence. But as ϵ{sub e} and the total dissipation increase, linear damping becomes less important and, especially at β{sub e} ≪ 1, nonlinear processes become stronger. The PDFs and kurtoses of the magnetic field increments in the simulations suggest that intermittency in whistler turbulence generally increases with increasing ϵ{sub e} and β{sub e}. Correlation coefficient calculations imply that the current structure dissipation also increases with increasing ϵ{sub e} and β{sub e}, and that the nonlinear dissipation processes in these simulations are primarily associated with regions of localized current structures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical study of transition to supersonic flows in the edge plasma

The plasma scrape-off layer (SOL) in a tokamak is characterized by ion flow down a long narrow flux tube terminating on a solid surface. The ion flow velocity along a magnetic field line can be equal to or greater than sonic at the entrance of a Debye sheath or upstream in the presheath. This paper presents a numerical study of the transition between subsonic and supersonics flows. A quasineutral one-dimensional (1D) fluid code has been used for modeling of plasma transport in the SOL along magnetic field lines, both in steady state and under transient conditions. The model uses coupled equations for continuity, momentum, and energy balance with ionization, radiation, charge exchange, and recombination processes. The recycled neutrals are described in the diffusion approximation. Standard Bohm sheath criterion is used as boundary conditions at the material surface. Three conditions conducive for the generation of supersonic flows in SOL plasmas have been explored. It is found that in steady state high (attached) and low (detached) divertor temperatures cases, the role of particle, momentum, and energy loss is critical. For attached case, the appearance of shock waves in the divertor region if the incoming plasma flow is supersonic and its effect on impurity retention is presented. In the third case, plasma expansion along the magnetic field can yield time-dependent supersonic solutions in the quasineutral rarefaction wave. Such situations can arise in the parallel transport of intermittent structures such as blobs and edge localized mode filaments along field lines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of chaos on plasma filament dynamics and turbulence in the scrape-off layer

Naturally occurring error fields as well as resonant magnetic perturbations applied for stability control are known to cause magnetic field-line chaos in the scrape-off layer (SOL) region of tokamaks. Here, 2D simulations with the BOUT++ simulation framework are used to investigate the effect of the field-line chaos on the SOL and in particular on its width and peak particle flux. The chaos enters the SOL dynamics only through the connection length, which is evaluated using a Poincaré map. The variation of experimentally relevant quantities, such as the SOL gradient length scale and the intermittency of the particle flux in the SOL, is described as a function of the strength of the magnetic perturbation. It is found that the effect of the chaos is to broaden the profile of the sheath-loss coefficient, which is proportional to the inverse connection length. That is, the SOL transport in a chaotic field is equivalent to that in a model where the sheath-loss coefficient is replaced by its average over the unperturbed flux surfaces. The model does not include the effects of chaotic features other than the parallel connection length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydration shell effects in the relaxation dynamics of photoexcited Fe-II complexes in water

We study the relaxation dynamics of photoexcited Fe-II complexes dissolved in water and identify the relaxation pathway which the molecular complex follows in presence of a hydration shell of bound water at the interface between the complex and the solvent. Starting from a low-spin state, the photoexcited complex can reach the high-spin state via a cascade of different possible transitions involving electronic as well as vibrational relaxation processes. By numerically exact path integral calculations for the relaxational dynamics of a continuous solvent model, we find that the vibrational life times of the intermittent states are of the order of a few ps. Since the electronic rearrangement in the complex occurs on the time scale of about 100 fs, we find that the complex first rearranges itself in a high-spin and highly excited vibrational state, before it relaxes its energy to the solvent via vibrational relaxation transitions. By this, the relaxation pathway can be clearly identified. We find that the life time of the vibrational states increases with the size of the complex (within a spherical model), but decreases with the thickness of the hydration shell, indicating that the hydration shell acts as an additional source of fluctuations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Discriminating chaotic and stochastic dynamics through the permutation spectrum test

In this paper, we propose a new heuristic symbolic tool for unveiling chaotic and stochastic dynamics: the permutation spectrum test. Several numerical examples allow us to confirm the usefulness of the introduced methodology. Indeed, we show that it is robust in situations in which other techniques fail (intermittent chaos, hyperchaotic dynamics, stochastic linear and nonlinear correlated dynamics, and deterministic non-chaotic noise-driven dynamics). We illustrate the applicability and reliability of this pragmatic method by examining real complex time series from diverse scientific fields. Taking into account that the proposed test has the advantages of being conceptually simple and computationally fast, we think that it can be of practical utility as an alternative test for determinism.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analysis of cancellation exponents in two-dimensional Vlasov turbulence

Statistical properties of plasma turbulence are investigated by means of two-dimensional Vlasov simulations. In particular, a classical technique called signed measure is used to characterize the scaling behavior and the topology of sign-oscillating structures in simulations of the hybrid Vlasov-Maxwell model. Exploring different turbulence regimes, varying both the plasma β and the level of fluctuations, it is observed that Vlasov turbulence manifests two ranges with different exponents, the transition being observed near the ion skin depth. These results, which may have applications to both laboratory and astrophysical systems, further confirm the singular nature of small scale fluctuations in a plasma, mainly classified as intermittent, narrow, and intense current sheets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure functions and applicability of Yaglom's relation in passive-scalar turbulent mixing at low Schmidt numbers with uniform mean gradient

An extensive direct numerical simulation database over a wide range of Reynolds and Schmidt numbers is used to examine the Schmidt number dependence of the structure function of passive scalars and the applicability of the so-called Yaglom's relation in isotropic turbulence with a uniform mean scalar gradient. For the moderate Reynolds numbers available, the limited range of scales in scalar fields of very low Schmidt numbers (as low as 1/2048) is seen to lead to weaker intermittency, and weaker alignment between velocity gradients and principal strain rates. Strong departures from both Obukhov-Corrsin scaling for second-order structure functions and Yaglom's relation for the mixed velocity-scalar third-order structure function are observed. Finally, evaluation of different terms in the scalar structure function budget equation assuming statistical stationarity in time shows that, if the Schmidt number is very low, at intermediate scales production and diffusion terms (instead of advection) are major contributors in the balance against dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards reproducible, scalable lateral molecular electronic devices

An approach to reproducibly fabricate molecular electronic devices is presented. Lateral nanometer-scale gaps with high yield are formed in Au/Pd nanowires by a combination of electromigration and Joule-heating-induced thermomechanical stress. The resulting nanogap devices are used to measure the electrical properties of small numbers of two different molecular species with different end-groups, namely 1,4-butane dithiol and 1,5-diamino-2-methylpentane. Fluctuations in the current reveal that in the case of the dithiol molecule devices, individual molecules conduct intermittently, with the fluctuations becoming more pronounced at larger biases.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Operation of ohmic Ti/Al/Pt/Au multilayer contacts to GaN at 600 °C in air

The high-temperature characteristics (at 600 °C) of Ti/Al/Pt/Au multilayer contacts to gallium nitride (GaN) in air are reported. Microfabricated circular-transfer-line-method test structures were subject to 10 h of thermal storage at 600 °C. Intermittent electrical characterization during thermal storage showed minimal variation in the contact resistance after 2 h and that the specific contact resistivity remained on the order of 10{sup −5} Ω-cm{sup 2}. In addition, the thermally stored multilayer contacts to GaN showed ohmic I-V characteristics when electrically probed at 600 °C. The microstructural analysis with atomic force microscopy showed minimal changes in surface roughness after thermal storage. Observations of the thermochemical reactions after thermal storage using Auger electron spectroscopy chemical depth profiling showed diffusion of Pt and minimal additional Al oxidation. The results support the use of Ti/Al/Pt/Au multilayer metallization for GaN-based sensors and electronic devices that will operate within a high-temperature and oxidizing ambient.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Implementation of optimum solar electricity generating system

Under the 10{sup th} Malaysian Plan, the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015, which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia, harnessing technologies related to solar energy resources have great potential for implementation. However, the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time, and there is a need for electrical energy storage system, so that there is electricity available during the night time as well. The meteorological condition such as clouds, haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol, which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper, the technical aspects of the implementation of optimum SEGS is discussed, especially pertaining to the positioning of the PV panels.

14 SOLAR ENERGY↗

Electron vortex magnetic holes: A nonlinear coherent plasma structure

We report the properties of a novel type of sub-proton scale magnetic hole found in two dimensional particle-in-cell simulations of decaying turbulence with a guide field. The simulations were performed with a realistic value for ion to electron mass ratio. These structures, electron vortex magnetic holes (EVMHs), have circular cross-section. The magnetic field depression is associated with a diamagnetic azimuthal current provided by a population of trapped electrons in petal-like orbits. The trapped electron population provides a mean azimuthal velocity and since trapping preferentially selects high pitch angles, a perpendicular temperature anisotropy. The structures arise out of initial perturbations in the course of the turbulent evolution of the plasma, and are stable over at least 100 electron gyroperiods. We have verified the model for the EVMH by carrying out test particle and PIC simulations of isolated structures in a uniform plasma. It is found that (quasi-)stable structures can be formed provided that there is some initial perpendicular temperature anisotropy at the structure location. The properties of these structures (scale size, trapped population, etc.) are able to explain the observed properties of magnetic holes in the terrestrial plasma sheet. EVMHs may also contribute to turbulence properties, such as intermittency, at short scale lengths in other astrophysical plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗