Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fractional diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Hypereutectic Al-Ce-X (X=Mn, Cr, V, Mo, W) alloys fabricated by laser powder-bed fusion

Here, we characterize the microstructures and high-temperature mechanical properties of Al-2Ce and ternary Al-2Ce-1X (at.%) alloys fabricated by laser powder-bed fusion (LPBF), where X = Mn, Cr, V, Mo, and W are slow-diffusing transition metals. All ternary alloys show a hypereutectic microstructure in the as-LPBF state, containing an interconnected network of eutectic Al 11 Ce 3 phases (~10 vol.%) and an additional population of submicron, equiaxed Al 20 CeX 2 primary precipitates (~10 vol.%) which are isomorphous among these five alloys. Similar microstructures are present in arc-melted rods and atomized powders but are coarser due to the slower cooling rates in these processes. The hardness of the as-LPBF ternary Al-Ce-X alloys (1300–1400 MPa) is higher than that of the binary Al-Ce alloy (~1100 MPa) due to the higher volume fraction of strengthening phases. Furthermore, during exposure at 400 °C for up to three months, greater hardness retention is achieved in the ternary Al-Ce-X alloys (65–75%) than in the binary Al-Ce alloy (~55%), which is attributed to the extreme coarsening resistance of the Al 20 CeX 2 precipitates imparted by the very slow-diffusing ternary solute. These coarsening-resistant Al 20 CeX 2 precipitates also substantially improve alloy creep resistance, increasing the threshold stress for dislocation creep at 300°C from ~32 MPa for the binary Al-Ce alloy to ~77–100 MPa for the ternary Al-Ce-X alloys, and at 400°C from <10 MPa for the binary Al-Ce alloy to >40 MPa for the ternary Al-Ce-V alloy.

36 MATERIALS SCIENCE↗

Creation and Distribution of CAIs in the Protoplanetary Nebula

CaAl rich refractory mineral inclusions (CAIs) found at 1 - 10% mass fraction in primitive chondrites appear to be several million years older than the dominant (chondrule) components in the same parent bodies. A prevalent concern is that it is difficult to retain CAIs for this long against gas-drag-induced radial drift into the sun. We assess a hot inner (turbulent) nebula context for CAI formation, using analytical models of nebula evolution and particle diffusion. We show that outward radial diffusion in a weakly turbulent nebula can prevent significant numbers of CAI-size particles from being lost into the sun for times of 1 - 3 x 10(exp 6) years. To match the CAI abundances quantitatively, we advocate an enhancement of the inner hot nebula in silicate-forming material, due to rapid inward migration of very primitive, silicate and carbon rich, meter-sized objects. 'Combustion' of the carbon into CO would make the CAI formation environment more reduced than solar, as certain observations imply. Abundant CO might also play a role in mass-independent chemical fractionation of oxygen isotopes as seen in CAIs and associated primitive, high-temperature condensates.

Cuzzi, J. N.↗

A computational investigation of high-flux, plate-and-frame membrane modules for industrial carbon capture

In this work, we study the application of membrane-based separation systems for carbon capture, considering plate-and-frame membrane modules. The successful deployment of membrane CO 2 capture system relies on high-performing membranes as well as effective membrane modules that can fully exploit the developed membranes. A plate-and-frame membrane module is especially attractive for CO 2 capture from industrial flue gas due to its lower pressure drop compared to its counterparts such as spiral wound modules and hollow fiber modules. To design better plate-and-frame modules, we investigate their basic unit - a single membrane stack through a combination of computational modeling and experimental investigations. The modeling approach is based on Computational Fluid Dynamics (CFD) to represent a multiphysics problem, including the fluid flow and diffusion processes within a membrane module. We use experimental data collected under different operating conditions to validate the CFD model. Numerical results suggest a good agreement between experiments and model outputs for the CO 2 recovery, CO 2 mole fraction in the retentate and permeate, and stage-cut. The CFD model is able to predict accurately the flow behavior, providing valuable insights on the effects of fluid dynamics on mass transfer of CO 2 . We also carry out a sensitivity analysis to identify the effect of key parameters on the CO 2 recovery and the CO 2 purity of the outlet streams.

CFD simulation↗

Phase composition and magnetic properties of niobium-iron codoped TiO{sub 2} nanoparticles synthesized in Ar/O{sub 2} radio-frequency thermal plasma

Nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} with various Nb{sup 5+} concentrations (Nb/(Ti+Fe+Nb)=0-10.0 at%) and Fe{sup 3+} (Fe/(Ti+Fe+Nb)=0-2.0 at%) were synthesized using Ar/O{sub 2} thermal plasma. Dopant content, chemical valence, phase identification, morphology and magnetic properties were determined using several characterization techniques, including inductively coupled plasma-optical emission spectrometer, X-ray photoelectron spectroscopy, X-ray diffraction, UV-vis diffuse reflectance spectrometer, field-emission scanning electron microscopy, transmission electron microscopy and SQUID commercial instrument. The XRD revealed that all the plasma-synthesized powders were exclusively composed of anatase as major phase and rutile. The rutile weight fraction was increased by the substitution of Fe{sup 3+} for Ti{sup 4+} whereas it was reduced by the Nb{sup 5+} doping. The plasma-synthesized Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} powders had intrinsic magnetic properties of strongly paramagnetic and feebly ferromagnetic at room temperature. The ferromagnetic properties gradually deteriorated as the Fe{sup 3+} concentration was decreased, suggesting that the ferromagnetism was predominated by the phase composition as a carrier-mediated exchange. - Graphical Abstract: Spherical nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} were synthesized using Ar/O{sub 2} thermal plasma. The plasma-synthesized powders were composed of anatase as major phase and rutile. Rutile weight fraction was increased by Fe{sup 3+} addition but was reduced by Nb{sup 5+} doping. Strongly paramagnetic and feebly ferromagnetic properties are of intrinsic nature. Ferromagnetic properties gradually deteriorated as Fe{sup 3+} concentration was increased. Highlights: > Nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} were synthesized using Ar/O{sub 2} thermal plasma. > The plasma-synthesized powders were composed of anatase as major phase and rutile. > Rutile weight fraction was increased by Fe{sup 3+} addition but was reduced by Nb{sup 5+} doping. > Strongly paramagnetic and feebly ferromagnetic properties are of intrinsic nature. > Ferromagnetic properties gradually deteriorated as Fe{sup 3+} concentration was increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ClC-2 is required for rapid restoration of epithelial tight junctions in ischemic-injured murine jejunum

Background and aims: Involvement of the epithelial chloride channel ClC-2 has been implicated in barrier recovery following ischemic injury, possibly via a mechanism involving ClC-2 localization to the tight junction. The present study investigated mechanisms of intestinal barrier repair following ischemic injury in ClC-2{sup -/-} mice. Methods: Wild type, ClC-2 heterozygous and ClC-2{sup -/-} murine jejunal mucosa was subjected to complete ischemia, after which recovery of barrier function was monitored by measuring in vivo blood-to-lumen clearance of {sup 3}H-mannitol. Tissues were examined by light and electron microscopy. The role of ClC-2 in re-assembly of the tight junction during barrier recovery was studied by immunoblotting, immunolocalization and immunoprecipitation. Results: Following ischemic injury, ClC-2{sup -/-} mice had impaired barrier recovery compared to wild type mice, defined by increases in epithelial paracellular permeability independent of epithelial restitution. The recovering ClC-2{sup -/-} mucosa also had evidence of ultrastructural paracellular defects. The tight junction proteins occludin and claudin-1 shifted significantly to the detergent soluble membrane fraction during post-ischemic recovery in ClC-2{sup -/-} mice whereas wild type mice had a greater proportion of junctional proteins in the detergent insoluble fraction. Occludin was co-immunoprecipitated with ClC-2 in uninjured wild type mucosa, and the association between occludin and ClC-2 was re-established during ischemic recovery. Based on immunofluorescence studies, re-localization of occludin from diffuse sub-apical areas to apical tight junctions was impaired in ClC-2{sup -/-} mice. Conclusions: These data demonstrate a pivotal role of ClC-2 in recovery of the intestinal epithelium barrier by anchoring assembly of tight junctions following ischemic injury.

60 APPLIED LIFE SCIENCES↗

Crystal structure prediction with host-guided inpainting generation and foundation potentials

Unconditional crystal structure generation with diffusion models faces challenges in identifying symmetric crystals as the unit cell size increases. Here, we present the crystal host-guided generation (CHGGen) framework to address this challenge through conditional generation using an inpainting method, which optimizes a fraction of atomic positions within a predefined and symmetrized host structure to improve the success rate for symmetric structure generation. By integrating inpainting structure generation with a foundation potential for structure optimization, we demonstrate the method on the ZnS–P 2 S 5 and Li–Si chemical systems, where the inpainting method generates a higher fraction of symmetric structures than unconditional generation. The practical significance of CHGGen extends to enabling the structural modification of crystal structures, particularly for systems with partial occupancy or intercalation chemistry. The inpainting method also allows for seamless integration with other generative models, providing a versatile framework for accelerating materials discovery.

Zhong, Peichen [University of California, Berkeley↗

INITIATION OF CORONAL MASS EJECTIONS IN A GLOBAL EVOLUTION MODEL

Loss of equilibrium of magnetic flux ropes is a leading candidate for the origin of solar coronal mass ejections (CMEs). The aim of this paper is to explore to what extent this mechanism can account for the initiation of CMEs in the global context. A simplified MHD model for the global coronal magnetic field evolution in response to flux emergence and shearing by large-scale surface motions is described and motivated. Using automated algorithms for detecting flux ropes and ejections in the global magnetic model, the effects of key simulation parameters on the formation of flux ropes and the number of ejections are considered, over a 177 day period in 1999. These key parameters include the magnitude and sign of magnetic helicity emerging in active regions, and coronal diffusion. The number of flux ropes found in the simulation at any one time fluctuates between about 28 and 48, sustained by the emergence of new bipolar regions, but with no systematic dependence on the helicity of these regions. However, the emerging helicity does affect the rate of flux rope ejections, which doubles from 0.67 per day if the bipoles emerge untwisted to 1.28 per day in the run with greatest emerging twist. The number of ejections in the simulation is also increased by 20%-30% by choosing the majority sign of emerging bipole helicity in each hemisphere, or by halving the turbulent diffusivity in the corona. For reasonable parameter choices, the model produces approximately 50% of the observed CME rate. This indicates that the formation and loss of equilibrium of flux ropes may be a key element in explaining a significant fraction of observed CMEs.

79 ASTRONOMY AND ASTROPHYSICS↗

Decaying dark matter in light of the PAMELA and Fermi LAT data

A series of experiments measuring high-energy cosmic rays have recently reported strong indications for the existence of an excess of high-energy electrons and positrons. If interpreted in terms of the decay of dark matter particles, the PAMELA measurements of the positron fraction and the Fermi LAT measurements of the total electron-plus-positron flux restrict the possible decaying dark matter scenarios to a few cases. Analyzing different decay channels in a model-independent manner, and adopting a conventional diffusive reacceleration model for the background fluxes of electrons and positrons, we identify some promising scenarios of dark matter decay and calculate the predictions for the diffuse extragalactic gamma-ray flux, including the contributions from inverse Compton scattering with the interstellar radiation field.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmological radio emission induced by WIMP Dark Matter

We present a detailed analysis of the radio synchrotron emission induced by WIMP dark matter annihilations and decays in extragalactic halos. We compute intensity, angular correlation, and source counts and discuss the impact on the expected signals of dark matter clustering, as well as of other astrophysical uncertainties as magnetic fields and spatial diffusion. Bounds on dark matter microscopic properties are then derived, and, depending on the specific set of assumptions, they are competitive with constraints from other indirect dark matter searches. At GHz frequencies, dark matter sources can become a significant fraction of the total number of sources with brightness below the microJansky level. We show that, at this level of fluxes (which are within the reach of the next-generation radio surveys), properties of the faint edge of differential source counts, as well as angular correlation data, can become an important probe for WIMPs.

79 ASTRONOMY AND ASTROPHYSICS↗

Nuclear 'pasta' phase within density dependent hadronic models

In the present paper, we investigate the onset of the 'pasta' phase with different parametrizations of the density dependent hadronic model and compare the results with one of the usual parametrizations of the nonlinear Walecka model. The influence of the scalar-isovector virtual {delta} meson is shown. At zero temperature, two different methods are used, one based on coexistent phases and the other on the Thomas-Fermi approximation. At finite temperature, only the coexistence phases method is used. npe matter with fixed proton fractions and in {beta} equilibrium are studied. We compare our results with restrictions imposed on the values of the density and pressure at the inner edge of the crust, obtained from observations of the Vela pulsar and recent isospin diffusion data from heavy-ion reactions, and with predictions from spinodal calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

WE-G-BRE-03: Dose Painting by Numbers Using Targeted Gold Nanoparticles

Purpose: Homogeneous dose enhancement in tumor cells of lung cancer patients treated with conventional dose of 60–66 Gy in five fractions is limited due to increased risk of toxicity to normal structures. Dose painting by numbers (DPBN) is the prescription of a non-uniform radiation dose distribution in the tumor for each voxel based on the intensity level of that voxel obtained from the tumor image. The purpose of this study is to show that DPBN using targeted gold nanoparticles (GNPs) could enhance conventional doses in the more resistant tumor areas. Methods: Cone beam computed tomography (CBCT) images of GNPs after intratumoral injection into human tumor were taken at 0, 48, 144 and 160 hours. The dose enhancement in the tumor voxels by secondary electrons from the GNPs was calculated based on analytical microdosimetry methods. The dose enhancement factor (DEF) is the ratio of the doses to the tumor with and without the presence of GNPs. The DEF was calculated for each voxel of the images based on the GNP concentration in the tumor sub-volumes using 6-MV photon spectra obtained using Monte Carlo simulations at 5 cm depth (10×10 cm2 field). Results: The results revealed DEF values of 1.05–2.38 for GNPs concentrations of 1–30 mg/g which corresponds to 12.60 – 28.56 Gy per fraction for delivering 12 Gy per fraction homogenously to lung tumor region. Conclusion: Our preliminary results verify that DPBN could be achieved using GNPs to enhance conventional doses to high risk tumor sub-volumes. In practice, DPBN using GNPs could be achieved due to diffusion of targeted GNPs sustainably released in-situ from radiotherapy biomaterials (e.g. fiducials) coated with polymer film containing the GNPs.

60 APPLIED LIFE SCIENCES↗

Use of Ichip for high-throughput in situ cultivation of "uncultivable" microbial species.

One of the oldest unresolved microbiological phenomena is why only a small fraction of the diverse microbiological population grows on artificial media. The ''uncultivable'' microbial majority arguably represents our planet's largest unexplored pool of biological and chemical novelty. Previously we showed that species from this pool could be grown inside diffusion chambers incubated in situ, likely because diffusion provides microorganisms with their naturally occurring growth factors. Here we utilize this approach and develop a novel high-throughput platform for parallel cultivation and isolation of previously uncultivated microbial species from a variety of environments. We have designed and tested an isolation chip (ichip) composed of several hundred miniature diffusion chambers, each inoculated with a single environmental cell. We show that microbial recovery in the ichip exceeds manyfold that afforded by standard cultivation, and the grown species are of significant phylogenetic novelty. The new method allows access to a large and diverse array of previously inaccessible microorganisms and is well suited for both fundamental and applied research.

59 BASIC BIOLOGICAL SCIENCES↗

Semi-Analytical Simulation and Optimization of AlGaAs/GaAs p-i-n Quantum Well Solar Cell

This paper deals with a AlGaAs/GaAs p-i-n quantum well solar cell. The doped region are based on AlGaAs semiconductor while the intrinsic region “I” contain multi quantum well (MQW) system AlGaAs/GaAs. A semi-analytical model in the intrinsic region and numerical drift-diffusion model in doped regions are combined to extract the total current density of the cell versus voltage. The current-voltage (J-V) characteristics are generated for the AM1.5 solar spectrum. The effect of the Aluminum molar fraction x (Al{sub x}Ga{sub 1–x}As), the number, the width, the depth of the wells and barriers in the “i” layer and the doping densities on the electrical outputs of the solar cell are also presented. The optimized solar cell reached a conversion efficiency of 28.72% with a short circuit current density of 36.9 mA/cm{sup 2} and an open circuit voltage of 0.97 V.

14 SOLAR ENERGY↗

Limits on diffuse X-ray emission from M101

Observed limits on diffuse X-ray emission from M101 require that the temperature of any coronal or matrix hot gas which is radiating an appreciable part (10 percent) of the average supernova power be less than 10(5.7)K. Furthermore, the fraction of the galactic plane occupied by hot bubbles similar to the one which apparently surrounds the sun is at most 25 percent in the region between 10 kpc and 20 kpc from the galactic center.

Mccammon, D.↗

The Dense, Warm Interstellar Medium (D-WIM): Unravelling a New Phase of the ISM A PRIMA FIR Probe Mission Project

We propose a study of the Dense Warm Interstellar Medium (D-WIM) via the two fine structure lines of ionized nitrogen (\NII). This new phase of the interstellar medium (ISM) has density 10 $\cmv \le n(e) \le$ 100 $\cmv$, and has effectively been identified throughout much of the Milky Way and in nearby galaxies. :The unexpected conditiosn in the D-WIM immediately raise important questions both about this phase of the ISM and its relationship to the ISM as a while. These include: what is the structure of the D-WIM -- e.g. filling factor, distribution, and morphology?; what is the origin of the D-WIM?; what supports its ionization and what is its evolution given huge overpressure relative to the $\ge$ 100 times more diffuse Warm Ionized Medium (WIM)?; what is its possible relationship to stars - is it the the remnants of very old HII regions that were produced by clusters of masive stars? The PRIMA survey requires a coverage of a large fraction of the plane, plus selected regions at high galactic latitudes. A sensitivity of 10$^{-9}$ $Wm^{-2}sr^{-1}$ would be highly desirable. A spectral resolution $R$ of 10$^4$ will isolate individual spectral features. $R$ = 10$^3$ would be acceptable to measure the total intensity. This PRIMA survey could be part of a broader survey of the ISM, and include a number of other important ISM tracers such as [CII] 158 \um, [OI] 63 \um\ and [OI] 146 \um, depending on wavelength coverage of the instrument. The sensitivity requirement for study of the D-WIM is likely more stringent than for the other lines, and may require special consideration for successful implementation as well as for determining the area that can be observed.

Lis, Dariusz↗

NUCLEAR CONSTRAINTS ON PROPERTIES OF NEUTRON STAR CRUSTS

The transition density {rho} {sub t} and pressure P{sub t} at the inner edge separating the liquid core from the solid crust of neutron stars are systematically studied using a modified Gogny (MDI) and 51 popular Skyrme interactions within well established dynamical and thermodynamical methods. First of all, it is shown that the widely used parabolic approximation to the full equation of state (EOS) of isospin asymmetric nuclear matter may lead to huge errors in estimating the transition density and pressure, especially for stiffer symmetry energy functionals E {sub sym}({rho}), compared to calculations using the full EOS within both the dynamical and thermodynamical methods mainly because of the energy curvatures involved. Thus, fine details of the EOS of asymmetric nuclear matter are important for locating accurately the inner edge of the neutron star crust. Second, the transition density and pressure decrease roughly linearly with increasing slope parameter L of E {sub sym}({rho}) at normal nuclear matter density using the full EOS within both the dynamical and thermodynamical methods. It is also shown that the thickness, fractional mass, and moment of inertia of the neutron star crust are all very sensitive to the parameter L through the transition density {rho} {sub t} whether one uses the full EOS or its parabolic approximation. Moreover, it is shown that E {sub sym}({rho}) constrained in the same subsaturation density range as the neutron star crust by the isospin diffusion data in heavy-ion collisions at intermediate energies limits the transition density and pressure to 0.040 fm{sup -3} {<=}{rho} {sub t} {<=} 0.065 fm{sup -3} and 0.01 MeV fm{sup -3} {<=}P{sub t} {<=} 0.26 MeV fm{sup -3}, respectively. These constrained values for the transition density and pressure are significantly lower than their fiducial values currently used in the literature. Furthermore, the mass-radius relation and several other properties closely related to the neutron star crust are studied by using the MDI interaction. It is found that the newly constrained {rho} {sub t} and P{sub t} together with the earlier estimate of {delta}I/I>0.014 for the crustal fraction of the moment of inertia of the Vela pulsar impose a more stringent constraint of R {>=} 4.7 + 4.0M/M {sub sun} km for the radius R and mass M of neutron stars compared to previous studies in the literature.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hydrogen-dominated plasma, due to silane depletion, for microcrystalline silicon deposition

Plasma conditions for microcrystalline silicon deposition generally require a high flux of atomic hydrogen, relative to SiH{sub {alpha}=0{yields}3} radicals, on the growing film. The necessary dominant partial pressure of hydrogen in the plasma is conventionally obtained by hydrogen dilution of silane in the inlet flow. However, a hydrogen-dominated plasma environment can also be obtained due to plasma depletion of the silane in the gas mixture, even up to the limit of pure silane inlet flow, provided that the silane depletion is strong enough. At first sight, it may seem surprising that the composition of a strongly depleted pure silane plasma consists principally of molecular hydrogen, without significant contribution from the partial pressure of silane radicals. The aim here is to bring some physical insight by means of a zero-dimensional, analytical plasma chemistry model. The model is appropriate for uniform large-area showerhead reactors, as shown by comparison with a three-dimensional numerical simulations. The SiH{sub {alpha}} densities remain very low because of their rapid diffusion and surface reactivity, contributing to film growth which is the desired scenario for efficient silane utilization. Significant SiH{sub {alpha}} densities due to poor design of reactor and gas flow, on the other hand, would result in powder formation wasting silane. Conversely, hydrogen atoms are not deposited, but recombine on the film surface and reappear as molecular hydrogen in the plasma. Therefore, in the limit of extremely high silane depletion fraction (>99.9%), the silane density falls below the low SiH{sub {alpha}} densities, but only the H radical can eventually reach significant concentrations in the hydrogen-dominated plasma.

36 MATERIALS SCIENCE↗