Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Selection of wires and circuit protective devices for STS Orbiter vehicle payload electrical circuits

Electrical designers of Orbiter payloads face the challenge of determining proper circuit protection/wire size parameters to satisfy Orbiter engineering and safety requirements. This document is the result of a program undertaken to review test data from all available aerospace sources and perform additional testing to eliminate extrapolation errors. The resulting compilation of data was used to develop guidelines for the selection of wire sizes and circuit protection ratings. The purpose is to provide guidance to the engineering to ensure a design which meets Orbiter standards and which should be applicable to any aerospace design.

Gaston, Darilyn M.↗

Navier-Stokes simulation of the supersonic combustion flowfield in a ram accelerator

A computational study of the ram accelerator, a ramjet-in-tube device for accelerating projectiles to ultrahigh velocities, is presented. The analysis is performed using a fully implicit TVD scheme that efficiently solves the Reynolds-averaged Navier-Stokes equations and the species continuity equations associated with a finite rate combustion model. Previous analyses of this concept were based on inviscid assumptions. The present results indicate that viscous effects are of primary importance; in all the cases studied, shock-induced combustion always started in the boundary layer. The effects of Mach number, mixture composition, pressure, and turbulence are investigated for various configurations. Two types of combustion processes, one stable and the other unstable, were observed depending on the inflow conditions. In the unstable case, a detonation wave is formed, which propagates upstream and unstarts the ram accelerator. In the stable case, a solution that converges to steady-state is obtained, in which the combustion wave remains stationary with respect to the ram accelerator projectile. The possibility of stabilizing the detonation wave by means of a backward facing step is also investigated. In addition to these studies, two numerical techniques were tested. These two techniques are vector extrapolation to accelerate convergence, and a diagonal formulation that eliminates the expense of inverting large block matrices that arise in chemically reacting flows.

Yungster, Shaye↗

The P/Halley: Spatial distribution and scale lengths for C2, CN, NH2, and H2O

From P/Halley long slit spectroscopic exposures on 12 dates, extending from Oct. 1985 to May 1986, spatial profiles were obtained for emissions by C2, CN, NH2, and OI(1D). Haser model scale lengths were fitted to these data. The extended time coverage allowed the checking for consistency between the various dates. The time varying production rate of P/Halley severely affected the profiles after perihelion, which is shown in two profile sequences on adjacent dates. Because of the time varying production rate, it was not possible to obtain reliable Haser model scale lengths after perihelion. The pre-perihelion analysis yielded Haser model scale lengths of sufficient consistency that they can be used for production rate determinations, whenever it is necessary to extrapolate from observed column densities within finite observing apertures. Results of scale lengths reduced to 1 AU are given and discussed.

Fink, Uwe↗

Oxygen extraction from lunar soil by fluorination

Mining and processing of lunar material could possibly lead to more cost-efficient scenarios for permanent presence of man in space and on the Moon. Production of oxygen for use as propellant seems especially important. Different candidate processes for oxygen-extraction from lunar soil were proposed, of which the reduction of ilmenite by hydrogen was studied most. This process, however, needs the concentration of ilmenite from lunar regolith to a large extent and releases oxygen only with low efficiency. Another possibility - the fluorination method - which works with lunar bulk material as feedstock is discussed. Liberation of oxygen from silicate or oxide materials by fluorination methods has been applied in geoscience since the early sixties. The fact that even at moderate temperatures 98 to 100 percent yields can be attained, suggests that fluorination of lunar regolith could be an effective way of propellant production. Lunar soil contains about 50 percent oxygen by weight which is gained nearly completely through this process as O2 gas. The second-most element Si is liberated as gaseous SiF4. It could be used for production of Si-metal and fluorine-recycling. All other main elements of lunar soil will be converted into solid fluorides which also can be used for metal-production and fluorine-recycling. Preliminary results of small scale experiments with different materials are discussed, giving information on specific oxygen-yields and amounts of by-products as functions of temperature. These experiments were performed with an already existing fluorine extraction and collection device at the University of Bonn, normally used for determination of oxygen-isotopic abundances. Optimum conditions, especially concerning energy consumption, are investigated. Extrapolation of the experimental results to large industrial-type plants on the Moon is tried and seems to be promising at first sight. The recycling of the fluorine is, however, crucial for the process. It might be achieved by means of electrolysis. This needs further investigation. The technical problem of transport and handling of the toxic and corrosive fluorine seems to be solvable and could be done by inert storage vessels.

Seboldt, W.↗

Follow-on cable coupling lightning test. Volume 3: Appendixes E and F

The following subject areas are covered: (1) Follow-on cable coupling lightning test swept continuous wave data plots, and (2) USBI cable coupling responses, EMA final test report (Lightning test results for the modified systems tunnel bonding on the Space Shuttle Solid Rocket Booster: tabulation of cable responses to threat level lightning testing; demonstration of linear extrapolation of swept continuous wave testing to NASA lightning specification).

Source record↗

Heat transfer and pressure drop in a compact pin-fin heat exchanger with pin orientation at 18 deg to the flow direction

The heat transfer and pressure drop characteristics of a novel, compact heat exchanger in helium gas were measured at 3.5 MPa and Reynolds numbers of 450 to 12,000. The pin-fin specimen consisted of pins, 0.51 mm high and spaced 2.03 mm on centers, spanning a channel through which the helium flows; the angle of the row of pins to the flow direction was 18 deg. The specimen was radiatively heated on the top side at heat fluxes up to 74 W/sq cm and insulated on the back side. Correlations were developed for the friction factor and Nusselt number. The Nusselt number compares favorably to those of past studies of staggered pin-fins, when the measured temperatures are extrapolated to the temperature of the wall-fluid interface.

Olson, D. A.↗

Orr-Sherby-Dorn creep strengths of the refractory-metal alloys C-103, ASTAR-811C, W-5Re, and W-25Re

Available creep data for the refractory-metal alloys C-103 (Nb/10 percent Hf/1 percent Ti/0.7 percent Zr), ASTAR-811C (Ta/8 percent W/1 percent Re/0.7 percent Hf/0.025 percent C), W-5Re (W/5 percent Re), and W-25Re (W/25 percent Re) were correlated by the Orr-Sherby-Dorn method and extrapolated to 1 percent creep over 10 years. Useful life was specified to be 2 standard estimates of error below the mean surface through the data. Over the temperature range of 1200 to 1800 K, ASTAR-811C was found to be the strongest of these alloys. In particular, ASTAR-811C was found to have at 1800 K the same creep strength as W-25Re at 1420 K. The difference between these results and those of Horak and Booker likely devolves from the comparative lack of long-time data on tungsten alloys.

English, Robert E.↗

Ionization of NO at high temperature

Space vehicles flying through the atmosphere at high speed are known to excite a complex set of chemical reactions in the atmospheric gases, ranging from simple vibrational excitation to dissociation, atom exchange, electronic excitation, ionization, and charge exchange. Simple arguments are developed for the temperature dependence of the reactions leading to ionization of NO, including the effect of vibrational electronic thermal nonequilibrium. NO ionization is the most important source of electrons at intermediate temperatures and at higher temperatures provides the trigger electrons that ionize atoms. Based on these arguments, recommendations are made for formulae which fit observed experimental results, and which include a dependence on both a heavy particle temperature and different vibration electron temperatures. In addition, these expressions will presumably provide the most reliable extrapolation of experimental results to much higher temperatures.

Hansen, C. Frederick↗

Calculation of unsteady linearized Euler flows in cascades using harmonically deforming grids

A method for calculating unsteady, inviscid, compressible flows in cascades is presented. Using the linearized Euler technique, the flow is decomposed into a steady or mean flow plus a harmonically varying small disturbance flow. The equations that describe the small disturbance flow are linear variable coefficient equations, and are solved using a pseudo-time time marching Lax-Wendroff technique. Unlike previous linearized methods, however, the solution is computed on a harmonically deforming computational grid that conforms to the motion of the vibrating airfoils. The mean flow and perturbation flow solutions are defined in the deforming coordinate system rather than in a coordinate system fixed in space. Hence, no extrapolation terms are required to implement the upwash boundary conditions at the airfoil surfaces, significantly improving the accuracy of the method. For transonic flow calculations, unsteady shock motions are modelled using shock capturing. The unsteady loads due to the shock motion are then seen as pressure impulses. Representative computational results are presented for transonic channel flows and subsonic and transonic cascade flows.

Hall, Kenneth C.↗

Lightning induced currents in aircraft wiring using low level injection techniques

Various techniques were studied to predict the transient current induced into aircraft wiring bundles as a result of an aircraft lightning strike. A series of aircraft measurements were carried out together with a theoretical analysis using computer modeling. These tests were applied to various aircraft and also to specially constructed cylinders installed within coaxial return conductor systems. Low level swept frequency CW (carrier waves), low level transient and high level transient injection tests were applied to the aircraft and cylinders. Measurements were made to determine the transfer function between the aircraft drive current and the resulting skin currents and currents induced on the internal wiring. The full threat lightning induced transient currents were extrapolated from the low level data using Fourier transform techniques. The aircraft and cylinders used were constructed from both metallic and CFC (carbon fiber composite) materials. The results show the pulse stretching phenomenon which occurs for CFC materials due to the diffusion of the lightning current through carbon fiber materials. Transmission Line Matrix modeling techniques were used to compare theoretical and measured currents.

Stevens, E. G.↗

Space Station transition through Spacelab

It is appropriate that NASA's Office of Space Science and Application's science management structures and processes that have proven successful on Spacelab be applied and extrapolated to Space Station utilization, wherever practical. Spacelab has many similarities and complementary aspects to Space Station Freedom. An understanding of the similarities and differences between Spacelab and Space Station is necessary in order to understand how to transition from Spacelab to Space Station. These relationships are discussed herein as well as issues which must be dealt with and approaches for transition and evolution from Spacelab to Space Station.

Craft, Harry G., Jr.↗

Measurement of the 0.3-8.5 MeV Galactic gamma-ray spectrum from the Galactic center direction

The low-energy gamma-ray spectrum from the direction of the Galactic center is determined using data obtained with the SMM Gamma-Ray Spectrometer. It is found that the diffuse gamma-ray spectrum from the Galactic center region can be interpreted in a straightforward way as the sum of five components of a presented equation. The components include a hard power law dominating the continuum at high energies caused principally by cosmic ray electron bremsstrahlung radiation, two narrow lines due to Al-26 decay and positron annihilation, an excess continuum component below 0.511 MeV consistent with the annihilation of positrons by formation of Ps, and a soft power law at low energies which is consistent with an extrapolation upward in energy of known hard X-ray sources in the Galactic center region.

Harris, M. J.↗

Enhanced frequency spectra of winds at the mesoscale based on radar profiler observations

Frequency spectra of horizontal winds in the troposphere and stratosphere, over a range of periods and frequencies, have been studied by means of two radar profilers, located at Plattenville, Colorado, and Poker Flat, Alaska, to determine if the spectra deviations from a consistent power law behavior can be verified in a statistical sense. At Plattenville, the spectrum of both zonal and meridional winds in the troposphere is found to obey a low-frequency regime at periods longer than a few hours and a high-frequency regime at periods less than 1/2 hour. The energy levels in the high-frequency regime are enhanced over those obtained by extrapolation of the low-frequency regime by a factor of 4. At Poker Flat, a similar pattern is found in the stratosphere, and the magnitude of the enhancement factor is 1.7. It is suggested that the enhanced amplitudes reflect the effects of upward-propagating gravity waves launched by the flow over a rough terrain, and that they influence the dynamics of the large-scale circulation to a great extent.

Nastrom, G. D.↗

On the numerical computation of nonlinear force-free magnetic fields

An algorithm has been developed to extrapolate nonlinear force-free magnetic fields from the photosphere, given the proper boundary conditions. This paper presents the results of this work, describing the mathematical formalism that was developed, the numerical techniques employed, and comments on the stability criteria and accuracy developed for these numerical schemes. An analytical solution is used for a benchmark test; the results show that the computational accuracy for the case of a nonlinear force-free magnetic field was on the order of a few percent (less than 5 percent). This newly developed scheme was applied to analyze a solar vector magnetogram, and the results were compared with the results deduced from the classical potential field method. The comparison shows that additional physical features of the vector magnetogram were revealed in the nonlinear force-free case.

Wu, S. T.↗

Evolution of the atmospheres of the terrestrial planets

It is pointed out that, even though the atmospheres of the earth, Venus, and Mars have distinctly different climates, it appears likely that all three planets were created under similar conditions; the planets are different only in terms of mass and incident solar radiation. This paper considers some of the difficulties in assessing the nature of the primordial climates and in extrapolating these climates to the present day. In particular, questions concerning clouds, water, and CO2 on the earth and on Mars are addressed.

Chamberlain, Joseph W.↗

Single- and double-photoionization cross sections of atomic nitrogen from threshold to 31 A

The relative photoionization cross section of atomic nitrogen for the production of singly and doubly charged ions has been measured from 44.3 to 275 A and from 520 to 852 A. The results have been made absolute by normalization to one-half of the molecular nitrogen cross section at short wavelengths. The smoothed atomic nitrogen cross sections sigma can be accurately represented, at short wavelengths, by the equation sigma(Mb) = 36,700 x (E exp-2.3) as a function of the photon energy E (eV), thereby allowing the cross sections to be extrapolated to the nitrogen K edge at 31 A.

Samson, James A. R.↗

Controlled Ecological Life Support System

The NASA CELLS program is based upon the integration of biological and physiochemical processes in order to produce a system that will produce food, a breathable atmosphere, and potable water from metabolic and other wastes. The CELSS concept is described and a schematic system diagram is provided. Central to the CELSS concept is the Plant Growth Chamber, where green plant photosynthesis produces food, and aids in the production of oxygen and water. Progress to date at the Breadboard Facility at the Kennedy Space Center is summarized. The Breadboard Facility will implement the basic techniques and processes required for a CELSS based on photosynthetic plant growth in a ground-based system of practical size and results will be extrapolated to predict the performance of a full-sized system. Current available technology and near-future forecasts for plant growth techniques (focusing on maximum productivity), food sources (to select optimal CELSS plants), and waste management and contaminant control are discussed.

Averner, Maurice M.↗

The heliospheric current sheet and modulation of Galactic cosmic rays

The posssible effect of the heliospheric current sheet on the modulation of cosmic rays is examined by examining the number and the nature of coronal mass ejections on the basis of data collected on an abrupt onset of cosmic ray modulation observed in May 1987 on earth and in September 1987 by Pioneer 10 and 11 and in a previous study of modulation for the years 1976-1986. The measure used to examine the gradient-drift theory (according to which modulation is associated with solar cycle changes in the current sheet) is the value of the difference in the maximum latitudinal extents for the current sheet in the northern and the southern solar hemispheres. These were obtained from contours of the current sheet produced by extrapolating photospheric magnetic field measurements to a solar wind source surface. The observations are found to be consistent with the predictions of the gradient drift model.

Smith, Edward J.↗