Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “excel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Interplay between hydrogen, temperature, and character angle on dissociated dislocation energies in Fe–Ni–Cr austenitic stainless steels

Dislocation energy has an important role in the mechanical performance of structural metals. While dislocation energies cannot be fully obtained from continuum theories due to the contribution of the dislocation core, they have been calculated via atomistic simulations in elemental metals. However, constraints on the local atomic environments have prevented the use of such approaches in systems that incorporate alloying or interstitial solutes. In this work, we develop robust molecular dynamics methods to resolve these issues through a geometric construction of dislocation dipoles and the calculation of time-averaged energies. Furthermore, we apply these methods to calculate dislocation energies (including core energies) in an Fe 70 Ni 11 Cr 19 austenitic steel at a variety of character angles, hydrogen concentrations, temperatures, and dipole spacings. The resulting highly converged energies show an excellent agreement with continuum expressions. Overall, hydrogen concentrations up to 1.0 % do not have a significant effect on the elastic parameters and dislocation energy. The methods and insights derived in this work have the potential to facilitate the calculation of dislocation energies in a wide range of systems, and to guide our understanding of hydrogen embrittlement.

Alloyed systems↗
DOE OSTI2024

Solid face sheets enable lattice metamaterials to withstand high-amplitude impulsive loading without yielding

Owing to their ability to provide tunable mechanical responses, lattice materials are frequently studied to elucidate their response to static and dynamic loads. However, these roles are typically in opposition: static loads must be supported sufficiently far away from the onset of buckling or yielding, whereas dynamic loads are typically ameliorated by crushing of the lattice, which provides excellent energy-absorption due to the large plastic deformation accompanying densification. In contrast, this work considers the octet truss as an exemplar topology, in a structural role where it must simultaneously support static loads while enduring high-amplitude impulsive loads. This study focuses on the ability to withstand impulsive loads without yielding, an essential prerequisite to enduring dual loading. Computational studies using the ALE3D hydrocode were performed to examine the response of the octet truss under a short temporal width impulse shape associated with laser-driven shocks. A key finding was that covering the lattice with a solid face sheet and treating this face sheet thickness as a design variable allows the Taylor-like pulse to be attenuated prior to entering the weaker lattice, at the cost of added mass up front. Experimental validation was accomplished by laser-driven shock testing, using octet trusses printed out of Ti-5Al-5V-5Mo-3Cr. The results show that for a given quantity of mass, the attenuation is maximized when as much mass as possible is moved into the face sheet, leaving a more slender lattice structure. The effect of placing mass in the face sheet rather than lattice beams dominates the effect of relative density, to the point where a low-mass structure with most of the mass concentrated in the face sheet can outperform a high-mass structure with most of the mass in the lattice. Finally, by further understanding the propagation of short pulse width waves within under-dense structures, this study expand the domain of applicability of such structures, including lattice materials, to challenging dual-loading regimes spanning decades of strain rates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Parametric optimization of the liquid sampling-atmospheric pressure glow discharge ionization source coupled to an Orbitrap mass spectrometer for neodymium isotope ratio determinations

Isotope ratio determinations are a valuable tool in several application areas. In nuclear forensics, the isotope ratios of uranium and plutonium are commonly used as a signature for the nuclear material's provenance and processing history. However, signatures from other coexisting elements, such as neodymium and samarium, can offer additional insights. Here, the liquid sampling-atmospheric pressure glow discharge (LS-APGD) ionization source coupled to an Orbitrap mass spectrometer (MS) has demonstrated its utility for actinide measurements. This instrumental platform can leverage the high resolution offered by the Orbitrap MS to overcome potential isobaric interferences, such as 144 Nd- 144 Sm, 148 Nd- 148 Sm, and 150 Nd- 150 Sm pairs. The work presented herein demonstrates the rapid, accurate, and precise determination of the isotope ratios for neodymium using the LS-APGD/Orbitrap MS. Both the LS-APGD and Orbitrap MS parameters were optimized systematically, with NdO + found to be the most abundant, most reduced species after applying the optimal collision-induced dissociation modalities. A limit of detection of 3 pg of 142 Nd was achieved when data was acquired and processed using the FTMS Booster, an external data acquisition and processing system offered by Spectroswiss. Excellent accuracy of better than 99 % and precision of <1 % RSD were achieved when a solution of the well-characterized neodymium standard (JNdi-1 standard) was analyzed under the optimized condition, indicating the LS-APGD/Orbitrap's great potential for isotope ratio analysis of Nd and other REEs for diverse applications.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

A mesoscale crystal plasticity model to predict room-temperature deformation and martensitic transformation of high-strength Quenching and Partitioning (Q&P) Steels and validation with synchrotron X-ray diffraction

Renowned for the superior mechanical properties and adeptness at cold-forming, Quenching and Partitioning (QP) steels have gained prominence as a promising candidate material in fabricating safety-critical components in various industries. The pertinent research on QP steels focus on the martensitic transformation of the Retained Austenite (RA) phase during cold-forming, a crucial mechanism that substantially influences the overall strength and ductility of QP steels. The austenite stability and transformation rate heavily rely on the local strain path and the initial microstructure, which is challenging for analytical prediction. In this paper, a mesoscale model is developed to capture the deformation and transformation kinetics of QP steels inside the microstructure. The model integrates the detailed explicit microstructure, acquired from characterization experiments, into a high-resolution finite element (FE) mesh. It distinctly model the deformation and interaction between the various phases and the effect on the transformation of RA. The model is validated with high energy X-ray diffraction (HEXRD) data, and shows excellent capability in predicting the asymmetric stress-strain behavior under uniaxial tension and compression, as well as the martensitic transformation rate. The model is used to investigate the strain and load partitioning effect of surrounding matrix to the transformation of RA, offering insights into the complex behavior of QP980 and facilitates further material development.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Microstructure and high temperature properties of tungsten processed via electron beam melting additive manufacturing

There is considerable interest in the adoption of additive manufacturing for processing refractory metals. The layer-wise fabrication approach enables opportunities for producing complex geometries which cannot be otherwise be achieved via powder metallurgy. However, the processing science is still in its nascent stages and structure–property relations are relatively unexplored. Fundamental research is needed to further develop the technology and enable the fabrication of refractory metals for high temperature applications. Here we focus on the processing of pure tungsten using electron beam melting additive manufacturing. Experimentally we develop a suitable processing window for achieving high density crack free material. Microstructural analysis reveals that the microstructure generally consists of a columnar structure with a (111) build direction fiber preference, although, fiber switching was observed. Process induced deformation is believed to drive the formation of subgrains whose boundaries exhibit a high dislocation density. Additionally, high temperature tensile testing reveals that the material exhibits excellent properties closer to that of annealed tungsten. Significant mechanical anisotropy was observed to be present which is likely driven by strong crystallographic texture.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Alloy designs for high temperature Mo-base systems

For high temperature applications Mo base alloy requirements include both superior structural performance and environmental resistance. To address these requirements alloys in the Mo-Si-B system and refractory multi-principal element alloys (RMPEA) are being developed that exhibit a promising potential, but also have some remaining challenges to improve ductility, lower density and enhance environmental resistance. In the Mo-Si-B system microstructures with a Mo solid solution (Moss) Mo 3 Si and Mo 5 SiB 2 (T2) phases have been the focus of attention. However, the Si solubility in the Moss phase diminishes the ductility and toughness. In order to address this issue a new design based upon Moss, Mo 2 B and T 2 phases lowers the Si solubility in the Moss to improve ductility while the T 2 phase maintains the oxidation performance. Selected additions of Al and Ti enable a density reduction to below 8 g/cm 3 . The RMPEA designs for Mo-rich alloys provide for excellent structural performance, but the complex oxidation products provide no protection. However, in this case a new coating design has been introduced that provides the required environmental resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Long-Term Outcomes of Patients With Early Stage Nonbulky Hodgkin Lymphoma Treated With Combined Modality Therapy in the Stanford V Trials (the G4 and G5 Studies)

Combined modality therapy (CMT) is standard therapy for early-stage Hodgkin lymphoma (ESHL). We previously reported excellent outcomes with the abbreviated Stanford V regimen. Herein we report updated results with median follow-up >10 years on survival, therapy-related late effects, and impact of disease risk factors on patient outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

Randomized Trial of Radiation Therapy With Weekly Cisplatin or Cetuximab in Low-Risk HPV-Associated Oropharyngeal Cancer (TROG 12.01) – A Trans-Tasman Radiation Oncology Group Study

The excellent prognosis of patients with low-risk human papillomavirus (HPV)- associated oropharyngeal squamous cell carcinoma has led to concerns about overtreatment and excessive toxicity with radiation therapy and cisplatin, leading to interest in de-intensification trials. We investigated whether cetuximab, an epidermal growth factor receptor targeting antibody, when combined with radiation therapy would result in a decrease in symptom burden and toxicity with similar efficacy compared with weekly cisplatin.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

Green synthesis of cellulose formate and its efficient conversion into 5-hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) production from cellulose is a hot topic, while the rigidity of cellulose limits its efficient conversion into HMF. Cellulose formate has exhibited the great potential for HMF production but it’s synthesis via direct formylation of cellulose in formic acid is difficult. We reported a green synthetic route of cellulose formate and its efficient conversion into HMF. Ball milled cellulose formate (BCF) was synthesized via ball milling followed by formylation in formic acid at 80 °C for 0.5 h. The structure of BCF was thoroughly characterized and BCF was subsequently converted to HMF catalyzed by AlCl3 and HCl in dimethyl sulfoxide (DMSO)-H 2 O media. Results showed that ball milling of cellulose for 1–1.5 h efficiently deconstructed its crystallinity and degree of polymerization, boosting its further formylation and catalytic conversion. An overall 66.9% HMF yield from cellulose was achieved at 150 °C for 20 min using BCF derived from cellulose ball milled for 1.5 h as the substrate. BCF exhibits high reactivity toward HMF due to its excellent solubility and accessibility in DMSO-H 2 O media, and the release of formic acid in reaction further facilitates HMF production. BCF synthesized with different ball milling times shows different degrees of substitution of formyl groups, which could serve as an indicator and regulate the HMF production. The green synthesis of cellulose formate creates an efficient pathway for HMF production.

5-hydroxymethylfurfural↗
DOE OSTI2021

Optimization of the microstructure and mechanical properties of electron beam welded high-strength medium-entropy alloy (NiCoCr) 94 Al 3 Ti 3

For this work, the weldability and effects of subsequent heat treatment on the microstructure and mechanical properties of the medium-entropy alloy (MEA) (NiCoCr) 94 Al 3 Ti 3 have been explored using electron beam welding (EBW). It was found that EBW joints consist of a supersaturated f.c.c. matrix with coarse, asymmetric columnar grains (17.7–24 μm). The fraction of twins and Σ3 n CSL boundaries in weld joints was only 10% of that in the base metal, a value which increased to 30% after aging at 800 °C. The aging also led to improvements in the hardness, tensile strength, and work hardening rate, a result of the precipitation of a high volume fraction (0.29–0.33) of ultrafine (15–17.4 nm dia.) coherent spherical L1 2 -structured particles. The contributions of the L1 2 nanoparticles and Hall-Petch strengthening to the yield strength were estimated to be 537–573 MPa and 105–123 MPa, respectively. The MEA shows excellent weldability and, after aging, good strength (YS~1098 MPa, UTS~1368 MPa) and elongation to failure (~11%) by ductile fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Markovnikov alcohols via epoxide hydroboration by molecular alkali metal catalysts

Synthesis of branched “Markovnikov” alcohols is crucial to various chemical industries. The catalytic reduction of substituted epoxides under mild conditions is a highly attractive method for preparing such alcohols. Classical methods based on heterogeneous or homogeneous transition metal-catalyzed hydrogenation, hydroboration, or hydrosilylation usually suffer from poor selectivity, reverse regioselectivity, limited functional group compatibility, high cost, and/or low availability of the catalysts. Here we report the discovery of highly regioselective hydroboration of nonsymmetrical epoxides catalyzed by ligated archetypal reductants in organic chemistry – alkali metal triethylborohydrides. The chemoselectivity and turnover efficiencies of the present catalytic approach are excellent. Thus, terminal and internal epoxides with ene, yne, aryl, and halo groups were selectively and quantitatively reduced under a substrate-to-catalyst ratio (S/C) of up to 1000. Mechanistic investigations point to a mechanism reminiscent of frustrated Lewis pair action on substrates in which a nucleophile and Lewis acid act cooperatively on the substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Carbon fibers derived from liquefied and fractionated poplar lignins: The effect of molecular weight

Lignin recovered from poplar, a key woody biomass resource proposed for lignocellulosic refineries, was investigated for conversion into carbon fibers. Aqueous solutions of ethanol at selected temperatures and compositions, where the requisite solvent and liquefied-lignin phases form, were used to purify and fractionate hybrid poplar (HP) lignin using the Aqueous Lignin Purification with Hot Agents (ALPHA) process. Sugars (<0.1%) and ash (0.01 ± 0.01%) content of the highest molecular weight fraction (Mw = 52 kDa) approached the limits of detection. This 52 kDa fraction could be dry spun with excellent stability and was subsequently converted into carbon fibers having strength (1.1 ± 0.2 GPa) and modulus (78 ± 8 GPa) essentially double those previously achieved with neat poplar and other hardwood lignins. Of equal importance, stabilization times were decreased by a factor of five. Such stabilization and strength/modulus improvements are essential for reducing the overall manufacturing cost of carbon fibers being proposed for cost-sensitive applications.

09 BIOMASS FUELS↗
DOE OSTI2022

Replicating HCCI-like autoignition behavior: What gasoline surrogate fidelity is needed?

This work seeks to characterize the fidelity needed in a gasoline surrogate with the intent to replicate the complex autoignition behavior exhibited within advanced combustion engines, and specifically Homogeneous Charge Compression Ignition (HCCI). A low-temperature gasoline combustion (LGTC) engine operating in HCCI mode and a rapid compression machine (RCM) are utilized to experimentally quantify fuel reactivity, through autoignition and preliminary heat release characteristics. Fuels considered include a research grade E10 U.S. gasoline (RD5-87), three multi-component surrogates (PACE-1, PACE-8, PACE-20), and a binary surrogate (PRF88.4). Each fuel was studied at lean/HCCI-like conditions covering a wide range of temperatures and pressures that are representative of naturally aspirated to high boost engine operation. Detailed chemical kinetic modeling is also undertaken using a recently updated gasoline surrogate kinetic model to simulate the RCM experiments and to provide chemical insight into surrogate-to-surrogate differences. The LGTC engine experiments demonstrate nearly identical reactivity between PACE-20 and RD5-87 across studied conditions, while faster phasing is seen for both PACE-1 and PACE-8 due to their stronger intermediate- and low-temperature heat release (ITHR/LTHR) at naturally aspirated and boosted conditions, respectively. The RCM experiments reveal typical low-temperature, negative temperature coefficient (NTC) and intermediate-temperature autoignition behaviors at all pressure conditions for RD5-87, which are qualitatively reproduced by all surrogates. Quantitative discrepancies in both autoignition and preliminary heat release are observed for all surrogates, while their ability to replicate RD5-87 autoignition behavior follows the order of PACE-20 > PACE-1 > PACE-8 > PRF88.4. Excellent mapping is obtained between the LGTC engine and the RCM, where the engine pressure-time trajectories can be characterized by the regimes represented by the RCM autoignition isopleths. The kinetic model performs commendably when simulating both autoignition and preliminary heat release of PACE-20, while typically overpredicting ignition delay times for PACE-1, PACE-8 and PRF88.4 at high-pressure and low-temperature/NTC conditions. Sensitivity and rate of production (ROP) analyses highlight surrogate-to-surrogate differences in the governing chemical kinetics where n-pentane initiates rapid OH branching at a faster rate and an earlier timing for PACE-20 than iso-pentane does for PACE-1 and PACE-8, making it computationally more reactive than the other surrogates. The current study highlights the need to include non-standardized properties, such as the lean/HCCI-like autoignition characteristics, in addition to ASTM properties (e.g., RON, MON) as metrics of fuel reactivity and targets to be matched when formulating high-fidelity surrogates that fully capture gasoline advanced combustion behavior such as HCCI-like autoignition.

42 ENGINEERING↗
DOE OSTI2022

Detection of surface water temperature variations of Mongolian lakes benefiting from the spatially and temporally gap-filled MODIS data

Lakes provide critical water resources for human activities and ecosystems, particularly in the Mongolian Plateau (MP), which is characterized by a dry climate and a harsh environment. As a region that is sensitive to anthropogenic warming, tracking lake surface water temperature (LSWT) changes in Mongolian lakes is crucial for understanding the consequences of a warming climate on lake ecosystems. However, the long-term monitoring of LSWT is restricted by the spatiotemporal gaps in the raw imagery of remote sensing-based land surface temperature (LST), e.g., the commonly used Moderate Resolution Imaging Spectroradiometer (MODIS) LST products. This study applied an improved gap-filling method by utilizing the discrete cosine transform-based penalized least squares (DCT-PLS) strategy in the spatial domain combined with the linear interpolation (LI) algorithm in the temporal domain. The method was applied to fill gaps in the LSWT imagery of 12 representative lakes across MP. The randomly sampled high-quality MODIS LSWT values in the spatial and temporal domains were excavated as false data gaps and considered “virtual true” validation datasets. The spatial validation results showed that the estimated LSWT for all the lake cases were comparable with the “virtual true” LSWT values, with the average values of the coefficient of determination, mean absolute error, mean square error, and root mean square error being 0.98, 0.38 °C, 0.45 °C, and 0.59 °C, respectively. Meanwhile, the error of nighttime LSWT results was relatively lower than that of daytime LSWT. For temporal interpolation validation, the LI algorithm exhibited relatively better performance and could more objectively indicate the variation in LSWT. Benefiting from the spatially and temporally well-constrained data, we analyzed the interannual and intra-annual change characteristics of the LSWTs of the 12 lakes. The long-term variations of annual and seasonal mean LSWTs in the 12 selected lakes exhibited no evident trends in 2000–2020, while presented apparent interannual fluctuations. The slight changes in the average LSWTs of the 12 selected lakes were in excellent synchronization with the surrounding LST derived from the reanalysis datasets, confirming the widely reported phenomenon of “global warming hiatus” that occurred in the early 21st century. This study improves the understanding of the LSWT variations in Mongolian lakes in response to global climate change. It has the potential to provide an effective approach for monitoring LSWT changes in other large-scale studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Development of rare-earth-free bulk magnets with energy product up to 12 MGOe in field annealed Mn–Bi–Mg–In–Sb alloys

A treatment consisting of annealing in a moderately strong, ≤30 kOe, magnetic field was applied to arc-melted ingots and compacted melt-spun alloys with composition Mn 50 Bi 50-x-y-z Mg x In y Sb z . The high degree of texture of the magnetic α phase induced with annealing of the ingot samples (except the Mn–Bi–Sb one) allowed for accurate determination of the phase anisotropy field. Alloying was found to increase the anisotropy field from 45 kOe in the Mn 50 Bi 50 alloy to 65 kOe in the Mn 50 Bi 45 Mg 3 In 0.5 Sb 1.5 alloy. In the compacted melt-spun alloys subjected to field annealing, a higher degree of texture could be achieved after compaction which had involved less heating, when a smaller fraction of the metastable β' phase had been converted into the α phase; compaction at room temperature allowed for the highest degree of texture in the Mn 50 Bi 45 Mg 3 In 0.5 Sb 1.5 magnet. The addition of indium was found to decrease the solidus temperatures of the alloys, facilitating the development of the α phase during the field annealing and modifying the properties of the resulting magnets. Introduction of indium resulted in a higher coercivity H c of the Mn–Bi–Mg–In magnets and in a better texture of the Mn–Bi–Mg–Sn–In magnets. The former effect allowed, in particular, for a viable maximum energy product ( BH ) max of 10 MGOe to be developed in the Mn 50 Bi 46.5 Mg 3 In 0.5 magnet through annealing in a relatively low field of 15 kOe, whereas the latter effect allowed for an excellent combination of ( BH ) max = 11.6 MGOe and H c = 8.5 kOe in the Mn 50 Bi 45 Mg 3 In 0.5 Sb 1.5 magnet. The highest ( BH ) max of 12 MGOe was realized in the Mn 50 Bi 46 Mg 3 In 0.5 Sb 0.5 magnet.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Aluminum-doped U 3 Si 2 composite fuels with enhanced oxidation resistance

Al-doped U 3 Si 2 composite fuels with controlled microstructure were fabricated by spark plasma sintering that display greatly-improved oxidation resistance as compared with monolithic and Al-doped silicides prepared by standard powder metallurgy or arc melting. The effects of Al additives on the thermal-mechanical properties and oxidation resisance of the micron- and nano-sized U 3 Si 2 composites were investigated. Additionally, a minimal addition of 1.8 at% Al is effective to increase the onset oxidation temperature of as-fabricated U 3 Si 2 pellets to 580 °C, which can be further increased to 610 °C by thermal annealing. The Al-doped U 3 Si 2 composite fuels also display simultaneously higher hardness and fracture toughness than un-doped U3Si2. These results highlight an effective strategy by integrating minimal Al additives, microstructure control and post-thermal annealing to design advanced silicide fuels with excellent oxidation resistance, desired thermal-mechanical properties and maintained high fissile element density.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural stability of mechanically alloyed amorphous (FeCoNi) 70 Ti 10 B 20 under high-temperature and high-pressure

Nanostructured (FeCoNi) 70 Ti 10 B 20 (at%) alloy was synthesized by mechanical alloying from elemental powder mixture of Fe, Co, Ni, Ti and B using ball milling. The effect of ball milling time on the evolution of structure and morphology was investigated by X-ray diffraction, scanning and transmission electron microscopy and differential thermal analysis. It was observed that the formation of solid solution of (FeCoNi) 70 Ti 10 B 20 started from the very onset of the milling process. Crystallite size and lattice strains seemed to be leveled off after 20 h of milling with no further major changes. The milling process for longer periods introduced severe plastic deformations causing formation of amorphous phase of (FeCoNi) 70 Ti 10 B 20 . The amorphous alloy composition was confirmed by energy dispersive X-ray spectroscopy analysis that showed an excellent homogeneity of the alloying elements. The phase stability of the mechanically alloyed amorphous sample was further verified by employing high-temperature and high-pressure studies. The alloy samples heat-treated at 700 °C revealed crystallization of the amorphous phase. However, synchrotron-based high-pressure ambient temperature X-ray diffraction studies confirmed that the amorphous phase of the alloy remained stable up to the pressure of 30 GPa. Here, the 50 h milled sample after being annealed at 350 °C showed improvement in the soft magnetic properties of the alloy, which was due to the probable elimination of the residual stress in the amorphous phase of the alloy powders.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Exploring the elastic and electronic properties of chromium molybdenum diboride alloys

We perform first-principles calculations to study the structural, mechanical, thermal, electronic, and magnetic properties of Cr 1-x Mo x B 2 for x = 0.25, 0.33, 0.50, 0.67 and 0.75. Based on structural search methods, we determine the ground-state structure for each concentration. The ternaries are either monoclinic (x = 0.25, 0.75) or trigonal (x = 0.33, 0.50, 0.67). The calculated mechanical properties reveal that the strength of Cr 1-x Mo x B 2 is maximized for x = 0.50. Cr 0.5 Mo 0.5 B 2 exhibits excellent mechanical properties (B = 298 GPa, Y = 558 GPa, G = 235 Gpa, ν = 0.19, H v =27 GPa), surpassing those of β-MoB 2 at a lower cost. All of these ternaries are hard alloys with Vickers hardness greater than 24 GPa. Chemical bonding analysis demonstrates that the strength of the new compounds is related to the alternating planar and buckled B-B layers, as well as the strong TM-B bonds. Finally, the enhanced strength of Cr 0.5 Mo 0.5 B 2 is a consequence of the high density of strong interlayer Cr-Mo metallic bonds around the Fermi level.

36 MATERIALS SCIENCE↗