Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electric conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Coherence in Polycrystalline Thin Films of Twisted Molecular Crystals

Helicoidal crystallites in rhythmically banded spherulites manifest spectacular optical patterns in small molecules and polymers. It is shown that concentric optical bands indicating crystallographic orientations typically lose coherence (in-phase twisting) with growth from the center of nucleation. Here, coherence is shown to increase as the twist period decreases for seven molecular crystals grown from the melt. This dependence was correlated to crystallite fiber thickness and length, as well as crystallite branching frequency, a parameter that was extracted from scanning electron micrographs, and supported by numerical simulations. Hole mobilities for 2,5-didodecyl-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP-C12) measured by using organic field-effect transistors demonstrated that more incoherent boundaries between optical bands in spherulites lead to higher charge transport for films with the same twist period. This was rationalized by combining our growth model with electrodynamic simulations. This work illustrates the emergence of complexity in crystallization processes (spherulite formation) that arises in the extra variable of helicoidal radial twisting. The details of the patterns analyzed here link the added complexity in crystal growth to the electronic and optical properties of the thin films.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Map of the Zintl AM 2 Pn 2 Compounds: Influence of Chemistry on Stability and Electronic Structure

The AM 2 Pn 2 (A= Ca, Sr, Ba, Yb, Mg; M = Zn, Cd, Mg; and Pn = N, P, As, Sb, Bi) family of Zintl phases has been known as thermoelectric materials and has recently gained much attention for highly promising materials for solar absorbers in single-junction and tandem solar cells. In this paper, we will, from first principles, explore the entire family of AM 2 Pn 2 compounds in terms of their ground-state structure, thermodynamic stability, and electronic structure. We also perform photoluminescence spectroscopy on bulk powder and thin film samples to verify our results, including the first measurements of the band gaps of SrCd 2 P 2 and CaCd 2 P 2 . The AM 2 Pn 2 compounds exhibit broad stability, are mostly isostructural to CaAl 2 Si 2 (P$\overline{3}$m1), and cover a wide range of band gaps from 0 to beyond 3 eV. This could make them useful for a variety of purposes, for which we propose several candidates, such as CaZn 2 N 2 for tandem top cell solar absorbers and SrCd 2 Sb 2 and CaZn 2 Sb 2 for infrared detectors. By examining the band structures of the AM 2 Pn 2 , we find that Mg 3 Sb 2 has the most promise as a thermoelectric material due to several off-Γ valence band pockets, which are unique to it among the compositions studied here.

14 SOLAR ENERGY↗
DOE OSTI2025

Molecular Modifications of Crystalline Poly(triazine imide) for Advancing Its Structure–Property Relationships in Light-Driven Catalysis

Carbon-nitride materials represent light-absorbing structures composed of earth-abundant elements capable of being leveraged for semiconductor photocatalysis at their surfaces. This study systematically investigates the addition of molecular modifiers to the synthesis of crystalline carbon nitrides to assess their effects on the materials’ structure, optical bandgap, and photocatalytic activity for hydrogen (H 2 ) and oxygen (O 2 ) evolution under ultraviolet and visible-light irradiation. Melamine and five pyrimidine-centered analogs were employed as building blocks to modify various heteroatoms within the polymeric framework. The modified materials were characterized with attention to the differences introduced by the monomeric modifiers and their influence on the resulting structures and compositions. The findings indicate that these changes significantly broaden the visible-light absorption range, albeit with the gradual loss of the bulk crystalline structure. As the loading of modifiers increased beyond 50%, a predominantly amorphous form of carbon nitride emerged. XPS, 13 C solid-state NMR, and SEM analyses corroborated the changes, which were attributed to modifications of the elemental composition and a reduced amount of Li cations and charge-balancing Cl anions owing to fewer binding sites in the intralayer cavities. In photocatalytic measurements under an ultraviolet 390 nm LED, and aided by photodeposited nanoparticle cocatalysts, the unmodified PTI-LiCl framework demonstrated the highest H 2 evolution rate (HER; 3.44 mmol·g –1 ·h –1 ) with an apparent quantum yield of 5.4%, along with total water splitting at rates of 163 μmol of H 2 ·g –1 ·h –1 and 75.6 μmol·O 2 g –1 ·h –1 . While PTI-LiCl showed trace activity under a visible-light 440 nm LED, all modified materials exhibited enhanced reactivity with as low as 5% molecular modifiers. The photocatalytic rates peaked at a 15% modification level when using 2,4,6-triaminopyrimidine, with rates of 33 μmol·g –1 ·h –1 for HER, along with 19.7 μmol of H 2 ·g –1 ·h –1 and 8.7 μmol of O 2 ·g –1 ·h –1 for total water splitting. Density functional theory calculations were used to probe electronic structure changes resulting from the modifications. Furthermore, these results elucidate the structural, optical, and electronic changes arising from the five selected molecular modifiers and their impact on the semiconductors’ photocatalytic properties.

Electrical conductivity↗
DOE OSTI2026

Photophysical Properties and Phase Behavior of Ultrawide Photovoltaic Bandgap Cesium–Lead-Based Triple Halide Perovskites

Metal halide perovskite films in the top cell of triple-junction tandems require bandgaps around 2.0 eV to achieve current matching, assuming that the middle absorbing layer is the commonly used FAPbI 3 composition and the bottom cell has a bandgap around 1.1 eV. Unfortunately, mixed organic/inorganic metal halide perovskites that have the necessary Br content to reach a bandgap of 2.0 eV segregate into iodine-rich and bromine-rich phases under illumination, limiting their obtainable voltage. Previous reports have shown improved photostability using either Cs-based inorganic compositions or Cl incorporation on the X-site. Here, we investigate the inorganic triple halide compositional space CsPb­(I 1–x–y Br y Cl x ) 3 where bandgaps near 2.0 eV are expected based on the knowledge that CsPbI2Br has a bandgap of 1.90 eV. Incorporation of Cl occurs readily for x ≤ 0.07–0.10 within perovskites with a Br content of 0.3 ≤ y ≤ 0.42. When x >0.1, X-ray diffraction and photoluminescence (PL) measurements indicate that multiple compositional phases form. We hypothesize that the variable sizes of the three halide ions are not supported within the rigid Cs lattice, resulting in the formation of multiple compositional phases. The photoluminescence quantum yield of the single-phase compositional space–CsPb­(I 1–x–y Br y Cl x ) 3 where x ≤ 0.07was typically 0.001–0.004%, most likely as a result of a high defect density, including mobile iodine species. PL light-soaking measurements of many perovskite compositions with bandgaps in the range of 1.89–2.05 eV demonstrate that phase segregation occurs when initial bandgaps are above 1.95 eV regardless of halide content: indicating further iodide oxidation and corresponding migration under illumination. The conclusion is that further compositional or additive engineering is necessary for the development of inorganic triple halide compositions that accomplish the elusive goal of fabricating high-quality and photostable 2.0 eV films for use in multijunction tandems.

Electrical conductivity↗
DOE OSTI2026

Cs X Si 15 P 21 ( X = Sn or Pb): Polar Noncentrosymmetric Si–P Frameworks Stabilized by Covalent X –P Bonding

Metal silicon phosphides composed of earth-abundant Si and P tend to exhibit semiconducting properties and adopt diverse crystal structures with relatively small additions of structure-directing elements. The potential of silicon phosphide materials in nonlinear optical applications has been hindered by the inability to systematically produce noncentrosymmetric structures with such a flexible framework. Here, in this work, two isostructural compounds with a novel noncentrosymmetric structure were made possible by the inclusion of elements with stereochemically active lone pairs (Sn 2+ and Pb 2+ ). The structures were determined through single-crystal and synchrotron powder X-ray diffraction. Analysis of chemical bonding in real space through the electron localization function revealed stereochemically active Pb 2+ and Sn 2+ species in a trigonal pyramidal coordination with {Pb/Sn}–P bonds. Such covalent bonding between Pb and P is quite uncommon in extended solids and has been reported in a few rare instances. Band structure calculations and linear optical measurements confirm the semiconducting nature of Cs X Si 15 P 21 ( X = Sn or Pb). The synthesis was optimized to yield high-purity polycrystalline samples. The nonlinear optical properties show promising second-harmonic generation (SHG) coefficients from the Kurtz–Perry method. First-principles calculations of the nonlinear optical properties support the experimentally determined SHG values and provide moderate values of birefringence, suggesting Cs X Si 15 P 21 could be phase-matchable and practical nonlinear optical materials in the mid-IR region.

crystal structure↗
DOE OSTI2026

Mo 4 FeGa 17.25– x Ge x : Complementary Point Substitutions, Buffering Frameworks, and Merging of the 18-n and Octet Bonding Schemes

We present the discovery of Mo 4 FeGa 17.25–x Ge x (x ∼ 2.1(4), based on determination of Ge content), a complex gallide featuring a variety of point substitution phenomena. Its crystal structure is derived from the Ti 2 Ni type, in which a diamond network of face-sharing octahedra is interpenetrated by a second diamond network of vertex-sharing stella quadrangula. However, while in the ideal Ti 2 Ni type these two frameworks run uninterrupted through the crystal, Mo 4 FeGa 17.25–x Ge x shows three variations. First, the inner tetrahedron of every other stella quadrangula is replaced with a main group atom, creating tetrahedra reminiscent of the Zintl phase NaTl. Next, a selection of Ga 6 octahedra are filled with Fe atoms, in a manner analogous to the stuffed AuCu 3 -type phases. Finally, the refined crystal structure shows that in each unit cell a single Ga2 atom in the octahedral network is substituted with a dumbbell of Ga/Ge atoms. Electronic structure calculations on ordered models of Mo 4 FeGa 17.25–x Ge x reveal a narrow band near the Fermi energy, which is explained in terms of the 18-n and octet bonding schemes using reversed approximation Molecular Orbital analysis. A DFT-chemical pressure analysis connects the tetrahedron/atom and atom/dumbbell substitutions to the relief of atomic packing tensions and highlights soft atomic motions within the octahedral framework and driving forces for atom/dumbbell substitution. The combination of soft vibrational modes, disorder, and a narrow band gap could make this phase of interest for potential thermoelectric properties.

Chemical structure↗
DOE OSTI2020

Tin–Lead Alloying for Efficient and Stable All-Inorganic Perovskite Solar Cells

Cesium containing all-inorganic perovskites have received considerable interest in photovoltaics research because of their potential for improved stability compared to their organic-inorganic hybrid counterparts. However, the inorganic perovskites studied thus far still suffer from lower power conversion efficiency and long-term instability, due to an unfavorable bandgap and either phase instability or air-sensitivity. Herein, A strategy to mitigate these concerns is investigated by alloying tin and lead on the B site to form tin-lead alloyed low-bandgap (~1.34 eV) inorganic CsSn 0.3 Pb 0.7 I 3 perovskites. Solar cells made using this material in an inverted full-structured architecture with a PEDOT:PSS hole transport materials (HTM) attain power conversion efficiency (PCE) up to 9.41% (stabilized PCE 7.23%). Furthermore, a simple HTM-free device without PEDOT:PSS layer is demonstrated more stable than the full-structured device and exhibits a PCE of 7.60% (stabilized PCE 7.31%) – the highest efficiency to date for an inorganic perovskite with a bandgap below 1.40 eV. This simplified device structure shows good reproducibility and stability. Finally, this work provides a possible route for fabricating low-cost, high stability devices with competitive efficiencies.

14 SOLAR ENERGY↗
DOE OSTI2021

Centrosymmetric or Noncentrosymmetric? Transition Metals Talking in K 2 TGe 3 S 8 (T = Co, Fe)

Two new quaternary sulfides K 2 TGe 3 S 8 (T=Co, Fe) have been synthesized by a high-temperature solid-state routine and flux growth method. The crystal growth process of K 2 TGe 3 S 8 (T=Co, Fe) was elucidated by in-situ powder X-ray diffraction and DSC thermal analysis. The mm-sized crystals of K 2 TGe 3 S 8 (T=Co, Fe) were grown. K 2 CoGe 3 S 8 crystallizes in a new structure type in centrosymmetric space group P1¯ (No. 2) with unit cell parameters of a = 7.016(1) Å, b = 7.770(1)Å, c = 14.342(1) Å, α = 93.80(1)°, β = 92.65(1)°, γ = 114.04(1)°. K 2 FeGe 3 S 8 crystallizes in K 2 FeGe 3 Se 8 structure type and the noncentrosymmetric space group P2 1 (No. 4) with unit cell parameters of a = 7.1089(5)Å, b = 11.8823(8)Å, c = 16.7588(11)Å, β = 96.604(2)°. There is a high structural similarity between K 2 CoGe 3 S 8 and K 2 FeGe 3 S 8 . The larger volume coupled with higher degrees of distortion of [FeS 4 ] tetrahedra compared to [CoS 4 ] tetrahedra accounts for the structure’s shift from centrosymmetric to noncentrosymmetric. The theory simulation confirms that [TS 4 ]T= Co or Fe tetrahedra play a crucial role in controlling the structure and properties of K 2 TGe 3 S 8 (T = Co, Fe). The measured optical bandgaps of K 2 CoGe 3 S 8 and K 2 FeGe 3 S 8 are 2.1(1) eV and 2.6(1) eV respectively. K 2 FeGe 3 S 8 shows antiferromagnetic ordering at 24K while no magnetic ordering was detected in K 2 CoGe 3 S 8 . In conclusion, the magnetic measurements also demonstrate the divalent nature of transition metals in K 2 TGe 3 S 8 (T = Co, Fe).

36 MATERIALS SCIENCE↗
DOE OSTI2022

Cubic Crystal Structure Formation and Optical Properties within the Ag–B II –M IV –X (B II = Sr, Pb; M IV = Si, Ge, Sn; X = S, Se) Family of Semiconductors

Quaternary chalcogenide semiconductors are promising materials for energy conversion and nonlinear optical applications, with properties tunable primarily by varying the elemental composition and crystal structure. Here, we first analyze the connections among several cubic crystal structure types, as well as the orthorhombic Ag 2 PbGeS 4 -type structure, reported for select members within the Ag–B II –M IV –X (B II = Sr, Pb; M IV = Si, Ge, Sn; X = S, Se) compositional space. Focusing on the Ag–Pb–Si–S and Ag–Sr–Sn–S systems, we show that one structure type, with the formulas Ag 2 Pb 3 Si 2 S 8 and Ag 2 Sr 3 Sn 2 S 8 , is favored. We have prepared powder and single-crystal samples of Ag 2 Pb 3 Si 2 S 8 and Ag 2 Sr 3 Sn 2 S 8 , showing that each takes on the noncentrosymmetric cubic space group I$\bar{43}$d and is isostructural to the previously reported compound Ag 2 Sr 3 Ge 2 Se 8 . Through hybrid density functional theory calculations, these cubic compounds are demonstrated to be (quasi-)direct band gap semiconductors with high densities of states at the band maxima. Furthermore, the band-gap energies are measured by reflectance spectroscopy as 1.95(3) and 2.66(4) eV for Ag 2 Pb 3 Si 2 S 8 and Ag 2 Sr 3 Sn 2 S 8 , respectively. We further measure the optical properties and show the electronic band structures of three other isostructural A I –B II –M IV –X-type materials, i.e., Ag 2 Sr 3 Si 2 S 8 , Ag 2 Sr 3 Ge 2 S 8 , and Ag 2 Sr 3 Ge 2 Se 8 , showing that the band gaps can be predictably tuned by element substitution. Detailed visual analyses of the different structures and of their relationships with other members of the Ag–B II –M IV –X compositional family provide a basis for a broader understanding of the structure formation and optoelectronic properties within the quaternary chalcogenide semiconductor family.

14 SOLAR ENERGY↗
DOE OSTI2022

Accessing One-Dimensional Chains of Halogenoindates(III) in Organic–Inorganic Hybrids

Organic-inorganic hybrids of halogenoindates(III) are typically represented by one of the zero-dimensional units: InX 4 – , InX 5 2– , InX 6 3– , or In 2 X 11 5– . Higher dimensional anionic forms, although not forbidden, have remained almost elusive. Here, in this study, we report for the first time In 3+ -based organic–inorganic hybrids, (C 4 H 5 N 2 S) 2 InCl 5 and (C 4 H 5 N 2 S) 2 InBr 5 , with 1D anionic chains of trans-halide-bridged InX 6 octahedra whose formation is guided by 2-mercaptopyrimidinium cations (C 4 H 5 N 2 S + ). The chains are characterized by the significant ease of deformation, which is reflected in the elongation of the bridging bonds or the displacement of In 3+ ions. The materials show a robust band gap predominantly governed by C 4 H 5 N 2 S + cations. Dielectric relaxation processes in (C 4 H 5 N 2 S) 2 InBr 5 arise from the cations’ dynamics and suggest the ability of the brominated system to accommodate even larger cations. Our work represents a successful attempt to expand the structural diversity of halogenoindates(III) and opens a pathway to reach multifunctional 1D In 3+ -based hybrids.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Structure and Magnetic Properties of Pseudo-1D Chromium Thiolate Coordination Polymers

The synthesis, structure, and magnetic properties of two novel, pseudo-one-dimensional (1D) chromium thiolate coordination polymers (CPs), CrBTT and Cr2BDT3, are reported. The structures of these materials were determined using X-ray powder diffraction revealing highly symmetric 1D chains embedded within a CP framework. The magnetic coupling of this chain system was measured by SQUID magnetometry, revealing a switch from antiferromagnetic to ferromagnetic behavior dictated by the angular geometrical constraints within the CP scaffold consistent with the Goodenough–Kanamori–Anderson rules. Intrachain magnetic coupling constants J NN of –32.0 and +5.7 K were found for CrBTT and Cr 2 BDT 3 , respectively, using the 1D Bonner–Fisher model of magnetism. The band structure of these materials has also been examined by optical spectroscopy and density functional theory calculations revealing semiconducting behavior. Furthermore, our findings here demonstrate how CP scaffolds can support idealized low-dimensional structural motifs and dictate magnetic interactions through tuning of geometry and inter-spin couplings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Triel-Defined Helicity in One-Dimensional III–VI–VII van der Waals Crystals

Inorganic extended lattice solids that bear complex helical motifs manifest unusual physical and quantum states that arise due to their noncentrosymmetric or chiral nature. However, the systematic understanding of how elemental composition influences the structure and physical properties in helical inorganic crystals has been precluded by the rarity of these materials and the lack of modular phases that display such motifs. Here, we report the synthesis of AlSeI single crystals, the first aluminum-containing helical crystal in the III-VI-VII 1D van der Waals class. AlSeI completes the experimentally accessible triel series in the helical selene iodides alongside InSeI and GaSeI. Using the Al, Ga, and In triel series in this selene iodide class, we experimentally demonstrate the evolution of the local quasi-tetrahedral building unit geometry, chain packing, helical parameters, and band gaps based primarily on the identity of the triel atom. Our results underscore the chemical modularity of these phases, the broad range of helical parameters, and the spectrum of electronic states from the visible to the ultraviolet range in this emergent class of 1D, exfoliable, and helical extended lattice solids.

Chemical structure↗
DOE OSTI2025

Flux-Assisted Boron Chalcogen Mixture (BCM) Method for Synthesizing Mixed Chalcogenide Semiconductors (AkRE 2 Si 2 Se x S 8– x and CaRE 2 Si 2 Se 8 ) ( Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm): Investigation of Their Magnetic and Optical Properties

We report a detailed structural analysis of a series of ten quaternary rare-earth-containing seleno-thiosilicates AkRE 2 Si 2 Se x S 8-x and selenosilicates, CaRE 2 Si 2 Se 8 (Ak = Ca and Sr; RE = La, Ce, Pr, Nd, and Sm). Single crystals were obtained by using the flux-assisted boron chalcogen mixture (BCM) method and single crystal X-ray diffraction was used to determine their structures. All members of the AkRE 2 Si 2 Se x S 8-x and CaRE 2 Si 2 Se 8 series crystallize in the space group R$\bar{3}$c (space group number 167) of the trigonal crystal system. The single-crystal X-ray diffraction analysis revealed a strong preference for Se/S atoms to occupy one vs. the other of the two available sites. Polycrystalline samples were used for magnetic susceptibility and UV–visible diffuse reflectance measurements. Magnetic measurements show that CaCe₂Si₂Se₁.₇₃S₆.₂₇ and CaNd₂Si₂Se₂.₅S₅.₅ are paramagnetic with negative Weiss constants (θ = –60.1 and –26.2). Diffuse reflectance analysis gives optical band gaps of 2.7(1) eV (CaLa₂Si₂Se₂.₃₈S₅.₆₂), 2.2(1) eV (CaCe₂Si₂Se₁.₇₃S₆.₂₇), 2.5(1) eV (CaNd₂Si₂Se₂.₅S₅.₅), and 2.0(1) eV (CaCe₂Si₂Se₈), consistent with density functional theory calculations. By partially or fully replacing S sites with Se it was possible to achieve band gap tuning. Photoluminescence behavior was also investigated for CaCe 2 Si 2 Se 1.73 S 6.27 via irradiation with 375 nm ultraviolet light.

BCM method↗
DOE OSTI2020

Tunable Perovskite-Derived Bismuth Halides: Cs 3 Bi 2 (Cl 1– x I x ) 9

Bismuth-based perovskites are of interest as safer alternatives to lead-based optoelectronic materials. Prior studies have reported on the compounds Cs 3 Bi 2 Cl 9 , Cs 3 Bi 2 I 9 , and Cs 3 Bi 2 Cl 3 I 6 . Here we examine a range of compounds of the formula Cs 3 Bi 2 (Cl 1–x I x ) 9 , where x takes values from 0.09 to 0.52. Powder and single-crystal X-ray diffraction were used to determine that all of these compounds adopt the layered vacancy-ordered perovskite structure observed for Cs 3 Bi 2 Cl 3 I 6 , which is also the high-temperature phase of Cs 3 Bi 2 Cl 9 . We find that, even with very small iodine incorporation, the structure is switched to that of Cs 3 Bi 2 Cl 3 I 6 , with I atoms displaying a distinct preference for the capping sites on the BiX 6 octahedra. Optical absorption spectroscopy was employed to study the evolution of optical properties of these materials, and this is complemented by density functional theory electronic structure calculations. Finally, three main absorption features were observed for these compounds, and with increasing x, the lowest-energy features are red-shifted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hollow Au Nanosphere-Cu 2 O Core–Shell Nanostructures with Controllable Core Surface Morphology

Design of metal-semiconductor interfaces and heterostructures is of strong interest for various catalytic applications including photocatalysis. Here, a series of hollow Au nanosphere (HGN)-Cu 2 O core-shell nanostructures with varying core surface rugosities are synthesized and investigated for possible photocatalytic applications. HGN surface rugosity is tuned by pH modification during galvanic exchange, and carboxyl groups are utilized as coordination sites to deposit uniform Cu 2 O shells onto the gold surfaces. Final core-shell structures are verified by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), and X-ray diffraction (XRD). Information regarding chemical state and electronic band structure is acquired by X-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). Ultrafast transient absorption (TA) reveals that charge separation in bumpy HGN (bHGN)-Cu 2 O may effectively provide longer-lived photoexcited carriers, offering great potential for utilization in advanced photocatalytic processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗