Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Latitude variation of recurrent fluxes in the outer solar system

Recurrent low energy (greater than or = to 0.5 MeV) proton flux enhancements, reliable indicators of corotating plasma interaction regions, were observed on the Voyager 1 and 2 and Pioneer 11 spacecraft in the heliographic latitude range 2 deg S to 23 N and the heliocentric radial range 11 to 20 AU. After a period of rather high correlation between fluxes at different latitudes in early 1983, distinct differences developed in the fluxes during an overall flux decrease. The flux intensities returned to higher levels in early 1984 and differences in both the recurrence frequency and flux intensity persisted into 1985, as Voyager 1 traveled to 23 AU and 25 N latitude. Intercomparison of data from the three spacecraft indicates that the flux differences are most likely due to latitudinal rather than radial or temporal variations.

Christon, S. P.↗

Beam breakup instability studies of powerful energy recovery linac for experiments

The maximum achievable beam current in an energy recovery linac (ERL) is often constrained by beam breakup (BBU) instability. Our previous research highlighted that filling patterns have a substantial impact on BBU instabilities in multipass ERLs. In this study, we extend our investigation to the eight-cavity model of the Powerful ERL for Experiment (PERLE). We evaluate its requirements for damping cavity higher order modes (HOMs) and propose optimal filling patterns and bunch timing strategies. Our findings reveal a significant new insight: while filling patterns are crucial, the timing of bunches also plays a critical role in mitigating HOM beam loading and BBU instability. This previously underestimated factor is essential for effective BBU control. We estimated the PERLE threshold current using both analytical and numerical models, incorporating the designed PERLE HOM dampers. During manufacturing, HOM frequencies are expected to vary slightly. Our study found no significant difference in BBU suppression for relative rms frequency jitters of 0.001, 0.002, and 0.005 for the same HOM. Introducing a jitter of 0.001 into our models, we found that the dampers effectively suppressed BBU instability, achieving a threshold current an order of magnitude higher than the design requirement. Our results offer new insights into ERL BBU beam dynamics and have important implications for the design of future ERLs. Published by the American Physical Society 2025

43 PARTICLE ACCELERATORS↗

Sensors for Pointing Moving Instruments Toward Each Other

Optoelectronic sensor systems are being developed for use in maintaining fixed relative orientations of two scientific-instrument platforms that are in relative motion. In the original intended application, the platforms would be two spacecraft flying in formation and separated by a long baseline. In principle, sensor systems of this type could also be used in terrestrial applications for maintaining alignments between moving instrument platforms. The sensor system would utilize beacon laser beams that would be transmitted by the platforms in the normal course of scientific measurements. The frequency of the returned laser beam would differ by about 5 MHz. On each platform, the transmitted laser beam and the laser beam bounced off the other platform would be focused onto a quadrant photodetector, where the interference between the laser beams would give rise to sinusoidal (beat-frequency) signals on all four quadrants. The differences among the phases of the beat-frequency signals in the quadrants would depend on, and would be used to determine the angle between, the wave fronts of the outgoing and incoming laser beams.

Liebe, Carl↗

Rotation of the coronal magnetic field

The coronal magnetic field rotates differently than the photosphere. The field configuration of the corona can be calculated from the observed photosphpere field using a potential field model. Correlation of the field patterns at different latitudes with a lag near one solar rotation shows much less differential rotation than observed in the photospheric field; however, the peak is very broad and determines the rotation rate rather poorly. Consideration of longer lags reveals a more complex rotational structure and indicates different rotation rates in the Northern and Southern Hemispheres. Spectral analysis of the equatorial dipole component of the coronal field reveals an organization into just a few discrete rotation frequencies which are apparently present simultaneously. Spectral analysis of the field at different latitudes shows that the frequencies are present simultaneously. Spectra analysis of the field at different latitudes shows that the frequencies are present simultaneously, but in different hemispheres, and that the Southern Hemisphere fields rotate more slowly than those in the north in solar cycle 21.

Hoeksema, J. T.↗

Multispacecraft observations of the harmonic structure of Pc 3-4 magnetic pulsations

Harmonically related Pc 3-4 pulsations (7-100 mHz) are observed simultaneously by the three geosynchronous satellites ATS 6, SMS 1, and SMS 2, which are separated 20 deg from one another. At a given instant the frequency of the same harmonic is different from one spacecraft to another and each spacecraft observes a decrease in the fundamental frequency as it moves from morning (15 mHz) to afternoon (10 mHz). This frequency behavior is explained in terms of standing Alfven waves, for which the frequency is determined by the local magnetic field and plasma density. Occurrence of harmonic Pc 3-4 waves only during daytime hours (0400-2000 LT) and their frequency characteristics suggest a broadband energy source located on the dayside. Possible azimuthal wave number m and azimuthal phase velocity V(phi) of the second through fourth harmonics are determined from an unusual interval during which identical harmonic frequencies were observed at SMS 1 and ATS 6. Under the assumption of tailward propagation of constant-phase fronts at the same velocity for all these harmonics, V(phi) of about 1700 km/s is obtained.

Takahashi, K.↗

A measurement of the cosmic microwave background temperature at 7.5 GHz

The temperature of the cosmic microwave background (CMB) radiation at a frequency of 7.5 GHz (4 cm wavelength) is measured, obtaining a brightness temperature of T(CMB) = 2.70 +/- 0.08 K (68 percent confidence level). The measurement was made from a site near the geographical South Pole during the austral spring of 1989 and was part of an international collaboration to measure the CMB spectrum at low frequencies with a variety of radiometers from several different sites. This recent result is in agreement with the 1988 measurement at the same frequency, which was made from a different site with significantly different systematic errors. The combined result of the 1988 and 1989 measurements is 2.64 +/- 0.06 K.

Levin, S.↗

Low-Frequency Coherence Break in the Soft X-Ray State of GRS 1915+105

We present results from the analysis of X-ray power density spectra and coherence when GRS 1915+105 is in soft states. We use three data sets that belong to mu, phi, and delta classes as found in the work of Belloni et al. We find that the power density spectra appear t o be complex, with several features between 0.01 and 10 Hz. The coherence deviates from unity above a characteristic frequency. We discuss our results from different models. The corona size in the sphere-disk model implied by this break frequency is on the order of 10(exp 4) GM/c(exp 2), which is unphysical. Our results are more consistent with the prediction of the model of a planar corona sustained by magnetic flares, in which the characteristic frequency is associated with the longest timescale of an individual flare, which is about 8 s.

Ji, Jian-Feng↗

PV-Fed Smart Inverters for Mitigation of Voltage and Frequency Fluctuations in Islanded Microgrids

The presence of low-inertia distributed generation (DG) units makes islanded microgrids vulnerable to voltage and frequency variations. Besides, the considerable difference between the inertia of synchronous-based and inverter-based DGs results in a power imbalance between supply and demand during abnormal conditions. As a result, both voltage and frequency of microgrid ac-bus start oscillating which might have severe consequences such as blackouts. This paper deploys the traditional controller of photovoltaic (PV) units to improve the dynamic behavior of islanded microgrids by suppressing the voltage and frequency fluctuations. To this end, an adaptive piecewise droop (APD) characteristic is proposed and employed in PV units to attain a faster balance between generation and consumption during transients, leading to an enhanced frequency response. Besides, the reactive-power control loop is equipped with a droop characteristic which enables the PV units to inject/absorb reactive power during transients and participate in voltage-profile enhancement of the system. Case study results are presented using PSCAD/EMTDC to confirm the validity of proposed method in improving the dynamics of islanded microgrids.

Pilehvar, Mohsen S.↗

N -way parametric frequency beamsplitter for quantum photonics

Optical networks are the leading platform for the transfer of information due to their low loss and ability to scale to many information channels using optical frequency modes. To fully leverage the quantum properties of light in this platform, it is desired to manipulate higher-dimensional superpositions by orchestrating linear, beamsplitter-type interactions between several channels simultaneously. We propose a method of achieving simultaneous, all-to-all coupling between N optical frequency modes via N -way Bragg-scattering four-wave mixing. By exploiting the frequency degree of freedom, additional modes can be multiplexed in an interaction medium of fixed volume and loss while avoiding the introduction of excess noise. We generalize the theory of the frequency-encoded two-mode interaction to N modes under this four-wave-mixing approach, finding that arbitrary unitary transformations are possible through successive four-wave-mixing pump configurations. We experimentally verify the quantum nature of this scheme by demonstrating three-way multiphoton interference. Two input photons are shared among three frequency modes and display interference differing from that of two classical (coherent-state) inputs. These results show the potential of our approach for the scalability of photonic quantum information processing to general N -mode systems in the frequency domain. Published by the American Physical Society 2025

Oliver, Richard (ORCID:0000000207760657)↗

Machine Learning Inference of Random Medium Properties

Earth materials are heterogeneous across a range of spatial scales, but the resolvability of small structures is limited by sparse data coverage, noise, bandlimitedness, and other difficulties. In practice, heterogeneities below a certain size cannot be recovered from seismic data except through statistical medium descriptions, which even then can be difficult to uniquely determine. To improve the characterization of such heterogeneities, we develop a novel supervised machine learning (ML) model that provides insight about the recoverability of statistical medium properties from elastic waveform data and succeeds despite cycle-skipping and other challenges well known from elastic waveform inversion. We demonstrate the approach using random media generated by superimposing self-affine random variations on homogeneous and layered background structures. After training on sparsely-recorded, high-frequency waveforms from hundreds of different random medium realizations, we show the ability of our ML model to recover correlation lengths and other statistical properties of interest to near-surface and crustal seismology, among other fields. For frequency passbands and spatial offsets encountered in seismology, Gaussian correlation lengths and the amplitude of the random variations relative to the background model are recovered even in challenging scenarios involving unknown medium parameters, complex crustal structures, and low signal-to-noise ratio. In comparison, von Kármán correlation lengths, which are related to larger-wavelength variations of the medium than Gaussian correlation lengths, are not as well recovered. These results provide one of the first and most systematic investigations of the recoverability of statistical properties of heterogeneities below the resolution limit of deterministic seismic tomography, and suggest practical ML strategies for high-frequency waveform seismology.

58 GEOSCIENCES↗

Observations of intermediate degree solar oscillations - 1989 April-June

Frequencies, splittings, and line widths from 85 d of full disk Doppler observations of solar p-modes taken between April 4 and June 30, 1989 are presented. Comparison of the present mode parameters with published Big Bear Solar Observatory (BBSO) results yields good agreement in general and is thus a confirmation of their work using an independent instrument and set of analysis routines. Average differences in p-mode frequencies measured by the two experiments in spring-summer 1989 are explained as a result of differences in the exact periods of data collection during a time of rapidly changing solar activity. It is shown that the present a(1) splitting coefficients for p-modes with nu/L less than 45 micro-Hz suffer from a significant systematic error. Evidence is presented to the effect that a detector distortion or alignment problem, not a problem with the power spectra analysis, is the most likely explanation of this a(1) anomaly.

Bachmann, Kurt T.↗

Nonlinear dynamics of multiple Alfvén modes driven by trapped energetic ions in tokamaks: A triplet paradigm

Non-linear dynamics of multiple infernal Alfvén eigenmodes—a subset of global Alfvén eigenmodes in tokamak plasmas with extended low-shear central core [Marchenko et al., Phys. Plasmas 16, 092502 (2009)]—is studied. The analysis is carried out for a mode triplet with toroidal mode-numbers n=1, 2, 3. It was assumed that the n = 1 mode was linearly unstable due to precession resonance with trapped fast ions, whereas the other modes were linearly damped. The modes were coupled due to a non-linearity in a bounce-averaged drift kinetic equation for the distribution function of fast ions. Nonlinear equations for the mode amplitudes and phases are derived and solved numerically. It is found that the temporal evolution of the amplitudes and the phase (responsible for the frequency chirping) of the modes exhibit Hopf bifurcations to stable limit cycles. This can explain a synchronous cyclic destabilization of multiple modes in Alfvén avalanches (sudden growth of amplitudes of the mode cluster with different n and approximately equal frequency spacing) in NSTX and bursting modes in MAST—events, which resulted in enhanced loss of fast ions.

Marchenko, V. S. (ORCID:0000000261480533)↗

An upper limit on the hardness of the nonthermal electron spectra produced during the flash phase of solar flares.

The observations of impulsive solar-flare X-rays above 10 keV made with OGO-5 satellite have been analyzed in order to study the variation of the nonthermal electron spectrum from one flare to another. The X-ray spectrum at the maxima of 129 impulsive X-ray bursts is represented by KE to the minus-gamma power photons per sq cm per sec per keV, and the frequency of occurrence of bursts with different values of gamma is studied. It is found that for gamma less than 4.0 the frequency of bursts rapidly decreases with the decrease in the value of gamma. The probability of occurrence of a burst with gamma less than 2.3 is extremely small.

Kane, S. R.↗

Investigation of a quadrupole ultra-high vacuum ion pump

The new nonmagnetic ion pump resembles the quadrupole ionization gage. The dimensions are larger, and hyperbolically shaped electrodes replace the four rods. Their surfaces follow y sq. = 36 + x sq. (x, y in centimeters). The electrodes, 55 cm long, are positioned lengthwise in a tube. At one end a cathode emits electrons; at the other end a narrowly wound flat spiral of tungsten clad with titanium on cathode potential can be heated for titanium evaporation. Electrons accelerated by a dc potential of the surface electrodes oscillate between the ends on rotational trajectories, if a high frequency potential superimposed on the dc potential is properly adjusted. Pumping speeds (4-100 liter/sec) for different gases at different peak voltages (1000-3000V) at corresponding frequencies (57-100 MHz), and at different pressures 0.00001 to the minus 9 power Torr were observed. The lowest pressure reached was below 10 to the minus 10 power Torr.

Schwarz, H. J.↗

An exploratory study of finite difference grids for transonic unsteady aerodynamics

A pulse-transfer function technique for calculating unsteady aerodynamic forces for a wide range of reduced frequencies is implemented in a finite difference program solving the complete unsteady transonic small perturbation equation. Forces are calculated for a two-dimensional linear flat plate case utilizing the default grids from several currently used finite difference programs. The forces are compared to exact theoretical values and grid generated boundary and internal reflections are demonstrated. Grids designed to alleviate the reflections are presented and forces for a 6% thick parabolic arc airfoil are calculated to investigate non-linear transonic effects.

Seidel, D. A.↗

UTC Dissemination to the Real-Time User

The current definition of Coordinated Universal Time (UTC) dates from 1972. The duration of a UTC second is defined in terms of the frequency of a hyperfine transition in the ground state of cesium. This standard frequency is realized in a number of different laboratories using ensembles of commercial cesium clocks and a few primary frequency standards. The data from all of these devices are transmitted periodically to the Bureau International des Poids et Mesures (BIPM) in Sevres, France, where they are combined in a statistical procedure to produce International Atomic Time (TAI). The time of this scale is adjusted as needed ('coordinated') by adding or dropping integer seconds so as to keep it within plus or minus 0.9 s of UT1, a time scale based on the observation of the transit times of stars and corrected for the predicted seasonal variations in these observations. When the leap seconds are included into TAI, the result is called UTC. The difference between TAI and UTC is therefore an exact integer number of seconds. This difference is currently 29 s and will become 30 s at 0 UTC on 1 January 1996.

Levine, Judah↗

STAIR 2.0: A Generic and Automatic Algorithm to Fuse Modis, Landsat, and Sentinel-2 to Generate 10 m, Daily, and Cloud-/Gap-Free Surface Reflectance Product

Remote sensing datasets with both high spatial and high temporal resolution are critical for monitoring and modeling the dynamics of land surfaces. However, no current satellite sensor could simultaneously achieve both high spatial resolution and high revisiting frequency. Therefore, the integration of different sources of satellite data to produce a fusion product has become a popular solution to address this challenge. Many methods have been proposed to generate synthetic images with rich spatial details and high temporal frequency by combining two types of satellite datasets—usually frequent coarse-resolution images (e.g., MODIS) and sparse fine-resolution images (e.g., Landsat). In this paper, we introduce STAIR 2.0, a new fusion method that extends the previous STAIR fusion framework, to fuse three types of satellite datasets, including MODIS, Landsat, and Sentinel-2. In STAIR 2.0, input images are first processed to impute missing-value pixels that are due to clouds or sensor mechanical issues using a gap-filling algorithm. The multiple refined time series are then integrated stepwisely, from coarse- to fine- and high-resolution, ultimately providing a synthetic daily, high-resolution surface reflectance observations. We applied STAIR 2.0 to generate a 10-m, daily, cloud-/gap-free time series that covers the 2017 growing season of Saunders County, Nebraska. Moreover, the framework is generic and can be extended to integrate more types of satellite data sources, further improving the quality of the fusion product. View Full-Text

47 OTHER INSTRUMENTATION↗

Global optimization of harmonic oscillator basis in covariant density functional theory

The present investigation focuses on the improvement of the accuracy of the description of binding energies within moderately sized fermionic basis. Using the solutions corresponding to infinite fermionic basis it was shown that in the case of meson exchange (ME) covariant energy density functionals (CEDFs) the global accuracy of the description of binding energies in the finite $N_F$ = 16 - 20 bases can be drastically (by a factor ranging from ~3 up to ~9 dependent on the functional and $N_F$) improved by a global optimization of oscillator frequency of the basis. This is a consequence of the unique feature of the ME functionals in which with increasing fermionic basis size fermionic and mesonic energies approach the exact (infinite basis) solution from above and below, respectively. As a consequence, an optimal oscillator frequency $\hbar\omega_0$ of the basis can be defined which provides an accurate reproduction of exact total binding energies by the ones calculated in truncated basis. This leads to a very high accuracy of the calculations in moderately sized $N_F=20$ basis when mass dependent oscillator frequency is used: global rms differences $\delta B_{rms}$ between the binding energies calculated in infinite and truncated bases are only 0.025 MeV and 0.031 MeV for the NL5(Z) and DD-MEZ functionals, respectively. Optimized values of the oscillator frequency $\hbar\omega_0$ are provided for three major classes of CEDFs, i.e. for density dependent meson exchange functionals, nonlinear meson exchange ones and point coupling functionals.

Binding energy & masses↗