Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Sensation of rotation about a vertical axis with a fixed visual field in different illuminations and in the dark

The effects of the oculogyro illusion of the relative motion of a spot fixed with respect to the subject during subject rotation and of a fixed striped peripheral visual field under different levels of illumination on perceptions of rotation about a vertical axis are investigated. Subjects were seated in a rotatable flight trainer cockpit with visual fields consisting of darkness, a dim peripheral field, and a bright peripheral field, all fixed with respect to the subject, and subject perceptual thresholds, frequency responses and sensations of displacement and velocity were measured during trainer rotation at constant and varying angular accelerations. The perception of angular acceleration is found to exhibit a significantly lower threshold and a reduced latency time in the illuminated visual fields which was independent of the level of illumination. Subjective frequency responses showed a higher gain in the illuminated presentations, while subjective displacements during triangular velocity stimuli exhibited no difference for the different visual cues. Finally, magnitude estimations of the after-rotation associated with deceleration from a constant velocity showed a greater rising speed, larger velocity and longer duration under illumination. Results show that, for low accelerations, the visual input enhances sensitivity to self-motion, an effect explained by the oculogyral illusion.

Huang, J.↗

Numerical stability of an explicit finite difference scheme for the solution of transient conduction in composite media

A theoretical evaluation of the stability of an explicit finite difference solution of the transient temperature field in a composite medium is presented. The grid points of the field are assumed uniformly spaced, and media interfaces are either vertical or horizontal and pass through grid points. In addition, perfect contact between different media (infinite interfacial conductance) is assumed. A finite difference form of the conduction equation is not valid at media interfaces; therefore, heat balance forms are derived. These equations were subjected to stability analysis, and a computer graphics code was developed that permitted determination of a maximum time step for a given grid spacing.

Campbell, W.↗

Development of low-frequency kernel-function aerodynamics for comparison with time-dependent finite-difference methods

Finite difference methods for unsteady transonic flow frequency use simplified equations in which certain of the time dependent terms are omitted from the governing equations. Kernel functions are derived for two dimensional subsonic flow, and provide accurate solutions of the linearized potential equation with the same time dependent terms omitted. These solutions make possible a direct evaluation of the finite difference codes for the linear problem. Calculations with two of these low frequency kernel functions verify the accuracy of the LTRAN2 and HYTRAN2 finite difference codes. Comparisons of the low frequency kernel function results with the Possio kernel function solution of the complete linear equations indicate the adequacy of the HYTRAN approximation for frequencies in the range of interest for flutter calculations.

Bland, S. R.↗

Comparing the relationships between noise level and annoyance in different surveys - A railway noise vs. aircraft and road traffic comparison

Annoyance expressed in a railway noise survey is compared with that from two road traffic and three aircraft surveys in order to determine whether responses to various types of environmental noise are source-specific. Railway noise is found to be less annoying than other noises at any given high noise level. Railway noise annoyance rises less rapidly with increasing noise level. At high levels, this gap in reactions averages about 10 dB; it ranges from 4 dB to more than 20 dB. The methods used for comparing the surveys are examined. It is found that methodological uncertainties lead to imprecise comparisons and that different annoyance scales yield different estimates of intersurvey differences.

Fields, J. M.↗

A comparison between satellite-defined and parameterized land-water differences in emitted longwave radiation

An analysis is performed to qualitatively compare the seasonal variation in emitted longwave radiation over land and over water areas as determined from 12 months of Nimbus 6 satellite data with that defined from parameterizations of this radiation budget component. These variations are noted when land and water surface areas are mapped to corresponding areas at the 'top' of the atmosphere. Variations of a surface-temperature-dependent parameterization of emitted longwave radiation originally suggested by Budyko (1969) are considered. The longwave radiation parameterizations indicate small differences between land and water profiles of emitted longwave radiation at the top of an atmospheric column in low latitudes in comparison to large differences in this feature shown to exist in the satellite data. The small differences are noted in linear parameterizations of emitted flux when zonally-averaged satellite data are used to define equation coefficients.

Stephenson-Graves, D.↗

The growth of prognostic differences between GLAS model forecasts from SAT and NOSAT initial conditions

A study has been conducted to determine the cause of a major synoptic difference in the 72 h GLAS model forecasts from 0000 GMT 19 February 1976 that resulted from the inclusion of satellite data. The prognostic differences that resulted in diverging cyclone paths between the forecast that included satellite temperature soundings (SAT) and the forecast that excluded satellite sounding data (NOSAT) have been traced to initial state differences in the upper level wind and temperature patterns. These modifications enhanced the variation of thermal vorticity and thermal advection across the cyclone center and in the SAT case, gave a greater initial rate of movement of the upper-level vorticity maximum associated with the surface cyclone.

Atlas, R.↗

Nonlinear truncation error analysis of finite difference schemes for the Euler equations

It is pointed out that, in general, dissipative finite difference integration schemes have been found to be quite robust when applied to the Euler equations of gas dynamics. The present investigation considers a modified equation analysis of both implicit and explicit finite difference techniques as applied to the Euler equations. The analysis is used to identify those error terms which contribute most to the observed solution errors. A technique for analytically removing the dominant error terms is demonstrated, resulting in a greatly improved solution for the explicit Lax-Wendroff schemes. It is shown that the nonlinear truncation errors are quite large and distributed quite differently for each of the three conservation equations as applied to a one-dimensional shock tube problem.

Klopfer, G. H.↗

Time dependent wave envelope finite difference analysis of sound propagation

A transient finite difference wave envelope formulation is presented for sound propagation, without steady flow. Before the finite difference equations are formulated, the governing wave equation is first transformed to a form whose solution tends not to oscillate along the propagation direction. This transformation reduces the required number of grid points by an order of magnitude. Physically, the transformed pressure represents the amplitude of the conventional sound wave. The derivation for the wave envelope transient wave equation and appropriate boundary conditions are presented as well as the difference equations and stability requirements. To illustrate the method, example solutions are presented for sound propagation in a straight hard wall duct and in a two dimensional straight soft wall duct. The numerical results are in good agreement with exact analytical results.

Baumeister, K. J.↗

Simulation of transonic separated airfoil flow by finite difference viscous-inviscid interaction

A finite difference viscous inviscid interaction program has been developed for simulating the separated transonic flow about lifting airfoils, including the wake. In contrast to most interaction programs, this code combines a finite difference boundary layer algorithm with the inviscid program. The recently developed finite difference boundary layer code efficiently simulates attached and reversed compressible boundary layer and wake flows. New viscous inviscid interaction algorithms were also developed to couple the boundary layer code with the inviscid transonic full potential program. Transonic cases with shock induced and trailing edge separation are computed and compared with experimental and Navier-Stokes results.

Vandalsem, W. R.↗

Data on noise environments at different times of day around airports

Sources of information about noise environments at different times of the day at civilian and military airports are identified. Information about movements of scheduled flights are available in machine readable form from the Official Airline Guide. Information about permanent noise monitoring sites is readily obtained from individual airports. Limited data on the timing of flights are available at centralized locations for military airports. An examination of scheduled flights at commercial airports leads to the conclusion that differences between daytime and nighttime noise levels (measured in Equivalent Continuous Noise Level, LEQ) vary from 7 to 15 decibels. Data from 128 permanent noise monitoring sites at 11 airports are also examined. Differences between daytime and nighttime noise levels at these 128 noise monitoring sites vary from 3 to 17 decibels (LEQ). Preliminary analyses suggest that accurate estimates of time-of-day weights could not be obtained from conventional social surveys at existing airports.

Fields, J. M.↗

Time dependent wave envelope finite difference analysis of sound propagation

A transient finite difference wave envelope formulation is presented for sound propagation, without steady flow. Before the finite difference equations are formulated, the governing wave equation is first transformed to a form whose solution tends not to oscillate along the propagation direction. This transformation reduces the required number of grid points by an order of magnitude. Physically, the transformed pressure represents the amplitude of the conventional sound wave. The derivation for the wave envelope transient wave equation and appropriate boundary conditions are presented as well as the difference equations and stability requirements. To illustrate the method, example solutions are presented for sound propagation in a straight hard wall duct and in a two dimensional straight soft wall duct. The numerical results are in good agreement with exact analytical results.

Baumeister, K. J.↗

Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally-homogeneous surface-roughness treatment for rotor and stator elements

A combined analytical-computational method has been developed to calculate the transient pressure field and rotordynamic coefficients for high-pressure annular seals. The solution procedure applies to constant-clearance or the convergent tapered geometries of multistage centrifugal pumps which may have different surface roughness conditions on the stator and rotor seal elements. In experimental calculations with the method, the turbulent equations of Hirs (1973) are modified slightly to account for different surface roughness conditions, and a perturbation analysis is employed to develop zeroth and first order perturbation equations. Zeroth equations are also used to define both the leakage and circumferential flow due to shear stresses around the stator and rotor surfaces. The solution to analytical equations for four different surface roughnesses confirm the predicted net damping for the seals. A round-holed stator pattern yielded the highest net damping and lowest leakage of all the seals tested.

Childs, D. W.↗

A comparison of finite-difference and finite-element methods for calculating free edge stresses in composites

It is pointed out that edge delamination is a serious failure mechanism for laminated composite materials. Various numerical methods have been utilized in attempts to calculate the interlaminar stress components which precede delamination in a laminate. There are, however, discrepancies regarding the results provided by different methods, taking into account a finite-difference procedure, a perturbation procedure, and finite element approaches. The present investigation has the objective to assess the capacity of a finite difference method to predict the character and magnitude of the interlaminar stress distributions near an interface corner. A second purpose of the investigation is to determine if predictions by finite element method in-plane, interlaminar stress components near an interface corner represent actual laminate behavior.

Bauld, N. R., Jr.↗

Finite difference analysis of torsional vibrations of pretwisted, rotating, cantilever beams with effects of warping

Theoretical natural frequencies of the first three modes of torsional vibration of pretwisted, rotating cantilever beams are determined for various thickness and aspect ratios. Conclusions concerning individual and collective effects of warping, pretwist, tension-torsion coupling and tennis racket effect (twist-rotational coupling) terms on the natural frequencies are drawn from numerical results obtained by using a finite difference procedure with first order central differences. The relative importance of structural warping, inertial warping, pretwist, tension-torsion and twist-rotational coupling terms is discussed for various rotational speeds. The accuracy of results obtained by using the finite difference approach is verified by a comparison with the exact solution for specialized simple cases of the equation of motion used in this paper.

Subrahmanyam, K. B.↗

Self-adaptive difference method for the effective solution of computationally complex problems of boundary layer theory

An implicit difference procedure for the solution of equations for a chemically reacting hypersonic boundary layer is described. Difference forms of arbitrary error order in the x and y coordinate plane were used to derive estimates for discretization error. Computational complexity and time were minimized by the use of this difference method and the iteration of the nonlinear boundary layer equations was regulated by discretization error. Velocity and temperature profiles are presented for Mach 20.14 and Mach 18.5; variables are velocity profiles, temperature profiles, mass flow factor, Stanton number, and friction drag coefficient; three figures include numeric data.

Schoenauer, W.↗

A mixed pseudospectral/finite difference method for the axisymmetric flow in a heated, rotating spherical shell

For a Spacelab flight, a model experiment of the earth's atmospheric circulation has been proposed. This experiment is known as the Atmospheric General Circulation Experiment (AGCE). In the experiment concentric spheres will rotate as a solid body, while a dielectric fluid is confined in a portion of the gap between the spheres. A zero gravity environment will be required in the context of the simulation of the gravitational body force on the atmosphere. The present study is concerned with the development of pseudospectral/finite difference (PS/FD) model and its subsequent application to physical cases relevant to the AGCE. The model is based on a hybrid scheme involving a pseudospectral latitudinal formulation, and finite difference radial and time discretization. The advantages of the use of the hybrid PS/FD method compared to a pure second-order accurate finite difference (FD) method are discussed, taking into account the higher accuracy and efficiency of the PS/FD method.

Macaraeg, M. G.↗

Growth and development of mice and rats conceived and reared at different G-intensities during chronic centrifugation

Prenatal and postnatal growth of rats conceived and reared at different G-intensities from 1.0G (earth gravity) to a maximum of 2.03G were compared. Prenatal growth was not generally impaired but the lung/body mass ratio of 22-day old fetuses at 2.03G was decreased significantly compared to 1.06 controls. Survival of neonatal rats was substantially reduced at 1.71G and 2.03G. Postnatal growth was decreased at the higher G-intensities and showed smaller or no effects at the lower G-intensities. Comparisons of organ/body mass ratios of hyper-G and 1.0G rats at 9 wks of age showed relatively few differences at the lower G-intensities. Postnatal growth of mice at 2.03G was suppressed during the neonatal period but recovered later so that after 9 wks the body mass of females reached and of males approached controls. Results of this preliminary study clearly show the influence of body mass in scaling the effects of hyper-G on the growth and development of and between different animal species.

Oyama, J.↗

Fundamental differences between optimization code test problems in engineering applications

The purpose here is to suggest that there is at least one fundamental difference between the problems used for testing optimization codes and the problems that engineers often need to solve; in particular, the level of precision that can be practically achieved in the numerical evaluation of the objective function, derivatives, and constraints. This difference affects the performance of optimization codes, as illustrated by two examples. Two classes of optimization problem were defined. Class One functions and constraints can be evaluated to a high precision that depends primarily on the word length of the computer. Class Two functions and/or constraints can only be evaluated to a moderate or a low level of precision for economic or modeling reasons, regardless of the computer word length. Optimization codes have not been adequately tested on Class Two problems. There are very few Class Two test problems in the literature, while there are literally hundreds of Class One test problems. The relative performance of two codes may be markedly different for Class One and Class Two problems. Less sophisticated direct search type codes may be less likely to be confused or to waste many function evaluations on Class Two problems. The analysis accuracy and minimization performance are related in a complex way that probably varies from code to code. On a problem where the analysis precision was varied over a range, the simple Hooke and Jeeves code was more efficient at low precision while the Powell code was more efficient at high precision.

Eason, E. D.↗