Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Cone-beam artifact evaluation of the factorization method

Purpose: The authors investigate the CB artifact behavior of the factorization approach recently suggested for image reconstruction in circular cone-beam computed tomography. This investigation is carried out in a typical C-arm geometry and involves simulated data and for the first time also phantom and clinical CB data acquired with a commercially available angiographic system. Methods: The CB artifact level is first measured using quantitative figures-of-merit that are computed from the reconstructions of the mathematical FORBILD head phantom and of a modified disk phantom. The authors then show reconstructions from a physical thorax phantom and clinical head data sets for a visual assessment of image quality. The performance of the factorization method is primarily compared to that of short-scan FDK, but the authors also show the results obtained with the full-scan FDK and the virtual PI-line BPF method for the simulation studies, as a benchmark. Results: Quantitatively, the FORBILD head phantom reconstructions of both FDK methods show a spatially averaged bias of up to 1.2% in the axial slices about 9 cm away from the plane of the scan, which is placed 4 cm below the central slice through the phantom. The artifact level for the short-scan FDK method and the virtual PI-line BPF method noticeably depends on the scan orientation. The factorization approach can significantly reduce both, this dependency as well as the reconstruction bias. It also shows visually an improved quality of the clinical images compared to short-scan FDK, particularly close to the spine and in the subcranial regions of the clinical data sets. Conclusions: The factorization approach comes with noticeably lower reconstruction bias than the FDK methods and is least sensitive to the scan orientation among all considered short-scan methods. The data inconsistencies contained in the real data sets, such as scatter, beam hardening, or data truncation, show only little impact on the factorization results. Hence, in both, reconstructions from real and simulated data, the factorization method yields better image quality than short-scan FDK, albeit at the cost of some slight, directed high-frequency artifacts that are mostly visible in axial slices.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

THE BOSS Ly{alpha} FOREST SAMPLE FROM SDSS DATA RELEASE 9

We present the BOSS Lyman-{alpha} (Ly{alpha}) Forest Sample from SDSS Data Release 9, comprising 54,468 quasar spectra with z{sub qso} > 2.15 suitable for Ly{alpha} forest analysis. This data set probes the intergalactic medium with absorption redshifts 2.0 < z{sub {alpha}} < 5.7 over an area of 3275 deg{sup 2}, and encompasses an approximate comoving volume of 20 h {sup -3} Gpc{sup 3}. With each spectrum, we have included several products designed to aid in Ly{alpha} forest analysis: improved sky masks that flag pixels where data may be unreliable, corrections for known biases in the pipeline estimated noise, masks for the cores of damped Ly{alpha} systems and corrections for their wings, and estimates of the unabsorbed continua so that the observed flux can be converted to a fractional transmission. The continua are derived using a principal component fit to the quasar spectrum redward of rest-frame Ly{alpha} ({lambda} > 1216 A), extrapolated into the forest region and normalized by a linear function to fit the expected evolution of the Ly{alpha} forest mean flux. The estimated continuum errors are {approx}< 5% rms. We also discuss possible systematics arising from uncertain spectrophotometry and artifacts in the flux calibration; global corrections for the latter are provided. Our sample provides a convenient starting point for users to analyze clustering in BOSS Ly{alpha} forest data, and it provides a fiducial data set that can be used to compare results from different analyses of baryon acoustic oscillations in the Ly{alpha} forest. The full data set is available from the SDSS-III DR9 Web site.

79 ASTRONOMY AND ASTROPHYSICS↗

SYSTEMATIC CALCULATIONS OF ENERGY LEVELS AND TRANSITION RATES OF C-LIKE IONS WITH Z = 13-36

Based on systematic calculations using a combined relativistic configuration interaction and a many-body perturbation theory (MBPT) approach, we provide a complete and consistent data set for 46 levels belonging to the 2s {sup 2}2p {sup 2}, 2s2p {sup 3}, 2p {sup 4}, 2s {sup 2}2p3s, 2s {sup 2}2p3p, and 2s {sup 2}2p3d configurations in C-like ions with 13 ≤ Z ≤ 36. The data set includes energy levels as well as electric dipole, magnetic dipole, electric quadrupole, and magnetic quadrupole transition properties. Extensive comparisons with available observed and calculated results are made and indicate that the present MBPT calculations are highly accurate. The present data set can be used reliably for many purposes, such as the line identification of observed spectra, and modeling and diagnostics of astrophysical and fusion plasmas.

79 ASTRONOMY AND ASTROPHYSICS↗

Constraining ΛCDM cosmological parameters with Einstein Telescope mock data

ABSTRACT We investigate the capability of Einstein Telescope to constrain the cosmological parameters of the non-flat ΛCDM cosmological model. Two types of mock data sets are considered depending on whether or not a short gamma-ray burst is detected, and associated with the gravitational wave emitted by binary neutron stars merger, using the THESEUS satellite. Depending on the mock data set, two statistical estimators are applied: one assumes that the redshift is known, while the other marginalizes over it assuming a specific redshift prior distribution. We demonstrate that (i) using mock catalogues collecting gravitational wave signals emitted by binary neutron stars systems to which a short gamma-ray burst has been associated, Einstein Telescope may achieve an accuracy on the cosmological parameters of $\sigma _{H_0}\approx 0.40$ km s−1 Mpc−1, $\sigma _{\Omega _{k,0}}\approx 0.09$, and $\sigma _{\Omega _{\Lambda ,0}}\approx 0.07$; while (ii) using mock catalogues collecting all gravitational wave signals emitted by binary neutron stars systems for which an electromagnetic counterpart has not been detected, Einstein Telescope may achieve an accuracy on the cosmological parameters of $\sigma _{H_0}\approx 0.04$ km s−1 Mpc−1, $\sigma _{\Omega _{k,0}}\approx 0.01$, and $\sigma _{\Omega _{\Lambda ,0}}\approx 0.01$, once the redshift probability distribution of GW events is known from from population synthesis simulations and/or the measure of the tidal deformability parameter. These results show an improvement of a factor 2–75 with respect to earlier results using complementary data sets.

Califano, Matteo↗

A Vision for Coupling Operation of US Fusion Facilities with HPC Systems and the Implications for Workflows and Data Management

The operation of large US Department of Energy (DOE) research facilities, like the DIII-D National Fusion Facility, results in the collection of complex multi-dimensional scientific datasets, both experimental and model-generated. In the future, it is envisioned that integrated data analysis coupled with large-scale high performance computing (HPC) simulations will be used to improve experimental planning and operation. Practically, massive data sets from these simulations provide the physics basis for generation of both reduced semi-analytic and machine-learning-based models. Storage of both HPC simulation datasets (generated from US DOE leadership computing facilities) and experimental datasets presents significant challenges. In this paper, we present a vision for a DOE-wide data management workflow that integrates US DOE fusion facilities with leadership computing facilities. Data persistence and long-term availability beyond the length of allocated projects is essential, particularly for verification and recalibration of artificial intelligence and machine learning (AI/ML) models. Because these data sets are often generated and shared among hundreds of users across multiple leadership computing facility centers, they would benefit from cross-platform accessibility, persistent identifiers (e.g. DOI, or digital object identifier), and provenance tracking. Here, the ability to handle different data access patterns suggests that a combination of low cost, high latency (e.g. for storing ML training sets) and high cost, low latency systems (e.g. for real-time, integrated machine control feedback) may be needed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Bringing Fenton Hill into the Digital Age: Data Conversion in Support of the Geothermal Technologies Office Code Comparison Study Challenge Problems

The Geothermal Technologies Office Code Comparison Study (GTO-CCS) was established by the U.S. Department of Energy to facilitate collaboration among members of the geothermal modeling community and to evaluate and improve upon the ability of existing codes to simulate thermal, hydrological, mechanical, and chemical processes associated with complex enhanced geothermal systems (EGS). The first stage of the project, which has been completed, involved comparing simulations for seven benchmark problems that were primarily designed using well-prescribed, simplified data sets. In the second stage, the participating teams are tackling two challenge problems based on the EGS research conducted in hot dry rock (HDR) at Fenton Hill, near Los Alamos, New Mexico. The Fenton Hill project, conducted by Los Alamos National Laboratory (LANL) from 1970 to 1995, was the world’s first HDR demonstration project. One of the criteria for selecting this experiment as the basis for the challenge problems was the amount and availability of data for generating model inputs. The Fenton Hill HDR system consisted of two reservoirs – an earlier Phase I reservoir tested from 1974 to 1981 and a deeper Phase II reservoir tested from 1980 to 1995. Detailed accounts of both phases of the HDR project have been presented in a number of books and reports, including a recently published summary of the lessons learned and a final report with a chronological description of the Fenton Hill project, prepared by LANL. Project documents and records have been archived and made public through the National Geothermal Data System (NGDS). Some of the data acquired from Phase II are available in electronic format readable on modern computers. These include the microseismic data from some of the important experiments (e.g. the massive hydraulic fracturing test conducted in 1983) and the injection/production wellhead data from the circulation tests conducted between 1992-1995. However, much of the data collected during the project, while publicly available, currently only exist in the form of tables or graphs within scanned documents. Therefore, in support of the GTO-CCS, the data needed for developing simulation inputs are being compiled and converted to platform independent, open readable formats so that all participating teams will have access to the same electronic data set. In some cases this requires conversion using optical character recognition, digitizing existing images, and generating the appropriate metadata from project documents. The GTO-Velo knowledge management framework, developed by Pacific Northwest National Laboratory (PNNL), was used for the benchmark problem stage of the comparison study and will also be used as the data repository for the challenge problem data sets. It is staggering and impractical to convert all published data for the Fenton Hill site, so the focus is on data that supports simulations for the three topical areas defined by the study for the challenge problems: 1) reservoir creation/stimulation, 2) reactive and passive transport, and 3) thermal recovery. Conversion of these data provide value not only to GTO-CCS participants, but also to members of the geothermal community at large who may be interested in revisiting the Fenton Hill experiment in the future.

Code Comparison Study↗

Two-pion contribution to hadronic vacuum polarization

We present a detailed analysis of e + e - → π + π - data up to \( \sqrt{s}=1 \) GeV in the framework of dispersion relations. Starting from a family of ππ P -wave phase shifts, as derived from a previous Roy-equation analysis of ππ scattering, we write down an extended Omnès representation of the pion vector form factor in terms of a few free parameters and study to which extent the modern high-statistics data sets can be described by the resulting fit function that follows from general principles of QCD. We find that statistically acceptable fits do become possible as soon as potential uncertainties in the energy calibration are taken into account, providing a strong cross check on the internal consistency of the data sets, but preferring a mass of the ω meson significantly lower than the current PDG average. In addition to a complete treatment of statistical and systematic errors propagated from the data, we perform a comprehensive analysis of the systematic errors in the dispersive representation and derive the consequences for the two-pion contribution to hadronic vacuum polarization. In a global fit to both time- and space-like data sets we find a ππ μ | ≤ 1 GeV = 495.0(1.5)(2.1) × 10 -10 and a ππ μ | ≤ 0.63 GeV = 132.8(0.4)(1.0) × 10 -10 . While the constraints are thus most stringent for low energies, we obtain uncertainty estimates throughout the whole energy range that should prove valuable in corroborating the corresponding contribution to the anomalous magnetic moment of the muon. As side products, we obtain improved constraints on the ππ P -wave, valuable input for future global analyses of low-energy ππ scattering, as well as a determination of the pion charge radius, $\langle$$r^{2}_{π}$$\rangle$ = 0 . 429(1)(4) fm 2 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enabling modern data discovery for atmospheric measurements

The Atmospheric Radiation Measurement (ARM) user facility is a US Department of Energy Office of Science user facility that is managed and operated through a collaborative effort led by nine US Department of Energy national laboratories. The ARM Data Center, located at Oak Ridge National Laboratory, is responsible for the timely collection, processing, and delivery of data products to the scientific community. The ARM Data Center holds more than 11,000 data products, including metadata collected from field campaigns, instruments, value-added products, and principal investigator–contributed data. These data sets are checked for successful transfer (for most data, this transfer is carried out automatically via the network; however, some of the largest data sets and some of the most remote sites require manual shipping of hard disks) and both the data and metadata are processed to a standard format, which is an ARM-standardized structure, via the Network Common Data Form. The Network Common Data Form is a self-describing binary format with many compatible software tools. Once processed, the data are cataloged, stored in the ARM Data Archive, and made discoverable through association with an array of metadata-characterizing information, such as location and measurement classification. These metadata enable powerful search capabilities through the ARM Data Center Data Discovery interface. This paper discusses the workflow of how the new discovery system has been redesigned from user requirements and how the data are distributed to the scientific community.

54 ENVIRONMENTAL SCIENCES↗

Decomprolute is a benchmarking platform designed for multiomics-based tumor deconvolution

Tumor deconvolution is a reliable way to disentangle the diverse cell types that comprise solid tumors. To date, however, both the algorithms developed to deconvolve tumor samples, and the gold standard datasets used to assess the algorithms are geared toward the analysis of gene expression (e.g., RNA-seq) rather than protein levels in tumor cells. While gene expression is less expensive to measure, protein levels provide a more accurate view of immune markers. To facilitate the development as well as improve the reproducibility and reusability of multi-omic deconvolution algorithms, we introduce Decomprolute, a Common Workflow Language framework that leverages containerization to compare tumor deconvolution algorithms across multiomic data sets. Decomprolute incorporates the large-scale multiomic data sets produced by the Clinical Proteomic Tumor Analysis Consortium (CPTAC), which include matched mRNA expression and proteomic data from thousands of tumors across multiple cancer types to build a fully open-source, containerized proteogenomic tumor deconvolution benchmarking platform. The platform consists of modular architecture and it comes with well-defined input and output formats at each module. As a result, it is robust and extendable easily with additional algorithms or analyses. The platform is available for access and use at http://pnnl-compbio.github.io/decomprolute.

60 APPLIED LIFE SCIENCES↗

Uncertainty and Sensitivity Analyses of a Pebble Bed HTGR Loss of Cooling Event

The Very High Temperature Reactor Methods Development group at the Idaho National Laboratory identified the need for a defensible and systematic uncertainty and sensitivity approach in 2009. This paper summarizes the results of an uncertainty and sensitivity quantification investigation performed with the SUSA code, utilizing the International Atomic Energy Agency CRP 5 Pebble Bed Modular Reactor benchmark and the INL code suite PEBBED-THERMIX. Eight model input parameters were selected for inclusion in this study, and after the input parameters variations and probability density functions were specified, a total of 800 steady state and depressurized loss of forced cooling (DLOFC) transient PEBBED-THERMIX calculations were performed. The six data sets were statistically analyzed to determine the 5% and 95% DLOFC peak fuel temperature tolerance intervals with 95% confidence levels. It was found that the uncertainties in the decay heat and graphite thermal conductivities were the most significant contributors to the propagated DLOFC peak fuel temperature uncertainty. No significant differences were observed between the results of Simple Random Sampling (SRS) or Latin Hypercube Sampling (LHS) data sets, and use of uniform or normal input parameter distributions also did not lead to any significant differences between these data sets.

Strydom, Gerhard↗

Survey of Magnetosheath Plasma Properties at Saturn and Inference of Upstream Flow Conditions

A new Cassini magnetosheath data set is introduced that is based on a comprehensive survey of intervals in which the observed magnetosheath flow was encompassed within the plasma analyzer field of view and for which the computed numerical moments are therefore expected to be accurate. The data extend from 2004 day 299 to 2012 day 151 and comprise 19,155 416-s measurements. In addition to the plasma ion moments (density, temperature, and flow velocity), merged values of the plasma electron density and temperature, the energetic particle pressure, and the magnetic field vector are included in the data set. Statistical properties of various magnetosheath parameters, including dependence on local time, are presented. The magnetosheath field and flow are found to be only weakly aligned, primarily because of a relatively large z-component of the magnetic field, attributable to the field being pulled out of the equatorial orientation by flows at higher latitudes. A new procedure for using magnetosheath properties to estimate the upstream solar wind speed is proposed and used to determine that the amount of electron heating at Saturn's high Mach-number bow shock is ~4% of the dissipated flow energy. The data set is available as an electronic supplement to this paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessing High-Throughput Descriptors for Prediction of Transparent Conductors

The growth of materials databases has offered significant quantities of data to mine for new energy materials using high-throughput screening methodologies. One application of interest to energy and optoelectronics is the prediction of new high performing p-type transparent conductors (TCs). Yet, screening methods for such materials have never been validated over the breadth of computed materials properties. In this study, we compile an experimental data set of 74 bulk crystal structures corresponding to known state-of-the-art n-type and p-type TCs and compute a series of corresponding computational descriptor properties. Our goals are to (1) compare computational descriptors to experimentally demonstrated properties of real materials in the data set, (2) determine the ability of ground state, density functional theory (DFT)-based computational screening methodologies to identify these experimentally realized TCs, and (3) use this understanding to estimate reasonable screening cutoffs for four commonly used descriptors. First, stability calculations demonstrate that most materials in the data set have an energy above the convex hull ( E hull ) of <100 meV/atom, and we also propose a Pourbaix analysis technique to estimate moisture stability. Second, we find a lenient cutoff for the DFT PBE band gap of 0.5 eV is sufficient to include a majority of the wide gap candidates and exclude narrow gap compounds. Next, the effective mass, m *, is found to correlate weakly to conductivity in the p-type materials as compared with n-type materials, which may motivate an increase in the m * cutoff as well. Lastly, we perform an uncertainty analysis and literature comparison for the branch point energy (BPE), a qualitative descriptor for dopability. We discover the BPEs of most n-type materials to lie near the conduction band and those of most p-type materials to lie at midgap; this is a significant distinction, implying BPE to be a more definitive descriptor for n-type TC materials. By assessing the validity of this simple screening methodology via comparing experimental data to computational descriptors, we aim to motivate and strengthen future materials discovery efforts in the field of transparent conductors and beyond.

36 MATERIALS SCIENCE↗

Assessing Mountains as Natural Reservoirs With a Multimetric Framework

Anthropogenic climate change will continue to diminish the unique role that mountains perform as natural reservoirs and alter long‐held assumptions of water management. Climate models are important tools to help constrain uncertainty and understand processes that shape this decline. To ensure that climate model estimates provide stakeholder relevant information, the formulation of multimetric model evaluation frameworks informed by stakeholder interactions are critical. In this study, we present one such multimetric framework to evaluate snowpack data sets in the California Sierra Nevada: the snow water equivalent (SWE) triangle. SWE triangle metrics help to describe snowpack characteristics associated with total water volume buildup, peak water availability, and the rate of water release. This approach highlights compensating errors that would not be reflected in conventional large‐scale spatiotemporal analysis. To test our multimetric evaluation framework, we evaluate several publicly available snow products including the Sierra Nevada Snow Reanalysis, Livneh (L15), and the North American Land Data Assimilation System version 2 data sets. We then evaluate regional climate model skill within the North American Coordinated Regional Climate Downscaling Experiment. All data sets analyzed show variation across the various SWE triangle metrics, even within observationally constrained snow products. This spread was especially shown in spring season melt rates. Melt rate biases were prevalent throughout most regional climate model simulations, regardless of snow accumulation dynamics, and will need to be addressed to improve their utility for water stakeholders.

54 ENVIRONMENTAL SCIENCES↗

Network Anomaly Detection Using Federated Learning

The internet is turning out to be an integral part of every-one's lives as more and more devices are being connected to serve societal needs. Our work is motivated by two ma-jor observations. Firstly, one drawback of connecting to the network is the threat of network attacks that can compromise users' private information, leading to data loss and adversely affecting productivity. There are several traditional security mechanisms to defend against these attacks, such as firewalls, virtual private networks (VPNs), demilitarized zones (DMZs), and vulnerability scanners. One way to prevent these attacks is early detection and prevention. However, these kinds of architecture do not scale very well because of their centralized nature. Secondly, we observe from heuristics and data set distributions that the majority of the requests made to a server are innocuous. Therefore, almost all server request data sets are highly imbalanced, weighted highly towards the harmless requests.

Marfo, William↗

Aho-Corasick String Matching on Shared and Distributed Memory Parallel Architectures

String matching is at the core of many critical applications, including network intrusion detection systems, search engines, virus scanners, spam filters, DNA and protein sequencing, and data mining. For all of these applications string matching requires a combination of (sometimes all) the following characteristics: high and/or predictable performance, support for large data sets and flexibility of integration and customization. Many software based implementations targeting conventional cache-based microprocessors fail to achieve high and predictable performance requirements, while Field-Programmable Gate Array (FPGA) implementations and dedicated hardware solutions fail to support large data sets (dictionary sizes) and are difficult to integrate and customize. The advent of multicore, multithreaded, and GPU-based systems is opening the possibility for software based solutions to reach very high performance at a sustained rate. This paper compares several software-based implementations of the Aho-Corasick string searching algorithm for high performance systems. We discuss the implementation of the algorithm on several types of shared-memory high-performance architectures (Niagara 2, large x86 SMPs and Cray XMT), distributed memory with homogeneous processing elements (InfiniBand cluster of x86 multicores) and heterogeneous processing elements (InfiniBand cluster of x86 multicores with NVIDIA Tesla C10 GPUs). We describe in detail how each solution achieves the objectives of supporting large dictionaries, sustaining high performance, and enabling customization and flexibility using various data sets.

99 GENERAL AND MISCELLANEOUS↗

Investigating the Magnetic Imprints of Major Solar Eruptions with SDO /HMI High-cadence Vector Magnetograms

The solar active region photospheric magnetic field evolves rapidly during major eruptive events, suggesting appreciable feedback from the corona. Previous studies of these “magnetic imprints” are mostly based on line of sight only or lower-cadence vector observations; a temporally resolved depiction of the vector field evolution is hitherto lacking. Here, we introduce the high-cadence (90 s or 135 s) vector magnetogram data set from the Helioseismic and Magnetic Imager, which is well suited for investigating the phenomenon. These observations allow quantitative characterization of the permanent, step-like changes that are most pronounced in the horizontal field component (B {sub h}). A highly structured pattern emerges from analysis of an archetypical event, SOL2011-02-15T01:56, where B {sub h} near the main polarity inversion line increases significantly during the earlier phase of the associated flare with a timescale of several minutes, while B {sub h} in the periphery decreases at later times with smaller magnitudes and a slightly longer timescale. The data set also allows effective identification of the “magnetic transient” artifact, where enhanced flare emission alters the Stokes profiles and the inferred magnetic field becomes unreliable. Our results provide insights on the momentum processes in solar eruptions. The data set may also be useful to the study of sunquakes and data-driven modeling of the corona.

79 ASTRONOMY AND ASTROPHYSICS↗

Arctic Black Carbon Loading and Profile Using the Single-Particle Soot Photometer (SP2) Field Campaign Report

One of the major issues confronting aerosol climate simulations of the Arctic and Antarctic cryospheres is the lack of detailed data on the vertical and spatial distribution of aerosols with which to test these models. This is due, in part, to the inherent difficulty of conducting such measurements in extreme environments. However given the pronounced sensitivity of the polar regions to radiative balance perturbations, it is incumbent upon our community to better understand and quantify these perturbations, and their unique feedbacks, so that robust model predictions of this region can be realized. One class of under-measured radiative forcing agents in the polar region is the absorbing aerosol—black carbon and brown carbon. Black carbon (BC; also referred to as light-absorbing carbon [LAC], refractory black carbon [rBC], and soot) is second only to CO2 as a positive forcing agent. Roughly 60% of BC emissions can be attributed to anthropogenic sources (fossil fuel combustion and open-pit cooking), with the remaining fraction being due to biomass burning. Brown carbon (BrC), a major component of biomass burning, collectively refers to non-BC carbonaceous aerosols that typically possess minimal light absorption at visible wavelengths but exhibit pronounced light absorption in the near-ultraviolet (UV) spectrum. Both species can be sourced locally or be remotely transported to the Arctic region and are expected to perturb the radiative balance. The work conducted in this field campaign addresses one of the more glaring deficiencies currently limiting improved quantification of the impact of BC radiative forcing in the cryosphere: the paucity of data on the vertical and spatial distributions of BC. By expanding the Gulfstream aircraft (G-1) payload for the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility-sponsored ACME-V campaign to include the Single-Particle Soot Photometer (SP2)) and leveraging the ACME-V campaign’s deployment within the Arctic Circle during the summer of 2015 (Deadhorse, Alaska [70° 12' 20" N, 148° 30' 42" W]), the truly unique opportunity presented itself to acquire profile data on BC loading at little additional cost. Since the SP2 is a particle-resolved measurement, the resulting data set provides refractory black carbon (rBC) mass loadings, size and mass distributions, and rBC-containing particle mixing state, all of which are expected to readily find value in the modeling community. As part of the ACME-V (http://www.arm.gov/campaigns/aaf2014armacmev) campaign, CO, CO2, and CH4 were also measured, providing the unique opportunity for carbon closure. We will also work closely with modelers who require such data and expect this collaboration will lead directly to a better understanding of the climate impacts of BC in the Arctic. The primary measurement objective was to acquire airborne data on the vertical and spatial distributions of refractory black carbon (rBC) loading, size and mass distribution, and particle mixing state. The primary scientific objective was to provide a targeted data set of rBC particle distributions to better understand and constrain the impact of black carbon radiative forcing in the cryosphere. The SP2-based data set during this campaign is available in the DOE-ARM archive (http://www.arm.gov/campaigns/aaf2015abclp).

54 ENVIRONMENTAL SCIENCES↗

Efficient 3-D velocity model building using joint inline and crossline plane-wave wave-equation migration velocity analyses

SUMMARY Wave-equation migration velocity analysis (WEMVA) is an image-domain inversion method for velocity model building. Automatic plane-wave WEMVA (PWEMVA) calculates the moveouts of plane-wave common-image gathers (CIGs) by searching a best-fitting parabola with semblance analysis and backprojects residual CIG moveouts into wavefield wave paths with a reflection tomographic kernel. However, 3-D PWEMVA is very computationally expensive because 3-D reflection tomographic inversion requires at least five 3-D reverse-time migrations per iteration and stores two types of source wavefields at model boundaries. We develop a joint inline and crossline PWEMVA method for efficient 3-D velocity model building. We alternatively implement the inline and crossline PWEMVAs with a constraint for each other, in which we iteratively construct the 3-D velocity model update through 1-D spline interpolation of 2-D gradients. The inline and crossline joint inversion is practical since PWEMVA only inverts for low-wavenumber velocity perturbations along wave paths, and the method can take less than 1 per cent of the computational cost of full 3-D PWEMVA. To construct unaliased plane waves for our joint inline and crossline PWEMVA, we develop a 3-D data interpolation method in the frequency–wavenumber (FK) domain to recover regularly and randomly missing traces. The method minimizes the misfit on sufficiently localized data subsets with iterative optimal step lengths and a gradient preconditioner that iteratively selects dominant dips along different azimuths. In numerical experiments, we use a 3-D synthetic seismic data set and a land 3-D field seismic data set acquired at the Farnsworth CO2-EOR (enhanced oil recovery) field to demonstrate the efficacy of our velocity model building and data interpolation methods.

Liu, Xuejian↗