Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data inventory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Activation estimates of the RHIC beam dump

In anticipation of the expiration of the RHIC ASE in December 2025 and the need to demonstrate compliance with nuclear facility rule (10CFR830), this study quantifies the radionuclide inventory and respective activity at the beam dumps by simulating a period of five years of operation using conservative assumptions. Simulations were performed with the Monte Carlo particle transport and interaction code FLUKA and its dosimetry results were compared with measured dose rate data, showing good agreement. The beam dump was deemed to constitute the main hotspot of residual radiation and also representative of a worst case scenario in terms of induced activation. The activation levels calculated indicate that the RHIC tunnel will be well below the thresholds of a DOE’s category-3 nuclear facility classification.

43 PARTICLE ACCELERATORS↗

Manned space flight nuclear system safety. Volume 3: Reactor system preliminary nuclear safety analysis. Part 2: Accident Model Document (AMD)

The Accident Model Document is one of three documents of the Preliminary Safety Analysis Report (PSAR) - Reactor System as applied to a Space Base Program. Potential terrestrial nuclear hazards involving the zirconium hydride reactor-Brayton power module are identified for all phases of the Space Base program. The accidents/events that give rise to the hazards are defined and abort sequence trees are developed to determine the sequence of events leading to the hazard and the associated probabilities of occurence. Source terms are calculated to determine the magnitude of the hazards. The above data is used in the mission accident analysis to determine the most probable and significant accidents/events in each mission phase. The only significant hazards during the prelaunch and launch ascent phases of the mission are those which arise form criticality accidents. Fission product inventories during this time period were found to be very low due to very limited low power acceptance testing.

Source record↗

LACIE ADP/PI joint case study: ADP analysis guidelines

The procedure is described which was used to train automatic data processing (ADP) analysts to process ERTS 1 imagery from a 5 nm by 6 nm area in Delisle, Canada, and to estimate wheat acreage using training fields provided by photointerpreters. The exercise also served to evaluate and test current large area crop inventory experiment (LACIE) procedures.

Minter, T. C.↗

The Large Area Crop Inventory Experiment /LACIE/ - A summary of three years' experience

Aims, history and schedule of the Large Area Crop Inventory Experiment (LACIE) conducted by NASA, USDA and NOAA from 1974-1977 are described. The LACIE experiment designed to research, develop, apply and evaluate a technology to monitor wheat production in important regions throughout the world (U.S., Canada, USSR, Brasil) utilized quantitative multispectral data collected by Landsat in concert with current weather data and historical information. The experiment successfully exploited computer data and mathematical models to extract timely corp information. A follow-on activities for the early 1980's is planned focusing especially on the early warning of changes affecting production and quality of renewable resources and commodity production forecast.

Erb, R. B.↗

The 1981 Argentina ground data collection

Over 600 fields in the corn, soybean and wheat growing regions of the Argentine pampa were categorized by crop or cover type and ancillary data including crop calendars, historical crop production statistics and certain cropping practices were also gathered. A summary of the field work undertaken is included along with a country overview, a chronology of field trip planning and field work events, and the field work inventory of selected sample segments. LANDSAT images were annotated and used as the field work base and several hundred ground and aerial photographs were taken. These items along with segment descriptions are presented. Meetings were held with officials of the State Secretariat of Agriculture (SEAG) and the National Commission on Space Investigations (CNIE), and their support to the program are described.

Horvath, R.↗

NASA's Eastern Regional Remote Sensing Applications Program

The goals of the Eastern Regional Remote Sensing Applications Program are to establish capability for using LANDSAT technology in state institutions and organizations in an operational mode, and to assist in handling new data, introducing new techniques as they become available, and in building and nurturing the technology within the states. Techniques for application development are supported and workshops and demonstrations are provided to pass information on to users. Major areas of project interest are forest inventory, water inventory, and water clarity, and land cover change detection. Another activity is in adopting software, modifying it to work on users' computers, and in identifying hardware that can be used and tied to user computer systems. Involvement of universities as resources for state and local governments is another element of the program.

Cressy, P. J., Jr.↗

Infrared Imaging of Boundary Layer Transition Flight Experiments

The Hypersonic Thermodynamic Infrared Measurement (HYTHIRM) project is presently focused on near term support to the Shuttle program through the development of an infrared imaging capability of sufficient spatial and temporal resolution to augment existing on-board Orbiter instrumentation. Significant progress has been made with the identification and inventory of relevant existing optical imaging assets and the development, maturation, and validation of simulation and modeling tools for assessment and mission planning purposes, which were intended to lead to the best strategies and assets for successful acquisition of quantitative global surface temperature data on the Shuttle during entry. However, there are longer-term goals of providing global infrared imaging support to other flight projects as well. A status of HYTHIRM from the perspective of how two NASA-sponsored boundary layer transition flight experiments could benefit by infrared measurements is provided. Those two flight projects are the Hypersonic Boundary layer Transition (HyBoLT) flight experiment and the Shuttle Boundary Layer Transition Flight Experiment (BLT FE), which are both intended for reducing uncertainties associated with the extrapolation of wind tunnel derived transition correlations for flight application. Thus, the criticality of obtaining high quality flight data along with the impact it would provide to the Shuttle program damage assessment process are discussed. Two recent wind tunnel efforts that were intended as risk mitigation in terms of quantifying the transition process and resulting turbulent wedge locations are briefly reviewed. Progress is being made towards finalizing an imaging strategy in support of the Shuttle BLT FE, however there are no plans currently to image HyBoLT.

Berry, Scott A.↗

Crosscutting Airborne Remote Sensing Technologies for Oil and Gas and Earth Science Applications

Airborne imaging spectroscopy has evolved dramatically since the 1980s as a robust remote sensing technique used to generate 2-dimensional maps of surface properties over large spatial areas. Traditional applications for passive airborne imaging spectroscopy include interrogation of surface composition, such as mapping of vegetation diversity and surface geological composition. Two recent applications are particularly relevant to the needs of both the oil and gas as well as government sectors: quantification of surficial hydrocarbon thickness in aquatic environments and mapping atmospheric greenhouse gas components. These techniques provide valuable capabilities for petroleum seepage in addition to detection and quantification of fugitive emissions. New empirical data that provides insight into the source strength of anthropogenic methane will be reviewed, with particular emphasis on the evolving constraints enabled by new methane remote sensing techniques. Contemporary studies attribute high-strength point sources as significantly contributing to the national methane inventory and underscore the need for high performance remote sensing technologies that provide quantitative leak detection. Imaging sensors that map spatial distributions of methane anomalies provide effective techniques to detect, localize, and quantify fugitive leaks. Airborne remote sensing instruments provide the unique combination of high spatial resolution (<1 m) and large coverage required to directly attribute methane emissions to individual emission sources. This capability cannot currently be achieved using spaceborne sensors. In this study, results from recent NASA remote sensing field experiments focused on point-source leak detection, will be highlighted. This includes existing quantitative capabilities for oil and methane using state-of-the-art airborne remote sensing instruments. While these capabilities are of interest to NASA for assessment of environmental impact and global climate change, industry similarly seeks to detect and localize leaks of both oil and methane across operating fields. In some cases, higher sensitivities desired for upstream and downstream applications can only be provided by new airborne remote sensing instruments tailored specifically for a given application. There exists a unique opportunity for alignment of efforts between commercial and government sectors to advance the next generation of instruments to provide more sensitive leak detection capabilities, including those for quantitative source strength determination.

hyperspectral↗

Constraining Hesperian martian PCO2 from mineral analysis at Gale crater

Carbon dioxide is an essential atmospheric component in martian climate models that attempt to reconcile a faint young sun with planet-wide evidence of liquid water at the planets surface in the Noachian and Early Hesperian. Current estimates of ancient martian CO2 levels, derived from global inventories of carbon, and orbital detections of Noachian and Early Hesperian clay mineral-bearing terrains indicate CO2 levels that are unable to support warm and wet conditions. These estimates are subject to various sources of uncertainty however. Mineral and contextual sedimentary environmental data collected by the Mars Science Laboratory rover Curiosity in Gale Crater provide a more direct means of estimating the atmospheric partial pressure of CO2 (PCO2) coinciding with a long-lived lake system in Gale crater at ~3.5 Ga. Results from a reaction-transport model, which simulates mineralogy observed within the Sheepbed member at Yellowknife Bay by coupling mineral equilibria with carbonate precipitation kinetics and rates of sedimentation, indicate atmospheric PCO2 levels in the 10’s mbar range. At such low PCO2 levels, climate models are unable to warm Hesperian Mars anywhere near the freezing point of water and other gases are required to raise atmospheric pressure to prevent lakes from boiling away. Thus, lacustrine features of Gale formed in a cold environment by a mechanism yet to be determined, or the climate models still lack an essential component that would serve to elevate surface temperatures, at least temporally and/or locally, on Hesperian Mars. Our results also impose restrictions on the potential role of atmospheric CO2 in inferred warmer conditions of the Noachian.

Bristow, T. F.↗

New Global Characterization of Landslide Exposure

Landslides triggered by intense rainfall are hazards that impact people and infrastructure across the world, but comprehensively quantifying exposure to these hazards remains challenging. Unlike earthquakes or flooding which cover large areas, landslides occur only in highly susceptible parts of a landscape affected by intense rainfall, which may not intersect human settlement or infrastructure. Existing datasets of landslides around the world generally include only those reported to have caused impacts, leading to significant biases toward areas with higher reporting capacity, limiting how our understanding of exposure to landslides in developing countries. In this study, we use an alternative approach to estimate exposure to landslides in a homogenous fashion. We have combined a global landslide hazard proxy derived from satellite data with open-source datasets on population, roads and infrastructure to consistently estimate exposure to rapid landslide hazards around the globe. These exposure models compare favorably with existing datasets of rainfall-triggered landslide fatalities, while filling in major gaps in inventory-based estimates in parts of the world with lower reporting capacity. Our findings provide a global estimate of exposure to landslides from 2001-2019 that we suggest may be useful to disaster mitigation professionals.

earthquakes↗

Large Area Crop Inventory Experiment (LACIE). Phase 3 direct wheat study of North Dakota

The author has identified the following significant results. The green number and brightness scatter plots, channel plots of radiance values, and visual study of the imagery indicate separability between barley and spring wheat/oats during the wheat mid-heading to mid-ripe stages. In the LACIE Phase 3 North Dakota data set, the separation time is more specifically the wheat soft dough stage. At this time, the barley is ripening, and is therefore, less green and brighter than the wheat. Only 4 of the 18 segments studied indicate separation of barley/other spring small grain, even though 11 of the segments have acquisitions covering the wheat soft dough stage. The remaining seven segments had less than 5 percent barley based on ground truth data.

Kinsler, M. C.↗

Automated thematic mapping and change detection of ERTS-1 images

A system that inventories and updates resources must be capable of recognizing resources and their changes rapidly, using imagery acquired by a resources satellite such as ERTS-1. The conversion of ERTS images to thematic maps showing the distribution of resources is the first step in the data reduction process. To accomplish this task, the resources must be recognized from spatial and multispectral signatures. In addition, resource boundaries must be accurately established, and the data from different acquisition dates must be registered. This paper describes a system that combines multispectral and spatial pattern recognition techniques to produce thematic maps. This system has been applied to ERTS-1 MSS images, and the results obtained are discussed.

Gramenopoulos, N.↗

Remote sensing of ice and snow - Review and status

The interpretation of satellite data is reviewed to address the possibility of extracting geophysically useful data regarding ice and snow. The scientific and practical utility of such data is examined in terms of the required and available scales, resolutions, and data types. Satellite instrumentation for ice and snow studies includes the AVHRR, the Special Sensor Microwave Imager, and the altimeters on Geosat and the European Remote Sensing Satellite. The satellites are presently used for conducting investigations of the microwave radiometry of snow, shortwave snowcover inventories, and sensor and model validations. It is noted that these studies encompass a range of ice properties and employ approaches and scientists from a number of fields. Areas that remain to be addressed in the field include snow structure and substrate effects, fall cooling, floe flooding, and brine expulsion.

Carsey, Frank↗

Mars atmospheric escape and isotopic fractionation: Synthesis of data and models

The present Mars atmosphere is relatively thin and cold. It is not at all like that which is presumed to have been responsible for the formation of valley networks and the heavy erosion of craters during the earliest epochs of martian history. An important goal of Mars exploration is to try to understand the properties of the early atmosphere, the initial inventory of volatiles at the planet's surface, the processes by which the atmosphere and climate have evolved over time, and the current location of volatiles presumed to have been in the atmosphere in the earlier times. The current status of understanding of the escape of volatiles to space over geologic time and the resulting fractionation of isotopes of stable atoms remaining in the atmosphere are described, and a scenario for volatile abundance and evolution that is consistent with the available information on the escape and fractionation of each species is constructed. In particular, the evolution of hydrogen, carbon, oxygen, and nitrogen, as contained in atmospheric (and non-atmospheric) water, carbon dioxide, and molecular nitrogen, is examined.

Jakosky, Bruce M.↗

Remote sensing techniques for support of coastal zone resource management.

Description of remote sensing studies carried out for the purpose of developing and/or demonstrating techniques which can be employed for land use inventory, marsh vegetation classification, and water characteristics surveys. Attention is given to results obtained with (1) photo interpretation techniques and procedures for the development of land use information from high-altitude aircraft and satellite imagery, (2) computer based pattern recognition techniques utilizing multispectral scanner data for marsh vegetation classification, and (3) infrared and microwave techniques for the monitoring and surveying of coastal water temperature and salinity characteristics.

Piland, R. O.↗

Environmental impact analysis with the airspace concept evaluation system

The National Aeronautics and Space Administration (NASA) Ames Research Center has developed the Airspace Concept Evaluation System (ACES), which is a fast-time simulation tool for evaluating Air Traffic Management (ATM) systems. This paper describes linking a capability to ACES which can analyze the environmental impact of proposed future ATM systems. This provides the ability to quickly evaluate metrics associated with environmental impacts of aviation for inclusion in multi-dimensional cost-benefit analysis of concepts for evolution of the National Airspace System (NAS) over the next several decades. The methodology used here may be summarized as follows: 1) Standard Federal Aviation Administration (FAA) noise and emissions-inventory models, the Noise Impact Routing System (NIRS) and the Emissions and Dispersion Modeling System (EDMS), respectively, are linked to ACES simulation outputs; 2) appropriate modifications are made to ACES outputs to incorporate all information needed by the environmental models (e.g., specific airframe and engine data); 3) noise and emissions calculations are performed for all traffic and airports in the study area for each of several scenarios, as simulated by ACES; and 4) impacts of future scenarios are compared to the current NAS baseline scenario. This paper also provides the results of initial end-to-end, proof-of-concept runs of the integrated ACES and environmental-modeling capability. These preliminary results demonstrate that if no growth is likely to be impeded by significant environmental impacts that could negatively affect communities throughout the nation.

Augustine, Stephen↗

Robonaut 2 - Preparing for Intra-Vehicular Mobility on the International Space Station

Robonaut 2 (R2) has been undergoing experimental trials on board the International Space Station (ISS) for more than a year. This upper-body anthropomorphic robotic system shown in Figure 1 has been making steady progress after completing its initial checkout. R2 demonstrated free space motion, physically interacted with its human crew mates, manipulated interfaces on its task board and has even used its first tool. This steady growth in capability will lead R2 to its next watershed milestone. Developers are currently testing prototype robotic climbing appendages and a battery backpack in preparation of sending flight versions of both subsystems to the ISS in late 2013. Upon integration of its new components, R2 will be able to go mobile inside the space station with a twofold agenda. First, R2 will learn to maneuver in microgravity in the best possible laboratory for such a task. Second, it will start providing early payback to the ISS program by helping with intra-vehicular (IVA) maintenance tasks. The experience gained inside the ISS will be invaluable in reducing risk when R2 moves to its next stage and is deployed as an extra-vehicular (EVA) tool. Even on its current fixed base stanchion, R2 has already shown its capability of performing several maintenance tasks on the ISS. It has measured the air flow through one of the stations vents and provided previously unavailable real time flow data to ground operators. R2 has cleaned its first handrail, exciting some crew members that perhaps Saturday morning housekeeping on the station may someday become a task they can hand off to their robotic colleague. Other tasks, including using radio frequency identification (RFID) tools for inventory tasks or vacuuming air filters, have also been suggested and will be explored. Once mobile, R2 will take on these tasks and more to free up crew time for more important science and exploration pursuits. In addition to task exploration, research and testing is happening on orbit to prepare for R2 mobility operations. The current vision system in R2 s head is being used to identify and localize IVA handrails throughout the US Lab and ground control software is being updated and integrated in advance of supporting mobility operations.

Badger, Julia↗

Systems Development, Data Mining, and Knowledge Discovery

The primary role of the Technical Integration Office is to provide technical solutions and services to different branches at KSC (Kennedy Space Center) and NASA program customers. The Technical Integration Office helps support KSC's operational needs by providing services such as digital connectivity, data center services, modelling and simulation tools, and communication video services. To learn the necessary technology and processes for my internship, I am working on two projects: learning C# (C Sharp programming language) with SQL and developing requirements for a PX (Communication and Public Engagement) inventory management system. To learn how to efficiently program with C#, my mentor assigned me to complete a sports informatics application that would let users discover facts and rules about various sports. The sports informatics application comes with search capabilities, report generating features, rule lists that users can modify, and diagrams for various sport strategies. To further build upon this project, I also developed a sport simulation game with the application. Once I begin more SQL-based projects, I will have the opportunity to learn how to manage databases and link SQL servers with C# programs. To develop requirements for the inventory management system, I have met with PX representatives and toured their storage facilities to see how they organize and store their items and equipment. I will also be meeting with representatives from the budget office to find out what information must be in a system budget report. The main components the system must have are customer request management, a search feature for items and equipment, report generation capabilities, and automated system warnings when item quantities reach or go below administrator-specified threshold levels. I have drafted questions and shall statements that will ultimately become part of the inventory management system requirements document.

Espinosa, Gabriel↗