Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “confining”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Strongly Confined Bismuth Antimonide Quantum Dots

Bismuth antimonide (Bi 1−x Sb x ) has emerged as a highly promising material for quantum applications due to its complex band structure. In this study, spherical Bi 1−x Sb x quantum dots (QDs), with a diameter of around 8 ± 2 nm, were successfully synthesized by pulsed laser ablation in liquids. The energy bandgap was determined at 2.02 ± 0.27 eV, which is significantly higher than the bulk value (∼0.025 eV). The strong confinement nature of the dots was confirmed by the Raman peak shifts. The chemical composition of the Bi 1−x Sb x QDs was measured to be around 77 ± 2 at. % of Bi and 23 ± 2 at. % of Sb. The colloid containing the Bi 1−x Sb x QDs was classified as highly stable, displaying a zeta potential of −38 ± 18 mV. Finally, the Bi 1−x Sb x QDs exhibited an electron spin resonance (ESR) signal at room temperature and at cryogenic temperature (4.2 K); consequently, revealing the presence of paramagnetic states.

Alloys↗

Control of monodomain polymer-stabilized cuboidal nanocrystals of chiral nematics by confinement.

Liquid crystals are important components of optical technologies. Cuboidal crystals consisting of chiral liquid crystals-the so-called blue phases (BPs), are of particular interest due to their crystalline structures and fast response times, but it is critical that control be gained over their phase behavior as well as the underlying dislocations and grain boundaries that arise in such systems. Blue phases exhibit cubic crystalline symmetries with lattice parameters in the 100 nm range and a network of disclination lines that can be polymerized to widen the range of temperatures over which they occur. Here, we introduce the concept of strain-controlled polymerization of BPs under confinement, which enables formation of strain-correlated stabilized morphologies that, under some circumstances, can adopt perfect single-crystal monodomain structures and undergo reversible crystal-to-crystal transformations, even if their disclination lines are polymerized. We have used super-resolution laser confocal microscopy to reveal the periodic structure and the lattice planes of the strain and polymerization stabilized BPs in 3D real space. Our experimental observations are supported and interpreted by relying on theory and computational simulations in terms of a free energy functional for a tensorial order parameter. Simulations are used to determine the orientation of the lattice planes unambiguously. The findings presented here offer opportunities for engineering optical devices based on single-crystal, polymer-stabilized BPs whose inherent liquid nature, fast dynamics, and long-range crystalline order can be fully exploited.

confinement↗

Characterizing the Quantum-Confined Stark Effect in Semiconductor Quantum Dots and Nanorods for Single-Molecule Electrophysiology

We optimized the performance of quantum-confined Stark effect (QCSE)-based voltage nanosensors. A high-throughput approach for single-particle QCSE characterization was developed and utilized to screen a library of such nanosensors. Type-II ZnSe/CdS-seeded nanorods were found to have the best performance among the different nanosensors evaluated in this work. The degree of correlation between intensity changes and spectral changes of the exciton's emission under an applied field was characterized. An upper limit for the temporal response of individual ZnSe/CdS nanorods to voltage modulation was characterized by high-throughput, high temporal resolution intensity measurements using a novel photon-counting camera. The measured 3.5 μs response time is limited by the voltage modulation electronics and represents ~30 times higher bandwidth than needed for recording an action potential in a neuron.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen Confinement in Carbon Nanopores: Extreme Densification at Ambient Temperature

In-situ small angle neutron scattering (SANS) studies of hydrogen confined in small pores of polyfurfuryl alcohol-derived activated carbon (PFAC) at room-temperature provided for the first time its phase behavior in equilibrium with external H2 at pressures up to 200 bar. The data was used to evaluate the density of the adsorbed fluid, which appears to be a function of both pore size and pressure, and approaches the liquid hydrogen density in narrow nanopores at 200 bar. The surface-molecule interactions responsible for densification of hydrogen within the pores create internal pressures which exceed by a factor of up to ~ 60 the external gas pressures, confirming the benefits of adsorptive over compressive storage. These results can be utilized to guide the development of new carbon adsorbents tailored for maximum hydrogen storage capacities at near ambient temperatures.

08 HYDROGEN↗

No Confinement Needed: Observation of a Metastable Hydrophobic Wetting Two-Layer Ice on Graphene

The structure of water at interfaces is crucial for processes ranging from photocatalysis to protein folding. Here, we investigate the structure and lattice dynamics of two-layer crystalline ice films grown on a hydrophobic substrate - graphene on Pt(111) - with low energy electron diffraction, reflection-absorption infrared spectroscopy, rare-gas adsorption/desorption, and ab-initio molecular dynamics. Unlike hexagonal ice, which consists of stacks of puckered hexagonal "bilayers", this new ice polymorph consists of two flat hexagonal sheets of water molecules in which the hexagons in each sheet are stacked directly on top of each other. Such two-layer ices have been predicted for water confined between hydrophobic slits, but not previously observed. Our results show that the two-layer ice forms even at zero pressure at a single hydrophobic interface by maximizing the number of hydrogen bonds at the expense of adopting a non-tetrahedral geometry with weakened bonds.

08 HYDROGEN↗

Influence of Aging and Environment on Nanoparticle Chemistry: Implication to Confinement Effects in Nanoceria

The oxidation state switching of cerium in cerium oxide nanoparticles is studied in detail. The influence of synthesis medium, aging time and local environment on the oxidation state switching, between +3 and + 4, is analyzed by tracking the absorption edge using UV-Visible spectroscopy. It is observed that by tuning the local environment, the chemistry of the nanoparticles could be altered. These time dependent, environmentally induced changes likely contribute to inconsistencies in the literature regarding quantum-confinement effects for ceria nanoparticles. The results in this article indicate that there is a need to carry out comprehensive analysis of nanoparticles while considering the influence of synthesis and processing conditions, aging time and local environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimation of pump-out and positive radial electric field created by electron cyclotron resonance heating in magnetic confinement devices

A fast approximate technique for calculating the outward electron flux induced by electron cyclotron resonance heating in magnetic confinement devices with ripple is presented. A model based on Langevin equations that allows one to compute the microscopic flux into the loss cone in momentum space is used. The outward macroscopic electron flux is also obtained for given plasma profiles. This extra flux causes the onset of a positive ambipolar electric field whose time evolution is demonstrated to depend strongly on the poloidal damping for electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion flow convergence in spherical inertial electrostatic confinement devices

Data collected with automated double and single probes is used to evaluate the convergence of ion flow in a spherical inertial electrostatic confinement device operated in glow discharge mode. A novel method based on the invasive nature of electrostatic probes is used to evaluate the width of the ion density peak. Over much of the star mode discharge regime, it is found that R{sub c}/R{sub g}{approx}0.125 to 0.167 where R{sub c} is the ion core radius, and R{sub g} is the radius of the cathode grid, which remains fixed for all discharge conditions considered here. Near the star-to-jet mode transition, the technique shows that R{sub c}/R{sub g}{approx}0.250, in agreement with direct measurements of the ion density profile with the double probe. The influences of space charge accumulation and cathode grid deflection are evaluated with floating potential measurements and tangential electric field measurements, respectively. It is concluded that the observed core growth is a result of ion microchannel degradation caused by an increased frequency in inelastic and elastic molecular encounters, while the effects of space charge are negligible.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Aperture Tolerances for Neutron-Imaging Systems in Inertial Confinement Fusion

Neutron imaging systems are being considered as an ignition diagnostic for the National Ignition Facility (NIF) [Hogan et al. Nucl. Fusion 41, 567 (2001)]. Given the importance of these systems, a neutron-imaging design tool is being used to quantify the effects of aperture fabrication and alignment tolerances on reconstructed neutron images for inertial confinement fusion. The simulations indicate that alignment tolerances of more than 1 mrad would introduce measurable features in a reconstructed image for both pinholes and penumbral aperture systems. These simulations further show that penumbral apertures are several times less sensitive to fabrication errors than pinhole apertures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy confinement and magnetic field generation in the SSPX spheromak

The Sustained Spheromak Physics Experiment (SSPX) [E.B. Hooper, et. al., Nuclear Fusion, Vol. 39, No. 7] explores the physics of efficient magnetic field buildup and energy confinement, both essential parts of advancing the spheromak concept. Extending the spheromak formation phase increases the efficiency of magnetic field generation with the maximum edge magnetic field for a given injector current (B/I) from 0.65 T/MA previously to 0.9 T/MA. We have achieved the highest electron temperatures (T{sub e}) recorded for a spheromak with T{sub e} > 500 eV, toroidal magnetic field {approx}1 T and toroidal current ({approx}1 MA) [R.D. Wood, D.N. Hill, H.S. McLean, E.B. Hooper, B.F. Hudson, J.M. Moller, 'Improved magnetic field generation efficiency and higher temperature spheromak plasmas', submitted to Physical Review Letters]. Extending the sustainment phase to > 8 ms extends the period of low magnetic fluctuations (< 1 %) by 50%. The NIMROD 3-D resistive MHD code [C.R. Sovinec, T.A. Gianakon, E.D. Held, S.E. Kruger and D.D. Schnack, The NIMROD Team, Phys. Plasmas 10, 1727 (2003)] reproduces the observed flux amplification {Psi}{sub pol}/{Psi}{sub gun}. Successive gun pulses are demonstrated to maintain the magnetic field in a quasi-steady state against resistive decay. Initial measurements of neutral particle flux in multi-pulse operation show charge-exchange power loss < 1% of gun input power and dominantly collisional majority ion heating. The evolution of electron temperature shows a distinct and robust feature of spheromak formation: a hollow-to-peaked T{sub e}(r) associated with q {approx} 1/2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An accelerator based fusion-product source for development of inertial confinement fusion nuclear diagnostics

A fusion-product source, utilizing a 150 kV Cockraft-Walton linear accelerator, has been refurbished to provide a reliable nuclear diagnostic development tool to the national inertial confinement fusion (ICF) research program. The accelerator is capable of routinely generating DD reaction rates at {approx}10{sup 7}/s when using a 150 kV, 150 {mu}A deuterium (D) beam onto an erbium (Er) or titanium (Ti) target doped with D, and D{sup 3}He reaction rates at {approx}5x10{sup 5}/s when using a using a 120 kV, {approx}100 {mu}A D beam onto a Er or Ti target doped with {sup 3}He. The new accelerator is currently being used in a number of projects related to the national ICF program at the OMEGA Laser Fusion Facility [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)], which includes the wedge range filter charged-particle spectrometry program [F. H. Seguin et al., Rev. Sci Instrum. 75, 3520 (2004)] and the magnetic recoil neutron spectrometer [J. A. Frenje et al., Rev. Sci. Instrum. 72, 854 (2001)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Proton-beam driven fast ignition of inertially confined fuels: Reduction of the ignition energy by the use of two proton beams with radially shaped profiles

Fast ignition of a spherical compressed deuterium-tritium assembly induced by the energy deposition of laser-accelerated proton beams is considered. An efficient way to reduce the ignition energy consists of using a two proton beams scheme [M. Temporal, Phys Plasmas 13, 122704 (2006)]. For a uniformly compressed fuel at 500 g/cm{sup 3} irradiated by proton beams with Maxwellian energy distribution with a temperature of 4 MeV, the ignition energy is 10 kJ using only one proton beam and reduces to a total of 8 kJ with the two-beam scheme. Further reduction of the ignition energy is found by using a first beam with annular radial profile and a second beam with the uniform radial profile. It is found that the first beam causes some additional fuel compression and confinement that decrease the total beam energy required for the ignition to 6 kJ, which is 40% smaller than in the case of a single beam with uniform radial profile.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of backlighting sources for a Compton radiography diagnostic of inertial confinement fusion targets (invited)

We present scaled demonstrations of backlighter sources, emitting bremsstrahlung x rays with photon energies above 75 keV, that we will use to record x-ray Compton radiographic snapshots of cold dense DT fuel in inertial confinement fusion implosions at the National Ignition Facility (NIF). In experiments performed at the Titan laser facility at Lawrence Livermore National Laboratory, we measured the source size and the bremsstrahlung spectrum as a function of laser intensity and pulse length from solid targets irradiated at 2x10{sup 17}-5x10{sup 18} W/cm{sup 2} using 2-40 ps pulses. Using Au planar foils we achieved source sizes down to 5.5 {mu}m and conversion efficiencies of about 1x10{sup -13} J/J into x-ray photons with energies in the 75-100 keV spectral range. We can now use these results to design NIF backlighter targets and shielding and to predict Compton radiography performance as a function of the NIF implosion yield and associated background.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of ion flow dynamics in an inertial electrostatic confinement device through sequential grid construction

Experiments were performed to understand the dynamics of the ion flow in an inertial electrostatic confinement (IEC) device. This was done by monitoring the fusion rate as the symmetry of the grid was increased starting with a single loop all the way until the entire grid is constructed. The fusion rate was observed to increase with grid symmetry and eventually saturate. A single loop grid was observed to generate a cylindrical ({approx}line) fusion source. The ion flow distribution was measured by introducing fine wires across a single loop of the grid in the form of a chord of a circle (chord wires). This study revealed that with increased symmetry of the cathode grid wires the convergence of the ions improves. The chord wires provided electrons for ionization even at low pressures ({approx}6.67 mPa) and helped sustain the plasma. The impinging ions heat these wires locally and the temperature of the wires was measured using an infrared thermometer that was used to understand the ion flow distribution across the cathode grid. The presence of the grid wires seems to affect the fusion rate more drastically than previously thought (was assumed to be uniform around the central grid). Most of the fusion reactions were observed to occur in the ion microchannels that form in gaps between the cathode wires. This work helps understand the fusion source regimes and calibrate the IEC device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Composition of the source region plasma in inertial electrostatic confinement devices

The ion species composition in the source region of inertial electrostatic confinement (IEC) devices plays an important role in the atomic and molecular physics processes in the device and in the resulting energy spectrum of the fast ions and the neutron production rate. A zero dimensional rate equation model for the ion species composition in the source region of IEC devices is presented and compared with experimental measurements on the Wisconsin IEC device [J. F. Santarius, G. L. Kulcinski, R. P. Ashley et al., Fusion Sci. Tech. 47, 1238 (2005)]. The ion species composition is measured using an ion acoustic wave diagnostic; the results are in good agreement with the theoretical predictions. Both the theory and the experimental results show that D{sub 3}{sup +} ions are the majority species in the source region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Loss of confinement at the density limit due to the suppression of stabilizing zonal flows by magnetic turbulence

The character of particle and energy transport in numerical simulations of drift-ballooning turbulence changes dramatically as the density exceeds a critical limit. When the density is not too large, then unstable drift-ballooning fluctuations grow and nonlinearly generate a sheared zonal (flux surface averaged) flow that saturates the turbulence. But when diamagnetic drift effects are small and the density increases beyond a critical limit, then the turbulent density flux increases monotonically in time to large values without saturation. This loss of confinement is caused by the suppression of the stabilizing zonal flow by the magnetic component of the turbulence. A Kelvin-Helmholtz-like shear-flow instability does not play any role in reducing the magnitude of the zonal flow. The magnetic turbulence prevents the zonal flow from growing large enough to become shear-flow unstable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of nuclear reactions and {alpha}-particle transport in the dynamics of inertial confinement fusion capsules

This paper is devoted to the study of the deceleration phase of inertial confinement capsules. The purpose is to obtain a zero-dimensional model that has the form of a closed system of ordinary differential equations for the main hydrodynamic quantities. The model takes into account the energy released by nuclear reactions, a nonlocal model for the {alpha}-particle energy deposition process, and radiation loss by electron bremsstrahlung. The asymptotic analysis is performed in the case of a strong temperature dependence of the thermal conductivity. We finally study the beginning of the expansion phase after stagnation to derive an ignition criterion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of the electron cyclotron resonance plasma confinement on reducing the bremsstrahlung production of an electron cyclotron resonance ion source with metal-dielectric structures

The influence of metal-dielectric (MD) layers (MD structures) inserted into the plasma chamber of an electron cyclotron resonance ion source (ECRIS) onto the production of electron bremsstrahlung radiation has been studied in a series of dedicated experiments at the 14 GHz ECRIS of the Institut fuer Kernphysik der Universitaet Frankfurt. The IKF-ECRIS was equipped with a MD liner, covering the inner walls of the plasma chamber, and a MD electrode, covering the plasma-facing side of the extraction electrode. On the basis of similar extracted currents of highly charged ions, significantly reduced yields of bremsstrahlung radiation for the 'MD source' as compared to the standard (stainless steel) source have been measured and can be explained by the significantly better plasma confinement in a MD source as compared to an ''all stainless steel'' ECRIS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗