Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Variational”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Discovery of a long-term periodic variation in LMC X-3

The highly variable X-ray luminosity of LMC X-3 is found to be strongly modulated with a period of about 198 (or possibly about 99) days. Observations from satellites show this periodic variation. For energies of less than 13 keV, the X-ray intensity and hardness are positively correlated; for higher energies, there appears to be no correlation. Available optical photometry indicates the mean V brightness also varies by more than 1 mag with this same long-term period. The regularity of this 'clock' in LMC X-3 suggests that it may be related to an accretion-disk precession, similar to that seen in LMC X-4, Her X-1, SS 433, or possibly periodic variations in the mass-transfer rate.

Cowley, A. P.↗

Temporal variation of heat and moisture flux divergence in the FIFE atmospheric boundary layer during spring

A one-day investigation of the atmospheric boundary layer (ABL) is reported in which an aircraft monitors the temporal and spatial variations of heat and moisture turbulent-flux divergences. Incoming solar radiation is similar over natural prairie land and agriculturally developed land although the heat and moisture values show significant differences over the surfaces. Other temporal variations are noted which demonstrate that ABL transport of sensible and latent heat is affected by complex variables even under simple synoptic conditions.

Grossman, Robert L.↗

Empirical models of the latitudinal variations of Te and Ne in the ionosphere at solar maximum

A global spectral model of electron temperature and density is developed in which only the latitudinal variations observed in narrow altitude and local time bands are used. The measurements for this purpose are obtained during intervals that are short as compared to a season. By suppressing all variables except latitude the model can use 17th-order polynomials and generates a latitudinal structure that is similar to that described by the observational data. The treatment is designed to correct for the eccentricity and slow evolution of the data-collection satellite orbit so that small-scale features can be resolved. By comparing the results of a global model and the present latitudinal model to observational measurements of electron temperature and density it is shown that auroral-zone and midlatitude trough structures are not resolved in latitudinal models. The observational data can be used to study the response of electron density and temperature to solar EUV flux variations and geomagnetic activity.

Brace, L. H.↗

Space-time variations of outgoing longwave and shortwave reflected radiation

Hovmoller diagrams are used to examine radiation variations at synoptic space and time scales. These variations are quantified statistically via the application of correlations in the time-longitude domain. In higher latitudes where the outgoing LW radiation (OLR) and the SW reflected (SWR) radiation are independent of longitude, the 2D autocorrelation function shows that the maximum characteristic lengths are in the downstream direction. These characteristic lengths provide a good measure of zonally advected atmospheric phenomena. Also from the 2D autocorrelation functions, correlation speeds were determined, which match well with mean longitudinal wind directions and speeds. This indicates that the major time-varying features advect with the flow, rather than propagating in some other fashion.

Rutan, David↗

The semiannual variation of great geomagnetic storms and the postshock Russell-Mcpherron effect preceding coronal mass ejecta

Recent results indicate that the intense southward interplanetary magnetic fields (IMFs) responsible for great storms can reside in the postshock plasma preceding the driver gas of coronal mass ejections (CMEs) as well as in the driver gas itself. It is proposed here that strong southward fields in the postshock flow result from a major increase in the Russell-McPherron polarity effect through a systematic pattern of compression and draping within the ecliptic plane. Differential compression at the shock increases the Parker spiral angle and, consequently, the azimuthal field component that projects as a southward component onto earth's dipole axis. The resulting prediction is that southward fields in the postshock plasma maximize at the spring (fall) equinox in CMEs emerging from toward (away) sectors. This pattern produces a strong semiannual variation in postshock IMF orientation and may account at least in part for the observed semiannual variation of the occurrence of great geomagnetic storms.

Crooker, N. U.↗

Compositional variations in Apollo 17 soils and their relationship to the geology of the Taurus-Littrow site

New compositional data for major and trace elements in Apollo 17 solids are combined with data from the literature in order to constrain a mass-balance model that accounts for the compositions of most solids as mixtures of a small number of lithologic components observed at the site. Variation in the proportions of six chemical components accounts for most of the compositional variation in the solids. Each of the components is represented by lithological components observed in the regolith. Three of the chemical components are of mare origin: high-Ti mare basalt, LTV basalt, and pyroclastic orange glass. Three are of highland origin: noritic impact-melt breccia, anorthositic norite breccia, and high-Mg/Fe troctolites and norites. Results from a six-component mass-balance model indicate that VLT basalt composes only about 8 percent of the total basalt component, while orange glass composes up to 26 percent of some solids. The troctolite/norite component is only important in soils from the North Massif.

Korotev, Randy L.↗

A variationally coupled FE-BE method for elasticity and fracture mechanics

A new method for coupling finite element and boundary element subdomains in elasticity and fracture mechanics problems is described. The essential feature of this new method is that a single variational statement is obtained for the entire domain, and in this process the terms associated with tractions on the interfaces between the subdomains are eliminated. This provides the additional advantage that the ambiguities associated with the matching of discontinuous tractions are circumvented. The method leads to a direct procedure for obtaining the discrete equations for the coupled problem without any intermediate steps. In order to evaluate this method and compare it with previous methods, a patch test for coupled procedures has been devised. Evaluation of this variationally coupled method and other methods, such as stiffness coupling and constraint traction matching coupling, shows that this method is substantially superior. Solutions for a series of fracture mechanics problems are also reported to illustrate the effectiveness of this method.

Lu, Y. Y.↗

Time-periodic variations in stratospheric ozone from satellite observations

The time-periodic variations in stratospheric zonal mean ozone number density are examined with emphasis on annual and semi-annual oscillations. The data base for this analysis is the ozone observation from the SAGE II satellite instrument. A multiple linear regression method is adopted for the analysis. The results show that the amplitudes and phases of the time-periodic ozone variations are functions of altitude and latitude.

Wang, Pi-Huan↗

Sensitivity of tire response to variations in material and geometric parameters

A computational procedure is presented for evaluating the analytic sensitivity derivatives of the tire response with respect to material and geometric parameters of the tire. The tire is modeled by using a two-dimensional laminated anisotropic shell theory with the effects of variation in material and geometric parameters included. The computational procedure is applied to the case of uniform inflation pressure on the Space Shuttle nose-gear tire when subjected to uniform inflation pressure. Numerical results are presented showing the sensitivity of the different response quantities to variations in the material characteristics of both the cord and the rubber.

Noor, Ahmed K.↗

Constraints on mantle viscosity from relative sea level variations in Hudson Bay

Frechet kernels for the RSL data in Hunson Bay are computed to determine the detailed depth-dependent sensitivity of the data to variations in a viscosity profile which is consistent with the past inferences. The RSL data provide a robust constraint on the average viscosity in the top half of the lower mantle only (the average must be near 10 exp 21 Pa s). The data admit models whose average viscosity in the deep mantle (below 1800 km depth) and in the upper mantle can differ significantly from the value (near 10 exp 21 Pa s) estimated for the top half of the lower mantle. The total variation in the viscosity from the surface to the CMB can exceed an order of magnitude or more and still satisfy the constraint provided by the Hudson Bay RSL data set. The necessity of invoking an isoviscous mantle model in previous studies is a consequence of the limited class of viscosity model solutions employed in those studies.

Mitrovica, J. X.↗

Development of a four-dimensional variational analysis system using the adjoint method at GLA. I - Dynamics

Recent developments in the field of data assimilation have pointed to variational analysis (essentially least-squares fitting of a model solution to observed data) using the adjoint method as a new direction that holds the potential of major improvements over the current optimal interpolation method. This paper describes the initial effort in the development of a 4D variational analysis system. Although the development is based on the Goddard Laboratory for Atmospheres General Circulation Model (GCM), the methods and procedures described in this paper can be applied to any model. The adjoint code that computes the gradients needed in the analysis can be written directly from the GCM code. An easy error-detection technique was devised in the construction of the adjoint model. Also, a method of determining the weights and the preconditioning scales for the cases where model-generated data, which are error free, are used as observation is proposed. Two test experiments show that the dynamics part of the system has been successfully completed.

Chao, Winston C.↗

Venus thermospheric response to short-term solar variations

The mechanism responsible for cooling the dayside thermosphere of Venus from about 700 K to 300 K (Noll and McElroy, 1972) is examined by analyzing in situ measurements made by the Pioneer Venus Orbiter of the weak response of the thermosphere to short-term solar variations related to 27-day solar rotation. It is shown that, in order to cool the Venus dayside thermosphere to observed levels and to simultaneously explain the weak 27-day variations in the atmosphere, it is necessary to invoke strong CO2 cooling which is controlled principally by collisions of CO2 with atomic oxygen.

Keating, G. M.↗

Increased heat transfer to elliptical leading edges due to spanwise variations in the freestream momentum - Numerical and experimental results

A study of the effect of spanwise variation on leading edge heat transfer is presented. Experimental and numerical results are given for a circular leading edge and for a 3:1 elliptical leading edge. It is demonstrated that increases in leading edge heat transfer due to spanwise variations in freestream momentum are comparable to those due to freestream turbulence.

Rigby, D. L.↗

Cosmic-ray variations and magnetic field fluctuations in the outer heliosphere

We have formally confirmed that galactic cosmic ray intensity variations measured by Voyager 2 during recovery from solar maximum are caused by travelling compressions and rarefactions in the mean interplanetary magnetic field. We used Voyager's nearly continuous magnetic field data as input to a time-independent, spherically-symmetric, cosmic ray transport equation in the force-field approximation. The solutions closely followed the count rate of cosmic rays greater than 75 MeV/nucleon over four years. This strongly supports prior theoretical assertions that turbulent interaction regions travelling with the solar wind are the major cause of the solar-cycle variation of galactic cosmic rays in the ecliptic region.

Perko, J. S.↗

Variation in multiring basic structures as a function of impact angle

Previous studies have demonstrated that the impact process in the laboratory varies as a function of impact angle. This variation is attributed to changes in energy partitioning and projectile failure during the impact and, in simple craters, produces a sequence of progressively smaller and more asymmetric crater forms as impact angle decreases from approximately 20 degrees. Variations in impact angle can produce differences in the appearance of multiring impact basins. Comparisons of Orientale to the more oblique impact structure at Crisium also suggests that these differences primarily reflect the degree of cavity collapse. The relative changes in massif ring topography, basin scarp relief, and the distribution of peripheral mare units are consistent with a reduction in degree of cavity collapse with decreasing impact angle. The prominent uprange basin scarps and the restriction of tectonically derived peripheral mare units along uprange ring structures also may indicate an uprange enhancement of failure during cavity collapse. Finally, although basin ring faults appear to be preferred pathways for mare volcanism, fault-controlled peripheral mare volcanism occurs most readily uprange of an oblique impact; elsewhere such volcanism apparently requires superposition of an impact structure on the ring fault.

Wichman, R. W.↗

Extensive lava flow fields on Venus: Preliminary investigation of source elevation and regional slope variations

Large-volume lava flow fields have been identified on Venus, the most areally extensive of which are known as fluctus and have been subdivided into six morphologic types. Sheetlike flow fields (Type 1) lack the numerous, closely spaced, discrete lava flow lobes that characterize digitate flow fields. Transitional flow fields (Type 2) are similar to sheetlike flow fields but contain one or more broad flow lobes. Digitate flow fields are divided further into divergent (Types 3-5) and subparallel (Type 6) classes on the basis of variations in the amount of downstream flow divergence. As a result of our previous analysis of the detailed morphology, stratigraphy, and tectonic associations of Mylitta Fluctus, we have formulated a number of questions to apply to all large flow fields on Venus. In particular, we would like to address the following: (1) eruption conditions and style of flow emplacement (effusion rate, eruption duration), (2) the nature of magma storage zones (presence of neutral buoyancy zones, deep or shallow crustal magma chambers), (3) the origin of melt and possible link to mantle plumes, and (4) the importance of large flow fields in plains evolution. To answer these questions we have begun to examine variations in flow field dimension and morphology; the distribution of large flow fields in terms of elevation above the mean planetary radius; links to regional tectonic or volcanic structures (e.g., associations with large shield edifices, coronae, or rift zones); statigraphic relationships between large flow fields, volcanic plains, shields, and coronae; and various models of flow emplacement in order to estimate eruption parameters. In this particular study, we have examined the proximal elevations and topographic slopes of 16 of the most distinctive flow fields that represent each of the 6 morphologic types.

Magee-Roberts, K.↗

On the variation of the Nimbus 7 total solar irradiance

For the interval December 1978 to April 1991, the value of the mean total solar irradiance, as measured by the Nimbus-7 Earth Radiation Budget Experiment channel 10C, was 1,372.02 Wm(exp -2), having a standard deviation of 0.65 Wm(exp -2), a coefficient of variation (mean divided by the standard deviation) of 0.047 percent, and a normal deviate z (a measure of the randomness of the data) of -8.019 (inferring a highly significant non-random variation in the solar irradiance measurements, presumably related to the action of the solar cycle). Comparison of the 12-month moving average (also called the 13-month running mean) of solar irradiance to those of the usual descriptors of the solar cycle (i.e., sunspot number, 10.7-cm solar radio flux, and total corrected sunspot area) suggests possibly significant temporal differences. For example, solar irradiance is found to have been greatest on or before mid 1979 (leading solar maximum for cycle 21), lowest in early 1987 (lagging solar minimum for cycle 22), and was rising again through late 1990 (thus, lagging solar maximum for cycle 22), having last reported values below those that were seen in 1979 (even though cycles 21 and 22 were of comparable strength). Presuming a genuine correlation between solar irradiance and the solar cycle (in particular, sunspot number) one infers that the correlation is weak (having a coefficient of correlation r less than 0.84) and that major excursions (both as 'excesses' and 'deficits') have occurred (about every 2 to 3 years, perhaps suggesting a pulsating Sun).

Wilson, Robert M.↗

Three-dimensional elastic-plastic finite-element analyses of constraint variations in cracked bodies

Three-dimensional elastic-plastic (small-strain) finite-element analyses were used to study the stresses, deformations, and constraint variations around a straight-through crack in finite-thickness plates for an elastic-perfectly plastic material under monotonic and cyclic loading. Middle-crack tension specimens were analyzed for thicknesses ranging from 1.25 to 20 mm with various crack lengths. Three local constraint parameters, related to the normal, tangential, and hydrostatic stresses, showed similar variations along the crack front for a given thickness and applied stress level. Numerical analyses indicated that cyclic stress history and crack growth reduced the local constraint parameters in the interior of a plate, especially at high applied stress levels. A global constraint factor alpha(sub g) was defined to simulate three-dimensional effects in two-dimensional crack analyses. The global constraint factor was calculated as an average through-the-thickness value over the crack-front plastic region. Values of alpha(sub g) were found to be nearly independent of crack length and were related to the stress-intensity factor for a given thickness.

Newman, J. C., Jr.↗