Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Nuclear Forensics for Irradiated Materials using Kernel Regression Models

The ultimate purpose of nuclear forensics is to locate the origin of nuclear and other radioactive materials out of regulatory control used in nuclear security events such as classical forensics. For this purpose, some specific characteristics of interdicted materials (referred to as 'signatures') should be defined to compare the known sample database. In some cases, involved with irradiated material, the signatures could be specific amount of fission product inventory depending on reactor operational histories such as reactor type, initial enrichment, burn up rate of nuclear fuel and cooling period after irradiation in the reactor. In order to make inference model for irradiated material for nuclear forensics, we suggested 3 ways as follows; (i) analyzing ORIGEN produced nuclear substances for the fission product inventory, (ii) classifying the range of reactor type, (iii) predicting the operational history from the fission product inventory. In terms of nuclear substance analysis, the construction of spent fuel database has been internationally carried out since ITWG (Nuclear Smuggling International Technical Working Group) was established in 1995. However, enough sample data cannot be obtained in Korea to determine reactor type and operational histories because analyzing nuclear substances have been limited due to the international regulation. Thus, this study does not mention how to obtain mass or ratios of nuclides for the spent fuel. We just have generated simulation sample data as a fission product inventory using ORIGEN to construct spent fuel database. When unidentified radioactive materials are discovered, it is assumed that mass or ratios of the nuclides are analyzed by certain methods which are available in Korea as well as other countries. Then, a reactor type is determined, and finally, regression model can locate the origin or source of the radioactive materials by inferring operational histories using the fission product inventory. There are some studies on the classification of reactor type using statistical methods. As a part of predicting the operational history, this paper focuses on the development of spent fuel inference algorithm for nuclear forensics to estimate reactor operational histories that reflect characteristics of a reactor from the fission product inventory. The spent fuel inference algorithm for nuclear forensics has been developed on the basis of Kernel Regression (KR) which can conditionally generate the estimated output data by giving weight depending on geometric distance between sample data and input data. Also the KR which comprises Auto-Associative KR and Inferential KR have some benefits that can estimate only using data without assumption for specific physical model and re-learning process. Auto-associative KR (AAKR) was used to sort out outliers of input data and Inferential KR (IKR) was carried out to predict the operational histories for spent fuel. All of regression algorithms were performed in R programming tool. From the validation of both AAKR and IKR, it is expected that kernel regression has enough accuracy to be applied to nuclear forensics for spent fuel. Once the nuclear substance is measured to fill the fission product inventory with a certain reactor type, this kernel regression algorithm would predict the operational histories of spent fuel with high accuracy. Finally, this information is expected to be useful to find the origin of irradiated materials. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

Neutronics of Advanced-Fuel Fusion Experiments with DT Triggering

Nuclear fusion studies are currently devoted to the Deuterium-Tritium (DT) fuel cycle, the easiest way to reach ignition. The recent stress on safety by the world community has stimulated the research on other fuel cycles, based on advanced reactions, such as Deuterium-Helium-3 (DHe). With DHe, it is not necessary to breed and fuel tritium. The DHe cycle has a very low presence of energetic fusion neutrons, due to DD and DT side reactions, and it has the possibility to obtain electrical power by direct energy conversion of the protons produced by the fusion reactions. DHe fusion has its own set of problems, such as the availability of {sup 3}He and the attainment of the higher plasma parameters. To explore the possibilities of DHe plasmas, a burning plasma experiment at high magnetic field and high plasma densities is particularly attractive. Ignitor is a proposed compact high-magnetic field tokamak, aimed at studying plasma-burning conditions in Deuterium-Tritium plasmas. The Ignitor experiment is designed to reach ignition under controlled DT burning conditions. The machine parameters have been established, on the basis of existing knowledge of the confinement properties of high density plasmas. The scientific goal of the Ignitor experiment is to approach, for the first time, the ignition conditions of a magnetically confined D-T plasma. However, the plasma density limit in Ignitor being well above the optimal density for DT ignition, is potentially suitable to the higher densities required for DHe burning. In fact, Ignitor has been designed also to explore conditions where 14.7-MeV protons and 3.6-MeV alpha particles produced by the DHe reactions can supply a significant amount of thermal energy to a well-confined plasma. In particular, Ignitor can sustain plasma currents exceeding those required to confine proton orbits at birth, and has more than sufficiently high densities so that the slowing-down time of both the protons and the DT alpha particles is shorter than the electron energy replacement time of the thermal plasma in which they are produced. Preliminary analyses show that a fusion power PF around 2 MW, may be reached. As a start, Ignitor can perform initial studies at the level of approximately 1 MW of power in charged particles from the DHe reaction in a mostly DT plasma. CANDOR, a design evolution of Ignitor in the direction of a reactor using a DHe fuel cycle, has been proposed; it is a feasibility study of a high-field DHe experiment of larger dimensions and higher fusion power than Ignitor, however still based on the core Ignitor technologies. The main characteristics of the CANDOR machine are the following: the major radius Ro is about double than Ignitor, plasma currents up to 25 MA with toroidal magnetic fields B{sub T} = 13 T can be produced. Unlike Ignitor, CANDOR would operate with higher values of poloidal beta around unity and the central part of the plasma column in the Second Stability region. The characteristic times over which the plasma discharge can be sustained are longer by more than a factor of 4 than those of Ignitor. To produce such a strong magnetic field in a larger machine, the toroidal field coils have been divided into two sets of coils and the central solenoid (air core transformer) is placed between them in the inboard part. In CANDOR, the DHe burning regime can be reached, by a combination of ICRF heating and alpha particle heating due to DT fusion reactions, which take the role of a sort of trigger. Thanks to this fact, and unlike other proposed DHe fusion experiments, CANDOR is capable of reaching DHe ignition using the existing technologies, and present knowledge of plasma confinement phenomena. With the initial use of DT, where tritium comprises some 50% of an initial lower density DT plasma, but is not added thereafter, the need for an intense auxiliary heating, which is one of the main technological drawbacks of DHe ignition, would be considerably alleviated, becoming feasible with the present technology. However, this method has the disadvantage of using tritium and of presenting a higher neutron flux (due to DT reactions) than 'pure' DHe plasmas, generating a neutron flux transient when passing from the initial DT trigger reaction to the final DHe burning plasma. However, for an experimental machine one-of-a-kind of relatively small dimensions, this is not an issue. (authors)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2019

A Study on the Comparison of International WTS for Integrated Management of Radioactive Waste - 19034

Domestic radioactive waste is generated by nuclear power plants, the Korea Atomic Energy Research Institute and KEPCO Nuclear Fuel Company. These nuclear energy agencies have their own waste tracking system. To track waste more efficiently, it is necessary to build an integrated tracking system from the viewpoint of the final disposer. As for the korea Atomic Energy Research Institute, the decommissioning waste due to the decommissioning of research reactors No. 1 and 2, and the low and intermediate-level radioactive waste, generated by the operation of the High Flux Advanced Neutron Application Reactor(HANARO), account for the most. The solid waste from each facility and laboratory is sorted and collected according to radiation levels and the contents. For starters, according to the contents, the waste is divided into combustible, noncombustible compressible and non-compressible waste. The combustible waste, generated by the Korea Atomic Energy Research Institute, is treated according to the low and intermediate-level radioactive waste delivery regulation of the Nuclear Safety and Security Commission and the acceptance criteria of the disposal facility. KEPCO Nuclear Fuel Company is making the nuclear fuel used in nuclear power plants. Radioactive waste is generated in the nuclear fuel manufacturing process, and it is classified into 8 types of waste according to the solid waste management procedure. Most of the radioactive waste, generated while KEPCO Nuclear Fuel Company processes the light-water reactor and heavy-water reactor nuclear fuel, is classified as low and intermediate-level radioactive waste. The radioactive liquid waste, generated in the radiation controlled area in nuclear fuel processing facilities, is divided into low-concentration liquid waste and high-concentration liquid waste. The miscellaneous solids, generated in the Hanbit NPP of Korea Hydro and Nuclear Power Co., Ltd., are classified in consideration of the physical properties, density and amount of the waste, and substances subject to restricted disposal. This paper investigated information on the structure, functions and maintenance of the systems implemented and operated by individual countries and IAEA, and the types of managed data, and analyzed the detailed configuration of the system and the characteristics of DBMS (Data Base Management System), and discovered during the analysis process the information on the waste management in each country or institution. This paper investigated the classification standards and treatment methods according to the characteristics of the radioactive substances handled by each agency. These classification and treatment methods can be applied to the database when the radioactive waste tracking system is implemented in the future. Also, this paper analyzed the radioactive waste tracking system of each country. Most overseas waste tracking systems are configured based on the ORACLE DBMS. The ORACLE DBMS is highly secure, and can manage large-scale databases. Also, Germany's ReVK and US IWTS are using the Bar-Code system that can track and manage all waste data, generated during decommissioning or transportation, in real time, and the real-time tracking system of web-based US CID can simply create and output reports quickly. If the advantages of overseas waste tracking systems are added to the domestic integrated waste tracking system, more efficient and safer management of radioactive waste will be possible.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Legacy Waste Removal from Standpipes and Bunkers at Whiteshell Laboratories, Canada - 19040

In 1963 Atomic Energy of Canada Limited (AECL) founded the Whiteshell Nuclear Research Establishment (now Whiteshell Laboratories, WL) in Pinawa, Manitoba to conduct nuclear research. In 1997 AECL made a business decision to discontinue research programs and operations at WL. One of the major decommissioning tasks at WL is to remove radioactive waste from 171 in-ground standpipes and 7 Intermediate Level Waste bunkers located in the Waste Management Area (WMA). Veolia Nuclear Solutions, through its subsidiary Kurion (Canada) Inc., has been selected to design, fabricate, and commission a remote waste access and conditioning system to remediate the waste from the standpipes and ILW bunkers at WL. The agreement builds on Veolia Nuclear Solutions' successfully deploying similar technologies at other projects. This paper describes the bunkers and standpipes structures, the types of wastes stored, the potential hazards (flammable gas and pyrophoric materials), and the equipment proposed by Kurion for safely extracting, sorting, segregating and packaging this waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Decommissioning, Decontamination, and Disposal of LLW-LL, and ILW-LL at a Former Rare Earths Processing Facility in Malaysia - 19087

Geosyntec Consultants, Inc. (Geosyntec) was the design-build Contractor for a project involving the remediation and disposal of low level (LLW-LL and ILW-LL) NORM and TENORM wastes at a former rare earth processing facility in Malaysia. These sites were associated with a plant that extracted rare earth elements from local tin ores. Because of the naturally occurring radioactivity contained in the raw materials, these productions resulted in by-products and residues containing LLW-LL and ILW-LL thorium hydroxide and uranium hydroxide. The total mass of uranium (∼120 tons) and thorium (∼1,200 tons) managed in a single repository required the project design incorporate requirements related to inventory, security and safeguards around nuclear precursor materials. The requirement to consider a performance over a period of more than 10,000 years led to significant challenges in design and modeling of the disposal facility as this disposal facility was purposely designed and permitted as a final disposal for the LLW-LL and ILW-LL. The first phase of the project was the decommissioning, decontamination, and demolition of the 14- acre former rare earth processing plant and excavation of contaminated soils, construction of an engineered cell at the repository for waste disposal, and transportation and disposal of the waste materials into the cell. Final status surveys were carried out to allow the site to be successfully released by the Malaysian regulatory authorities as a clean site for re-development as common industrial use. Over 11,000 loads of material, including approximately 75,000 cubic meters of excavated soils and plant debris, were transported in specially designed steel transport boxes on public roads for disposal in the engineered cell. The second phase of the project included the design and construction of a second engineered cell, enhanced with protective barrier systems and a final cover system constructed of natural materials. Ancillary facilities such as substations, offices, processing buildings, and wastewater treatment plants were constructed to support retrieval and processing of the materials from more than 87,000 individual drums using a semi-automated process. The drums, waste packages, and other materials in the storage facility were systematically extracted, sorted, inventoried, solidified using Portland cement, transported, and disposed in the cell. All temporary facilities were decontaminated, demolished, and disposed in the cell. Radiological inventory and radiation safety programs were implemented to quantify the waste activity and to control exposure to workers and the public during the project. The total mass of radioactive contaminated waste disposed in the two projects is nearly 200,000 tons. The projects were carried out under a high level of scrutiny from Malaysian and international regulatory bodies. Between 2014 and 2017, performance monitoring and modeling activities were carried out to demonstrate that the disposal facility was performing in accordance with design requirements established by regulatory agencies. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Further Analyses of the Unburied Goiania Accident Packages - 19161

In 1987, in the city of Goiania, Brazil, a derelict teletherapy machine was disassembled by scavengers and Cs-137 was released in the environment, unleashing the biggest radiological accident in Brazil. During the 15 days before the accident was acknowledged, some contaminated materials were sold and delivered to recycling factories in a few cities in the state of Sao Paulo, Brazil, in the form of metal scrap and recycled paper bales. The contaminated material was then collected, the metal scrap was conditioned in forty-three 200-liter drums, and the paper bales were stored in fifty 1.6 cubic meter steel boxes at the interim storage of the Nuclear and Energy Research Institute (IPEN), in the city of Sao Paulo, and there remained ever since. In 2017, 30 years later, initial analyses were performed at a sample of these boxes, checking for their activity, weight, and incongruences between the original values recorded at the time of collection and the measurement results 30 years later. The results indicated that none of the boxes checked were close to the clearance limit and that, without any sort of treatment, this radioactive waste should be stored for at least 150 years more. Visual inspection could not be performed at that time. Nowadays, some of the boxes were opened and samples from the contaminated material inside were taken for analysis. The main objective of this work is to report the results from the evaluation of the physical state of this material. After these analyses, the treatment options for volume reduction that were previously proposed were reviewed, and the method that best suits the current characteristics of the waste was chosen. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Deactivation and Demolition (D and D) of the Toxic Substance Control Act (TSCA) Incinerator Oak Ridge, Tennessee - 19184

UCOR, an AECOM-led partnership with Jacobs, manages the cleanup of the 2,200-acre East Tennessee Technology Park for its client, the U.S. Department of Energy (DOE), in Oak Ridge, Tennessee. The site was contaminated with radioactive, hazardous and industrial wastes generated by more than 40 years of national defense and energy missions. In 1989, the U.S. Environmental Protection Agency (EPA) added the Oak Ridge Reservation to the National Priorities List of sites and facilities that pose a sufficient threat to human health or the environment to warrant cleanup. The U.S. Department of Energy is cleaning up the Oak Ridge Reservation under a Federal Facility Agreement with the EPA and the Tennessee Department of Environment and Conservation. Many types of waste have been managed and disposed as part of the multi-decade cleanup effort. One unique facility, the Toxic Substance Control Act (TSCA) Incinerator, was constructed at the Department of Energy's Est Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. The Incinerator was constructed in the mid-1980's and underwent a series of test burns and readiness reviews to obtain the necessary environmental permits and operating approvals from state and federal regulatory agencies. With these in place, the incinerator began routine operations in 1991. It was designed and permitted for receiving, sorting, storing, preparing, and thermally destroying low-level radioactive and RCRA mixed waste contaminated with PCBs. The incinerator was named after a law passed in 1976 that provides the U.S. Environmental Protection Agency with authority to require reporting, record-keeping, testing, and restrictions relating to chemical substances and/or mixtures. During its operating lifetime, the one-of-a-kind thermal treatment facility burned materials regulated under TSCA and the Resource Conservation and Recovery Act (RCRA), most notably radiologically-contaminated polychlorinated biphenyls (PCBs). The TSCA Incinerator met or exceeded environmental regulations and DOE requirements for the treatment of these types of wastes. After more than 18 years of operation and more than 35 million pounds of waste safely incinerated, the TSCA Incinerator shut down operations on December 2, 2009. The TSCA Incinerator has been called a national resource for DOE sites from coast to coast. As the only U.S. facility permitted to incinerate specialized types of wastes, it not only accepted material from the Oak Ridge Reservation but also other facilities across the nationwide DOE complex. Over the years, a dynamic team of hard working and talented people operated and maintained the facility under the most stringent environmental permits and site requirements. The facility has played a key role in the treatment of radioactive PCB and hazardous wastes (mixed wastes) from the Oak Ridge Reservation, as well as from other facilities across the DOE complex. Through its support to over 20 sites in the DOE complex, environmental waste from past and ongoing operations has been safely and permanently treated. In the years since it was shut down, deactivation workers have been preparing TSCA for demolition. This work scope included triple cleaning, rinsing of all production equipment and tanks to RCRA clean criteria, filling sumps, encapsulating PCB and radioactive contamination, removal of universal waste (asbestos. lead and mercury), draining and disposal of residual water in tanks and transfer piping, and removing and disposing of carbon vessels, which were part of the water management system. In 2018, the facility was successfully deactivated and demolished, permanently removing one of the most unique facilities in the DOE complex. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Keep It Smart and Simple - Henriette - The Advanced Designed Drum Gripper for Remote Handling Tasks - 19327

A power manipulator has many applications in the handling, treatment and packaging of radioactive waste. In high radiation environments, where humans cannot work safely, a power manipulator is essential to perform difficult and heavy tasks. For more than 40 years, Waelischmiller has provided power manipulators to the nuclear market. Specifically in a high radiation nuclear environment, electrical driven manipulators are preferred. The basic design of a power manipulator is divided into the following parts: Bridge, carriage, telescopic mast and manipulator arm. All parts are customizable in length, width and capacity. The standard power manipulator version is equipped with a manipulator arm. For the nuclear waste disposal industry, there is a special need for a drum gripper. Drums are used for packing low, medium or high activated material and for storage. After packing, the drums must be handled remotely. For both tasks, a power manipulator with a drum gripper is needed. For this project KTE (Kerntechnische Entsorgung Karlsruhe GmbH) required a total refurbishment of equipment in a cell used for handling, sorting and packaging radioactive waste drums. The power manipulator was obsolete and provided low availability and through put. This cell was an essential asset in their decommissioning process and was impacting KTE's ability to meet their volume objectives. Our challenge was to develop a new system with few details from the original cell construction. The new manipulator must meet all capabilities of the old system and in addition have the ability to achieve 180 degree tilting of the drums. An additional challenge was the requirement to use the existing rails in the cell which were very close to the roof structure which required a special design. Our project, named internally Henriette, is the first of its kind. The drum gripper is based on the power manipulator A1000 series. The biggest challenges in this project were to adapt the standard components of the power manipulator to the non-standard type of gripper to have 180 deg. tilting of the drum and a handling capacity of 1200 kg in the whole working range. The new manipulator fits to the old rails and is mountable in a hot cell with restricted access and can operate with the other A1000 manipulator which is located in the cell. The result is a system with no external wiring, maintenance-free and easy to decontaminate. Other features include a 5 t auxiliary hoist on additional and parallel carriages, emergency drives for bridge and carriage, emergency drive for telescope turn movement and emergency lifting unit for telescope. A tilt and pan holder for camera on the telescope and external mechanical emergency drives on the gripper were also essential. This paper will address the complexity, challenges and engineering ingenuity required to replace very old and obsolete equipment with a state-of-the-art system within very limited physical space and within a high radiation environment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Treatment of Foreign Radioactive Waste at the BELGOPROCESS Plant - 19345

Belgium has used a large number of nuclear technologies during the last 60 years. Power generation, reprocessing, fuel fabrication, isotope production and research activities have produced a large variety of radioactive waste streams. BELGOPROCESS is the operator of the centralised waste treatment facilities located in the Campine region in Flanders. Over the years BELGOPROCESS has developed the know-how and facilities to treat each one of these waste streams. BELGOPROCESS is a subsidiary of NIRAS, the governmental institution responsible for the safe management of radioactive waste and enriched fissile materials in Belgium. A number of these waste streams are only produced during a short period of time. After processing the existing stockpile the treatment facility is put into operational standby and eventually prepared for decommissioning. In order to treat the stockpile of some types of legacy waste within an acceptable time frame, the treatment facilities needed to be designed at a certain treatment capacity. Since the majority of the legacy waste is processed nowadays, a significant amount of treatment capacity becomes available. In June 2006 the Belgian government decided that this know-how and facilities should become available to foreign waste producers. This would allow BELGOPROCESS to fill up the available capacity of its facilities and consequently lower the cost for the Belgian waste producers. Nowadays two facilities are open to accept foreign radioactive waste. The CILVA-facility can be used for sorting, cutting, incineration, precompaction, supercompaction and cementation of low level solid waste. The PAMELA-facility - a former vitrification plant - can be used for the treatment of medium level and alpha-bearing waste. In this paper we will discuss the technical characteristics of the CILVA-incinerator and a showcase for the treatment of foreign waste at our facilities. In 2016 BELGOPROCESS started a cooperation with MATE-FIN for the incineration of low level burnable waste from the Cernavoda NPP in Romania. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Scientists and Reporters Can be Friends - 19509

The dialogue between scientists and journalists has never been more needed than it is today. Today, science must struggle to survive in the public discourse. In an always-on culture dominated by crowdsourcing, 144-character news alerts and shrinking newsrooms, technical details get distorted and lost. In the context of environmental remediation, audiences must sort out complicated relationships among government sponsors, contractors, regulators and local citizens. Journalism is being redefined. Media literacy, an approach to how we understand the role of media in society, is an emerging discipline that offers essential skills of inquiry and critical reflection on information sources. In addition, new tools exist for scientific professionals and consumers alike to access, analyze, engage with media more effectively. (authors)

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2020

Start-up of Silo 130 Waste Retrieval at La Hague: first Step Towards Reducing Legacy Inventory - 20020

On June 25, 2019, the first grapple of waste and debris was lifted from Silo 130, one of the most challenging legacy waste storage silos at La Hague. This was the achievement of more than ten years of studies and efforts focused on solving some very unique technical and safety challenges, and on designing an innovative, efficient solution. The waste is from de-cladding materials from past Gas-Cooled Reactor fuel reprocessing operations. It is an unsorted mixture of magnesium cladding pieces, graphite debris, and various other metallic waste types. These materials can be chemically reactive and therefore need specific dispositions for handling and storing. The building is more than 40 years old and does not meet modern standards. French safety authorities have required the silo to be emptied. After about three years of operation, the bulk of this waste will be removed and placed in safe storage, pending the selection of a final conditioning solution. Removal of bottom debris will then be possible. When finished, this operation will bring a conclusion to a significant legacy-related hazard on the site. The silo will then be available for final cleaning and de-activation. This paper will describe the technical, safety, and economical challenges, and the various decisions and optimizations that led to the definition of the process and technology to be implemented. Several innovative features were developed and implemented, in all sections of the project: project organization, progressive approach for the waste disposition strategy, light building design, customized and robust retrieval technology, processing technologies involving the most modern robotic and sorting techniques, storage method... Several of these first-of-a-kind innovative features have been developed and qualified specifically for this application, using the detailed qualification procedure specified for all La Hague projects. The facility was built in less than five years, overcoming various difficulties along the line. Commissioning is now finished with the combined efforts of the project, engineering, start-up, and operating teams assisted by dedicated suppliers. The facility is now ramping-up. The paper will also report on the commissioning and start-up of the facility and describe the first operational results. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

In-Can Incineration and Vitrification Process for the Treatment of Transuranic Wastes - 20035

Technological alpha contaminated wastes are produced by the nuclear fuel cycle management industry, essentially from MOX fuel production units. These Plutonium Contaminated Materials (PCM) contain a mixture of organic, metal and mineral materials, contaminated with uranium, plutonium and americium. One treatment scenario under study is to incinerate the organic materials, melt the metallic fraction and incorporate the mineral fraction (including ashes from organics incineration) into a glass matrix without sorting or pretreatment (grinding for instance). A scale 1 pilot of this PIVIC process (Process for Incineration and Vitrification In Can) has been commissioned in 2018 at the CEA R and D vitrification facility in Marcoule site. A R and D program aiming to demonstrate the feasibility of this process is currently on going. This paper starts with a description of PIVIC process with explanation of the technologies involved. Then, main results of the first year of operation with the technological demonstration goal are presented. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

An Experimental Feasibility Study on Applying Neutron Tomography to Encapsulated Spent Nuclear Fuel - 20050

Visual inspection makes easier to ensure the integrity and safety of spent nuclear fuel (SNF) than any classical techniques. Various classical techniques have been applied but there are no reliable methods to qualitatively and quantitatively verify spent fuel in dry storage. Thus, the present authors have developed the prototype safeguards apparatus for dry storage employing the array of He-4 gas scintillation detectors (S670E, Arktis Radiation Detectors Ltd., Switzerland), newly designed to simultaneously measure thermal and fast neutrons without any moderators. The S670E detector has a cylindrical shape with a diameter of 52 mm and active length of 600 mm (total length: 875 mm). The detector is filled by He-4 gas with an approximate pressure of 180 bar for fast neutron detection, and its inner wall is coated by Li-6 for thermal neutron detection. The scintillation lights generated via Li-6 nuclear reaction and elastic scattering are collected by 24 SiPMs linearly paired at the center of the detector. The detector delivers a TTL (Transistor-Transistor Logic) output for pulse readout and UART (Universal Asynchronous Receiver Transmitter) for device control. In order to assess feasibility of the apparatus, an experimental system has been designed, built, and optimized via computational studies. Cf-252 neutron sources and linearly arrayed detectors, working as a single detector, were occupied for this study due to the difficulties in working with SNF. The laboratory scale cask (diameter: 0.67 m, height: 1.5 m), minimized by a factor of 10 compared to the actual thickness of a commercial TN-32 cask, was also manufactured. The detector array was designed to rotate the lab-scale cask and obtain 36 image profiles at every 10 degrees. All profiles were aligned in single frame image called a sinogram, and the cross-sectional image was then fabricated by the inverse radon transform algorithm. These experiments have been repeated with different configurations and numbers of sources. Some gamma-ray sources were also measured with neutron sources in order to distinguish between neutron and gamma-ray pulses. Basically, a He-4 detector is designed to run on Linux OS so it is difficult to directly apply to Windows-based equipment widely used in S. Korea. Therefore, a new data acquisition board working on Windows OS was designed and built. The board mainly consists of FPGA (Field Programmable Gate Array) and SoC (System on Chip) for TTL pulse readout, sorting measured data, and transferring data to a user interface. In conclusion, the tomographic system at lab-scale has shown considerable potential to detect a partial or gross defect of encapsulated assemblies in dry storage. Next steps of this study will be to 1) repeatedly carry out experiments to demonstrate scientific reliability and validity, and 2) numerically integrate signals with weight factors to enhance the image quality since the suggested system based on passive interrogation method requires longer measurement time. Finally, the system will apply to a commercial dry storage phased out soon in S. Korea. (authors)

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

In-Situ Approach to Sampling and Survey for Radiological Contaminants to Release Overburden Soil for Reuse - 20120

Various methods may be utilized to determine if overburden soil meets approved release criteria to allow for reuse of overburden soil as backfill material: soil scanning and sorting equipment, survey and sampling of excavated soil, in-situ sampling, and utilization of box or truck counters are common approaches. This paper focuses on a modified approach using elements of in-situ sampling and after excavation survey for a large volume of overburden soil that was expected to meet soil release criteria. This approach was utilized for the U.S. Army Corps of Engineers (USACE) St. Louis District at a North St. Louis County property. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Optimization of the Post-Operational Phase on Two Belgian Multi-Unit Nuclear Power Plants: the Case of the Non-Fissile Irradiated Core Items - 20156

The current legal framework in Belgium foresees the progressive phase out of nuclear power between October 2022 (Doel 3) and December 2025 (Doel 2). Upon its definitive shutdown, each unit of the Tihange and Doel sites will enter a Post-Operational Phase (POP) and be prepared for its Decontamination and Decommissioning (D and D). Prior to obtaining the D and D license, the Operator Electrabel is legally required to remove any non-fissile irradiated core items stored in the deactivation pools. The non-fissile irradiated core items consist essentially of control rods, poison rods and source thimbles as well as thimble plugs and foreign materials irradiated during operation: - Their significant content in highly radiant radionuclides (up to 6 TBq of Co-60 per kg of irradiated material) renders all existing operational waste management processes inadequate due to insufficient biological shielding; - Their high concentrations in long-lived radionuclides call for their disposal in a geological repository for which no final design nor waste acceptance criteria are expected prior to 2050. Uncertainties in the Belgian energy supply and security, however, require the Operator to be prepared for a partial nuclear phase out, where one or more units would benefit from lifetime extension while the remaining units would undergo decommissioning. The present paper aims at presenting how Electrabel, in partnership with Tractebel, addressed this challenge by maximizing the use of synergies within the respective sites as well as between both sites themselves, all the while accounting for site specificities. The most recent results and state of progress of the project will be detailed and the first lessons learned will be shared. The project has been split in multiple tasks and phased as follows: - An inventory phase aimed at mapping the contents, origin, composition and history of the non-fissile irradiated core items; - A pre-characterization phase based on neutron activation models; - A waste sorting phase aimed at separating waste forms for which an evacuation route exists from those for which such route does not exist; - A feasibility phase aimed at exploring all possible scenarios for the management of non-fissile irradiated core items and identifying the optimal feasible solution for each site; - A preparation phase (currently ongoing), developing further the optimal solution and ensuring that back-up solutions are available for any foreseeable change of context (licensing issue, modification in the nuclear phase-out program, etc.) and initiating early contacts with potential subcontractors for segmentation works and cask manufacturers, as well as the Belgian regulatory body and waste management agency. This phase also foresees the investigation of destructive and non-destructive radiological measurements to support the detailed characterization of the waste forms; - A realization phase (future work). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Pruning of Discrete Dynamic Event Trees Using Density Peaks and Dynamic Time Warping

Discrete Dynamic Event Trees (DDETs) are used in probabilistic risk assessment (PRA) to determine the risk associated with complex systems, such as nuclear power plants, where accident scenarios need to be realistically modeled. One of the most challenging aspects of the DDET method is that a large number of branches are produced for each initiating event. This can result in data that is difficult to organize and time consuming to analyze. As the number of uncertain parameters increases, so does the complexity of the event tree. An event tree often has nodes that do not contribute to the overall results and predictive capabilities; therefore, we suggest a pre-pruning algorithm that can work to remove these nodes, and consequently, reduce the complexity of the tree. Sandia National Laboratories (SNL) is currently working on a two year dynamic cyber-risk informed project to assess cyber failure in a nuclear power plant. This will be achieved by coupling SNL's dynamic scheduler known as Analysis of Dynamic Accident Progression Trees (ADAPT) with MELCOR, a reactor accident simulator, and a System for Circuit Evaluation and Prediction of Transient Radiation Effects (SCEPTRE), a cyber Emulytics code. This paper will discuss the preliminary results of a feasibility study for using density peaks (DP) clustering with dynamic time warping (DTW) to prune branches that are formed from large DDETs, like the ones that will be produced throughout SNL's project. Papers from the project that are submitted to this conference discuss the following: - The MELCOR model for a Pressurized Water Reactor that uses a digital instrumentation and control system. - Proposed generic cyber exploits for the above reactor. - Modifications to ADAPT to extend the framework for multiple simulators, incorporate importance measures into DDET analysis, as well as sort and reduce DDETs based on inputs to or outputs from the tree. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2016

Preliminary Cyber-Informed Dynamic Branch Conditions for Analysis with the Dynamic Simplified Cyber MELCOR Model

Instrumentation and control of nuclear power is transforming from analog to modern digital assets. These control systems perform key safety and security functions. This transformation is occurring in new plant designs as well as in the existing fleet of plants as the operation of those plants is extended to 60 years. This transformation introduces new and unknown exploits involving both digital asset induced safety issues and security exploits. Traditional the open literature of nuclear power risk assessment tools and cyber security assessment methods have not been modified or developed to address the unique nature of cyber failure modes and of cyber security threats. Starting in 2015, Sandia National Laboratories (SNL) embarked on a two year dynamic cyber-risk informed project to facilitate the analysis of unique cyber failure modes and the time sequencing of cyber faults, both malicious and non-malicious, and impose those cyber exploits and cyber faults onto a nuclear power plant accident sequence simulator code to assess how cyber exploits and cyber faults could interact with a plant's digital instrumentation and control (DI and C) system in the absence of digital controls. This will be achieved by coupling SNL's existing dynamic scheduler code (ADAPT), nuclear accident simulator code (MELCOR), and cyber Emulytics code (SCEPTRE) to demonstrate real-time simulation of cyber exploits and their impact on automatic DI and C responses. Studying such potential time-sequenced cyber-attacks and their risks (i.e., the associated impact and the associated degree of difficulty to achieve the attack vector) as they pertain to accident management will provide a risk informed basis for developing effective cyber security controls for nuclear power. This paper will discuss the rationale behind the proposed generic cyber exploits for an abstracted Pressurized Water Reactor that has adopted a unified DI and C System. Other papers related to this project submitted to this conference discuss: - The MELCOR model for this abstracted reactor, called the Dynamic Simplified Cyber (DSC) model, - Modifications to ADAPT to: Extend the framework for multiple simulators, Incorporation of importance measures into dynamic event tree analysis, Sort and reduce the dynamic event tree based upon inputs to or outputs from the tree, and - A feasibility study for using density based clustering methods with dynamic time wrapping to cluster and prune dynamic event trees. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2016

Distributed Temperature Sensing within a 19-pin Wire-Wrapped Fuel Bundle Model

It has always been difficult to measure local temperature and flow velocity within fuel bundle geometries because of their complex and compact layouts. High-resolution mapping of the flow field is especially challenging. High-resolution data is typically obtained using optical instruments but optical access to the interior regions of a bundle is severely limited. Velocity fields within fuel bundle models have been mapped with particle image velocimetry (PIV), an optical technique that employs lasers and cameras. Optical access to the bundle interior is obtained using transparent materials and matching the refractive index of the physical structures with that of the fluid. Testing is necessarily isothermal because refractive indices vary with temperature. However, the ultimate aim of such studies is understanding fluid dynamics and heat transfer within real reactors and so flow field mapping under nonisothermal conditions is of particular interest. Temperature fields can be mapped at high-resolution using laser-induced fluorescence (LIF). However, as an optical technique it is unsuitable for nonisothermal liquid flows. This is due to the same sort of optical distortion that restricts PIV. It is also unsuitable for opaque fluids and setups with restricted optical access. Fiber optic distributed temperature sensing (DTS) offers a high-resolution alternative that does not rely upon imaging. A single sensor can map temperature fields at resolutions far exceeding that achievable with conventional sensors such as thermocouples. Though fiber optic sensors cannot match the spatial resolution and bandwidth of LIF, they are suitable for nonisothermal and opaque flows. And though fibers are physical probes that perturb the flow, they can be strung across complex geometries to provide data in regions lacking the optical access necessary for techniques like LIF. Distributed temperature sensing has the potential to provide fuel bundle temperature data of a type that cannot be obtained with optical methods or conventional sensors. This paper reports on preliminary results of efforts to use fiber optic distributed temperature sensors in a fuel bundle model. We are conducting a feasibility study exploring implementation issues such as strain control in the mounting configuration and signal noise associated with flow-induced vibration. We describe here the setup and present preliminary data from our first phase testing with stagnant flow. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗