Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sensitivity profiles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

An analysis of the effects of N2 absorption on the O(+) 834-A emission from rocket observations

Altitude profiles of the O(+) 834-A emission, obtained from rocket observations at moderate and high solar conditions, are compared with model calculations. The model showed that when viewing the atmosphere horizontally at altitudes below the F2 layer, the 834-A intensity was virtually independent of the O(+) density. The 834-A intensity was found to be highly sensitive to the N2 absorption cross section. Comparisons with model calculations suggest that absorption by N2 is a factor of 10 lower than the currently accepted values.

Cleary, D. D.↗
NASA NTRS2000

Sensing Clouds via Spacecraft Radio Occultation Observations

The presence of clouds dramatically alters the opacity and radiative transfer within Earth's atmosphere at both short and long wavelengths. Knowledge of cloud top and base is needed to estimate the Outgoing Long wave Radiation (OLR) to space and the net radiation at the surface from a given atmospheric profile. Satellite observations are required to provide the global perspective needed for climate. Cloud top pressure can be determined to some accuracy from spaceborne radiance measurements when cloud opacities are sufficiently large and cloud top temperatures are sufficiently low to readily them from the surface. Cloud base is particularly difficult to determine from space. The relatively small sensitivity of long wavelengths must be used to penetrate the clouds while at the same time providing sufficient sensitivity to detect the cloud base. We are studying the indirect sensitivity of radio occultation observations to clouds through their impact on the refractivity structure. The tradewind inversion is an excellent example where a very sharp refractivity structure coincides with the top of the tradewind cumulus and stratus clouds. In general, any cloud with sufficient IR opacity will have large transmissivity gradient at cloud top (base) which will result in large cooling (heating) which will create a thermal inversion at cloud top (base). Both liquid and ice clouds can reach this critical opacity. The thermal inversion and sharp change in specific humidity will cause a sharp change in the refractivity gradient which can be identified in the radio occultation results, particularly the signal amplitude. The occultations yield very accurate information on the height of such features. The heating at cloud base drives convection causing the air to follow a moist adiabat within the Cloud which further helps constrain the interpretation of the observations. The upward expansion of such opaque clouds due to convection may be an important mechanism supplying moisture into the upper troposphere. We will present simulations using high resolution radiosondes from field campaigns representing the expected signatures of such features. We will also present initial results of comparisons between GPS observations and GOES-derived cloud tops to assess the utility of this concept.

Kursinski, E. R.↗
NASA NTRS2011

Massive Young Stellar Objects in the Galactic Center: Spectroscopic Identification from Spitzer/IRS Observations - 1

We present results from our spectroscopic study, using the Infrared Spectrograph (IRS) onboard the Spitzer Space Telescope, designed to identify massive young stellar objects (YSOs) in the Galactic Center (GC). Our sample of 107 YSO candidates was selected based on IRAC colors from the high spatial resolution, high sensitivity Spitzer/IRAC images in the Central Molecular Zone (CMZ), which spans the central approximately 300 pc region of the Milky Way Galaxy. We obtained IRS spectra over 5 micron to 35 micron using both high- and low-resolution IRS modules. We spectroscopically identify massive YSOs by the presence of a 15.4 micron shoulder on the absorption profile of 15 micron CO2 ice, suggestive of CO2 ice mixed with CH30H ice on grains. This 15.4 micron shoulder is clearly observed in 16 sources and possibly observed in an additional 19 sources. We show that 9 massive YSOs also reveal molecular gas-phase absorption from C02, C2H2, and/or HCN, which traces warm and dense gas in YSOs. Our results provide the first spectroscopic census of the massive YSO population in the GC. We fit YSO models to the observed spectral energy distributions and find YSO masses of 8 - 23 solar Mass, which generally agree with the masses derived from observed radio continuum emission. We find that about 50% of photometrically identified YSOs are confirmed with our spectroscopic study. This implies a preliminary star formation rate of approximately 0.07 solar mass/yr at the GC.

An, Deokkeun↗
NASA NTRS2015

Properties of Linear Contrails Detected in 2012 Northern Hemisphere MODIS Imagery

Observation of linear contrail cirrus coverage and retrieval of their optical properties are valuable data for validating atmospheric climate models that represent contrail formation explicitly. These data can reduce our uncertainty of the regional effects of contrail-generated cirrus on global radiative forcing, and thus improve our estimation of the impact of commercial aviation on climate change. We use an automated contrail detection algorithm (CDA) to determine the coverage of linear persistent contrails over the Northern Hemisphere during 2012. The contrail detection algorithm is a modified form of the Mannstein et al. (1999) method, and uses several channels from thermal infrared MODIS data to reduce the occurrence of false positive detections. A set of contrail masks of varying sensitivity is produced to define the potential range of uncertainty in contrail coverage estimated by the CDA. Global aircraft emissions waypoint data provided by FAA allow comparison of detected contrails with commercial aircraft flight tracks. A pixel-level product based on the advected flight tracks defined by the waypoint data and U-V wind component profiles from the NASA GMAO GEOS-4 reanalysis has been developed to assign a confidence of contrail detection for the contrail mask. To account for possible contrail cirrus missed by the CDA, a post-processing method based on the assumption that pixels adjacent to detected linear contrails will have radiative signatures similar to those of the detected contrails is applied to the Northern Hemisphere data. Results from several months of MODIS observations during 2012 will be presented, representing a near-global climatology of contrail coverage. Linear contrail coverage will be compared with coverage estimates determined previously from 2006 MODIS data.

Duda, David P.↗
DOE OSTI2023

In Vitro Thrombogenicity Testing of Biomaterials in a Dynamic Flow Loop: Effects of Length and Quantity of Test Samples

Abstract The results of in vitro dynamic thrombogenicity testing of biomaterials and medical devices can be significantly impacted by test conditions. To develop and standardize a robust dynamic in vitro thrombogenicity tool, the key test parameters need to be appropriately evaluated and optimized. We used a flow loop test system previously developed in our laboratory to investigate the effects of sample length and the number of samples per test loop on the thrombogenicity results. Porcine blood heparinized to a donor-specific target concentration was recirculated at room temperature through polyvinyl chloride (PVC) tubing loops containing test materials for 1 h at 200 mL/min. Four test materials (polytetrafluoroethylene (PTFE), latex, PVC, and silicone) with various thrombotic potentials in two sample lengths (12 and 18 cm) were examined. For the 12-cm long materials, two different test configurations (one and two samples per loop) were compared. Thrombogenicity was assessed through percent thrombus surface coverage, thrombus weight, and platelet count reduction in the blood. The test system was able to effectively differentiate the thrombogenicity profile of the materials (latex > silicone > PVC ≥ PTFE) at all test configurations. Increasing test sample length by 50% did not significantly impact the test results as both 12 and 18 cm sample lengths were shown to equally differentiate thrombotic potentials between the materials. The addition of a second test sample to each loop did not increase the test sensitivity and may produce confounding results, and thus a single test sample per loop is recommended.

Engineering↗
DOE OSTI2022

Fast response High Altitude Laser Optical Sensor (HALOS) for atmospheric water and temperature measurements

Advanced instrumentation and sensing methods are the key factor in the determination of many climate science research problems. In this Phase I STTR a laser-based diagnostic system for atmospheric temperature and water concentrations measurements was developed, this system, HALOS – High Altitude Laser Optical Sensor, employs a mid-infrared (MIR) quantum cascade laser (QCL) of the distributed feedback variety (DFB) powered by a 100 kHz rep rate ramp modulated current profile which enables spectral profiling. Measurements made during Phase I showed that HALOS can surpass the available hygrometers refresh rates while offering superior accuracy (<4%) from the low Frost Point (Tfrost) of -110°C to dew points (Tdew) at 35°C while being able to encompass sub ppm concentration at altitude and supersaturated conditions at ground level. Readings from HALOS include temperature sensitivity on the order of 0.2°C and absolute humidity sensitivity (AH) on the order of 0.010 μmol/m 3 (0.18 mg/m 3 ) at a data output rate exceeding 1 kHz. HALOS can be easily integrable in existing Department of Energy (DOE) or National Oceanic and Atmospheric Administration (NOAA) conventional or remote operated aircraft having either a fixed or rotary wing.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1975

A linear feedback guidance law for an Aeromaneuvering Orbit-to-Orbit Shuttle

The sensitivity of the trajectory of an Aeromaneuvering Orbit-to-Orbit Shuttle (AMOOS) to unpredictable variations in atmospheric density is shown and a compensating guidance law is developed. The sensitivity was determined using a varying atmosphere model whose statistical properties matched those of actual atmosphere data. This study showed that a compensating guidance law is crucial to the feasibility of AMOOS. Using an optimal regulator approach, a linear feedback law for bank angle was developed and checked out with the atmosphere model. This law uses the altitude profile of the trajectory to control the amount of energy dissipated within the atmosphere.

Rehder, J. J.↗
NASA NTRS1982

The energetic molecular outflow near AFGL 961 - Millimeter-wave and infrared observations

Sensitive millimeter-wave C-12O line observations and near-infrared hydrogen recombination line observations of AFGL 961 are reported and analyzed. The observations show that the high-velocity flow has a maximum extent of at least six arcmin or 1.9 pc at the distance of AFGL 961. The flow is anisotropic and the emission profiles are asymmetric in velocity. The mass of the gas involved in the flow is determined to be approximately 19 solar masses, and the kinetic energy of this gas is estimated to be about 8 x 10 to the 46th ergs. These observations are interpreted as evidence that an energetic bipolar outflow of molecular gas is occurring near AFGL 961. Comparison of infrared recombination line data, radio continuum, and CO observations shows that a strong, ionized, stellar wind would not be a sufficient force to drive the outflow. The effects of the outflow on the surrounding molecular cloud was also investigated.

Lada, C. J.↗
NASA NTRS1984

Calculations of atmospheric transmittance in the 11 micrometer window for estimating skin temperature from VISSR infrared brightness temperatures

An algorithm for calculating the atmospheric transmittance in the 10 to 20 micro m spectral band from a known temperature and dewpoint profile, and then using this transmittance to estimate the surface (skin) temperature from a VISSR observation in the 11 micro m window is presented. Parameterizations are drawn from the literature for computing the molecular absorption due to the water vapor continuum, water vapor lines, and carbon dioxide lines. The FORTRAN code is documented for this application, and the sensitivity of the derived skin temperature to variations in the model's parameters is calculated. The VISSR calibration uncertainties are identified as the largest potential source of error.

Chesters, D.↗
NASA NTRS1984

Passive microwave remote sensing of the atmosphere from satellites

Present and future satellite atmospheric sounding is discussed. Although present systems sound principally the temperature profile and the water vapor and precipitation abundances over ocean, future systems will measure other constituents such as O3, H2O2, and ClO, and will provide improved spatial resolution, retrieval accuracy, and altitude coverage for temperature and humidity. Present systems with only a few channels will be replaced by systems with 20 or more, and larger antennas with more sensitive radiometers will permit horizontal resolutions of 15 to 50 km or less, even from geosynchronous orbit. The success of imaging microwave spectrometers in penetrating clouds and in yielding uniquely accurate measurements ensure a growing role in operational and research systems for these remote sensing techniques.

Staelin, D. H.↗
NASA NTRS1990

Nimbus 7 solar backscatter ultraviolet (SBUV) ozone products user's guide

Three ozone tape products from the Solar Backscatter Ultraviolet (SBUV) experiment aboard Nimbus 7 were archived at the National Space Science Data Center. The experiment measures the fraction of incoming radiation backscattered by the Earth's atmosphere at 12 wavelengths. In-flight measurements were used to monitor changes in the instrument sensitivity. Total column ozone is derived by comparing the measurements with calculations of what would be measured for different total ozone amounts. The altitude distribution is retrieved using an optimum statistical technique for the inversion. The estimated initial error in the absolute scale for total ozone is 2 percent, with a 3 percent drift over 8 years. The profile error depends on latitude and height, smallest at 3 to 10 mbar; the drift increases with increasing altitude. Three tape products are described. The High Density SBUV (HDSBUV) tape contains the final derived products - the total ozone and the vertical ozone profile - as well as much detailed diagnostic information generated during the retrieval process. The Compressed Ozone (CPOZ) tape contains only that subset of HDSBUV information, including total ozone and ozone profiles, considered most useful for scientific studies. The Zonal Means Tape (ZMT) contains daily, weekly, monthly and quarterly averages of the derived quantities over 10 deg latitude zones.

Fleig, Albert J.↗
NASA NTRS1992

BATSE observations of gamma-ray bursts

Gamma-ray bursts are being detected with unprecedented sensitivity by the Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory since its launch in April, 1991. The experiment is detecting about one gamma-ray burst per day. A brief description is presented of the on-orbit performance of BATSE, the methods of identification of bursts, and examples of the diverse time profiles of the gamma-ray bursts observed. The most significant finding thus far is the apparent isotropy of the bursts together with the observed inhomogeneity of the sources.

Fishman, Gerald J.↗
NASA NTRS1995

Schlieren optics for leak detection

The purpose of this research was to develop an optical method of leak detection. Various modifications of schlieren optics were explored with initial emphasis on leak detection of the plumbing within the orbital maneuvering system of the space shuttle (OMS pod). The schlieren scheme envisioned for OMS pod leak detection was that of a high contrast pattern on flexible reflecting material imaged onto a negative of the same pattern. We find that the OMS pod geometry constrains the characteristic length scale of the pattern to the order of 0.001 inch. Our experiments suggest that optical modulation transfer efficiency will be very low for such patterns, which will limit the sensitivity of the technique. Optical elements which allow a negative of the scene to be reversibly recorded using light from the scene itself were explored for their potential in adaptive single-ended schlieren systems. Elements studied include photochromic glass, bacteriorhodopsin, and a transmissive liquid crystal display. The dynamics of writing and reading patterns were studied using intensity profiles from recorded images. Schlieren detection of index gradients in air was demonstrated.

Peale, Robert E.↗
NASA NTRS2003

Ozone Climatological Profiles for Version 8 TOMS and SBUV Retrievals

A new altitude dependent ozone climatology has been produced for use with the latest Total Ozone Mapping Spectrometer (TOMS) and Solar Backscatter Ultraviolet (SBUV) retrieval algorithms. The climatology consists of monthly average profiles for ten degree latitude zones covering from 0 to 60 km. The climatology was formed by combining data from SAGE II (1988 to 2000) and MLS (1991-1999) with data from balloon sondes (1988-2002). Ozone below about 20 km is based on balloons sondes, while ozone above 30 km is based on satellite measurements. The profiles join smoothly between 20 and 30 km. The ozone climatology in the southern hemisphere and tropics has been greatly enhanced in recent years by the addition of balloon sonde stations under the SHADOZ (Southern Hemisphere Additional Ozonesondes) program. A major source of error in the TOMS and SBUV retrieval of total column ozone comes from their reduced sensitivity to ozone in the lower troposphere. An accurate climatology for the retrieval a priori is important for reducing this error on the average. The new climatology follows the seasonal behavior of tropospheric ozone and reflects its hemispheric asymmetry. Comparisons of TOMS version 8 ozone with ground stations show an improvement due in part to the new climatology.

McPeters, R. D.↗
NASA NTRS2006

Numerical Issues for Circulation Control Calculations

Steady-state and time-accurate two-dimensional solutions of the compressible Reynolds-averaged Navier- Stokes equations are obtained for flow over the Lockheed circulation control (CC) airfoil and the General Aviation CC (GACC) airfoil. Numerical issues in computing circulation control flows such as the effects of grid resolution, boundary and initial conditions, and unsteadiness are addressed. For the Lockheed CC airfoil computed solutions are compared with detailed experimental data, which include velocity and Reynolds stress profiles. Three turbulence models, having either one or two transport equations, are considered. Solutions are obtained on a sequence of meshes, with mesh refinement primarily concentrated on the airfoil circular trailing edge. Several effects related to mesh refinement are identified. For example, sometimes sufficient mesh resolution can exclude nonphysical solutions, which can occur in CC airfoil calculations. Also, sensitivities of the turbulence models with mesh refinement are discussed. In the case of the GACC airfoil the focus is on the difference between steady-state and time-accurate solutions. A specific objective is to determine if there is self-excited vortex shedding from the jet slot lip.

Swanson, Roy C., Jr.↗
NASA NTRSDate not supplied

Performance Characteristics of a Boundary Layer Ingesting Inlet - Distortion Tolerant Fan Through CFD Code Coupling

A method of constructing a high-fidelity simulation using two NASA CFD codes, Launch Ascent and Vehicle Aerodynamics (LAVA), which is the general-purpose solver, and a turbomachinery specific code NASA-TURBO (TURBO), will be presented. Validation of the code coupling is performed through comparison to experimental data obtained in the 2017 wind tunnel test of NASA’s Boundary Layer Ingesting Inlet - Distortion Tolerant Fan (BLI2DTF). For the simulation, the external flow field is computed by LAVA utilizing a steady-state Reynolds-averaged Navier-Stokes (RANS) methodology. Data from LAVA is exchanged with TURBO, which simulated the propulsor utilizing an unsteady-RANS methodology. A sensitivity analysis is performed using averaged and instantaneous data transfer between the two codes, as well as varying the amount of simulation time TURBO computes between updates. The results of the coupled simulations appear to replicate the BLI2DTF experiment correctly. Static pressure taps leading into and around the nacelle, total pressure ratio and efficiency of the propulsor, and profiles of total temperature, pressure, and Mach number at the rear measurement plane, aft of the propulsor, are in good agreement with experimental data. These results provide confidence that the coupled simulation is behaving in a physically realizable manner.

CFD↗
NASA NTRSDate not supplied

Impacts from Assimilating Large Volumes of GNSS Radio Occultation (RO) Observations during ROMEX in NASA’s Global Earth Observing System

The GNSS Radio Occultation (RO) Modeling Experiment (ROMEX) seeks to quantify the benefit of the increasing quantity of RO observations available for use in operational numerical weather prediction (NWP) systems and products. ROMEX includes participation from multiple operational NWP centers and NWP models, among them are NASA’s Global Earth Observing System (GEOS) model produced and run at the Global Modeling and Assimilation Office (GMAO). The design of the numerical experiments core to ROMEX include: 1) a control model run that includes all the RO observations currently used operationally with the sole exception of those from commercial sources and 2) a ROMEX model run that adds to the control over 25 thousand additional RO profiles per day from commercial RO providers, with both experiments run over the three-month period of September through November 2022. The ROMEX model run greatly augments the relatively small subset of the currently available commercial RO profiles which have been purchased for routine use in operational NWP by the various NWP centers. While this smaller subset of commercial RO profiles currently used in operations has been shown to have a positive impact on NWP forecasts, the additional impact from the ROMEX RO dataset has yet to be determined and is the focus of ROMEX. Results from GEOS are presented, including the impact on both analyses and forecasts over the study period and statistics using the forecast sensitivity-based observation impact (FSOI) method. The impact from varying the method of quality control and specifying the observation uncertainty for RO observations within the GEOS data assimilation system is also examined.

Michael J Murphy↗
NASA NTRS1992

Numerical sensitivity analysis of passive EHF and SMMW channels to tropospheric water vapor, clouds, and precipitation

Potential uses of specific extremely High Frequency (EHF) and Sub-Millimeter-Wave (SMMW) channels at 90, 166, 183, 220, 325, 340, and 410 GHz for passive spaceborne remote sensing of the troposphere and lower stratosphere are investigated using an iterative numerical radiative transfer model. Collectively, these channels offer potential for high spatial resolution imaging using diffraction-limited apertures of practical size, along with the ability to profile water vapor, map precipitation beneath optically opaque cloud cover, and to measure nonprecipitating cloud (e.g., cirrus) parameters. A widely-spaced set of EHF and SMMW channels can yield observable degrees of freedom related to clouds and precipitation not available by exclusively using the more thoroughly studied microwave channels below 183 GHz. A new passive airborne imaging instrument for tropospheric meteorological sensing is described.

Gasiewski, A. J.↗