Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUBSTRATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Magnetization in Nanocrystalline PLD Zinc Ferrite Thin Films Deposited on Fused Quartz Substrate

The nanocrystalline zinc ferrite (ZnFe{sub 2}O{sub 4}) thin films were grown on the fused quartz substrate using pulsed laser deposition. The effects of atmospheric conditions on structural, magnetic, and morphological properties have been systematically studied using X-ray diffraction, vibrating sample magnetometry, and atomic force microscopy. The films showed textured growth of zinc ferrite for the substrate temperatures at ≥ 600 °C irrespective of the ambient environment. Interestingly, thin films of zinc ferrite showed a magnetic hysteresis loop in contrast to the paramagnetic nature of their bulk counterpart. The value of saturation magnetization (4πM{sub s}) increased from 130 to 360 G when the substrate temperature was increased from room temperature (RT) to 800 °C in the oxygen atmosphere. In the absence of oxygen pressure, the value of 4πM{sub s} is observed to be 330 G for the film deposited at RT and found to increase to a value of 670 G when the film is deposited at 400 °C and the maximum value of 2580 G is observed for the film deposited at 700 °C. However, the value of 4πM{sub s} of 800 °C dropped down to 2000 G.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of substrate temperature deposition on the thermal and optical performance of ZnO thin films as thermal interface material

ZnO thin films were deposited onto aluminium substrates at different substrate temperatures from 300 to 450 °C by chemical vapour deposition method using zinc acetate dihydrate as precursor. The effects of substrate temperatures on the thermal and optical performances of a light emitting diode package were investigated. The thermal transients show that thin film deposited at 400 °C has the lowest thermal resistance and junction temperature with a different difference of 1.3421 K/W and 2.7 °C respectively. The correlated colour temperature of the LED interfaced with ZnO prepared at 400 °C showed a good agreement with the thermal performance and exhibited the lowest correlated colour temperature as the driving current increases. The luminance shows that bare Al demonstrate the lowest luminosity compare to the coated thin film as TIM. The excess heat that trapped within the air gaps affects the heat flow. This eventually affects the luminosity of the LED. Furthermore, the AFM measurements of CVD 3 (400 °C) samples show low roughness values which contribute to good thermal resistance and junction temperature values. Overall, the present study shows that the performance of the LED has been enhanced with ZnO thin film used as TIM.

36 MATERIALS SCIENCE↗

Controlling substrate temperature with infrared heating to improve mechanical properties of large-scale printed parts

Additively manufactured parts made with polymer extrusion techniques can be 50-75% weaker in the z-direction (across layers) than in the x- and y-directions. This has been attributed to poor mobility of polymer chains and a low degree of entanglement across a cold deposition interface. This is particularly a challenge when printing large-scale parts, such as with the Big Area Additive Manufacturing (BAAM) system, because layer times can exceed several minutes. The current work presents a method for controlling the temperature of the substrate material on the BAAM just prior to deposition using infrared heating lamps. Additionally, long layer times were simulated by actively cooling the material following deposition of each layer. The effect of substrate temperature on the z-direction mechanical properties of 20% carbon fiber reinforced acrylonitrile butadiene styrene (ABS) was measured for an initial temperature ranging from 50 °C to 150 °C and a preheated temperature ranging from 150 °C to 220 °C. Infrared preheating proved to be very effective when applied to substrates that had cooled considerably, almost doubling the tensile strength and increasing the fracture toughness by a factor of 7x.

36 MATERIALS SCIENCE↗

Growth of epitaxial CdTe thin films on amorphous substrates using single crystal graphene buffer

Traditionally, a high-quality CdTe film can only be grown on a single crystal substrate with a small lattice mismatch. We report the epitaxy of CdTe films on monolayer single crystal graphene buffered amorphous SiO 2 /Si(100) substrates, despite a 86% lattice mismatch between CdTe(111) and graphene. X-ray pole figure, electron backscatter diffraction mapping and transmission electron microscopy all confirm that the epitaxial CdTe films are composed of two domains: the primary and the Σ3 twin. The crystal quality of films is shown to improve as the post-deposition annealing temperature increases. However, the rotational misalignment in CdTe remains large even after annealing. Through density functional theory calculations on the charge transfer distribution at the interface of CdTe and graphene, it is found that the interface is dominated by the weak van der Waals interaction, which explains the large spread of in-plane orientation in CdTe films. Furthermore, the rotational misalignment in graphene itself is also confirmed to produce the large in-plane orientation spread in CdTe films. Although imperfect in epitaxy quality, this work demonstrates that monolayer single crystal graphene can buffer amorphous substrates for growing epitaxial films, and hence hints an opportunity for developing advanced thin film devices using graphene as a template.

36 MATERIALS SCIENCE↗

Effects of substrate bias and tilt on magnetron sputtered boron carbide films

Maintaining high density and good mechanical properties at oblique angles for magnetron sputtered amorphous boron carbide films remains a challenge. In this study, we investigate the effect of the substrate bias on density, residual stress, mechanical properties, and morphology of boron carbide films deposited via direct current magnetron sputtering with a full-face erosion magnetron source in a mixed Ar-Ne plasma. Results show that films deposited at oblique substrate tilt angles on substrates biased at -50 V possess significantly lower oxygen content, superior mechanical properties, and higher density compared to their electrically grounded counterparts. In conclusion, these enhancements observed at oblique angles, while promising, come at the cost of larger residual compressive stress and higher Ne incorporation in films.

Materials science↗

Single- and dual-variant atomic ordering in GaAsP compositionally graded buffers on GaP and Si substrates

Here, we investigate the material properties of GaAsP graded buffers on both GaP and Si substrates in order to determine limitations to dislocation glide in GaAsP. Phase separation is not observed in these GaAsP buffers, but CuPt B atomic ordering is present, and has an impact on the Burgers vector distribution of gliding dislocations. Tellurium surfactant eliminates ordering in GaAsP, allowing control over the glide plane distribution while highlighting the importance of the growth surface and choice of dopant. The impact of single-variant CuPtB ordering of GaAsP buffers grown on GaP substrates is investigated by monitoring the threading dislocation density throughout the buffer in sequential steps. The dislocation density rises steadily throughout the graded buffer, implying that factors other than ordering-induced glide plane switches play a dominant role in the final dislocation density. We observe an increase in surface roughness throughout the buffer and speculate that a dislocation nucleation source on the surface has a low activation energy and may lead to increased threading dislocation density. On Si substrates, the GaAsP buffer displays dual-variant CuPt B ordering rather than single-variant ordering due to the surface step geometry. We discuss how dual-variant ordering leads to a variable glide force, and thus has a different impact on dislocation dynamics than single-variant ordering. Because the III-V on Si nucleation procedure determines the step geometry, it also influences the dislocation dynamics.

36 MATERIALS SCIENCE↗

CO as a substrate and inhibitor of H + reduction for the Mo-, V-, and Fe-nitrogenase isozymes

Three known nitrogenase isozymes, Mo-, V-, and Fe-, catalyze biological reduction of dinitrogen (N 2 ) to ammonia (NH 3 ). All three utilize the same reductive elimination mechanism: an intermediate with two metal-bound hydrides reductively-eliminates hydrogen gas (H 2 ) in a reaction coupled to binding and activation of N 2 . Nonetheless, the three isozymes show dramatically different relative rates of H 2 formation and N 2 reduction, revealing important differences in reactivity with substrates. Carbon monoxide (CO) has been characterized as both an inhibitor and substrate for Mo- and V-nitrogenases, but not for the Fe-nitrogenase. In this work, we present a comparative study of the reactivity of the three isozymes with CO, examining CO both as a substrate and as an inhibitor of proton (H + ) reduction under steady-state conditions. For Mo-nitrogenase, there is neither detectable reduction of CO nor inhibition of H + reduction. Fe- and V-nitrogenase show CO reduction and inhibition of H + reduction that depends on the CO partial pressure. For V-nitrogenase, ethylene (C 2 H 4 ) is the major reduction product with a maximum specific activity of ~7.5 nmol C 2 H 4 /nmol VFe protein/min at 1 atm CO. The major product of CO reduction for Fe-nitrogenase is methane (CH 4 ) with a maximum specific activity of ~4.8 nmol CH 4 /nmol FeFe protein/min at 0.05 atm CO. The rate of CH 4 production by Fe-nitrogenase progressively increases to a maximum at 0.05 atm CO and then declines to ~10% with increasing CO partial pressure up to 1 atm. CO does not inhibit proton reduction in Mo-nitrogenase but shows 16% inhibition for V-nitrogenase and 35% for Fe-nitrogenase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of Human GIVD Cytosolic Phospholipase A2 Reveals Insights into Substrate Recognition

Cytosolic phospholipases A2 (cPLA2s) consist of a family of calcium-sensitive enzymes that function to generate lipid second messengers through hydrolysis of membrane-associated glycerophospholipids. The GIVD cPLA2 (cPLA2δ) is a potential drug target for developing a selective therapeutic agent for the treatment of psoriasis. Here, we present two X-ray structures of human cPLA2δ, capturing an apo state, and in complex with a substrate-like inhibitor. Comparison of the apo and inhibitor-bound structures reveals conformational changes in a flexible cap that allows the substrate to access the relatively buried active site, providing new insight into the mechanism for substrate recognition. The cPLA2δ structure reveals an unexpected second C2 domain that was previously unrecognized from sequence alignments, placing cPLA2δ into the class of membrane-associated proteins that contain a tandem pair of C2 domains. Furthermore, our structures elucidate novel inter-domain interactions and define three potential calcium-binding sites that are likely important for regulation and activation of enzymatic activity. These findings provide novel insights into the molecular mechanisms governing cPLA2's function in signal transduction.

59 BASIC BIOLOGICAL SCIENCES↗

Rational design of a carboxylic esterase Rh Est1 based on computational analysis of substrate binding

A new carboxylic esterase RhEst1 which catalyzes the hydrolysis of (S)-(+)-2,2-dimethylcyclopropanecarboxylate (S-DmCpCe), the key chiral building block of cilastatin, was identified and subsequently crystallized in our previous work. Mutant Rh Est 1A147I/V148F/G254A was found to show a 5-fold increase in the catalytic activity. In this work, molecular dynamic simulations were performed to elucidate the molecular determinant of the enzyme activity. Our simulations show that the substrate binds much more strongly in the A147I/V148F/G254A mutant than in wild type, with more hydrogen bonds formed between the substrate and the catalytic triad and the oxyanion hole. The OH group of the catalytic residue Ser101 in the mutant is better positioned to initiate the nucleophilic attack on S-DmCpCe. Interestingly, the "170-179" loop which is involved in shaping the catalytic sites and facilitating the product release shows remarkable dynamic differences in the two systems. Based on the simulation results, six residues were identified as potential "hot-spots" for further experimental testing. Consequently, the G126S and R133L mutants show higher catalytic efficiency as compared with the wild type. In conclusion, this work provides molecular-level insights into the substrate binding mechanism of carboxylic esterase Rh Est1, facilitating future experimental efforts toward developing more efficient Rh Est1 variants for industrial applications.

59 BASIC BIOLOGICAL SCIENCES↗

Spin canting of Ni/CoO/Fe films grown on curved MgO(0 0 1) substrate

Using element-resolved x-ray magnetic circular dichroism (XMCD) and x-ray magnetic linear dichroism (XMLD) measurements, we determined the spin orientations of Ni, CoO and Fe films in Ni/CoO/Fe films grown on a curved MgO(0 0 1) substrate. We find that the vicinal surface of MgO(0 0 1) substrate results in a spin canting towards out-of-plane direction in the Ni and CoO films as a result of the interfacial coupling. The Ni spin canting angle increases monotonically with the vicinal angle in the studied range of 0–17° and the CoO spin canting angle increases more rapidly towards saturation only at a few degrees of the vicinal angle. The uniaxial magnetic anisotropy induced in the Ni layer by the Ni/CoO interfacial coupling is quantitatively determined and is shown to increase monotonically with the vicinal angle. Our result provides a new pathway for tailoring the spin orientation by modifying the substrate surface symmetry in combining with the ferromagnetic/antiferromagnetic interfacial interaction in thin-film based spintronic devices.

36 MATERIALS SCIENCE↗

Thermal stability of Li films on polycrystalline molybdenum substrates

Lithium (Li) coatings on plasma facing components (PFCs) have been proposed as potential solutions to first wall and divertor challenges in tokamak fusion reactors. We report on the thermal behavior of ultrathin pure Li films deposited on polycrystalline substrates of molybdenum (Mo) and a molybdenum alloy (titanium zirconium molybdenum, TZM). These Li films were studied under controlled ultrahigh vacuum (UHV) conditions and thermal stabilities were primarily compared via temperature programmed desorption (TPD) measurements. In addition, on TZM, which is of particular interest, we obtained additional spectroscopic data using Auger electron spectroscopy (AES) and low energy ion scattering (LEIS) to further characterize the film structure and composition. Here, the monolayer of Li in these films in contact with the substrate is bound much stronger than in bulk Li films, and thermally desorbs at much higher temperatures. Interfacial Li on Mo(poly) has a higher thermal stability than that on TZM(poly), where the limiting values for the desorption activation energies, E d , are 3.56 and 2.84 eV, respectively, in the low coverage, high temperature desorption tail. LEIS indicates some clustering or interdiffusion of the Li films on the TZM substrate at 500 K. No appreciable irreversible absorption of Li occurs on Mo or TZM under the conditions of these experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Decoupling the effects of substrate hardness and roughness upon particle adhesion in cold spray

There are two stages of particle adhesion relevant to cold spray: adhesion of the first layer to the substrate, followed by inter-particle adhesion during subsequent deposition. In this work we study the second of these, in which particles strike a previously-deposited layer that is roughened and hardened by prior particle impacts. Specifically, we decouple the effects of surface roughness and hardness on particle adhesion for copper-on-copper impacts. We measure changes to the critical velocity, V cr , in single particle impacts produced by the Laser Induced Particle Impact Test on several surfaces including a cold sprayed surface and a polished version of that surface. We find that increases in both substrate roughness and hardness suppress particle adhesion to higher velocities, indeed in rather equal proportion by ∼10–15% each. This suggests that there is a higher V cr associated with coating build-up (particle-particle bonding) that is overall ∼30% higher than V cr for particle-substrate adhesion.

36 MATERIALS SCIENCE↗

Quantitative soil zymography: Mechanisms, processes of substrate and enzyme diffusion in porous media

Soil membrane zymography enables 2D mapping of enzyme activities on the surface of soil samples. The method is according to diffusion of components of enzymatically-mediated reactions to/from membrane, and, hence, reflects the distribution of enzyme activities at the intact soil surface. Zymography has been already successfully implemented in numerous soil ecology applications. Here we identify two methodological aspects for further improvement and expansion of the method at micro and macro scales: first, accounting for the area of contact between the soil surface and the zymography membranes and, second, accounting for diffusion effects during the zymography procedure. We tested three methods, namely, laser-scanning, staining with a fluorescent product (e.g. MUF: 4-methylumbelliferone), and X-ray computed micro-tomography, for assessing the area of the soil surface in contact with the membranes. We quantified diffusion of MUF, enzymes and substrate between the substrate-saturated membrane and soil as well as diffusion processes during membrane zymography via HP2 software. Diffusion of the substrate from the membrane and of the MUF-product to the membrane was detected, while there were no clear evidence of enzyme diffusion to/in the membrane. According to the model simulations, the enzyme activities detected via 2D zymography probably represent only a small portion, about 20%, of the actual reactions within the soil volume that is in both direct contact and in hydrological contact with zymography membranes. This is a result of omnidirectional diffusion of reaction products. The membrane contact with the soil surface estimated by three methods ranged from 3.4 to 36.5% further signifying that only a fraction of enzymes activity is detectable in a course of 2D soil zymography.

59 BASIC BIOLOGICAL SCIENCES↗

Analysis of current-driven oscillatory dynamics of single-layer homoepitaxial islands on crystalline conducting substrates

Here we report results of a systematic study on the complex oscillatory current-driven dynamics of single-layer homoepitaxial islands on crystalline substrate surfaces and the dependence of this driven dynamical behavior on important physical parameters, including island size, substrate surface orientation, and direction of externally applied electric field. The analysis is based on a nonlinear model of driven island edge morphological evolution that accounts for curvature-driven edge diffusion, edge electromigration, and edge diffusional anisotropy. Using a linear theory of island edge morphological stability, we calculate a critical island size at which the island’s equilibrium edge shape becomes unstable, which sets a lower bound for the onset of time-periodic oscillatory dynamical response. Using direct dynamical simulations, we study the edge morphological dynamics of current-driven single-layer islands at larger-than-critical size, and determine the actual island size at which the migrating islands undergo a transition from steady to time-periodic asymptotic states through a subcritical Hopf bifurcation. At the highest symmetry of diffusional anisotropy examined, on {111} surfaces of face-centered cubic crystalline substrates, we find that more complex stable oscillatory states can be reached through period-doubling bifurcation at island sizes larger than those at the Hopf points. We characterize in detail the island morphology and dynamical response at the stable time-periodic asymptotic states, determine the range of stability of these oscillatory states terminated by island breakup, and explain the morphological features of the stable oscillating islands on the basis of linear stability theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Differential contribution of key metabolic substrates and cellular oxygen in HIF signalling

Changes in availability and utilisation of O{sub 2} and metabolic substrates are common in ischemia and cancer. We examined effects of substrate deprivation on HIF signalling in PC12 cells exposed to different atmospheric O{sub 2}. Upon 2–4 h moderate hypoxia, HIF-α protein levels were dictated by the availability of glutamine and glucose, essential for deep cell deoxygenation and glycolytic ATP flux. Nuclear accumulation of HIF-1α dramatically decreased upon inhibition of glutaminolysis or glutamine deprivation. Elevation of HIF-2α levels was transcription-independent and associated with the activation of Akt and Erk1/2. Upon 2 h anoxia, HIF-2α levels strongly correlated with cellular ATP, produced exclusively via glycolysis. Without glucose, HIF signalling was suppressed, giving way to other regulators of cell adaptation to energy crisis, e.g. AMPK. Consequently, viability of cells deprived of O{sub 2} and glucose decreased upon inhibition of AMPK with dorsomorphin. The capacity of cells to accumulate HIF-2α decreased after 24 h glucose deprivation. This effect, associated with increased AMPKα phosphorylation, was sensitive to dorsomorphin. In chronically hypoxic cells, glutamine played no major role in HIF-2α accumulation, which became mainly glucose-dependent. Overall, the availability of O{sub 2} and metabolic substrates intricately regulates HIF signalling by affecting cell oxygenation, ATP levels and pathways involved in production of HIF-α. - Highlights: • Gln and Glc regulate HIF levels in hypoxic cells by maintaining low O{sub 2} and high ATP. • HIF-α levels under anoxia correlate with cellular ATP and critically depend on Glc. • Gln and Glc modulate activity of Akt, Erk and AMPK, regulating HIF production. • HIF signalling is differentially inhibited by prolonged Glc and Gln deprivation. • Unlike Glc, Gln plays no major role in HIF signalling in chronically hypoxic cells.

60 APPLIED LIFE SCIENCES↗

Assessing the impact of substrate-level enzyme regulations limiting ethanol titer in Clostridium thermocellum using a core kinetic model

Clostridium thermocellum is a promising candidate for consolidated bioprocessing because it can directly ferment cellulose to ethanol. Despite significant efforts, achieved yields and titers fall below industrially relevant targets. This implies that there still exist unknown enzymatic, regulatory, and/or possibly thermodynamic bottlenecks that can throttle back metabolic flow. By (i) elucidating internal metabolic fluxes in wild-type C. thermocellum grown on cellobiose via 13 C-metabolic flux analysis ( 13 C-MFA), (ii) parameterizing a core kinetic model, and (iii) subsequently deploying an ensemble-docking workflow for discovering substrate-level regulations, this paper aims to reveal some of these factors and expand our knowledgebase governing C. thermocellum metabolism. Generated 13 C labeling data were used with 13 C-MFA to generate a wild-type flux distribution for the metabolic network. Notably, flux elucidation through MFA alluded to serine generation via the mercaptopyruvate pathway. Using the elucidated flux distributions in conjunction with batch fermentation process yield data for various mutant strains, we constructed a kinetic model of C. thermocellum core metabolism (i.e. k-ctherm138). Subsequently, we used the parameterized kinetic model to explore the effect of removing substrate-level regulations on ethanol yield and titer. Upon exploring all possible simultaneous (up to four) regulation removals we identified combinations that lead to many-fold model predicted improvement in ethanol titer. In addition, by coupling a systematic method for identifying putative competitive inhibitory mechanisms using K-FIT kinetic parameterization with the ensemble-docking workflow, we flagged 67 putative substrate-level inhibition mechanisms across central carbon metabolism supported by both kinetic formalism and docking analysis.

59 BASIC BIOLOGICAL SCIENCES↗

Structures of Pseudomonas aeruginosa LpxA Reveal the Basis for Its Substrate Selectivity

In Gram-negative bacteria, the first step of lipid A biosynthesis is catalyzed by UDP-N-acetylglucosamine acyltransferase (LpxA) through the transfer of a R-3-hydroxyacyl chain from the acyl carrier protein (ACP) to the 3-hydroxyl group of UDP-GlcNAc. Previous studies suggest that LpxA is a critical determinant of the acyl chain length found in lipid A, which varies among species of bacteria. In Escherichia coli and Leptospira interrogans, LpxA prefers to incorporate longer R-3-hydroxyacyl chains (C14 and C12, respectively), whereas in Pseudomonas aeruginosa, the enzyme is selective for R-3-hydroxydecanoyl, a 10-hydrocarbon long acyl chain. We now report three P. aeruginosa LpxA crystal structures: apo protein, substrate complex with UDP-GlcNAc, and product complex with UDP-3-O-(R-3-hydroxydecanoyl)-GlcNAc. A comparison between the apo form and complexes identifies key residues that position UDP-GlcNAc appropriately for catalysis and supports the role of catalytic His121 in activating the UDP-GlcNAc 3-hydroxyl group for nucleophilic attack during the reaction. Here, the product-complex structure, for the first time, offers structural insights into how Met169 serves to constrain the length of the acyl chain and thus functions as the so-called hydrocarbon ruler. Furthermore, compared with ortholog LpxA structures, the purported oxyanion hole, formed by the backbone amide group of Gly139, displays a different conformation in P. aeruginosa LpxA, which suggests flexibility of this structural feature important for catalysis and the potential need for substrate-induced conformational change in catalysis. Taken together, the three structures provide valuable insights into P. aeruginosa LpxA catalysis and substrate specificity as well as templates for future inhibitor discovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Substrate Promotes Productive Gas Binding in the α-Ketoglutarate-Dependent Oxygenase FIH

The Fe 2+ /α-ketoglutarate (αKG)-dependent oxygenases use molecular oxygen to conduct a wide variety of reactions with important biological implications, such as DNA base excision repair, histone demethylation, and the cellular hypoxia response. These enzymes follow a sequential mechanism in which O 2 binds and reacts after the primary substrate binds, making those structural factors that promote productive O 2 binding central to their chemistry. A large challenge in this field is to identify strategies that engender productive turnover. Factor inhibiting HIF (FIH) is a Fe 2+ /αKG-dependent oxygenase that forms part of the O 2 sensing machinery in human cells by hydroxylating the C-terminal transactivation domain (CTAD) found within the HIF-1α protein. In this work, the structure of FIH was determined with the O 2 analogue NO bound to Fe, offering the first direct insight into the gas binding geometry in this enzyme. Through a combination of density functional theory calculations, {FeNO} 7 electron paramagnetic resonance spectroscopy, and ultraviolet–visible absorption spectroscopy, we demonstrate that CTAD binding stimulates O 2 reactivity by altering the orientation of the bound gas molecule. Although unliganded FIH binds NO with moderate affinity, the bound gas can adopt either of two orientations with similar stability; upon CTAD binding, NO adopts a single preferred orientation that is appropriate for supporting oxidative decarboxylation. Combined with other studies of related enzymes, our data suggest that substrate-induced reorientation of bound O 2 is the mechanism utilized by the αKG oxygenases to tightly couple O 2 activation to substrate hydroxylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗