Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “START Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

XMM-Newton observations of CYGNUS X-1

Observations of Cygnus X-1 were first attempted under this program in the spring of 2004, but were complicated by instrumental flaring problems. Successful observations were completed in the fall of 2004, and processed data were delivered to the PI in the winter and spring of 2005. Thus, focused work on this data was only possible starting in 2005. A preliminary reduction and analysis of data from the EPIC CCD cameras and the Reflection Grating Spectrometer has been made. The EPIC spectra reveal the best example of a broadened, relativistic iron emission line yet found in Cygnus X-1. The Oxygen K-shell region has been shown to be a very complex wavelength range in numerous spectra of accreting sources, but the RGS spectra reveal this region in great detail and will be important in understanding the wind from the 0-type donor star that is focused onto the black hole in Cygnus X-1.

Mushotzky, Richard F.↗
NASA NTRSDate not supplied

Assessment of the Fluid Network for the Effusion Holes in a RQL (Rich-burn, Quick-quench, Lean-burn) Gas Turbine Combustor

The transient processes involving lean blowout (LBO) in a RQL combustor such as the single cup combustor in the National Jet Fuels Combustion Program (NJFCP) referee rig are simulated with the reduced mechanisms based on Hybrid Chemistry for three different fuels, A2, C1 and C4. Experiments conducted in the NJFCP referee rig established a stable flame at a global equivalence ratio of 0.096 (the near LBO condition) as the starting condition for LBO tests performed with all A and C fuels. Simulations of the approach to LBO verify that a stable flame is established at the near-LBO condition for each fuel before reducing fuel flow rate (and thus equivalence ratio) in a stepwise manner. Main conclusions are: (1) For A2 fuel the equivalence ratio for LBO is 0.081 (2) For C1 fuel the equivalence ratio for LBO is 0.087 or 0.085depended on different step-down transition paths. (3) For C4 fuel the equivalence ratio for LBO is 0.087 or 0.084 depended on types of mesh or boundary conditions. (4) The fuel relative difference from LES on LBO for C1 fuel relative to A2 fuel is 7.40% or 4.94% versus 7.83% from the experimental data. (5) The fuel relative difference from LES on LBO for C4 fuel relative to A2 is 6.17% or 7.69% versus 5.21% from the experimental data

Lean blow out↗
NASA NTRSDate not supplied

Assessment of the Fluid Network for the Effusion Holes in a RQL (Rich-burn, Quick-quench, Lean-burn) Gas Turbine Combustor

The transient processes involving lean blowout (LBO) in a RQL combustor such as the single cup combustor in the National Jet Fuels Combustion Program (NJFCP) referee rig are simulated with the reduced mechanisms based on Hybrid Chemistry for three different fuels, A2, C1 and C4. Experiments conducted in the NJFCP referee rig established a stable flame at a global equivalence ratio of 0.096 (the near LBO condition) as the starting condition for LBO tests performed with all A and C fuels. Simulations of the approach to LBO verify that a stable flame is established at the near-LBO condition for each fuel before reducing fuel flow rate (and thus equivalence ratio) in a stepwise manner. Main conclusions are: (1) For A2 fuel the equivalence ratio for LBO is 0.081 (2) For C1 fuel the equivalence ratio for LBO is 0.087 or 0.085 depended on different step-down transition paths. (3) For C4 fuel the equivalence ratio for LBO is 0.087 or 0.084 depended on types of mesh or boundary conditions. (4) The fuel relative difference from LES on LBO for C1 fuel relative to A2 fuel is 7.40% or 4.94% versus 7.83% from the experimental data. (5) The fuel relative difference from LES on LBO for C4 fuel relative to A2 is 6.17% or 7.69% versus 5.21% from the experimental data.

Lean Blow out↗
NASA NTRSDate not supplied

NASA’s Orbital Debris Optical Program: ES-MCAT Nearing Full Operational Capability (FOC)

The NASA JAO/ES-MCAT (Eugene Stansbery Meter Class Autonomous Telescope) Facility is nearing Full Operational Capability, or FOC. ES-MCAT is now fully capable of autonomously running all observations, including: (a) monitoring weather and closing when conditions are not safe, as well as halting observations when conditions are not suitable (e.g. too cloudy) for operations, (b) start-up/shut-down nightly tasking, (c) collecting calibration data and survey or TLE-tracked data, and (d) processing all collected data, including on-chip photometry and astrometry calibrations using the GAIA star catalogue. The processed data are then further analyzed at NASA Johnson Space Center to correlate detections with known objects in the Space Surveillance Network (SSN) catalogue. MCAT can collect data of specific objects with known orbits or can search for objects with orbits similar to those of spacecraft or rocket bodies that have recently broken up. However, the primary goal for ES-MCAT is to survey the geosynchronous (GEO) belt to provide a statistical sample of the GEO debris environment for both engineering models for spacecraft designers and long-term environment evolutionary purposes. The approach for sweeping the sky to statistically survey GEO has been investigated and updated from past surveys taken by NASA and will be reported, herein referred to as the Candy Cane method. ES-MCAT’s optical performance and the limiting magnitude for the full optical system will be discussed. An analysis used to determine which filter to use for GEO surveys (SDSS r′) includes combining the reflectivity of the primary and secondary mirrors, transmission of the field corrector and CCD window, and the quantum efficiency of the CCD detector, resulting in throughput of the full optical path. This throughput is then combined with the expected typical transparency of the atmosphere at ES-MCAT’s altitude/location for the Sloan Digital Sky Survey (SDSS) g′r′i′z′ and Johnson/Kron-Cousins BVRI filters to yield expected relative throughput.

S. M. Lederer↗
DOE OSTI2023

Up up down down left right left right B A Start for the catalytic hackers of programmable materials

Catalysts have advanced over the last century to accelerate and control reactions based on static active sites. More effective catalysis can be achieved using catalysts that change with time over the course of a reaction, providing a dynamic free energy landscape that is tailored to each step in the reaction sequence. Here, the catalyst is modulated via an input program that directs the surface to change physically or electronically with time, providing information regarding the extent and duration of change optimized for specific combinations of chemistry and programmable catalyst surfaces. While in its infancy, programmable catalysis is advancing with parallel efforts to establish fundamental principles of dynamic catalysts, design of programmable materials, and strategies to design input programs that will control catalysis for faster and more selective reactions.

catalyst↗
DOE OSTI2022

Developing an Undergraduate Research Laboratory for Experimental Physical Chemistry [Book Chapter]

Embarking on a faculty career in physical chemistry at a primarily undergraduate institution (PUI) is exciting, but also overwhelming. Becoming both an effective teacher and a productive researcher requires a good plan, hard work and support from others who understand what it takes to be successful. The phrase, “building a laboratory,” calls to mind the physical construction of a research instrument, but beginning a career at a PUI involves much more than assembling equipment. Funding for the lab must be secured, students must be recruited and mentored, and the lab must be overseen to keep things running on a daily basis. While many of these tasks would also be part of starting a career at a doctoral level institution, there are many special considerations that must be taken into account when working with undergraduate students because their laboratory experience and chemical knowledge are still within those beautiful but nascent stages. Here, this unique aspect makes building a research program challenging, but also very rewarding. Exposing young minds to the wonders of physical chemistry and building personal relationships through the mentoring process can be immensely gratifying. This chapter is a compilation of holistic advice for building an experimental physical chemistry research laboratory for undergraduates, reflecting a typical experience found in the United States.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

LANL ASC FY23 L2 Milestone Description and Completion Criteria [Slides]

In early 2021, the ASC Program decided that Ristra should provide a production code (Moya) for LANL’s mission in the Low Energy-Density Physics application space. At the same time, Ristra should design an environment for rapid development of new codes that can answer new questions on new hardware. We started FY22 by expanding upon our R&D efforts of high-order DG methods for hydrodynamics; Technical & staffing challenges caused us to abandon this for a traditional FV SGH approach, but leveraging modern techniques. Significant changes in FleCSI (v1.4→2.x) have us writing code anew, in a co-design effort with the FleCSI and FleCSI specialization projects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1972

Guidance system operations plan for manned CM earth orbital missions using program Skylark 1. Section 2: Data links

A computer program to define the digital uplink and downlink for use in manned command module orbital missions is presented. The subjects discussed are: (1) digital uplink to command module, (2) CMC digital downlink, (3) downlist formats, (4) description of telemetered qualities, (5) flagbits, and (6) effects of Fresh Start (V36) and Hardware Restart on flagword and channel bits.

Hamilton, M. H.↗
NASA NTRS1975

Discrete time modelization of human pilot behavior

This modelization starts from the following hypotheses: pilot's behavior is a time discrete process, he can perform only one task at a time and his operating mode depends on the considered flight subphase. Pilot's behavior was observed using an electro oculometer and a simulator cockpit. A FORTRAN program has been elaborated using two strategies. The first one is a Markovian process in which the successive instrument readings are governed by a matrix of conditional probabilities. In the second one, strategy is an heuristic process and the concepts of mental load and performance are described. The results of the two aspects have been compared with simulation data.

Cavalli, D.↗
NASA NTRS1985

Productivity improvement in engineering at Rocketdyne

The Rocketdyne Division of Rockwell International has embarked on a productivity improvement program in engineering. This effort included participation in the White Collar Productivity Improvement (WCPI) project sponsored by the American Productivity Center. A number of things have been learned through this project. It seems that any productivity improvement project should be employee driven. The Rocketdyne project was essentially started as a result of a grassroots effort to remove some particular hindrances, and employee enthusiasm was a prime factor in the continuing progress of the effort. A significant result was that awareness of problems at all levels increased. Many issues surfaced in the diagnostic phase, and were then noted and discussed. This process added legitimacy to issues that had previously been merely unspoken concerns. The initial feelings of many members of the pilot group was that significant changes would occur relatively quickly. It is now recognized that this will have to be an ongoing, long-term effort.

Nordlund, R. M.↗
NASA NTRS1988

A method for designing robust multivariable feedback systems

A new methodology is developed for the synthesis of linear, time-invariant (LTI) controllers for multivariable LTI systems. The aim is to achieve stability and performance robustness of the feedback system in the presence of multiple unstructured uncertainty blocks; i.e., to satisfy a frequency-domain inequality in terms of the structured singular value. The design technique is referred to as the Causality Recovery Methodology (CRM). Starting with an initial (nominally) stabilizing compensator, the CRM produces a closed-loop system whose performance-robustness is at least as good as, and hopefully superior to, that of the original design. The robustness improvement is obtained by solving an infinite-dimensional, convex optimization program. A finite-dimensional implementation of the CRM was developed, and it was applied to a multivariate design example.

Milich, David Albert↗
NASA NTRS1988

A method for designing robust multivariable feedback systems

A new methodology is developed for the synthesis of linear, time-invariant (LTI) controllers for multivariable LTI systems. The aim is to achieve stability and performance robustness of the feedback system in the presence of multiple unstructured uncertainty blocks; i.e., to satisfy a frequency-domain inequality in terms of the structured singular value. The design technique is referred to as the causality recovery methodology (CRM). Starting with an initial (nominally) stabilizing compensator, the CRM produces a closed-loop system whose performance-robustness is at least as good as, and hopefully superior to, that of the original design. The robustness improvement is obtained by solving an infinite-dimensional, convex optimization program. A finite-dimensional implementation of the CRM was developed, and it was applied to a multivariate design example.

Milich, David A.↗
NASA NTRS1991

Generation Of Surface Grids From Data Points

Computational procedure generates grids on complicated three-dimensional surfaces from sets of data points that lie on and specify those surfaces. Starting with grouping of possibly sparse surface points into lines and/or patches, procedure involves interpolation within and blending of lines and/or patches and possibly redistribution and reassembly of patches to obtain finished system of zonal patch grids that match at boundaries between them. Procedure semiautomated via computer program that performs all steps except selection of patches and interpolation points, left to discretion of user.

Luh, Raymond Ching-Chung↗
NASA NTRS1992

Algorithms for real-time fault detection of the Space Shuttle Main Engine

This paper reports on the results of a program to develop and demonstrate concepts related to a realtime health management system (HMS) for the Space Shuttle Main Engine (SSME). An HMS framework was developed on the basis of a top-down analysis of the current rocket engine failure modes and the engine monitoring requirements. One result of Phase I of this program was the identification of algorithmic approaches for detecting failures of the SSME. Three different analytical techniques were developed which demonstrated the capability to detect failures significantly earlier than the existing redlines. Based on promising initial results, Phase II of the program was initiated to further validate and refine the fault detection strategy on a large data base of 140 SSME test firings, and implement the resultant algorithms in real time. The paper begins with an overview of the refined algorithms used to detect failures during SSME start-up and main-stage operation. Results of testing these algorithms on a data base of nominal and off-nominal SSME test firings is discussed. The paper concludes with a discussion of the performance of the algorithms operating on a real-time computer system.

Ruiz, C. A.↗
NASA NTRS1992

Assessment of the US industrial program for AMTEC development

The Alkali Metal Thermal to Electric Converter (AMTEC) is a static energy conversion technology that is expected to provide low mass thermal to electric conversion with efficiencies between 20 and 35 percent. The U.S. program to develop this technology for space power applications has grown substantially over the past 3 years. This expanding program has brought together several laboratories and technical consultants, in separately sponsored projects, to develop the key elements of the technology. An assessment of this multiparty program indicates that, in general, the effort has focused on the high priority technical elements with only moderate overlap between individual projects. There are, however, several areas where additional coordination is needed between major participants in the existing projects, and other areas where new projects should be started, in order to provide reliable space power systems without unnecessary delays.

Sievers, R. K.↗
NASA NTRS1993

Liquid hydrogen foil-bearing turbopump

The testing and performance evaluation of a liquid hydrogen turbopump with the rotor supported by foil bearings is discussed. The objectives of the program were to demonstrate the long-life feature of a foil-bearing turbopump and to evaluate its operational characteristics. The demonstration has successfully shown the reliability, long life, and robust nature of foil-bearing turbopumps by operating for long periods of time, with many start and stop cycles and a wide speed range. It has also proven that foil-bearing turbopumps can start without total chilldown of the foil bearing, offering operational simplicity.

Gilbrech, Richard J.↗
NASA NTRS1994

Embedded parallel processing based ground control systems for small satellite telemetry

The use of networked terminals which utilize embedded processing techniques results in totally integrated, flexible, high speed, reliable, and scalable systems suitable for telemetry and data processing applications such as mission operations centers (MOC). Synergies of these terminals, coupled with the capability of terminal to receive incoming data, allow the viewing of any defined display by any terminal from the start of data acquisition. There is no single point of failure (other than with network input) such as exists with configurations where all input data goes through a single front end processor and then to a serial string of workstations. Missions dedicated to NASA's ozone measurements program utilize the methodologies which are discussed, and result in a multimission configuration of low cost, scalable hardware and software which can be run by one flight operations team with low risk.

Forman, Michael L.↗
NASA NTRS1999

Development of an Environmental Monitoring Package for the International Space Station

The first elements of the International Space Station (ISS) will soon be launched into space and over the next few years ISS will be assembled on orbit into its final configuration. Experiments will be performed on a continuous basis both inside and outside the station. External experiments will be mounted on attached payload locations specifically designed to accommodate experiments and provide data and power from ISS. From the beginning of the space station program it has been recognized that external experiments will require knowledge of the external environment because it can affect the science being performed and may impact lifetime and operations of the experiments. Recently an effort was initiated to design and develop an Environment Monitoring Package (EMP) was started. This paper describes the derivation of the requirements for the EMP package, the type of measurements that the EMP will make and types of instruments which will be employed to make these measurements.

Carruth, Ralph M., Jr.↗