Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SIMULATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

A lumped particle direct simulation Monte-Carlo method combined with the collisional-radiative model for simulations of non-equilibrium laser-induced plasma plumes

Collisional plasma plumes induced by laser irradiation of material targets exhibit large variations in local density as well as ionization and excitation states, making purely hydrodynamic or kinetic simulations inaccurate or infeasible. To address this challenge and capture non-equilibrium effects in laser-induced plasma plumes at arbitrary degrees of ionization, we develop a hybrid computational approach that combines the kinetic direct simulation Monte Carlo (DSMC) method with a collisional-radiative model (CRM). This ℓDSMC-CRM approach utilizes a lumped particle method to represent minor fractions of excited ions in particle-based simulations and a special coarse-graining technique for atomic spectra and photoionization rates, ensuring numerical convergence at reduced computational cost. The hybrid approach is applied to simulate spatially homogeneous relaxation as well as one- and two-dimensional expansions of plasma plumes induced by irradiation of a copper target by a nanosecond laser pulse in a vacuum or background gas. The comparison with an equilibrium model, where local Saha-Boltzmann equilibrium is enforced, shows that the non-equilibrium effects play a dominant role. The equilibrium model can fail to predict the flow structure and strongly underestimate the degree of absorption of laser radiation by the plume. The ℓDSMC-CRM approach is validated against experimental data demonstrating reasonable agreement with the experimental electron density and temperature, while the equilibrium model is found to dramatically underestimate electron density and temperature. The flexibility of the ℓDSMC-CRM approach allows for its seamless integration into existing DSMC frameworks, making it a valuable tool for high-fidelity plasma modeling in laser-material interactions, laser-based manufacturing, and beyond.

97 MATHEMATICS AND COMPUTING↗

Numerical methods for the simulation of complex multi-body flows with applications for the integrated Space Shuttle vehicle

The following papers are presented: (1) numerical methods for the simulation of complex multi-body flows with applications for the Integrated Space Shuttle vehicle; (2) a generalized scheme for 3-D hyperbolic grid generation; (3) collar grids for intersecting geometric components within the Chimera overlapped grid scheme; and (4) application of the Chimera overlapped grid scheme to simulation of Space Shuttle ascent flows.

Chan, William M.↗

Large-eddy simulation of non-vaporizing sprays using the spectral-element method

Predictive simulations of high-pressure sprays require accurate representation of the turbulent gaseous flow field generated by liquid jet. Typically, the accuracy that can be obtained with low-order numerical methods (e.g. finite volume, finite element) is limited by stability issues in fine grids and the order of convergence of the method. In this work, we resolve the turbulent flow field in an Eulerian manner using the high-order spectral element method, coupled with a Lagrangian parcels approach to model the atomizing liquid jet. Large eddy simulations of single-hole sprays under non-evaporative conditions were conducted and compared against experimental data from Margot et al. (2008) and Spray A data from the Engine Combustion Network. The sensitivity of liquid penetration and droplet sizes to different breakup model parameters was studied. The effect of different numerical parameters, such as polynomial order of the solution (grid resolution), on liquid penetration was also analyzed. The method achieved grid-independent results using p-refinement, achieving finer resolution (by a factor of x 1.7 - x 3.5) in the gas-phase solution than in state-of-the-art simulations using the finite-volume method. Here the results showed good agreement with experimental data, demonstrating the ability of the current method to accurately capture liquid penetration and the shape of the spray.

97 MATHEMATICS AND COMPUTING↗

Understanding Contamination; Twenty Years of Simulating Radiological Contamination

A wide variety of simulated contamination methods have been developed by researchers to reproducibly test radiological decontamination methods. Some twenty years ago a method of non-radioactive contamination simulation was proposed at the Idaho National Laboratory (INL) that mimicked the character of radioactive cesium and zirconium contamination on stainless steel. It involved baking the contamination into the surface of the stainless steel in order to 'fix' it into a tenacious, tightly bound oxide layer. This type of contamination was particularly applicable to nuclear processing facilities (and nuclear reactors) where oxide growth and exchange of radioactive materials within the oxide layer became the predominant model for material/contaminant interaction. Additional simulation methods and their empirically derived basis (from a nuclear fuel reprocessing facility) are discussed. In the last ten years the INL, working with the Defense Advanced Research Projects Agency (DARPA) and the National Homeland Security Research Center (NHSRC), has continued to develop contamination simulation methodologies. The most notable of these newer methodologies was developed to compare the efficacy of different decontamination technologies against radiological dispersal device (RDD, 'dirty bomb') type of contamination. There are many different scenarios for how RDD contamination may be spread, but the most commonly used one at the INL involves the dispersal of an aqueous solution containing radioactive Cs-137. This method was chosen during the DARPA projects and has continued through the NHSRC series of decontamination trials and also gives a tenacious 'fixed' contamination. Much has been learned about the interaction of cesium contamination with building materials, particularly concrete, throughout these tests. The effects of porosity, cation-exchange capacity of the material and the amount of dirt and debris on the surface are very important factors. The interaction of the contaminant/substrate with the particular decontamination technology is also very important. Results of decontamination testing from hundreds of contaminated coupons have lead to certain conclusions about the contamination and the type of decontamination methods being deployed. A recent addition to the DARPA initiated methodology simulates the deposition of nuclear fallout. This contamination differs from previous tests in that it has been developed and validated purely to simulate a 'loose' type of contamination. This may represent the first time that a radiologically contaminated 'fallout' stimulant has been developed to reproducibly test decontamination methods. While no contaminant/methodology may serve as a complete example of all aspects that could be seen in the field, the study of this family of simulation methods provides insight into the nature of radiological contamination.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

System and Method for Finite Element Simulation of Helicopter Turbulence

The present invention provides a turbulence model that has been developed for blade-element helicopter simulation. This model uses an innovative temporal and geometrical distribution algorithm that preserves the statistical characteristics of the turbulence spectra over the rotor disc, while providing velocity components in real time to each of five blade-element stations along each of four blades. for a total of twenty blade-element stations. The simulator system includes a software implementation of flight dynamics that adheres to the guidelines for turbulence set forth in military specifications. One of the features of the present simulator system is that it applies simulated turbulence to the rotor blades of the helicopter, rather than to its center of gravity. The simulator system accurately models the rotor penetration into a gust field. It includes time correlation between the front and rear of the main rotor, as well as between the side forces felt at the center of gravity and at the tail rotor. It also includes features for added realism, such as patchy turbulence and vertical gusts in to which the rotor disc penetrates. These features are realized by a unique real time implementation of the turbulence filters. The new simulator system uses two arrays one on either side of the main rotor to record the turbulence field and to produce time-correlation from the front to the rear of the rotor disc. The use of Gaussian Interpolation between the two arrays maintains the statistical properties of the turbulence across the rotor disc. The present simulator system and method may be used in future and existing real-time helicopter simulations with minimal increase in computational workload.

McFarland, R. E.↗

Parallel methods for dynamic simulation of multiple manipulator systems

In this paper, efficient dynamic simulation algorithms for a system of m manipulators, cooperating to manipulate a large load, are developed; their performance, using two possible forms of parallelism on a general-purpose parallel computer, is investigated. One form, temporal parallelism, is obtained with the use of parallel numerical integration methods. A speedup of 3.78 on four processors of CRAY Y-MP8 was achieved with a parallel four-point block predictor-corrector method for the simulation of a four manipulator system. These multi-point methods suffer from reduced accuracy, and when comparing these runs with a serial integration method, the speedup can be as low as 1.83 for simulations with the same accuracy. To regain the performance lost due to accuracy problems, a second form of parallelism is employed. Spatial parallelism allows most of the dynamics of each manipulator chain to be computed simultaneously. Used exclusively in the four processor case, this form of parallelism in conjunction with a serial integration method results in a speedup of 3.1 on four processors over the best serial method. In cases where there are either more processors available or fewer chains in the system, the multi-point parallel integration methods are still advantageous despite the reduced accuracy because both forms of parallelism can then combine to generate more parallel tasks and achieve greater effective speedups. This paper also includes results for these cases.

Mcmillan, Scott↗

Simulation of crack induced nonlinear elasticity using the combined finite-discrete element method

Numerical simulation of nonlinear elastic wave propagation in solids with cracks is indispensable for decoding the complicated mechanisms associated with the nonlinear ultrasonic techniques in NonDestructive Testing (NDT). Here, we introduce a two-dimensional implementation of the combined finitediscrete element method (FDEM), which merges the finite element method (FEM) and the discrete element method (DEM), to explicitly simulate the crack induced nonlinear elasticity in solids with both horizontal and inclined cracks. In the FDEM model, the solid is discretized into finite elements to capture the wave propagation in the bulk material, and the finite elements along the two sides of the crack also behave as discrete elements to track the normal and tangential interactions between crack surfaces. The simulation results show that for cracked models, nonlinear elasticity is generated only when the excitation amplitude is large enough to trigger the contact between crack surfaces, and the nonlinear behavior is very sensitive to the crack surface contact. The simulations reveal the influence of normal and tangential contact on the nonlinear elasticity generation. Moreover, the results demonstrate the capabilities of FDEM for decoding the causality of nonlinear elasticity in cracked solid and its potential to assist in Non-Destructive Testing (NDT).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

System dynamic simulation: A new method in social impact assessment (SIA)

Many complex social questions are difficult to address adequately with conventional methods and techniques, due to the complicated dynamics, and hard to quantify social processes. Despite these difficulties researchers and practitioners have attempted to use conventional methods not only in evaluative modes but also in predictive modes to inform decision making. The effectiveness of SIAs would be increased if they were used to support the project design processes. This requires deliberate use of lessons from retrospective assessments to inform predictive assessments. Social simulations may be a useful tool for developing a predictive SIA method. There have been limited attempts to develop computer simulations that allow social impacts to be explored and understood before implementing development projects. In light of this argument, this paper aims to introduce system dynamic (SD) simulation as a new predictive SIA method in large development projects. We propose the potential value of the SD approach to simulate social impacts of development projects. We use data from the SIA of Gareh-Bygone floodwater spreading project to illustrate the potential of SD simulation in SIA. It was concluded that in comparison to traditional SIA methods SD simulation can integrate quantitative and qualitative inputs from different sources and methods and provides a more effective and dynamic assessment of social impacts for development projects. We recommend future research to investigate the full potential of SD in SIA in comparing different situations and scenarios.

54 ENVIRONMENTAL SCIENCES↗

Local Elastic Constants for Epoxy-Nanotube Composites from Molecular Dynamics Simulation

A method from molecular dynamics simulation is developed for determining local elastic constants of an epoxy/nanotube composite. The local values of C11, C33, K12, and K13 elastic constants are calculated for an epoxy/nanotube composite as a function of radial distance from the nanotube. While the results possess a significant amount of statistical uncertainty resulting from both the numerical analysis and the molecular fluctuations during the simulation, the following observations can be made. If the size of the region around the nanotube is increased from shells of 1 to 6 in thickness, then the scatter in the data reduces enough to observe trends. All the elastic constants determined are at a minimum 20 from the center of the nanotube. The C11, C33, and K12 follow similar trends as a function of radial distance from the nanotube. The K13 decreases greater distances from the nanotube and becomes negative which may be a symptom of the statistical averaging.

Frankland, S. J. V.↗

A spectral element method for the simulation of unsteady incompressible flows with heat transfer

The spectral element method is a high-order finite element technique for solution of the Navier-Stokes and energy equations. In the isoparametric spectral element discretization, the domain is broken up into general brick elements, and the dependent and independent variables represented as high-order tensor-product Lagrangian interpolants through Chebyshev collocation points. The nonlinear and convective terms in the governing equations are treated with explicit collocation, while the pressure and diffusive contributions are handled implicitly using variational projection operators. The method is applied to flow past a cylinder, flow in grooved channels, and natural convection in an enclosure.

Karniadakis, George E.↗

A high accuracy/resolution spectral element/Fourier–Galerkin method for the simulation of shoaling non-linear internal waves and turbulence in long domains with variable bathymetry

A high-order hybrid continuous-Galerkin numerical method, designed for the simulation of non-linear, non -hydrostatic internal waves and turbulence in long computational domains with complex bathymetry, is presented. The spatial discretization in the non-periodic wave-propagating directions, utilizes the nodal spectral element method. Such a high-order element-based discretization allows the highly accurate representation of complex domain geometry along with the flexibility of concentrating resolution in areas of interest. Under the assumption of the normal-to-isobath propagation of non-linear internal waves, a third periodic direction is incorporated via a Fourier-Galerkin discretization. The distinct non-hydrostatic nature of non-linear internal waves and, any instabilities and turbulence therein, necessitates the numerically challenging solution of the pressure Poisson problem. A defining feature of this work is the application of a domain decomposition approach, combined with block-Jacobi/deflation-based preconditioning to the pressure Poisson problem. Such a combined approach is particularly suitable for the long high aspect-ratio complex domains of interest and enables the efficient high-accuracy reproduction of the non-hydrostatic dynamics of non-linear internal waves. Implementation details are also described in the context of the stability of the solver and its parallelization strategy. A series of benchmarks of increasing complexity demonstrate the robustness of the flow solver. The benchmarks culminate with the three-dimensional simulation of a convectively breaking mode-one non-linear internal wave over a realistic South-China-Sea bathymetric transect and background current/stratification profiles.

Deflation↗

Simulation, Manual and Computerized (SMAC)

The guiding concept was to develop a simulation modeling method which can be quickly taught and learned, yet can be used to solve significant real world problems. SMAC consists of two manual simulation methods and one computer program. One of the manual methods is designed to impart an understanding of simulation; the other is designed to be a practical simulation method. The computer program will simulate queueing situations with up to five parallel servers or up to three series servers. The program is built around GASP 2A routines and retains the 8K capability of GASP.

Parker, M. W.↗

Application of the direct simulation Monte Carlo method to the full shuttle geometry

A new set of programs has been developed for the application of the direct simulation Monte Carlo (or DSMC) method to rarefied gas flows with complex three-dimensional boundaries. The programs are efficient in terms of the computational load and also in terms of the effort required to set up particular cases. This efficiency is illustrated through computations of the flow about the Shuttle Orbiter. The general flow features are illustrated for altitudes from 170 to 100 km. Also, the computed lift-drag ratio during re-entry is compared with flight measurements.

Bird, G. A.↗

A Mesh-Free Method to Predictively Simulate Solid-to-Liquid Phase Transitions in Abnormal Thermal Environments

Particle methods in computational physics are useful for modeling the motion of fluids and solids subject to large deformations. Under these conditions, mesh-based approaches often fail due to decreasing element quality leading to inaccuracy and instability. The developed software package called Moab investigates and prototypes next-generation particle methods, focusing on rigorous error analysis and active error minimization strategies during the computation. The present work discusses examples calculations representative of real engineering problems with quantified and maximized accuracy while demonstrating the potential for meeting engineering performance requirements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Comparison of Different Methods of Atomistic Simulation To Calculate the Temperature of Phase Transition Using the Example of Zirconium

Comparison of various methods for calculating the phase transition temperature based on atomistic simulation such as two-phase simulation, single-phase simulation, calculations of thermodynamic potentials using phonon spectra is performed. Based on the simulation of zirconium, melting and transition between different crystalline phases are studied. It is shown that the Lindemann criterion is quite rigorous when describing the melting curve in the phase diagram. However, the threshold values of the Lindemann parameter corresponding to the phase transition may differ in different models. In addition, the results of the study allow us to estimate the accuracy of calculating the phase transition temperature based on the thermodynamic approach using the concept of entropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

WE-D-18A-01: Evaluation of Three Commercial Metal Artifact Reduction Methods for CT Simulations in Radiation Therapy Treatment Planning

Purpose: To evaluate three commercial metal artifact reduction methods (MAR) in the context of radiation therapy treatment planning. Methods: Three MAR strategies were evaluated: Philips O-MAR, monochromatic imaging using Gemstone Spectral Imaging (GSI) dual energy CT, and monochromatic imaging with metal artifact reduction software (GSIMARs). The Gammex RMI 467 tissue characterization phantom with several metal rods and two anthropomorphic phantoms (pelvic phantom with hip prosthesis and head phantom with dental fillings), were scanned with and without (baseline) metals. Each MAR method was evaluated based on CT number accuracy, metal size accuracy, and reduction in the severity of streak artifacts. CT number difference maps between the baseline and metal scan images were calculated, and the severity of streak artifacts was quantified using the percentage of pixels with >40 HU error (“bad pixels”). Results: Philips O-MAR generally reduced HU errors in the RMI phantom. However, increased errors and induced artifacts were observed for lung materials. GSI monochromatic 70keV images generally showed similar HU errors as 120kVp imaging, while 140keV images reduced errors. GSI-MARs systematically reduced errors compared to GSI monochromatic imaging. All imaging techniques preserved the diameter of a stainless steel rod to within ±1.6mm (2 pixels). For the hip prosthesis, O-MAR reduced the average % bad pixels from 47% to 32%. For GSI 140keV imaging, the percent of bad pixels was reduced from 37% to 29% compared to 120kVp imaging, while GSI-MARs further reduced it to 12%. For the head phantom, none of the MAR methods were particularly successful. Conclusion: The three MAR methods all improve CT images for treatment planning to some degree, but none of them are globally effective for all conditions. The MAR methods were successful for large metal implants in a homogeneous environment (hip prosthesis) but were not successful for the more complicated case of dental artifacts.

60 APPLIED LIFE SCIENCES↗

High Fidelity Computational Analysis of CO2 Trapping at Pore Scales (Final Technical Report)

With an alarming rise in carbon dioxide (CO2) emission from anthropogenic sources, CO2 sequestration has become an attractive choice to mitigate the emission. Some popular storage media for CO 2 are oil reservoirs, deep coal-bed, and deep oceanic-beds. These have been used for the long term CO 2 storage. Due to special lowering viscosity and surface tension property of CO 2 , it has been widely used for enhanced oil recovery. The sites for CO 2 sequestration or enhanced oil recovery mostly consist of porous rocks. Lack of knowledge of molecular mobility under confinement and molecule-surface interactions between CO2 and natural porous media results in generally governed by unpredictable absorption kinetics and total absorption capacity for injected fluids, and therefore, constitutes barriers to the deployment of this technology. Therefore, it is important to understand the flow dynamics of CO 2 through the porous microstructures at the finest scale (pore-scale) to accurately predict the storage potential and long-term dynamics of the sequestered CO 2 . This report discusses about pore-network flow modeling approach using variational method and analyzes simulated results this method simulations at pore-scales for idealized network and using Berea Sandstone CT scanned images. Variational method provides a promising way to study the kinetic behavior and storage potential at the pore scale in the presence of other phases. The current study validates variational solutions for single and two-phase Newtonian and single phase non-Newtonian flow through angular pores for special geometries whose analytical and/or empirical solutions are known. The hydraulic conductance for single phase flow through a triangular duct was also validated against empirical results derived from lubricant theory.

54 ENVIRONMENTAL SCIENCES↗