SEARCH · Engineering Papers

Results for “SHEAR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Local structure of intercomponent energy transfer in homogeneous turbulent shear flow

Intercomponent energy transfer by pressure-strain-rate was investigated for homogeneous turbulent shear flow. The rapid and slow parts of turbulent pressure (decomposed according to the influence of the mean deformation rate) are found to be uncorrelated; this finding provides strong justification for current modeling procedure in which the pressure-strain-rate term is split into the corresponding parts. Issues pertinent to scales involved in the intercomponent energy transfer are addressed in comparison with those for the Reynolds-stress and vorticity fields. A physical picture of the energy transfer process is described from a detailed study of instantaneous events of high transfer regions. It was found that the most significant intercomponent energy transfer events are highly localized in space and are imbedded within a region of concentrated vorticity.

Brasseur, James G.↗

NASA NTRS1988

Flight penetration of wind shear: Control strategies

Wind shear is a dangerous condition where there is a sharp change in the direction and magnitude of the wind velocity over a short distance or time. This condition is especially dangerous to aircraft during landing and takeoff and can cause a sudden loss of lift and thereby height at a critical time. A numerical simulation showed the effective performance of the Linear Quadratic Regulator and the Nonlinear Inverse Dynamics controllers. The major conclusions are listed and discussed.

Joshi, Amit S.↗

NASA NTRS1987

Temperature-dependent tensile and shear response of graphite/aluminum

The thermo-mechanical response of unidirectional P100 graphite fiber/6061 aluminum matrix composites was investigated at four temperatures:-150, +75, +250, and +500 F. Two types of tests, off-axis tension and losipescu shear, were used to obtain the desired properties. Good experimental-theoretical correlation was obtained for Exx, vxy, and G12. It is shown that E11 is temperature independent, but E22, v12, and G12 generally decrease with increasing temperature. Compared with rather high longitudinal strength, very low transverse strength was obtained for the graphite/aluminum. The poor transverse strength is believed to be due to the low interfacial bond strength in this material. The strength decrease significantly with increasing temperature. The tensile response at various temperatures is greatly affected by the residual stresses caused by the mismatch in the coefficients of thermal expansion of fibers and matrix. The degradation of the aluminum matrix properties at higher temperatures has a deleterious effect on composite properties. The composite has a very low coefficient of thermal expansion in the fiber direction.

Fujita, T.↗

NASA NTRS1988

Evolution of hairpin vortices in a shear flow

Recent experimental studies suggest that the hairpin vortex plays an important (and perhaps dominant) role in the dynamics of turbulent flows near walls. In this study a numerical procedure is developed to allow the accurate computation of the trajectory of a 3-D vortex having a small core radius. For hairpin vortices which are convected in a shear flow above a wall, the calculated results show that a 2-D vortex containing a small 3-D disturbance distorts into a complex shape with subsidiary hairpin vortices forming outboard of the original hairpin vortex. As the vortex moves above the wall, it induces unsteady motion in the viscous flow near the wall: numerical solutions suggest that the boundary-layer flow near the wall will ultimately erupt in response to the motion of the hairpin vortex and in the process a secondary hairpin vortex will be created. The computer results agree with recent experimental investigations.

Hon, T.-L.↗

NASA NTRS1987

Control of shear flows by artificial excitation

Investigations involving artificial excitation of various shear flows are reviewed. Potential applications of excitation in flow control, e.g., in enhancing mixing, and in delaying transition and separation are discussed. An account is given of the current activities at NASA Lewis Research Center in this regard.

Rice, E. J.↗

NASA NTRS1987

Aeroacoustics of subsonic turbulent shear flows

Sound generation in turbulent shear flows is examined. The emphasis is on simultaneous calculation of the turbulent flow along with the resulting sound generation rather than the alternative acoustic analogy approach. The first part of the paper is concerned with solid surface interaction. The second part concentrates on the sound generated by turbulence interacting with itself.

Goldstein, Marvin E.↗

NASA NTRS1987

Stress analysis of the cracked-lap-shear specimen - An ASTM round-robin

This ASTM Round Robin was conducted to evaluate the state of the art in stress analysis of adhesively bonded joint specimens. Specifically, the participants were asked to calculate the strain-energy-release rate for two different geometry cracked lap shear (CLS) specimens at four different debond lengths. The various analytical techniques consisted of 2- and 3-dimensional finite element analysis, beam theory, plate theory, and a combination of beam theory and finite element analysis. The results were examined in terms of the total strain-energy-release rate and the mode I to mode II ratio as a function of debond length for each specimen geometry. These results basically clustered into two groups: geometric linear or geometric nonlinear analysis. The geometric nonlinear analysis is required to properly analyze the CLS specimens. The 3-D finite element analysis gave indications of edge closure plus some mode III loading. Each participant described his analytical technique and results. Nine laboratories participated.

Johnson, W. S.↗

NASA NTRS1988

Dynamic shear of granular material under variable gravity conditions

This paper describes some experiments with granular materials which recently have been conducted aboard the NASA KC-135 aircraft during variable gravity maneuvers. The main experimental apparatus consisted of a small drum containing granular material which was rotated slowly while the angle assumed by the slip surface with respect to the horizontal was observed and recorded photographically. Conventional wisdom has held that this 'dynamic angle of response' was a material constant, independent of (among other things) gravitational level. The results presented here are quite contrary, suggesting instead an angle that varies with the reciprocal of the square root of gravity. This finding may have important consequences on the understanding of many active processes in Planetary Geology involving granular materials and may provide qualitative confirmation of some of the theoretical predictions of modern models of granular shear flows.

White, B. R.↗

NASA NTRS1988

Simultaneous density and electric field fluctuation spectra associated with velocity shears in the auroral oval

A detailed study is presented of simultaneous density and electric field fluctuation spectra over a large-scale length range seen in association with large structured convective plasma flows, field-aligned currents, and particle precipitation at high latitudes. The data were obtained for two Dynamics Explorer 2 orbits at two different altitudes within the F region and the topside ionosphere. The observations are compared with results of nonlinear simulations of shear flow-driven instabilities and predictions based on two-dimensional turbulence arguments, with particular reference to the Kelvin-Helmholtz process.

Basu, Sunanda↗

NASA NTRS1988

Time-accurate simulations of a shear layer forced at a single frequency

This report presents calculations of the forced shear layer studied experimentally by Oster and Wygnanski (1982) and Weisbrot (1984). Two different computational approaches are examined: Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES).The DNS appraoch solves the full three-dimensional, Navier-Stokes equations for a temporally evolving mixing layer, while the LES approach (as used in this report) solves the two-dimensional, Navier-Stokes equations with a subgrid scale turbulence model. While the comparison between these calculations and experimental data was hampered by a lack of information on the inflow boundary conditions, the calculations are shown to qualitatively agree with several aspects of the experiment. The sensitivity of these calculations to factors such as mesh refinement and Reynolds number is illustrated.

Claus, R. W.↗

NASA NTRS1988

Microplate and shear zone models for oceanic spreading center reorganizations

The kinematics of rift propagation and the resulting goemetries of various tectonic elements for two plates is reviewed with no overlap zone. The formation and evolution of overlap regions using schematic models is discussed. The models are scaled in space and time to approximate the Easter plate, but are simplified to emphasize key elements. The tectonic evolution of overlap regions which act as rigid microplates and shear zones is discussed, and the use of relative motion and structural data to discriminate between the two types of models is investigated. The effect of propagation rate and rise time on the size, shape, and deformation of the overlap region is demonstrated.

Engeln, Joseph F.↗

NASA NTRS1988

Optimal penetration landing trajectories in the presence of wind shear

Aircraft penetration landing in the presence of strong-to-severe wind shear is investigated analytically. The optimal-control problem for vertical-plane trajectories is considered, using angle of attack as one control parameter with either (1) a power setting (PS) which remains constant at its preshear value, (2) a PS which increases to its maximum value, or (3) a PS which is controlled (as the second parameter). The problem formulation is explained in detail, and numerical results obtained with the primal sequential gradient-restoration algorithm of Miele and Wang (1986) are presented in extensive tables and graphs. It is found that the touchdown requirements can only be satisfied by optimal trajectories using scheme (1) (but only at low altitudes) or scheme (3); the characteristics of the latter trajectories are explored.

Miele, A.↗

NASA NTRS1987

Reynolds shear stress development in pressure-driven three-dimensional turbulent boundary-layers

The development of the Reynolds stresses has been examined experimentally in an initially two-dimensional boundary layer which is driven to three dimensionality by a spanwise pressure gradient. The pressure field was imposed by an upstream-facing wedge. Two different wedge angles were used in order to vary the level of boundary layer skewing. Bradshaw's Al parameter was found to decrease with the rate of decrease being dependent on the level of skewing between the freestream and the wall flow. It was also concluded that the ratio of the cross-stream to streamwise shear stress components was governed by the rate of freestream turning.

Anderson, S. D.↗

NASA NTRS1988

Stochastic estimation of organized turbulent structure - Homogeneous shear flow

A generalization of the conditional-eddy concept is proposed in which the conditional event specifies the local kinematic state in terms of the velocity and the deformation. Results are presented for stochastically estimated conditional eddies given the local kinematics. The equation governing the probability density function of a kinematic state has been derived for constant-property incompressible flow, providing a link between coherent flow structures corresponding to the conditional eddies and the modelling of turbulent transport. The primary contributions to the second-quadrant and fourth-quadrant Reynolds-stress events in homogeneous shear flow are shown to come from flow induced through the 'legs' and close to the 'heads' of upright and inverted 'hairpins', respectively.

Adrian, Ronald J.↗

NASA NTRS1988

Velocity spectra in the irrotational flow outside a turbulent shear layer

The relationship between the spectra of the three normal stresses near a turbulent shear layer is derived from the constraint of irrotationality. The relationship implies that the common practice of determining time scales of the turbulence from spectra in the near field is not valid. This implication is reinforced by a discussion of the scaling of irrotational spectra that follows from the formulation of Phillips (1975).

Wood, D. H.↗

NASA NTRS1988

Computation of two-phase shear-layer flow using an Eulerian-Lagrangian analysis

A combined Eulerian-Lagrangian analysis which combines a linearized block implicit Navier-Stokes analysis for the continuous phase with a Lagrangian analysis for the discrete phase has been utilized to simulate a two-phase shear-layer flow in a two-dimensional channel flow configuration. The motion of the particles is tracked in computational coordinate space, resulting in improved computational efficiency, and interphase coupling terms for the Eulerian analysis are computed from the instantaneous distribution of the particles rather than the trajectory information. The use of the implicit Navier-Stokes analysis for the continuous phase has made it possible to efficiently use a highly stretched mesh. A low Reynolds number form of the k-epsilon turbulence model was used with near-wall resolution, thus eliminating the need to use the 'wall-function' approach. The streamwise velocity profiles for the continuous and the discrete phases have been compared with experimental data for two test cases.

Sabnis, Jayant S.↗

NASA NTRS1988

Shear rheological characterization of motor oils

Measurements of high pressure viscosity, traction coefficient, and EHD film thickness were performed on twelve commercial automotive engine oils, a reference oil, two unformulated base oils and two unformated base oil and polymer blends. An effective high shear rate inlet viscosity was calculated from film thickness and pressure viscosity coefficient. The difference between measured and effective viscosity is a function of the polymer type and concentration. Traction measurements did not discriminate mileage formulated oils from those not so designated.

Bair, Scott↗

NASA NTRS1988

Nonlinear 3-D evolution of bounded kinetic Alfven waves due to shear flow and collisionless tearing instability

The three-dimensional nonlinear simulation of the evolution of a kinetic Alfven wave is presented for simple boundary conditions that resemble those of a discrete auroral breakup arc. The model used is a variant of the reduced megnetohydrodynamic description that includes, in addition, the important dispersive effect of electron inertia. It is found that with a 'generator' boundary condition corresponding to a current generator and a fully conducting 'load' boundary, the wave evolves three-dimensionally through a combination of shear flow and collisionless tearing mode instability.

Seyler, Charles E., Jr.↗