Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAMPLED DATA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Accessing the strong interaction between Λ baryons and charged kaons with the femtoscopy technique at the LHC

The interaction between baryons and kaons/antikaons is a crucial ingredient for the strangeness $S$ = 0 and $S$ = -2 sector of the meson–baryon interaction at low energies. In particular, the $Λ\overline{K}$ might help in understanding the origin of states such as the $Ξ$(1620), whose nature and properties are still under debate. Experimental data on $Λ–K$ and $Λ–\overline{K}$ systems are scarce, leading to large uncertainties and tension between the available theoretical predictions constrained by such data. In this Letter we present the measurements of $Λ–K$ + ⊕ $\overline{Λ}–K$ - and $Λ–K$ - ⊕ $\overline{Λ}–K$ + correlations obtained in the high multiplicity triggered data sample in pp collisions at $\sqrt{s}$ = 13 TeV recorded by ALICE at the LHC. The correlation function for both pairs is modeled using the Lednický–Lyuboshits analytical formula and the corresponding scattering parameters are extracted. The $Λ–K$ - ⊕ $\overline{Λ}–K$ + correlations show the presence of several structures at relative momenta k above 200 MeV/c, compatible with the $Ω$ baryon, the $Ξ$(1690), and $Ξ$(1820) resonances decaying into $Λ–K$ - pairs. The low $k^*$ region in the $Λ–K$ - ⊕ $\overline{Λ}–K$ + also exhibits the presence of the $Ξ$(1620) state, expected to strongly couple to the measured pair. The presented data allow to access the $ΛK$ + and $ΛK$ - strong interaction with an unprecedented precision and deliver the first experimental observation of the $Ξ$(1620) decaying into $ΛK$ - .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Overview of the Third Convection and Moisture EXperiment (CAMEX-3)

The Convection And Moisture EXperiment (CAMEX) is a series of field research investigations sponsored by the National Aeronautics and Space Administration (NASA). The third field campaign in the CAMEX series (CAMEX-3) is scheduled for 6 August - 23 September, 1998 to study tropical cyclone development, tracking, intensification, and landfalling impacts using NASA-funded aircraft remote sensing instrumentation. This study will yield high spatial and temporal information of hurricane structure, dynamics, and motion. These data, when analyzed within the context of more traditional aircraft, satellite, and ground-based radar observations, should provide additional insight to hurricane modelers and forecasters who continually strive to improve hurricane predictions. During CAMEX-3, NASA will deploy a high attitude ER-2 and medium altitude DC-8 aircraft from Patrick Air Force Base, Florida. Ground-based instrumentation will also be stationed on Andros Island, Bahamas. Opportunities for coordinated aircraft missions with the National Oceanic and Atmospheric Administration (NOAA) Hurricane Research Division are also being planned. This presentation will provide an overview of the CAMEX-3 missions and key case studies sampled. Data availability and access will also be discussed.

Hood, Robbie↗

Fuel Cycle Research & Development Technical Monthly-March 2012

Several MPACT BCPs were executed in February, reflecting the shift in MPACT priorities directed late last year. Work continued on the FY2014 IPL, also bringing it in line with the new priorities. Preparations were made for the March MPACT Working Group meeting, in conjunction with Savannah River which is hosting the meeting. Steps were taken to initiate a new project with the World Institute for Nuclear Security, including discussions with WINS staff and preliminary work on the required procurement documentation. Several hardware issues were worked through. The newest detector array is working at LANL. A thorough analysis of previously collected Pu sample data using recently developed analysis code with improved spectral energy calibrations was completed. We now have a significantly better understanding of measurement uncertainties.

08 HYDROGEN↗

Search for Excited Leptons in Proton-Proton Collisions at $\sqrt{s}$ = 8 TeV

A search for compositeness of electrons and muons is presented using a data sample of proton-proton collisions at a center-of-mass energy of $ \sqrt{s} = 8 $ TeV collected with the CMS detector at the LHC and corresponding to an integrated luminosity of 19.7 fb$^{−1}$. Excited leptons (ℓ$^{*}$) produced via contact interactions in conjunction with a standard model lepton are considered, and a search is made for their gauge decay modes. The decays considered are ℓ$^{*}$ → ℓγ and ℓ$^{*}$ → ℓZ, which give final states of two leptons and a photon or, depending on the Z-boson decay mode, four leptons or two leptons and two jets. The number of events observed in data is consistent with the standard model prediction. Exclusion limits are set on the excited lepton mass, and the compositeness scale Λ. For the case M$_{ℓ*}$ = Λ the existence of excited electrons (muons) is excluded up to masses of 2.45 (2.47) TeV at 95% confidence level. Neutral current decays of excited leptons are considered for the first time, and limits are extended to include the possibility that the weight factors f and f′, which determine the couplings between standard model leptons and excited leptons via gauge mediated interactions, have opposite sign.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Engine identification for adaptive control

An attempt to obtain a dynamic model for a turbofan gas turbine engine for the purpose of adaptive control is described. The requirements for adaptive control indicate that a dynamic model should be identified from data sampled during engine operation. The dynamic model identified was of the form of linear differential equations with time varying coefficients. A turbine engine is, however, a highly nonlinear system, so the identified model would be valid only over a small area near the operating point, thus requiring frequent updating of the coefficients in the model. Therefore it is necessary that the identifier use only recent information to perform its function. The identifier selected minimized the square of the equation errors. Known linear systems were used to test the characteristics of the identifier. It was found that the performance was dependent on the number of data points used in the computations and upon the time interval over which the data points were obtained. Preliminary results using an engine deck for the quiet, clean, shorthaul experimental engine indicate that the identified model predicts the engine motion well when there is sufficient dynamic information, that is when the engine is in transient operation.

Leonard, R. G.↗

Measurements of branching fraction ratios and CP asymmetries in B+/- ->D_CP K+/- decays in hadron collisions

We reconstruct B{sup {+-}} {yields} DK{sup {+-}} decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1 fb{sup -1} of integrated luminosity. We select decay modes where the D meson decays to either K{sup -}{pi}{sup +} (flavor eigenstate) or K{sup -}K{sup +}, {pi}{sup -}{pi}{sup +} (CP-even eigenstates), and measure the direct CP asymmetry A{sub CP+} = 0.39 {+-} 0.17(stat) {+-} 0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions R{sub CP+} = 1.30 {+-} 0.24(stat) {+-} 0.12(syst). These measurements will improve the determination of the CKM angle {gamma}. They are performed here for the first time using data from hadron collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for supersymmetry in pp collisions at $ \sqrt{s}=13 $ TeV in the single-lepton final state using the sum of masses of large-radius jets

Results are reported from a search for supersymmetric particles in proton-proton collisions in the final state with a single, high transverse momentum lepton, multiple jets, including at least one b-tagged jet, and large missing transverse momentum. The data sample corresponds to an integrated luminosity of 2.3 fb$^{−1}$ at $ \sqrt{s}=13 $ TeV, recorded by the CMS experiment at the LHC. The search focuses on processes leading to high jet multiplicities, such as gluino pair production with $ \tilde{\mathrm{g}}\to \mathrm{t}\overline{\mathrm{t}}{\tilde{\chi}}_1^0 $ . The quantity M$_{J}$ , defined as the sum of the masses of the large-radius jets in the event, is used in conjunction with other kinematic variables to provide discrimination between signal and background and as a key part of the background estimation method. The observed event yields in the signal regions in data are consistent with those expected for standard model backgrounds, estimated from control regions in data. Exclusion limits are obtained for a simplified model corresponding to gluino pair production with three-body decays into top quarks and neutralinos. Gluinos with a mass below 1600 GeV are excluded at a 95% confidence level for scenarios with low $ {\tilde{\chi}}_1^0 $ mass, and neutralinos with a mass below 800 GeV are excluded for a gluino mass of about 1300 GeV. For models with two-body gluino decays producing on-shell top squarks, the excluded region is only weakly sensitive to the top squark mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of branching fraction ratios and CP asymmetries in B{sup {+-}{yields}D}{sub CP}K{sup {+-}}decays in hadron collisions

We reconstruct B{sup {+-}{yields}D}K{sup {+-}}decays in a data sample collected by the CDF II detector at the Tevatron collider corresponding to 1 fb{sup -1} of integrated luminosity. We select decay modes where the D meson decays to either K{sup -{pi}+} (flavor eigenstate) or K{sup -}K{sup +}, {pi}{sup -{pi}+} (CP-even eigenstates), and measure the direct CP asymmetry A{sub CP+}=0.39{+-}0.17(stat){+-}0.04(syst), and the double ratio of CP-even to flavor eigenstate branching fractions R{sub CP+}=1.30{+-}0.24(stat){+-}0.12(syst). These measurements will improve the determination of the Cabibbo-Kobayashi-Maskawa angle {gamma}. They are performed here for the first time using data from hadron collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Characteristics of microcracks in samples from the drill hole Noerdlingen 1973 in the Ries crater, Germany

Samples from the Noerdlingen 1973 drill core contain abundant shock-induced microfractures which exhibit varying amounts of healing and sealing. Many of the microcracks resemble morphologically the open microcracks present in returned lunar samples. Data derived from petrography, scanning electron microscopy, and differential strain analysis indicate that fewer microcracks were formed at greater depths and crack sealing processes are more effective for cracks associated with planar elements. Although the microcracks in the Ries core are now sealed, they are valid analogues of the open shock-induced cracks of lunar rocks and demonstrate that open cracks do form in rocks at depth during a naturally-occurring shock event. The healing of the shock-induced cracks in the Ries core also precludes their use for laboratory measurements of physical properties intended to be used as analogue measurements of lunar samples in situ.

Padovani, E. R.↗

Understanding the Effects of Spaceflight on Head-trunk Coordination during Walking and Obstacle Avoidance

Prolonged exposure to spaceflight conditions results in a battery of physiological changes, some of which contribute to sensorimotor and neurovestibular deficits. Upon return to Earth, functional performance changes are tested using the Functional Task Test (FTT), which includes an obstacle course to observe post‐flight balance and postural stability, specifically during turning. The goal of this study was to quantify changes in movement strategies during turning events by observing the latency between head‐and‐trunk coordinated movements. It was hypothesized that subjects experiencing neurovestibular adaptations would exhibit head‐to‐trunk locking ('en bloc' movement) during turning, exhibited by a decrease in latency between head and trunk movement. FTT data samples were collected from ISS missions. Samples were analyzed three times pre‐exposure, immediately postexposure (1 day post) and 2‐to‐3 times during recovery from the microgravity environment. Two 3D inertial measurements units (XSens MTx) were attached to subjects, one on the head and one on the upper back. This study focused primarily on the yaw movements about the subject's center of rotation. Time differences (latency) between head and trunk movement were calculated at two points on the obstacle course: the first turn to enter the obstacle course (approximately 90⁰ turn) and averaged across a slalom obstacle portion, consisting of three turns (approximately three 90⁰ turns). Preliminary analysis of the data shows a trend toward decreasing head‐to‐trunk movement latency during postflight ambulation in slalom turning after reintroduction to Earth gravity in ISS astronauts. It is clear that changes in movement strategies are adopted during exposure to the microgravity environment and upon reintroduction to a gravity environment. Most ISS subjects exhibit symptoms of neurovestibular changes ('en bloc head and trunk movement) which may impact their ability to perform post‐flight functional tasks.

Madansingh, S.↗

Measurement of CP-Violating Asymmetries In Neutral B Meson Decays Into Three Kaons

The Standard Model (SM) of particle physics successfully describes all of the observed interactions of the fundamental particles (with the exception of non-zero neutrino mass). Despite this enormous success, the SM is widely viewed as an incomplete theory. For example, the size of the asymmetry between matter and antimatter is not nearly large enough to account for the abundance of matter observed throughout the universe. It is thus believed that as-yet-unknown physical phenomena must exist that introduce new asymmetries between matter and antimatter. In this thesis, by studying decays that happen only rarely in the SM, we make measurements of asymmetries between matter and antimatter that are potentially sensitive to the existence of processes beyond the SM. At the PEP-II asymmetric-energy B Factory at SLAC, electrons and positrons are collided at the Υ(4S) resonance to create pairs of B mesons. The BABAR detector is used to measure the subsequent decay products. Using 383 million Υ(4S) → B$\bar{B}$ decays, we study the decay B 0 → K + K - K 0 . In the SM, this decay is dominated by loop amplitudes. Asymmetries between matter and antimatter (CP asymmetries) are extracted by measuring the time-dependence of the complex amplitudes describing the B 0 and $\bar{B}$ 0 decays as functions of their kinematics. The interference between decays with and without the mixing of neutral B mesons allows for the measurement of the angle β eff , which is a measure of CP violation. We also measure the direct CP asymmetry A CP . Data samples reconstructed from three K 0 modes (K S 0 → π + π - , K S 0 → π 0 π 0 , and K L 0 ) are fit simultaneously. They find A CP = -0.015 ± 0.077 ± 0.053 and β eff = 0.352 ± 0.076 ± 0.026 rad, corresponding to a CP violation significance of 4.8σ. A second solution near π/2-β eff is disfavored with a significance of 4.5σ. In a subsequent fit to the region with m K + K - > 1.1 GeV/c 2 , they find A CP = -0.054 ± 0.102 ± 0.060 and β eff = 0.436 ± 0.087 -0.031 +0.055 rad, excluding the possibility that β eff = 0 at 5.1σ. They use the data with m sub K + K - < 1.1 GeV/c 2 to extract Cp asymmetries separately for B 0 decays to Φ(1020)K 0 and f 0 (980)K 0 , finding β eff, Φ = 0.11 ± 0.14 ± 0.06 and β eff ,f 0 = 0.14 ± 0.15 ± 0.05.

43 PARTICLE ACCELERATORS↗

Measurements of Normalized Differential Cross Sections of Inclusive η Production in e + e − Annihilation at Energy from 2.0000 to 3.6710 GeV

Using data samples collected with the BESIII detector operating at the BEPCII storage ring, the cross section of the inclusive process e + e − → η + X , normalized by the total cross section of e + e − → hadrons , is measured at eight center-of-mass energy points from 2.0000 to 3.6710 GeV. These are the first measurements with momentum dependence in this energy region. Our measurement shows a significant discrepancy compared to the existing fragmentation functions. To address this discrepancy, a new QCD analysis is performed at the next-to-next-to-leading order with hadron mass corrections and higher twist effects, which can explain both the established high-energy data and our measurements reasonably well. Published by the American Physical Society 2024

Physics↗

Revised Thickness of the Lunar Crust from GRAIL Data: Implications for Lunar Bulk Composition

High-resolution gravity data from GRAIL have yielded new estimates of the bulk density and thickness of the lunar crust. The bulk density of the highlands crust is 2550 kg m-3. From a comparison with crustal composition measured remotely, this density implies a mean porosity of 12%. With this bulk density and constraints from the Apollo seismic experiment, the average global crustal thickness is found to lie between 34 and 43 km, a value 10 to 20 km less than several previous estimates. Crustal thickness is a central parameter in estimating bulk lunar composition. Estimates of the concentrations of refractory elements in the Moon from heat flow, remote sensing and sample data, and geophysical data fall into two categories: those with refractory element abundances enriched by 50% or more relative to Earth, and those with abundances the same as Earth. Settling this issue has implications for processes operating during lunar formation. The crustal thickness resulting from analysis of GRAIL data is less than several previous estimates. We show here that a refractory-enriched Moon is not required

Taylor, G. Jeffrey↗

Measurement of CP violating asymmetries in B{sup 0{yields}}K{sup +}K{sup -}K{sub S}{sup 0} decays with a time-dependent Dalitz approach

We report a measurement of CP violating asymmetries in B{sup 0}(B{sup 0}){yields}K{sup +}K{sup -}K{sub S}{sup 0} decays with a time-dependent Dalitz approach. This analysis is based on a data sample of 657x10{sup 6} BB pairs accumulated at the {Upsilon}(4S) resonance with the Belle detector at the KEKB asymmetric-energy e{sup +}e{sup -} collider. As the result of an unbinned maximum likelihood fit to the selected candidates, the mixing-induced and direct CP violation parameters {phi}{sub 1}{sup eff} and A{sub CP} are obtained for B{sup 0{yields}{phi}}(1020)K{sub S}{sup 0}, B{sup 0{yields}}f{sub 0}(980)K{sub S}{sup 0}, and other B{sup 0{yields}}K{sup +}K{sup -}K{sub S}{sup 0} decays. We find four solutions that describe the data. There are {phi}{sub 1}{sup eff}(B{sup 0{yields}{phi}}(1020)K{sub S}{sup 0})=(32.2{+-}9.0{+-}2.6{+-}1.4) deg.; {phi}{sub 1}{sup eff}(B{sup 0{yields}{phi}}(1020)K{sub S}{sup 0})=(26.2{+-}8.8{+-}2.7{+-}1.2) deg.; {phi}{sub 1}{sup eff}(B{sup 0{yields}{phi}}(1020)K{sub S}{sup 0})=(27.3{+-}8.6{+-}2.8{+-}1.3) deg.; and {phi}{sub 1}{sup eff}(B{sup 0{yields}{phi}}(1020)K{sub S}{sup 0})=(24.3{+-}8.0{+-}2.9{+-}5.2) deg. The values for the CP violating phase in B{sup 0{yields}{phi}}(1020)K{sub S}{sup 0} are similar, but other properties of the Dalitz plot are quite different for the four solutions. These four solutions have consistent {phi}{sub 1}{sup eff} values for all three B-meson decay channels and none of them deviates significantly from the values measured in B{yields}(cc)K{sup 0} decays with the currently available statistics. In addition, we find no significant direct CP violation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heavy Flavor Physics at the sPHENIX Experiment

The sPHENIX experiment is a state-of-the-art jet and heavy flavor physics detector, which successfully recorded its first Au + Au collision data at 200 GeV at the Relativistic Heavy Ion Collider (RHIC). sPHENIX will provide heavy flavor physics measurements at RHIC, covering an unexplored kinematic region and unprecedented precision, to probe the parton energy loss mechanism, parton transport coefficients in quark–gluon plasma, and the hadronization process under various medium conditions. At the center of sPHENIX, the monolithic active pixel sensor (MAPS)-based VerTeX detector (MVTX) is a high-precision silicon pixel detector. The MVTX provides excellent position resolution and the capability of operating in continuous streaming readout mode, allowing precise vertex determination and recording a large data sample, both of which are particularly crucial for heavy flavor physics measurements. In this work, we will show the general performance of heavy-flavor hadron reconstruction. In addition, we will discuss the commissioning experience with sPHENIX. Finally, we will provide the projection of b-hadron and jet observables and discuss the estimated constraints on theoretical models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cosmogenic Production of Be-7 and Be-10 in Water Targets

We have measured Be-10(t(sub 1/2) = 1.5 x 10(exp 6) years) and Be-7 (t(sub 1/2) = 53.28 days) concentrations in water targets exposed for 1 to 2 years at Echo Lake, Colorado (elevation = 3246 m) and at La Jolla, California (140 m). Neutron monitor data were used to normalize the measured concentrations in order to calculate production rates equivalent to the cosmic ray flux averaged over four solar cycles (43 years). The Be-7 production rates thus obtained correspond to 6.03 +/- 0.07 x 10(exp -6) atom/g.O/s at Echo Lake and 5.06 +/- 0.20 x 10(exp -7) atom/g.O/ s at La Jolla. The Be-10 production rates correspond to 3.14 +/- 0.18 x 10(exp -6) atom/g.O/s at Echo Lake and 2.68 +/- 0.47 x 10(exp -7) atom/g.O/s at La Jolla. When compared with Be-10 production rates determined in Be-10-saturated rocks from the Antarctic and with theoretical calculations based on meteorite and lunar sample data, we find that the million-year average production rate is about 14 - 17% greater than the present production rate averaged over the last four solar cycles. Comparison with production rates determined by measuring glacially polished rocks from the Sierra Nevada in California indicates that average production (based on a revised 13,000-year deglaciation age and a geographic latitude correction) is a about 11% greater than the average over the last four solar cycles. The measured Be-10/Be-7 production ratio in oxygen is 0.52 +/- 0.03 at Echo Lake and 0.55 +/- 0.07 at La Jolla.

Nishiizumi, K.↗

Hanford Tank Vapors in Worker Breathing Zones - Source, Dispersion, and Receptor Data - 20373

A wide range of organic and inorganic chemicals from historical Hanford Site processes are now stored in 177 underground storage tanks at the Hanford tank farms. Workers at the Hanford tank farms have expressed concerns about chemical vapor exposures for many years. During the spring of 2014, worker reports of chemical odors and/or symptoms prompted the development of the Savannah River National Laboratory Hanford Tank Vapor Assessment Team (TVAT) and their resulting independent assessment and recommendations concerning tank farm worker reports of vapors. The Tank Vapor Assessment report included a hypothesis that 'vapors coming out of tanks in high concentration (bolus) plumes sporadically intersected with the breathing zones of workers, resulting in brief but intense exposures to some workers.' The focus of this effort is to present current knowledge to describe the mechanisms by which workers may experience short duration vapor concentrations above background in the tank farms environment. The TVAT hypothesis that workers have experienced concentrations approaching 80% of the tank headspace up to 3 meters (10 feet) from tank sources is not supported by sampling data or modeling results. Modeling indicates that concentrations are quickly reduced from the source, and that the upper end of predicted concentrations at worker breathing zones are a factor of 10 or more lower than source concentrations. Area measurements corroborate the fact that worker breathing zone concentrations are 10 to 100 times lower than source concentrations, and events with elevated concentrations are rare. These reduced vapor concentration levels may result in detectable odors or irritation, depending on a worker's specific odor threshold and sensitivity to the chemical species. Short-duration vapor events may be mitigated by evaluating daily atmospheric conditions in conjunction with planned tank farm activities. Monitoring changing conditions related to tank vapors concentrations at the source and within worker breathing zone is also an important step to protect workers from short duration elevated concentration events. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗