SEARCH · Engineering Papers

Results for “Remote Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

All sources NASA NTRS DOE OSTI

NASA NTRS2006

Development of a Forced Oscillation System for Measuring Dynamic Derivatives of Fluidic Vehicles

A new Forced Oscillation System (FOS) has been designed and built at NASA Langley Research Center that provides new capabilities for aerodynamic researchers to investigate the dynamic derivatives of vehicle configurations. Test vehicles may include high performance and general aviation aircraft, re-entry spacecraft, submarines and other fluidic vehicles. The measured data from forced oscillation testing is used in damping characteristic studies and in simulation databases for control algorithm development and performance analyses. The newly developed FOS hardware provides new flexibility for conducting dynamic derivative studies. The design is based on a tracking principle where a desired motion profile is achieved via a fast closed-loop positional controller. The motion profile for the tracking system is numerically generated and thus not limited to sinusoidal motion. This approach permits non-traditional profiles such as constant velocity and Schroeder sweeps. Also, the new system permits changes in profile parameters including nominal offset angle, waveform, and associated parameters such as amplitude and frequency. Most importantly, the changes may be made remotely without halting the FOS and the tunnel. System requirements, system analysis, and the resulting design are addressed for a new FOS in the 12-Foot Low-Speed Wind Tunnel (LSWT). The overall system including mechanical, electrical, and control subsystems is described. The design is complete, and the FOS has been built and installed in the 12-Foot LSWT. System integration and testing have verified design intent and safe operation. Currently it is being validated for wind-tunnel operations and aerodynamic testing. The system is a potential major enhancement to forced oscillation studies. The productivity gain from the motion profile automation will shorten the testing cycles needed for control surface and aircraft control algorithm development. The new motion capabilities also will serve as a test bed for researchers to study and to improve and/or alter future forced oscillation testing techniques.

Trieu, B. C.↗

NASA NTRS1996

Improving Conceptual Design for Launch Vehicles

This report summarizes activities performed during the second year of a three year cooperative agreement between NASA - Langley Research Center and Georgia Tech. Year 1 of the project resulted in the creation of a new Cost and Business Assessment Model (CABAM) for estimating the economic performance of advanced reusable launch vehicles including non-recurring costs, recurring costs, and revenue. The current year (second year) activities were focused on the evaluation of automated, collaborative design frameworks (computation architectures or computational frameworks) for automating the design process in advanced space vehicle design. Consistent with NASA's new thrust area in developing and understanding Intelligent Synthesis Environments (ISE), the goals of this year's research efforts were to develop and apply computer integration techniques and near-term computational frameworks for conducting advanced space vehicle design. NASA - Langley (VAB) has taken a lead role in developing a web-based computing architectures within which the designer can interact with disciplinary analysis tools through a flexible web interface. The advantages of this approach are, 1) flexible access to the designer interface through a simple web browser (e.g. Netscape Navigator), 2) ability to include existing 'legacy' codes, and 3) ability to include distributed analysis tools running on remote computers. To date, VAB's internal emphasis has been on developing this test system for the planetary entry mission under the joint Integrated Design System (IDS) program with NASA - Ames and JPL. Georgia Tech's complementary goals this year were to: 1) Examine an alternate 'custom' computational architecture for the three-discipline IDS planetary entry problem to assess the advantages and disadvantages relative to the web-based approach.and 2) Develop and examine a web-based interface and framework for a typical launch vehicle design problem.

John R. Olds↗

NASA NTRS1993

VPU(tm) demonstration mission vicinity processor unit(tm) overview

Evolving Technologies Corporation is designing a new type of computer called a Vicinity Processor Unit (VPU). The VPU is designed to monitor and control payloads using an operating system, control process and software environment that specifically takes into account the time delay associated with remotely controlling and monitoring a group of payloads in real time. This is a fundamentally different way of computing which has vast scientific implications for the design and implementation of data processing systems for future space flight missions. As a demonstration mission, the VPU is expected to be flown aboard the Space Shuttle (Payload Identification No. G-700) as a part of NASA's Small Self-Contained Payloads (SSCP) Program. We believe this mission can greatly facilitate the development and validation of technology which may prove to be mission critical for many future space flight missions.

Abdulezer, Loren↗

NASA NTRS1990

Architectural study of the design and operation of advanced force feedback manual controllers

A teleoperator system consists of a manual controller, control hardware/software, and a remote manipulator. It was employed in either hazardous or unstructured, and/or remote environments. In teleoperation, the main-in-the-loop is the central concept that brings human intelligence to the teleoperator system. When teleoperation involves contact with an uncertain environment, providing the feeling of telepresence to the human operator is one of desired characteristics of the teleoperator system. Unfortunately, most available manual controllers in bilateral or force-reflecting teleoperator systems can be characterized by their bulky size, high costs, or lack of smoothness and transparency, and elementary architectures. To investigate other alternatives, a force-reflecting, 3 degree of freedom (dof) spherical manual controller is designed, analyzed, and implemented as a test bed demonstration in this research effort. To achieve an improved level of design to meet criteria such as compactness, portability, and a somewhat enhanced force-reflecting capability, the demonstration manual controller employs high gear-ratio reducers. To reduce the effects of the inertia and friction on the system, various force control strategies are applied and their performance investigated. The spherical manual controller uses a parallel geometry to minimize inertial and gravitational effects on its primary task of transparent information transfer. As an alternative to the spherical 3-dof manual controller, a new conceptual (or parallel) spherical 3-dof module is introduced with a full kinematic analysis. Also, the resulting kinematic properties are compared to those of other typical spherical 3-dof systems. The conceptual design of a parallel 6-dof manual controller and its kinematic analysis is presented. This 6-dof manual controller is similar to the Stewart Platform with the actuators located on the base to minimize the dynamic effects. Finally, a combination of the new 3-dof and 6-dof concepts is presented as a feasible test-bed for enhanced performance in a 9-dof system.

Tesar, Delbert↗

NASA NTRS2003

Delay/Doppler-Mapping GPS-Reflection Remote-Sensing System

A radio receiver system that features enhanced capabilities for remote sensing by use of reflected Global Positioning System (GPS) signals has been developed. This system was designed primarily for ocean altimetry, but can also be used for scatterometry and bistatic synthetic-aperture radar imaging. Moreover, it could readily be adapted to utilize navigation-satellite systems other than the GPS, including the Russian Global Navigation Satellite System GLONASS) and the proposed European Galileo system. This remote-sensing system offers both advantages and disadvantages over traditional radar altimeters: One advantage of GPS-reflection systems is that they cost less because there is no need to transmit signals. Another advantage is that there are more simultaneous measurement opportunities - one for each GPS satellite in view. The primary disadvantage is that in comparison with radar signals, GPS signals are weaker, necessitating larger antennas and/or longer observations. This GPS-reflection remote-sensing system was tested in aircraft and made to record and process both (1) signals coming directly from GPS satellites by means of an upward-looking antenna and (2) GPS signals reflected from the ground by means of a downward-looking antenna. In addition to performing conventional GPS processing, the system records raw signals for postprocessing as required.

Lowe, Stephen↗

NASA NTRS1991

An experiment in remote manufacturing using the advanced communications technology satellite

The goal of the completed project was to develop an experiment in remote manufacturing that would use the capabilities of the ACTS satellite. A set of possible experiments that could be performed using the Advanced Communications Technology Satellite (ACTS), and which would perform remote manufacturing using a laser cutter and an integrated circuit testing machine are described in detail. The proposed design is shown to be a feasible solution to the offered problem and it takes into consideration the constraints that were placed on the experiment. In addition, we have developed two more experiments that are included in this report: backup of rural telecommunication networks, and remote use of Synthetic Aperture Radar (SAR) data analysis for on-site collection of glacier scattering data in the Antarctic.

Tsatsoulis, Costas↗

NASA NTRS2015

Mars OASIS (Mars Operational Agricultural System for In-Situ Specialization) System Reference Manual

In order to enable long term habitation on planetary surfaces, a means of sustainable food production must be developed. Addressing this need for surface habitats on Mars, the MarsOASIS team has developed a concept for a Martian surface greenhouse for unmanned crop production research as a proof of concept for larger scale food production facilities for manned surface missions. Utilizing in-situ resources such as the Martian atmosphere, sunlight, and UV-C radiation, the greenhouse aims to provide a sustainable method of long-term food production requiring minimal consumable resources. The MarsOASIS system is capable of growing a full life cycle of Outredgeous lettuce with its autonomous control system designed for a unmanned environment, only requiring teleoperation in extreme circumstances. A reduced-scope prototype of MarsOASIS is being developed to test technologies such as a natural/artificial hybrid lighting system, a closed water recycling system, remote teleoperation, and fully autonomous monitoring and control of the greenhouse. The prototype is currently in the final stages of design, with a full demonstration of plant life cycle testing set to occur in summer 2015. Results from this prototype demonstration will help quantify the feasibility of the innovative approaches seen in the MarsOASIS design.

Asa Darnell↗

NASA NTRS1995

The Design and Implementation of NASA's Advanced Flight Computing Module

This paper describes a working flight computer Multichip Module developed jointly by JPL and TRW under their respective research programs in a collaborative fashion. The MCM is fabricated by nCHIP and is packaged within a 2 by 4 inch Al package from Coors. This flight computer module is one of three modules under development by NASA's Advanced Flight Computer (AFC) program. Further development of the Mass Memory and the programmable I/O MCM modules will follow. The three building block modules will then be stacked into a 3D MCM configuration. The mass and volume of the flight computer MCM achieved at 89 grams and 1.5 cubic inches respectively, represent a major enabling technology for future deep space as well as commercial remote sensing applications.

computer design space applications multichip modul↗

DOE OSTI2026

A Concept of a Convection–Cloud Chamber to Study Aerosol–Cloud–Drizzle Interactions

Understanding and quantifying the full chain of processes from aerosol activation to drizzle formation, and the associated feedbacks to the aerosol chemical and physical properties, all within a turbulent cloud are some of the toughest challenges in atmospheric chemistry and physics and are keys to the cloud–precipitation puzzle. This paper describes a concept for a new type of research facility consisting of a cloud chamber plus associated instrumentation and computational models, to explore aerosol–cloud interactions and processing, cloud optical properties, entrainment–cloud interactions, and quantitative assessment of drizzle onset. The envisioned design is for a 3 m × 3 m × 9 m chamber, such that the height is sufficient to achieve long lifetimes for aerosol processing and for significant drizzle growth by collision and coalescence. A suite of computational tools for simulating microphysical properties in the chamber provides a digital twin for designing the chamber and a range of example experiments. Theory and test results from novel remote sensing systems for exploring chemical and physical interactions and evolution of aerosols, cloud droplets, and drizzle within turbulent clouds are described. Testing of technology needed for the operation of a large-volume chamber, including aerosol generation methods and novel materials for water vapor boundary conditions, is described. Simulations suggest that spatially uniform turbulence and microphysical properties can be sustained in a steady state, with reasonable aerosol and water vapor fluxes, and that substantial drizzle can be produced through collision and coalescence of cloud droplets. Remaining challenges for more detailed engineering design and a discussion of possible first-light experiments are described.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1985

Development of an energy absorbing passenger seat for the B-720 test aircraft

An evaluation is made of the experimental results obtained in the 720B airliner flight crash testing of an energy-absorbing passenger seat design, which has been derived through modification of a standard three-passenger commercial aviation seat. The highly instrumented 720B aircraft was crashed at the end of a remotely controlled flight on a specially prepared, gravel-covered ground site. In order to limit acceleration upon impact, the seat tested had been designed and fabricated to collapse under a controlled load. The aircraft impact's shock pulse is absorbed by tubes which crush under load as axial columns.

Eichelberger, C. P.↗

NASA NTRS1984

Spatial information technologies for remote sensing today and tomorrow; Proceedings of the Ninth Pecora Symposium, Sioux Falls, SD, October 2-4, 1984

Topics discussed at the symposium include hardware, geographic information system (GIS) implementation, processing remotely sensed data, spatial data structures, and NASA programs in remote sensing information systems. Attention is also given GIS applications, advanced techniques, artificial intelligence, graphics, spatial navigation, and classification. Papers are included on the design of computer software for geographic image processing, concepts for a global resource information system, algorithm development for spatial operators, and an application of expert systems technology to remotely sensed image analysis.

Source record↗

NASA NTRS2018

Remote Sensing, Uncertainty Quantification, and a Theory of Data Systems; Workshop Report

The purpose of the workshop was to invite statisticians, applied mathematicians, computer scientists, data system architects, experts in remote sensing technology, and Climate and Earth System scientists to review, discuss, and plan research on issues related to large-scale, efficient analysis of distributed data using spatial statistical methods. Our motivation in organizing this event was to catalyze interchange among experts on the fast-emerging problem of analysis of distributed data. As part of SAMSI's 2017-2018 Program on Mathematical and Statistical Methods for Climate and the Earth System, a Working Group on Remote Sensing was established to address statistical and mathematical research problems in the analysis of remote sensing data. The Working Group has five subgroups: 1) Spatial Retrieval Methodology (the so-called \Spatial-X" subgroup); 2) Spatial Analysis for Hyperspectral Data (the so-called \Spatial-Y" subgroup); 3) Emulators for Complex Forward Models; 4) Optimization for Remote Sensing Retrievals; and 5) Theory of Data Systems (ToDS). The ToDS subgroup spent the first half of this academic year formulating a framework in which to consider the joint problem of a) optimizing statistical methods for environments where data are distributed and too large to move to a central location, and b) the design of data system infrastructures within which to implement those statistical methods. To x ideas, the Workshop focused on spatial statistical methods. To date there are many new spatial statistical methods designed with massive data sets in mind, in the literature. However, very few have been implemented for remote sensing data, and none have been implemented in operational settings like those used by NASA and NOAA. A major impediment to their use in these cases is that the data are not only massive, but are stored in different physical locations. These data must be brought together in some way in order to estimate spatial covariance functions, but moving data to a central location for analysis is tedious at best and impossible at worst. Some remote data reduction is almost certainly necessary, but how much? What are the consequences for inference? The fundamental issue underlying these questions is how to navigate the trade-space between costs and uncertainty in the estimates or inferences that are ultimately produced.

Braverman, Amy↗

DOE OSTI2022

Wind Turbine Drivetrain Reliability [Slides]

Pitch bearings, main bearings, and gearboxes in conventional wind turbine drivetrains often do not meet their 20-year minimum specified lifetime, resulting in turbine downtime as well as expensive, time-consuming repairs or replacements. The dominant failure modes of the drivetrain components and the conditions that lead to their failure are not fully accounted for during product design or routinely modeled for life management. Drivetrain reliability improvements and O&M cost reductions remain top priorities for both land-based and offshore wind turbines, especially as wind turbines continue to be deployed in increasingly remote and offshore locations, continue to increase in size, and are becoming expected to be in service beyond their original design life, all of which correspond to an increase in the impact of any reliability issues on O&M costs. This presentation summarizes the most recent activities by NREL and ANL on drivetrain reliability.

17 WIND ENERGY↗

DOE OSTI2022

Drivetrain Reliability Collaborative Update

bearing↗

NASA NTRS1973

Study of the marine environment of the northern Gulf of California

The author has identified the following significant results. Results of studies of the oceanography of the northern Gulf of California (Mexico) are reported. A remote, instrumented buoy measuring and telemetering oceanographic data by ERTS-1 satellite was designed, constructed, deployed, and tested. Regular cruises by a research ship on a pattern of 47 oceanographic stations collected data which are analyzed and referenced to analysis of ERTS-1 satellite imagery. A thermal dynamic model of current patterns in the northern Gulf of California is proposed. Findings are examined in relation to the model.

Hendrickson, J. R.↗

NASA NTRS1974

Oblique Wing Remotely Piloted Research Aircraft. Volume 1: Development

The NASA Ames/DSI oblique wing remotely piloted research aircraft is a highly unusual, variable remotely piloted vehicle whose configuration and capabilities are the result of certain initial design guidelines that, in terms of conventional aircraft structures and configurations, would be considered to be contradictory and unachievable. Accordingly, the novel design of the yawed wing RPV is at odds in many respects with conventional aircraft practice. Novelty, then, forms the first, unwritten, design guideline. This design is intended to move away from convention in geometry, structure, and materials. The specific guidelines followed in the design of the yawed wing RPV and a short discussion of the impact of each on the configuration of the vehicle are presented.

Source record↗

NASA NTRS1977

Robots and manipulator systems; Proceedings of the Second Conference on Remotely Manned Systems, Los Angeles, Calif., June 9-11, 1975

Attention is given to supervisory control of remote manipulation, an automatic device for measuring viscoelasticity, adaptable programmable assembly systems for teleoperator applications, and proximity sensor technology for manipulator end effectors. Also considered are control and stability problems of remote orbital capture, orbital servicing and remotely manned systems, gray-level transformations for interactive image enhancement, and the design of a three-fingered hand

Heer, E.↗

NASA NTRS1979

Hydrazine monopropellant reciprocating engine development

A hydrazine fueled piston engine for providing 11.2 kW was developed to satisfy the need for an efficient power supply in the range from 3.7 to 74.6 kW where existing nonair-breathing power supplies such as fuel cells or turbines are inappropriate. The engine was developed for an aircraft to fly to 21.3 km and above and cruise for extended periods. A remotely piloted aircraft and the associated flight control techniques for this application were designed. The engine is geared down internally (2:1) to accommodate a 1.8 m diameter propeller. An alternator is included to provide electrical power. The pusher-type engine is mounted onto the aft closure of the fuel tank, which also provides mounting for all other propulsion equipment. About 20 hrs of run time demonstrated good efficiency and adequate life. One flight test to 6.1 km was made using the engine with a small fixed-pitch four-bladed propeller. The test was successful in demonstrating operational characteristics and future potential.

Akkerman, J. W.↗