Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pattern Factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Accuracy of Acuros XB and AAA dose calculation for small fields with reference to RapidArc stereotactic treatments

Purpose: To assess the accuracy against measurements of two photon dose calculation algorithms (Acuros XB and the Anisotropic Analytical algorithm AAA) for small fields usable in stereotactic treatments with particular focus on RapidArc. Methods: Acuros XB and AAA were configured for stereotactic use. Baseline accuracy was assessed on small jaw-collimated open fields for different values for the spot sizes parameter in the beam data: 0.0, 0.5, 1, and 2 mm. Data were calculated with a grid of 1 x 1 mm{sup 2}. Investigated fields were: 3 x 3, 2 x 2, 1 x 1, and 0.8 x 0.8 cm{sup 2} with a 6 MV photon beam generated from a Clinac2100iX (Varian, Palo Alto, CA). Profiles, PDD, and output factors were measured in water with a PTW diamond detector (detector size: 4 mm{sup 2}, thickness 0.4 mm) and compared to calculations. Four RapidArc test plans were optimized, calculated and delivered with jaw settings J3 x 3, J2 x 2, and J1 x 1 cm{sup 2}, the last was optimized twice to generate high (H) and low (L) modulation patterns. Each plan consisted of one partial arc (gantry 110 deg. to 250 deg.), and collimator 45 deg. Dose to isocenter was measured in a PTW Octavius phantom and compared to calculations. 2D measurements were performed by means of portal dosimetry with the GLAaS method developed at authors' institute. Analysis was performed with gamma pass-fail test with 3% dose difference and 2 mm distance to agreement thresholds. Results: Open square fields: penumbrae from open field profiles were in good agreement with diamond measurements for 1 mm spot size setting for Acuros XB, and between 0.5 and 1 mm for AAA. Maximum MU difference between calculations and measurements was 1.7% for Acuros XB (0.2% for fields greater than 1 x 1 cm{sup 2}) with 0.5 or 1 mm spot size. Agreement for AAA was within 0.7% (2.8%) for 0.5 (1 mm) spot size. RapidArc plans: doses were evaluated in a 4 mm diameter structure at isocenter and computed values differed from measurements by 0.0, -0.2, 5.5, and -3.4% for Acuros XB calculations (1 mm spot size), and of -0.1, 0.3, 6.7, and -1.2% for AAA, respectively for J3 x 3, J2 x 2, J1 x 1H, J1 x 1L RapidArc plans. Gamma Agreement Index from 2D dose analysis was higher than 95% for J3 x 3 and J2 x 2 plans, being around 80% for J1 x 1 maps. Sensitivity with respect to the dosimetric leaf gap and transmission factor MLC parameters was evaluated in the four RapidArc plans, showing the need to properly set the dosimetric leaf gap for accurate calculations. Conclusions: Acuros XB and AAA showed acceptable characteristics for stereotactic small fields if adequate tuning of configuration parameters is performed. Dose calculated for RapidArc stereotactic plans showed an acceptable agreement against point and 2D measurements. Both algorithms can therefore be considered safely applicable to stereotactic treatments.

61 RADIATION PROTECTION AND DOSIMETRY↗

Moisture Absorbing and Water Self‐Releasing from Hybrid Hydrogel Desiccants

Abstract Atmospheric moisture is a valuable resource for fresh water and potentially sustainable energy. However, direct harvesting water from moisture (the vapor form) remains the most challenging. Hybrid desiccants made from hydrogels embedded with salt offer promise in absorbing moisture. However, the desorption process often requires additional energy to heat the samples. Here, poly(acrylic acid) (PAA) hydrogels embedded with lithium chloride are prepared, demonstratng simultaneous moisture absorption and self‐release of liquid water at room temperature with 50–90% relative humidity. The water self‐releasing process can be separated into two distinct stages: 1) surface release, where water droplets grow on the hydrogel surface due to differences in nucleation and diffusion rates, and 2) bulk release, triggered by the collapse of polymer chains, subsequently releasing water from the hydrogel network. Factors such as salt concentration, hydrogel crosslinking density, and film thickness are investigated to better understand the moisture absorption and water‐releasing processes. Moreover, hydrophobic domains are introduced onto the salt‐embedded PAA films, creating an edge effect that enhances the droplet growth rates. When the hydrophobic domains are patterned, the movement of released water can be guided, resulting in a threefold increase in water removal rate attributed to gravitational force.

Chemistry↗

Going off topics to demix quark and gluon jets in α S extractions

Quantum chromodynamics is the theory of the strong interaction between quarks and gluons; the coupling strength of the interaction, α S , is the least precisely-known of all interactions in nature. An extraction of the strong coupling from the radiation pattern within jets would provide a complementary approach to conventional extractions from jet production rates and hadronic event shapes, and would be a key achievement of jet substructure at the Large Hadron Collider (LHC). Presently, the relative fraction of quark and gluon jets in a sample is the limiting factor in such extractions, as this fraction is degenerate with the value of αS for the most well-understood observables. To overcome this limitation, we apply recently proposed techniques to statistically demix multiple mixtures of jets and obtain purified quark and gluon distributions based on an operational definiton. We illustrate that studying quark and gluon jet substructure separately can significantly improve the sensitivity of such extractions of the strong coupling. We also discuss how using machine learning techniques or infrared- and collinear-unsafe information can improve the demixing performance without the loss of theoretical control. While theoretical research is required to connect the extract topics with the quark and gluon objects in cross section calculations, our study illustrates the potential of demixing to reduce the dominant uncertainty for the α S extraction from jet substructure at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Deletion analysis of the itaconic acid biosynthesis gene cluster components in Aspergillus pseudoterreus ATCC32359

The filamentous fungus Aspergillus terreus has been successfully used for industrial production of itaconic acid (IA) for many years. The IA biosynthesis pathway has recently been characterized at a molecular genetic level as an IA gene cluster (IA cluster) by a clone-based transcriptomic approach. The cluster consists of four genes, including genes for cis-aconitic acid decarboxylase (cadA), a predicted transcription factor (tf), mitochondrial organic acid transporter (mttA), and MFS (Major Facilitator Superfamily) type transporter (mfsA). In this research, we performed EST (Expressed Sequence Tag) analysis and systematic gene deletions to investigate the role of those genes in IA biosynthesis in A. pseudoterreus ATCC32359. EST analysis showed a similar expression pattern among those four genes that was distinct from neighbouring genes and further confirmed that they belong to the same biosynthesis cluster. Systematic gene deletion analysis demonstrated that tf, cadA, mttA, and mfsA genes in the cluster are essential for IA production. Deletion of any of them will either completely abolish the IA production or dramatically decrease amount of IA produced. More importantly, a significant amount of aconitic acid was detected in the cadA deletion strain but not in the other deletion strains. Therefore, the cadA deletion strain is a novel microorganism host for production of aconitic acid and other value-added chemicals from lignocellulosic biomass.

Deng, Shuang↗

Continuous but diverse advancement of spring-summer phenology in response to climate warming across the Qinghai-Tibetan Plateau

The Qinghai-Tibetan Plateau (QTP) is more vulnerable and sensitive to climate change than many other regions worldwide because of its high altitude, permafrost geography, and harsh physical environment. As a sensitive bio-indicator of climate change, plant phenology shift in this region has been intensively studied during the recent decades, primarily based on satellite-retrieved data. However, great controversy still exists regarding the change in direction and magnitudes of spring-summer phenology. Based on a large number (11,000+ records) of long-term and continuous ground observational data for various plant species, our study intended to more comprehensively assess the changing trends of spring-summer phenology and their relationships with climatic change across the QTP. The results indicated a continuous advancement (–2.69 days decade –1 ) in spring-summer phenology from 1981 to 2011, with an even more rapid advancement during 2000–2011 (–3.13 days decade –1 ), which provided new field evidence for continuous advancement in spring-summer phenology across the QTP. However, diverse advancing rates in spring-summer phenology were observed for different vegetation types, thermal conditions, and seasons. The advancing trends matched well with the difference in sensitivity of spring-summer phenology to increasing temperature, implying that the sensitivity of phenology to temperature was one of the major factors influencing spring-summer phenology shifts. Besides, increased precipitation could advance the spring-summer phenology. As a result, the response of spring-summer phenology to temperature tended to be stronger from east to west across all species, while the response to precipitation showed no consistent spatial pattern.

54 ENVIRONMENTAL SCIENCES↗

Versatile module for experiments with focussing neutron guides

We report the development of a versatile module that permits fast and reliable use of focussing neutron guides under varying scattering angles. A simple procedure for setting up the module and neutron guides is illustrated by typical intensity patterns to highlight operational aspects as well as typical parasitic artefacts. Combining a high-precision alignment table with separate housings for the neutron guides on kinematic mounts, the change-over between neutron guides with different focussing characteristics requires no readjustments of the experimental setup. Exploiting substantial gain factors, we demonstrate the performance of this versatile neutron scattering module in a study of the effects of uniaxial stress on the domain populations in the transverse spin density wave phase of single crystal Cr.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication of model ultrafiltration membranes with uniform, high aspect ratio pores

Here, in this manuscript, we report the facile fabrication of large-area model membranes with highly uniform and high aspect ratio pores with diameters <20 nm. These membranes are useful for fundamental investigations of separation by size exclusion in the ultrafiltration regime, where species to be separated from solution have dimensions of 1–100 nm. Such investigations require membranes with narrow pores and high aspect ratios such that the Hagen–Poiseuille equation is followed, enabling well-known models such as the hindered transport model to be evaluated and other affecting factors to be ignored. We demonstrate that the sub-20 nm pores in the membrane are of sufficiently high aspect ratio such that water flux through the membrane is consistent with the Hagen–Poiseuille equation. The fabrication relies on self-assembling block copolymers to form uniform, densely packed patterns with sub-20 nm resolution, sequential infiltration synthesis to convert the block copolymer in situ into a mask with adequate contrast to etch pores with an aspect ratio >5, and low-resolution photolithography to transfer the pattern over a large area into a silicon nitride membrane. Model membranes with narrow pore-size distribution fabricated in this way provide the means to investigate parameters that impact size-selective ultrafiltration separations such as the relationships between solute or particle size and pore size, their distributions, and rejection profiles, and, therefore, test the validity or limits of separation models.

Chen, Wen↗

Spatial Heterogeneity in Human Activities Favors the Persistence of Wolves in Agroecosystems

As human populations expand, there is increasing demand and pressure for land. Under this scenario, behavioural flexibility and adaptation become important processes leading to the persistence of large carnivores in human-dominated landscapes such as agroecosystems. A growing interest has recently emerged on the outcome of the coexistence between wolves and humans in these systems. It has been suggested that spatial heterogeneity in human activities would be a major environmental factor modulating vulnerability and persistence of this contentious species in agroecosystems. Here, we combined information from 35 den sites detected between 2011 and 2012 in agroecosystems of western Iran (Hamedan province), a set of environmental variables measured at landscape and fine spatial scales, and generalized linear models to identify patterns of den site selection by wolves in a highly-modified agroecosystem. On a landscape level, wolves selected a mixture of rangelands with scattered dry-farms on hillsides (showing a low human use) to locate their dens, avoiding areas with high densities of settlements and primary roads. On a fine spatial scale, wolves primarily excavated dens into the sides of elevated steep-slope hills with availability of water bodies in the vicinity of den sites, and wolves were relegated to dig in places with coarse-soil particles. Our results suggest that vulnerability of wolves in human-dominated landscapes could be compensated by the existence of spatial heterogeneity in human activities. Such heterogeneity would favor wolf persistence in agroecosystems favoring a land sharing model of coexistence between wolves and people.

59 BASIC BIOLOGICAL SCIENCES↗

Restrictive spirometry pattern among construction trade workers

Spirometry-based studies of occupational lung disease have mostly focused on obstructive or mixed obstructive/restrictive outcomes. We wanted to determine if restrictive spirometry pattern (RSP) is associated with occupation and increased mortality. Study participants included 18,145 workers with demographic and smoking data and repeatable spirometry. The mortality analysis cohort included 15,445 workers with known vital status and cause of death through December 31, 2016. Stratified analyses explored RSP prevalence by demographic and clinical variables and trade. Log-binomial regression models explored RSP risk factors while controlling for important confounders such as smoking, obesity, and comorbidities. Cox regression models explored mortality risk by spirometry category. Prevalence of RSP was very high (28.6%). Mortality hazard ratios for RSP were 1.50 for all causes, 1.86 for cardiovascular diseases, 2.31 for respiratory diseases, and 1.66 for lung cancer. All construction trades except painters, machinists, and roofers had significantly elevated risk for RSP compared to our internal reference group. RSP was significantly associated with both parenchymal and pleural changes seen by chest X-ray. Construction trade workers are at significantly increased risk for RSP independent of obesity. Individuals with RSP are at increased risk for all-cause mortality as well as mortality attributable to respiratory diseases, cardiovascular diseases, and lung cancer. RSP deserves greater attention in occupational medicine and epidemiology.

60 APPLIED LIFE SCIENCES↗

Review of thermal comfort infused with the latest big data and modeling progresses in public health

Thermal environment is important for both occupants’ comfort and health. Previously, the impacts of thermal environment were explored in the areas of thermal comfort and public health separately. This paper aims to bridge both disciplines by examining the correlation between comfort temperature and Minimum Mortality Temperature (MMT), which is a key index quantifying the association of health and weather temperature, through literature review and data-driven approach. It was found that the MMT data obtained from the public health area are generally in good agreement with the thermal neutral temperatures from the comfort perspective. The MMT data range from 17.2 °C to 30 °C, which are similar to the thermal neutral temperatures ranging from 19.5 °C to 30 °C based on the global field tests. Moreover, the MMT data demonstrate the potential to capture some complex distribution patterns of the field comfort data. The introduction of the health-temperature data could assist the intensive field experiments and modeling efforts and complement the thermal comfort dataset, which suffers from the problems of limited sample size. Some discrepancies between the two datasets were identified as well. The contextual factors other than the climate factor which may cause such discrepancies, such as socio-economics, population densities, etc. should be analyzed to enable the potential application of the health-temperature data and modeling to thermal comfort and health studies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Hydrodynamics of countercurrent flows in a structured packed column: effects of initial wetting and dynamic contact angle

The structured packed column has gained considerable attention as a prospective technology to mitigate carbon dioxide emissions from thermal power plants. The computational flow investigation of such systems is a multiscale problem, and local hydrodynamics plays a key role in overall column efficiency. Accordingly, multiphase flow studies in the representative elementary unit (REU) of a packed column can offer insights into the local flow behavior such as flow pattern, interfacial area, etc. The interfacial area plays a key role in the overall interphase mass transfer and thereby in separation efficiency. The predicted effective area matches well with corresponding ones in experiments for Mellapak 250.Y packings. The contact angle (i.e., solid substrate behavior) is one of the critical factors that dictates wettings, and thereby the interfacial area. The dynamic contact angle (DCA) was considered in order to explore the effects of contact angle hysteresis on the interfacial area. DCA has more pronounced impact on the interfacial area for a solvent possessing a higher value of surface tension and equilibrium contact angle. The interfacial area shows temporal undulation and does not achieve a pseudo steady state due to the capillary force. In contrary, the interfacial area gets a net value for a solvent having low surface tension value. Further, specification of the static contact angle at the solid substrate shows the least value of the interfacial area. We also extensively studied the effect of the initial sheet condition (dry vs wet) on the interfacial area. The initially wetted sheets show slightly higher value of the interfacial area as compared to the initially dry sheets at a fixed flow rate for a solvent having high surface tension value. Wetting hysteresis decreases with increasing liquid loads. On the other hand, wetting hysteresis does not occur for a solvent having value of low surface tension and equilibrium contact angle.

structured packings, dynamic contact angle, interf↗

Modeling of underexpanded hydrogen jets through square and rectangular slot nozzles

The development and revision of safety codes and standards for hydrogen infrastructure requires a solid scientific basis, including studies of unignited releases from high pressure systems for various scenarios. Most hydrogen releases are modeled as axisymmetric jets, but real leaks are more likely to be non-axisymmetric jets issuing from high aspect ratio cracks or slots. In the present study, underexpanded hydrogen jets from square and rectangular nozzles with aspect ratios of 1 to 16 were numerically modeled for stagnation pressures up to 20 MPa. The near and far flow fields were modeled separately using two sequential computational domains to accurately and efficiently capture the flow characteristics. The numerical models were first validated with experimental data from a previous experimental study and literature data. The mass fraction and velocity distributions show that the centerline decay rates increase as the nozzle aspect ratio increases, but this increase is dependent on the pressure. This means that the canonical decay law of round turbulent jets and plumes no longer applies to the slot nozzle jets for high pressures. The radial profiles collapse onto a Gaussian curve in the minor axis plane, but neither collapse, nor are they Gaussian in the major axis plane with peaks away from the jet centerline. Different shock patterns were identified along the major and minor axes and the axis switching phenomenon seen in the literature was also reproduced. The axis switching resulted in significantly wider flattened concentration distributions compared with the axisymmetric jet which may require consideration during safety analyses for non-circular nozzles. A scaling factor taking both the nozzle shape and pressure effects into account SAND2018-12056J This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. was then devleoped to better scale the centerline decay rates for jets from both the square and rectangular nozzles. The present study demonstrates that the nozzle shape effects on the jet spreading should not be overlooked and proper scaling factors are required to collapse the data and calculate decay rates.

08 HYDROGEN↗

Marine methane cycle simulations for the period of early global warming

Geochemical environments, fates, and effects are modeled for methane released into seawater by the decomposition of climate-sensitive clathrates. A contemporary global background cycle is first constructed, within the framework of the Parallel Ocean Program. Input from organics in the upper thermocline is related to oxygen levels, and microbial consumption is parameterized from available rate measurements. Seepage into bottom layers is then superimposed, representing typical seabed fluid flow. The resulting CH{sub 4} distribution is validated against surface saturation ratios, vertical sections, and slope plume studies. Injections of clathrate-derived methane are explored by distributing a small number of point sources around the Arctic continental shelf, where stocks are extensive and susceptible to instability during the first few decades of global warming. Isolated bottom cells are assigned dissolved gas fluxes from porous-media simulation. Given the present bulk removal pattern, methane does not penetrate far from emission sites. Accumulated effects, however, spread to the regional scale following the modeled current system. Both hypoxification and acidification are documented. Sensitivity studies illustrate a potential for material restrictions to broaden the perturbations, since methanotrophic consumers require nutrients and trace metals. When such factors are considered, methane buildup within the Arctic basin is enhanced. However, freshened polar surface waters act as a barrier to atmospheric transfer, diverting products into the deep return flow. Uncertainties in the logic and calculations are enumerated including those inherent in high-latitude clathrate abundance, buoyant effluent rise through the column, representation of the general circulation, and bacterial growth kinetics.

54 ENVIRONMENTAL SCIENCES↗

The Role of Stratigraphy and Loading History in Generating Complex Compaction Bands in Idealized Field-Scale Settings

The Buckskin Gulch locality in Utah is a landmark example of compaction localization. The outcrop of this locality involves distinct stratigraphic heterogeneity and was exposed to complex loading history. It features multiple sets of deformation bands with different kinematics and orientation. Similar formations were seen in the Valley of Fire, Nevada, and the Orange quarry, France, among other localities. The formation of such complex structures, their propagation mechanisms, and frequency is affected by numerous local and ambient factors whose impacts are not yet fully understood. The simulation of the above-mentioned localities is not feasible because of the limited amount of available information. This work, instead, investigates from a geomechanics standpoint how the interplay among material nonlinearity, outcrop stratigraphy, and loading history interconnects with specific spatiotemporal patterns of compaction band propagation. Our study shows that the system stratigraphy can be responsible for the emergence of coexisting compaction bands with different inclination and kinematics. Specifically, we show that stiffness contrasts induce nonlocal stress changes which may favor the initiation of secondary structures with different compaction localization characteristics. Furthermore, systems of inclined compaction bands induced by burial increase display secondary, noncontemporaneous sets of vertical compaction bands under the effects of postburial shortening. Our results indicate that stages of intermediate burial decrease prior to tectonic shortening can promote the formation of such complex systems. Despite the simplifications involved in our analyses, these findings show how geomechanics computations complement field observations and could provide a mechanics-based validation of site-specific reconstruction hypothesis.

58 GEOSCIENCES↗

A deep learning approach to programmable RNA switches

Engineered RNA elements are programmable tools capable of detecting small molecules, proteins, and nucleic acids. Predicting the behavior of these synthetic biology components remains a challenge, a situation that could be addressed through enhanced pattern recognition from deep learning. Here, we investigate Deep Neural Networks (DNN) to predict toehold switch function as a canonical riboswitch model in synthetic biology. To facilitate DNN training, we synthesize and characterize in vivo a dataset of 91,534 toehold switches spanning 23 viral genomes and 906 human transcription factors. DNNs trained on nucleotide sequences outperform (R 2 = 0.43–0.70) previous state-of-the-art thermodynamic and kinetic models (R 2 = 0.04–0.15) and allow for human-understandable attention-visualizations (VIS4Map) to identify success and failure modes. This work shows that deep learning approaches can be used for functionality predictions and insight generation in RNA synthetic biology.

59 BASIC BIOLOGICAL SCIENCES↗

Theory of hysteresis during electron heating of electromagnetic wave scattering by self-organized dust structures in complex plasmas

Dust structuring is a natural and universal process in complex plasmas. The scattering of electromagnetic waves by dust structures is governed by the factor of coherency, i.e., the total number of coherent electrons in a single structure. In the present paper, we consider how the factor of coherency changes due to additional pulse electron heating and show that it obeys a hysteresis. After the end of the pulse heating, the scattering intensity differs substantially from that before heating. There are three necessary conditions for scattering hysteresis: first, the radiation wavelength should be larger than the pattern (structure) size; second, the total number of coherent electrons confined by the structure should be large; and third, the heating pulse duration should be shorter than the characteristic time of dust structure formation. We present the results of numerical calculations using existing models of self-consistent dust structures with either positively or negatively charged dust grains. It is shown that, depending on the grain charge and the ionization rate, two types of hysteresis are possible: one with a final increase of the scattering and the other with a final decrease of the scattering. It is suggested that the hysteresis of coherent scattering can be used as a tool in laboratory experiments and that it can be a basic mechanism explaining the observed hysteresis in radar scattering by noctilucent clouds during active experiments on electron heating in mesosphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of thermal stability of Cu{sub 2}Se thermoelectric material

Sustainability of thermoelectric parameter in operating temperature range is a key consideration factor for fabricating thermoelectric generator or cooler. In present work, we have studied the stability of thermoelectric parameter of Cu{sub 2}Se within the temperature range of 50-800°C. Temperature dependent Seebeck coefficients and electrical resistivity measurement are performed under three continuous thermal cycles. X-ray diffraction pattern shows the presence of mixed cubic-monoclinic Cu{sub 2}Se phase in bare pellet which transforms to pure α-Cu{sub 2}Se phase with repeating thermal cycle. Significant enhancement in Seebeck coefficient and electrical resistivity is observed which may be attributed to (i) Se loss observed in EDS and (ii) the phase transformation from mixed cubic-monoclinic structure to pure monoclinic α-Cu{sub 2}Se phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamic Phaeodactylum tricornutum exometabolites shape surrounding bacterial communities

Summary Roles of different ecological classes of algal exometabolites in regulating microbial community composition are not well understood. Here, we identify exometabolites from the model diatom Phaeodactylum tricornutum and demonstrate their potential to influence bacterial abundances. We profiled exometabolites across a time course of axenic algal growth using liquid chromatography–tandem mass spectrometry. We then investigated growth of 12 bacterial isolates on individual‐identified exometabolites. Lastly, we compared responses of a P. tricornutum ‐adapted enrichment community to additions of two contrasting metabolites: selective growth substrate 4‐hydroxybenzoic acid and putative signaling/facilitator molecule lumichrome. We identified 50 P. tricornutum metabolites and found distinct temporal accumulation patterns. Two exometabolites (of 12 tested) supported growth of distinct subsets of bacterial isolates. While algal exudates and algal presence drove similar changes in community composition compared with controls, exogenous 4‐hydroxybenzoic acid addition promoted increased abundances of taxa that utilized it in isolation, and also revealed the importance of factors relating to algal presence in regulating community composition. This work demonstrates that secretion of selective bacterial growth substrates represents one mechanism by which algal exometabolites can influence bacterial community composition and illustrates how the algal exometabolome has the potential to modulate bacterial communities as a function of algal growth.

4-hydroxybenzoic acid↗