Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLANTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

US Municipal Desalination Plants

This submission presents results and observations from a series of surveys of US municipal desalination plants conducted during the last 20 years. The surveys were conducted to determine the number, characteristics, and concentrate disposal practices of US desalination plants. Each survey was intended to identify and contact each US plant that produces 25,000 gpd or more. This cutoff eliminated smaller plants that serve truck stops, mobile home parks, hospitals, campgrounds, etc. Succeeding surveys did not undertake to recontact all previously contacted plants but focused primarily on plants built since the initial survey.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

[Growth and development of plants in a row of generations under the conditions of space flight (experiment Greenhouse-5)]

Results of the experiment aimed at harvesting a second space generation of wheat var. Apogee in Mir greenhouse Svet (experiment GREENHOUSE-5) are presented. In space flight, germination rate of space seeds from the first crop made up 89% against 100% of the ground seeds. The full biological ripeness was observed in 20 plants grown from the ground seeds and one plant grown from the space seeds following 80- to 90-d vegetation. The plant of the second space generation was morphologically different neither from the species in the first space crop nor from the ground controls. To study the biological characteristics of Apogee seeds gathered in the first and second crops in spaceflight experiment GREENHOUSE-5, the seeds were planted on their return to the laboratory. Morphometric analysis showed that they were essentially similar to the controls. Hence, the space experiments in Mir greenhouse Svet performed during 1998-1999 gave proof that plants cultivated in microgravity can pass the ontogenetic cycle more than once. However, initial results of the investigations into growth and development of plants through several generations are still in-sufficient to speak of possible delayed effects of the spaceflight factors (microgravity, multicomponent radiation, harmful trace contaminants etc.).

Mir Project↗

Improving Aquatic Plant Management in the California Sacramento-San Joaquin Delta

Management of aquatic weeds in complex watersheds and river systems present many challenges to assessment, planning and implementation of management practices for floating and submerged aquatic invasive plants. The Delta Region Areawide Aquatic Weed Project (DRAAWP), a USDA sponsored area-wide project, is working to enhance planning, decision-making and operational efficiency in the California Sacramento-San Joaquin Delta. Satellite and airborne remote sensing are used map (area coverage and biomass), direct operations, and assess management impacts on plant communities. Archived satellite records going are used to review results from previous climate and management events and aide in developing long-term strategies. Modeling at local and watershed scales provides insight into land-use effects on water quality. Plant growth models informed by remote sensing are being applied spatially across the Delta to balance location and type of aquatic plant, growth response to altered environments, phenology, environmental regulations, and economics in selection of management practices. Initial utilization of remote sensing tools developed for mapping of aquatic invasive weeds improved operational efficiency by focusing limited chemical use to strategic areas with high plant-control impact and incorporating mechanical harvesting when chemical use is restricted. These assessment methods provide a comprehensive and quantitative view of aquatic invasive plants communities in the California Delta, both spatial and temporal, informed by ecological understanding with the objective of improving management and assessment effectiveness.

Aquatic↗

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of enabling manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated SPEs on imbibed seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated SPEs (0, 40, 80 cGy, and 200 cGy), either acutely or at a low dose rate (LDR only for 40 and 80 cGy doses), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Simulated SPE exposure was achieved using sequential exposures to protons with a broad energy range at 50-150 MeV/n. Control and irradiated seeds were planted either onto 0.5% MS-based agar plates containing required nutrients for early seedling analysis, or in peat plugs/pots for 28 day (mizuna and lettuce) and 91 day (tomato) grow outs. All plants were maintained under space-vehicle relevant conditions at 3000 ppm CO2, 50% RH, and 23°C, and a 16/8 h photoperiod with 300 μmol·m(exp -2)·s(exp -1) photosynthetically active radiation. Plant/fruit morphometrics and edible fresh mass were measured. Additionally, nutrient analyses were performed on mizuna and tomato fruit. Seedlings from irradiated seeds (both 40 and 80 cGy) showed significant and dose dependent impacts on cotyledon development and root length. Interestingly, small, but significant changes in vitamin content were found in mizuna and tomato fruits grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated SPEs significantly delayed tomato early seedling development and plant growth, and reduced the quantity of fruits produced from the surviving plants. (This study was supported by NASA Human Research Program.)

J. T. Richards↗

Changes in Plants Developed from Imbibed Seeds Irradiated by Simulated Solar Particle Events

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk primarily from solar particle events (SPEs) and galactic cosmic rays (GCRs). With the goal of manned Mars exploration, the production of fresh food during long duration space missions may provide nutritional supplementation and benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. In this study, we evaluated the effect of simulated SPEs on imbibed seeds of mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated SPEs (0, 40, 80 cGy, and 200 cGy), either acutely or at a low dose rate (LDR only for 40 and 80 cGy doses), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Simulated SPE exposure was achieved using sequential exposures to protons with a broad energy range at 50-150 MeV/n. Control and irradiated seeds were planted either onto 0.5% MS-based agar plates containing required nutrients for early seedling analysis, or in peat plugs/pots for 28 day (mizuna and lettuce) and 91 day (tomato) grow outs. All plants were maintained under space-vehicle relevant controlled environment conditions at 3000 ppm CO2, 50% RH, and 23°C, and a 16/8 h photoperiod with 300 μmol·m-2·s-1 photosynthetically active radiation. Plant/fruit morphometrics and edible fresh mass were measured. In addition, nutrient analyses were performed for both mizuna and ripe tomatoe fruit. Seedlings from irradiated seeds (both 40 cGy and 80 cGy) showed significant changes in cotyledon development, as well as root length. Interestingly, small, but significant changes in vitamin content were found in mizuna and tomato fruits grown from 80 cGy (LDR) irradiated seeds. In addition, 80 cGy (LDR) simulated SPEs significantly affected tomato early seedling development, plant growth, and the quantity of fruits produced from the surviving plants. Generally, compared to 80 cGy, 40 cGy (LDR) of simulated SPEs displayed some impacts to the seeds and seedlings, but to a much lesser degree. (This study was supported by NASA Human Research Program.)

J.T. Richards↗

Open Science for Plants in Space: Data Sharing, Standards, and Informatics for Reuse and Knowledge Discovery

Upcoming deep space missions rely on plants and crops for crew and ecosystem health. Access to space plant data enables scientists to gain a deeper understanding of biological responses to ionizing radiation, altered gravity, low atmospheric pressure, elevated CO2, and altered photoperiods. Open Science is the practice of making research available to all, while respecting diverse cultures, fostering collaborations with equity. 2023 is the ‘Year of Open Science’, and NASA has a 5-year Transform to Open Science (TOPS) mission designed to rapidly transform the agency toward an inclusive culture of open science. NASA’s Open Science Data Repository (OSDR) developed by NASA’s Biological and Physical Sciences Division provides access to data from space-relevant biological experiments. OSDR combines two databases, GeneLab and Ames Life Sciences Data Archive (ALSDA) to maximize access to standardized ‘omics (e.g., transcriptomics, proteomics) and phenotypic data (e.g., microscopy, biomass), respectively. OSDR started in 2014 with the creation of the first space-relevant FAIR (Findable, Accessible, Interoperable, Reusable) biological ‘omics repository (GeneLab), providing detailed metadata on investigation, sample, and assay levels. Today, GeneLab hosts 62 plant datasets which have led to 5 published peer-reviewed meta-analysis publications. Most of these publications were collaboration efforts under the OSDR Analysis Working Groups (AWGs). AWGs provide great opportunities for investigators to collaborate and set new standards for space-relevant data and metadata. The AWGs are welcoming any ASPB members interested in providing plant expertise for space biology. The addition of ALSDA to OSDR is also expanding analysis capability beyond ‘omics. Now is the time to get involved as a Subject Matter Expert as we establish the framework for modern plant data archiving through the AWGs. Investigators are invited to submit their space-relevant plant datasets to OSDR and visit the site to learn about the tools OSDR has to offer (osdr.nasa.gov/bio).

FAIR↗

Optimization Under Uncertainty for Water Consumption in a Pulverized Coal Power Plant

Pulverized coal (PC) power plants are widely recognized as major water consumers whose operability has started to be affected by drought conditions across some regions of the country. Water availability will further restrict the retrofitting of existing PC plants with water-expensive carbon capture technologies. Therefore, national efforts to reduce water withdrawal and consumption have been intensified. Water consumption in PC plants is strongly associated to losses from the cooling water cycle, particularly water evaporation from cooling towers. Accurate estimation of these water losses requires realistic cooling tower models, as well as the inclusion of uncertainties arising from atmospheric conditions. In this work, the cooling tower for a supercritical PC power plant was modeled as a humidification operation and used for optimization under uncertainty. Characterization of the uncertainty (air temperature and humidity) was based on available weather data. Process characteristics including boiler conditions, reactant ratios, and pressure ratios in turbines were calculated to obtain the minimum water consumption under the above mentioned uncertainties. In this study, the calculated conditions predicted up to 12% in reduction in the average water consumption for a 548 MW supercritical PC power plant simulated using Aspen Plus. Optimization under uncertainty for these large-scale PC plants cannot be solved with conventional stochastic programming algorithms because of the computational expenses involved. In this work, we discuss the use of a novel better optimization of nonlinear uncertain systems (BONUS) algorithm which dramatically decreases the computational requirements of the stochastic optimization.

01 COAL, LIGNITE, AND PEAT↗

Optimization under Uncertainty for Water Consumption in a Pulverized Coal Power Plant

Pulverized coal (PC) power plants are widely recognized as major water consumers whose operability has started to be affected by drought conditions across some regions of the country. Water availability will further restrict the retrofitting of existing PC plants with water-expensive carbon capture technologies. Therefore, national efforts to reduce water withdrawal and consumption have been intensified. Water consumption in PC plants is strongly associated to losses from the cooling water cycle, particularly water evaporation from cooling towers. Accurate estimation of these water losses requires realistic cooling tower models, as well as the inclusion of uncertainties arising from atmospheric conditions. In this work, the cooling tower for a supercritical PC power plant was modeled as a humidification operation and used for optimization under uncertainty. Characterization of the uncertainty (air temperature and humidity) was based on available weather data. Process characteristics including boiler conditions, reactant ratios, and pressure ratios in turbines were calculated to obtain the minimum water consumption under the above mentioned uncertainties. In this study, the calculated conditions predicted up to 12% in reduction in the average water consumption for a 548 MW supercritical PC power plant simulated using Aspen Plus. Optimization under uncertainty for these large-scale PC plants cannot be solved with conventional stochastic programming algorithms because of the computational expenses involved. In this work, we discuss the use of a novel better optimization of nonlinear uncertain systems (BONUS) algorithm which dramatically decreases the computational requirements of the stochastic optimization.

01 COAL, LIGNITE, AND PEAT↗

Sensor placement algorithm development to maximize the efficiency of acid gas removal unit for integrated gasification combined cycle (IGCC) power plant with CO{sub 2} capture

Future integrated gasification combined cycle (IGCC) power plants with CO{sub 2} capture will face stricter operational and environmental constraints. Accurate values of relevant states/outputs/disturbances are needed to satisfy these constraints and to maximize the operational efficiency. Unfortunately, a number of these process variables cannot be measured while a number of them can be measured, but have low precision, reliability, or signal-to-noise ratio. In this work, a sensor placement (SP) algorithm is developed for optimal selection of sensor location, number, and type that can maximize the plant efficiency and result in a desired precision of the relevant measured/unmeasured states. In this work, an SP algorithm is developed for an selective, dual-stage Selexol-based acid gas removal (AGR) unit for an IGCC plant with pre-combustion CO{sub 2} capture. A comprehensive nonlinear dynamic model of the AGR unit is developed in Aspen Plus Dynamics® (APD) and used to generate a linear state-space model that is used in the SP algorithm. The SP algorithm is developed with the assumption that an optimal Kalman filter will be implemented in the plant for state and disturbance estimation. The algorithm is developed assuming steady-state Kalman filtering and steady-state operation of the plant. The control system is considered to operate based on the estimated states and thereby, captures the effects of the SP algorithm on the overall plant efficiency. The optimization problem is solved by Genetic Algorithm (GA) considering both linear and nonlinear equality and inequality constraints. Due to the very large number of candidate sets available for sensor placement and because of the long time that it takes to solve the constrained optimization problem that includes more than 1000 states, solution of this problem is computationally expensive. For reducing the computation time, parallel computing is performed using the Distributed Computing Server (DCS®) and the Parallel Computing® toolbox from Mathworks®. In this presentation, we will share our experience in setting up parallel computing using GA in the MATLAB® environment and present the overall approach for achieving higher computational efficiency in this framework.

20 FOSSIL-FUELED POWER PLANTS↗

Dynamic simulation and load-following control of an integrated gasification combined cycle (IGCC) power plant with CO{sub 2} capture

Load-following control of future integrated gasification combined cycle (IGCC) plants with pre-combustion CO{sub 2} capture is expected to be far more challenging as electricity produced by renewable energy is connected to the grid and strict environmental limits become mandatory requirements. To study control performance during load following, a plant-wide dynamic simulation of a coal-fed IGCC plant with CO{sub 2} capture has been developed. The slurry-fed gasifier is a single-stage, downward-fired, oxygen-blown, entrained-flow type with a radiant syngas cooler (RSC). The syngas from the outlet of the RSC goes to a scrubber followed by a two-stage sour shift process with inter-stage cooling. The acid gas removal (AGR) process is a dual-stage physical solvent-based process for selective removal of H{sub 2}S in the first stage and CO{sub 2} in the second stage. Sulfur is recovered using a Claus unit with tail gas recycle to the AGR. The recovered CO{sub 2} is compressed by a split-shaft multistage compressor and sent for sequestration after being treated in an absorber with triethylene glycol for dehydration. The clean syngas is sent to two advanced “F”-class gas turbines (GTs) partially integrated with an elevated-pressure air separation unit. A subcritical steam cycle is used for heat recovery steam generation. A treatment unit for the sour water strips off the acid gases for utilization in the Claus unit. The steady-state model developed in Aspen Plus® is converted to an Aspen Plus Dynamics® simulation and integrated with MATLAB® for control studies. The results from the plant-wide dynamic model are compared qualitatively with the data from a commercial plant having different configuration, operating condition, and feed quality than what has been considered in this work. For load-following control, the GT-lead with gasifier-follow control strategy is considered. A modified proportional–integral–derivative (PID) control is considered for the syngas pressure control. For maintaining the desired CO{sub 2} capture rate while load-following, a linear model predictive controller (LMPC) is implemented in MATLAB®. A combined process and disturbance model is identified by considering a number of model forms and choosing the final model based on an information-theoretic criterion. The performance of the LMPC is found to be superior to the conventional PID control for maintaining CO{sub 2} capture rates in an IGCC power plant while load following.

01 COAL, LIGNITE, AND PEAT↗

The DOE s In-Plant Training (INPLT) Model to Promote Energy Efficiency in the Industrial Sector

In-Plant Training (INPLT) is a new model for developing energy efficiency expertise within the US manufacturing companies participating in the U.S. Department of Energy s (DOE s) Better Buildings, Better Plants Program-a nationwide initiative to drive a 25% reduction in industrial energy intensity in 10 years. INPLTs are designed to fill a market niche by providing hands on training in a real world manufacturing plant environment. Through INPLTs, participants from multiple manufacturing plants, supply chains, utilities, and other external stakeholders learn how to conduct energy assessments, use energy analysis tools to analyze energy saving opportunities, develop energy management systems, and implement energy savings projects. Typical INPLT events are led by DOE-certified Energy Experts and range from 2-4 days. Topics discussed include: identification of cross-cutting or system specific opportunities; introduction to ISO 50001 Energy Management Systems; and energy project implementation and replication. This model is flexible, and can be tailored to suit the needs of specific industries. The INPLTs are a significant departure from the traditional single plant energy assessment model previously employed by DOE. INPLTs shift the focus from the concept of a single-plant s energy profile to a broader focus on training and capacity building among multiple industrial participants. The objective is to enable trainees to identify, quantify, implement and replicate future energy saving projects without continued external assistance. This paper discusses the INPLT model and highlights some of the initial outcomes from the successfully delivered INPLTs and the overall impact in terms of numbers of plants/participants trained, impacted energy footprints, and potential replication of identified opportunities.

In-Plant Training (INPLT) Model↗

Atmosphere to Electrons: Enabling the Wind Plant of Tomorrow

The U.S. Department of Energy’s (DOE’s) Atmosphere to Electrons (A2e) research initiative is focused on improving the performance and reliability of wind plants by establishing an unprecedented understanding of how the Earth’s atmosphere interacts with the wind plants and developing innovative technologies to maximize energy extraction from the wind. The A2e initiative pursues an integrated research portfolio to coordinate and optimize advancements in four main research areas: 1) plant performance and financial risk assessment, 2) atmospheric science, 3) wind plant aerodynamics, and 4) next-generation wind plant technology. It offers an integrated systems approach to developing the next generation of System Management of the Atmospheric Resource by Turbines (SMART) wind plant technologies necessary to increase wind deployment.

a2e↗

Safeguards and security modeling for electrochemical plants

Safeguards and security design for reprocessing plants can lead to excessive costs if not incorporated early in the design process. The design for electrochemical plants is somewhat uncertain since these plants have not been built at a commercial scale in the past. The Separation and Safeguards Performance Model (SSPM), developed at Sandia National Laboratories, has been used for safeguards design and evaluation for multiple reprocessing plant types. The SSPM includes the following capabilities: -) spent fuel source term library, -) mass tracking of elements 1-99 and bulk solid/liquids, -) tracking of heat load and activity, -) customisable measurement points, -) automated calculation of ID and error propagation, -) alarm conditions and statistical tests, and -) user-defined diversion scenarios. Materials accountancy and process monitoring data can provide more timely detection of material loss specifically to protect against the insider threat. While the SSPM is capable of determining detection probabilities and examining detection times for material loss scenarios, it does not model the operations or spatial effects for a plant design. The STAGE software was chosen to model the physical protection system. STAGE provides a framework to create end-to-end scalable force-on-force combat simulations. It allows for a complete 3D model of a facility to be designed along with the design of physical protection elements. This software, then, can be used to model operations and response for various material loss scenarios. The future integration of the SSPM model data with the STAGE software will provide a more complete analysis of diversion scenarios to assist plant designers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A defense in depth approach for nuclear power plant accident management

An initiating event may lead to a severe accident if the plant safety functions have been challenged or operators do not follow the appropriate accident management procedures. Beyond design basis accidents are those corresponding to events of very low occurrence probability but such an accident may lead to significant consequences. The defense in depth approach is important to assure nuclear safety even in a severe accident. Plant Damage States (PDS) can be defined by the combination of the possible values for each of the PDS parameters which are showed on the nuclear power plant simulator. PDS is used to identify what the initiating event is, and can also give the information of safety system's status whether they are bypassed, inoperable or not. Initiating event and safety system's status are used in the construction of Containment Event Tree (CET) to determine containment failure modes by using probabilistic risk assessment (PRA) technique. Different initiating events will correspond to different CETs. With these CETs, the core melt frequency of an initiating event can be found. The use of Plant Damage States (PDS) is a symptom-oriented approach. On the other hand, the use of Containment Event Tree (CET) is an event-oriented approach. In this study, the Taiwan's fourth nuclear power plants, the Lungmen nuclear power station (LNPS), which is an advanced boiling water reactor (ABWR) with fully digitized instrumentation and control (I and C) system is chosen as the target plant. The LNPS full scope engineering simulator is used to generate the testing data for method development. The following common initiating events are considered in this study: loss of coolant accidents (LOCA), total loss of feedwater (TLOFW), loss of offsite power (LOOP), station blackout (SBO). Studies have indicated that the combination of the symptom-oriented approach and the event-oriented approach can be helpful to find mitigation strategies and is useful for the accident management. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

EPRI Report: Guidance in the Use of Robotics and Automation for Decommissioning Nuclear Power Plants - 17440

In the coming ten years, approximately 100 commercial nuclear power plants will be shut down worldwide, adding to the fifty nuclear power plants already shut down that have not yet entered into decommissioning. Just under a half of the overall cost of decommissioning a nuclear power plant is utility staffing costs (costing approximately 20 million USD per year of the decommissioning project), with waste and dismantlement costs making up the remainder. Decommissioning across the globe is being executed largely by manual labor. Some overview organizations such as OECD have concluded that the nuclear industry has not fully exploited or implemented current technological capabilities, and relies on outdated technology to perform decommissioning tasks. The use of more efficient and effective decommissioning technologies and processes could reduce the decommissioning project schedule and therefore the $20 M/year staffing costs incurred throughout the decommissioning project life. Such systems may also offer a substantial benefit with respect to worker safety and exposure reduction. However, tasks for which use of such systems is beneficial must be carefully considered. The systems themselves need to be robust and generally trouble free to operate in the demanding environment of commercial power plant decommissioning. EPRI is preparing a report, Guidance in the Use of Robotics and Automation for Decommissioning Nuclear Power Plants, which documents approaches that can perform decommissioning work in a safe and ALARA manner while reducing the overall cost to decommission a nuclear power plant. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Native Plants in Floodplain in Controlling Hg Flux into East Fork Poplar Creek of Oak Ridge - 18166

Legacy Hg contamination has been identified as the highest priority clean-up risk on the Oak Ridge Reservation (ORR) by the Department of Energy Office of Environmental Management (DOE-EM), Tennessee Department of Environment and Conservation (TDEC), and the US Environmental Protection Agency (EPA). During the 1950's and early 1960's, elemental mercury (Hg) was used to produce enriched Li isotope at the Y-12 National Security Complex (Y-12 Plant) for manufacturing components of various nuclear weapons systems. It is estimated that 350,000 kg of Hg was released to the environment contaminating facilities, soil, sediment, surface water, and groundwater within the boundaries of the Y-12 Plant and the downstream environment (i.e., East Fork Poplar Creek, EFPC). EFPC is a 23-km stream where the headwaters start in the Y-12 Plant, flows through the city of Oak Ridge, and empties into the Clinch River. Although various remediation efforts have reduced Hg fluxes from the Y-12 Plant over the last 25 years, the Hg concentration in water continue to exceed both the regulatory limit (51 ng/L) and the remediation goal (200 μg/L). Perennial grasses as floodplain plants have been successfully employed to control surface runoff and stabilize the floodplain. Hg has been strongly bound to particles suspended with surface runoff. Miscanthus grass is a perennial, tall grass that is adjusted to coarse, fine and medium textured soils. Although it grows best in deep, well-drained floodplain soils it is tolerant of poor to excessive well-drained soils, has an extensive tolerance for acidic to alkaline soils, and tolerates soil textures ranging from sand to clay. These long tangled root systems can reach moisture more deeply than other grasses during drought thus anchoring the plant into the soil. The fine appearance and branching hairs grow to form a dense mat that helps improve soil structure by increasing porosity and adding organic material that helps to bind soil particles together. In compacted or clay soils, spreading roots increase soil porosity by creating fractures in soil aggregates allowing water to penetrate deeper within the subsoil. This study showed that DOE remediation significantly reduced residual Hg to be <400 mg/kg in floodplain. However the residual Hg was mostly present in non-cinnabar mercury which is more bioavailable than cinnabar. The current study also found that Hg transfer flux from floodplain soils through surface soils with trees and grasses under natural rainfall events was an average of 0.28±0.15 μg/L, which was similar to the Hg concentrations in water of EFPC as reported by ORNL. Total Hg concentrations and Hg and speciation in floodplain soils were strongly affected by particle size distribution. Fine particles had higher Hg concentrations rich in cinnabar Hg. Clay particles contained as high as 2000-1600 mg/kg Hg with most Hg as cinnabar Hg, while coarse particles contained less total Hg, dominated by non-cinnabar Hg. Hg speciation in floodplain soil strongly controls its solubility, mobility, and bioavailability in both terrestrial/ aquatic ecosystems and downstream Hg concentrations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

D and D of a Large Waste Treatment Plant in Germany - 18458

With its 40 years of nuclear experience, GNS, the world leading supplier of casks for spent fuel, ILW and HLW, also offers services for conditioning and management of all types of radioactive waste, especially for the German NPP. Since 1985, GNS treats and packages ILW and LLW from the operations and phase-out of German NPP in its Duisburg plant. To enable its permanent safe final disposal, solid wastes are compacted and dried before being shipped to an interim storage facility or - later - the Konrad repository. The total premises cover 20.000 m{sup 2} (215.000 sq ft), of which 9000 m{sup 2} (97.000 sq ft) is controlled area. The Duisburg Plant has three large industrial warehouses (each 25 m x 136 m or 82 ft x 446 ft) with a total capacity of 10.200 m{sup 2} or 110.000 sqft. For the treatment of open contaminated waste, six enclosures were built. These enclosures have a special ventilation system including a specific filtration plant. In one enclosure a high compaction plant was used, in another enclosures a drying facility for drums was in operation. During peak periods, more than 900 tonne of waste were treated annually. One enclosure was mainly used for maintenance, restoration and extension of mobile facilities, which were normally used for campaigns in NPP. Due to the decreasing amount of operational waste during the nuclear phase out in Germany, GNS has decided to close the Duisburg Plant. In the first half-year of 2017, the last waste packages were treated but around 80 20'-containers are still located on site. The D and D started in January 2017. The presentation will show the first experience of decommission processes of the first three enclosures. The following steps including the techniques used will be explained in detail: - Dismantling and removal of the high compaction facility; - Dismantling and removal of the drying facility; - Cleaning and wipe tests of the empty enclosures; - Removal of the stainless steel plates of the floor; - Investigations of the lower floor parts for contamination; - Removal of contaminated underground drainpipes; - Decontamination of the concrete floor; - Dismantling of the ventilation system in three enclosures; - Dismantling of the steel constructions. An important aim during the dismantling is to reduce the amount of nuclear waste and maximize the fraction material for free release. Next to the first three enclosures, in one of the enclosure IV - VI, a 150 tons scrap shear had been installed before the construction of the enclosure building. The scrap shear has to be dismantled and handled by heavy duty lifting equipment. Only afterwards is it possible to start the decommissioning of the last three enclosures. Our goal is to transfer this very large controlled area and the whole plant to the site owner, the Duisburg Port company, after 2 years and 5 months and doing so in a way so that the industrial warehouses can be used again for all possible types of industries. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

HTTR-GT/H2 test plant - system design - 18680

Pre-licensing basic design for a cogenerating HTGR test plant system is presented. The plant to be coupled to JAEA s existing 30 MWt 950 deg. C test reactor HTTR is intended as a system technology demonstrator for JAEA s commercial Gas turbine High Temperature Reactor Cogeneration (GTHTR300C) plant design. More specifically the test plant of HTTR-GT/H2 aims to 1) demonstrate the licensability of the GTHTR300C for electricity production by gas turbine and hydrogen cogeneration by thermochemical process and 2) confirm the operation control and safety of such cogeneration system. With construction and operation completion by 2025, the test plant is expected to be the first of a kind HTGR-powered cogeneration plant operating on the two advanced energy conversion systems of closed cycle helium gas turbine for power generation and thermochemical iodine-sulfur water-splitting process for hydrogen production. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗