Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOSPHIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Properties of indium phosphite and selected compounds under irradiation with swift heavy ions

Surface and bulk properties of indium phosphate single crystals with initial and previously irradiated by 25 MeV electrons structures were irradiated with {sup 86}Kr (253 MeV) and {sup 197}Au (200 MeV) up to various fluences. The modern methods of condensed matter studies were used for research of InP property changes before and after irradiation as scanning (SEM) and high resolution transmission electronic microscopy (HTEM), Rutherford backscattering spectroscopy (RBS/C) and atomic force microscopy (AFM). The comparison of obtained results with the results of other authors is carried out. The surface structure change of InP single crystal irradiated by high-energy 86Kr ions and electrons is studied. It is shown the changes of the InP surface have complicated character and caused by inelastic sputtering processes. It is observed the twice irradiated layer swells with the cracks creation on the surface. The swelling with cracks and strong sputtering of twice irradiated by electrons and ions with high energy layers of the InP and GaAs surfaces are explained using the model based on the influence of ionizing energy loss of swift {sup 86}Kr ions. The small crystalline objects are detected on the InP surface irradiated with {sup 86}Kr ions which may be nano- and micro-crystals of InP. All obtained effects are discussed in frame of models based on ionizing energy loss of swift heavy ions.

36 MATERIALS SCIENCE↗

Contribution of Auger recombination to saturation of the light-current characteristics in high-power laser diodes ({lambda} = 1.0-1.9 m m)

Spectral and light-current characteristics of lasers based on the asymmetric separate-confinement heterostructures InGaAs/InGaAsAl/InP and InGaAs/GaAs/AlGaAs/GaAs were studied in the pulsed mode of lasing. It is shown that, at high levels of current pumping, the charge-carrier concentration in the active region of semiconductor lasers for the near-infrared optical region increases beyond the oscillation threshold; drastic saturation of the light-current characteristics is observed. Processes occurring in lasers as the charge-carrier concentration increases beyond the lasing threshold are studied theoretically. It is established that, at high pump levels, the rate of stimulated recombination decreases, the lifetime of charge carriers increases, and both the concentration of emitted photons and the quantum yield of stimulated radiation decrease. It is shown that variations in stimulated recombination, the decrease in the quantum efficiency, and saturation of the light-current characteristic in semiconductor lasers at high levels of current pumping are caused by the contribution of the nonradiative Auger recombination.

36 MATERIALS SCIENCE↗

Electrical properties of the InP/InGaAs pnp heterostructure-emitter bipolar transistor

The dc performances of an InP/InGaAs pnp heterostructure-emitter bipolar transistor are investigated by theoretical analysis and experimental results. Though the valence band discontinuity at the InP/InGaAs heterojunction is relatively large, the addition of a heavily-doped as well as thin p{sup +}-InGaAs emitter layer between p-InP confinement and n{sup +}-InGaAs base layers effectively eliminates the potential spike at emitter-base junction and simultaneously lowers the emitter-collector offset voltage and increases the potential barrier for electrons. Experimentally, a high current gain of 88 and a low offset voltage of 54 mV have been achieved.

36 MATERIALS SCIENCE↗

Thermal-resistant TiB{sub x}-n-GaP Schottky diodes

The effect of rapid thermal annealing on the parameters of TiB{sub x}-n-GaP Schottky barriers and interphase interactions at the TiB{sub x}-GaP interface are studied. It is shown that the contact TiB{sub x}-n-GaP system features an increased thermal stability without varying the electrical parameters of the Schottky barrier at temperatures as high as 600 deg. C.

36 MATERIALS SCIENCE↗

Properties of barrier contacts with nanosize TiB{sub x} layers to InP

Structural and electrical properties of Au-TiB{sub x}-nn{sup +}n{sup ++}-InP and TiB{sub x}-nn{sup +}n{sup ++}-InP multilayer barrier structures on standard ('rigid') and soft ('porous')n{sup ++}-InP substrates have been studied, with the semiconductor layers deposited by vapor-phase epitaxy, metallic layers formed by magnetron sputtering, and porous substrates fabricated by electrochemical etching of the standard InP. Samples on porous substrates have the following advantages: leakage currents in their reverse current-voltage characteristics are ten times lower; the range of the exponential rise in current in the forward characteristics is an order of magnitude wider; the changes in the ideality factor and the Schottky barrier height, observed as the contact area varies by a factor of 100, are three and {approx}10 times smaller, respectively; and the structure of the layers is more stable in annealing at up to 800{sup o}C.

36 MATERIALS SCIENCE↗

Infrared reflection spectra of multilayer epitaxial heterostructures with embedded InAs and GaAs layers

The effect of the thickness of embedded InAs and GaAs layers on the infrared reflection spectra of lattice vibrations for AlInAs/InAs/AlInAs, InGaAs/GaAs/InGaAs, and AlInAs/InGaAs/GaAs/InGaAs/AlInAs multilayer epitaxial heterostructures grown by MOC hydride epitaxy on InP (100) substrates is studied. Relative stresses emerging in the layers surrounding the embedded layers with variation in the number of monolayers from which the quantum dots are formed and with variation the thickness of the layers themselves surrounding the embedded layers are evaluated.

36 MATERIALS SCIENCE↗

Influence of electric field on the photoelectric effect in a Schottky barrier based on n-type cadmium diphosphide

The results of a study on photoelectric properties of a Schottky barrier based on n-type CdP{sub 2} are considered. The effect of the barrier electric field on photocurrents caused by photoelectron emission from metal and optical generation of excess charge carriers in the semiconductor was studied. It was found that the dependence of the photocurrent on the light-modulation frequency is controlled by level recharging times at the interfaces between the space-charge and quasi-neutrality regions and between semiconductor and metal. Good agreement between the calculated and experimental results was achieved.

36 MATERIALS SCIENCE↗

Determination of the charge transport mechanism in p-n junctions by analyzing temperature dependences of forward current-voltage characteristics

A method is suggested for determining the charge transport mechanism in p-n junctions by analyzing the temperature dependence of forward current-voltage characteristics at a low injection level. The method has been experimentally tested with Si:Au diodes, green GaP LEDs, and blue AlGaN/InGaN/GaN LEDS with a quantum well.

36 MATERIALS SCIENCE↗

Room-temperature broadband InAsSb flip-chip photodiodes with {lambda}{sub cutoff} = 4.5 {mu}m

Equilibrium and nonequilibrium IR images of p-InAsSbP/n-InAsSb/n{sup +}-InAs photodiodes including the images obtained in the electroluminescence and negative luminescence modes have been analyzed. The contact reflectivity has been evaluated. The influence of the substrate's doping level and mesa depth on the quantum efficiency and sensitivity of a backside illuminated photodiode sensitive in the 2.7-4.5 {mu}m range is discussed.

36 MATERIALS SCIENCE↗

The temperature dependence of internal parameters of disc laser diodes InAs/InAsSbP

For disc lasers based on the InAs/InAsSbP heterostructure with a generation wavelength of 3.03-3.06 {mu}m, the internal quantum yield of luminescence and rates of radiative and nonradiative recombination in a temperature range of 85-120 K are determined. It is established that as the temperature increases, the relative contribution of the rate of nonradiative recombination to the density of the threshold current increases from 89.9 to 92.8%. It is shown that the most probable mechanisms of nonradiative transitions in the InAs/InAsSbP disc heterolasers can be the CHCC and CHSH Auger processes with involvement of phonons. Coefficients of total losses for two experimentally observed generation bands are determined, and the maximum level of the internal optical losses is estimated. The figure of merit of the resonator of the InAs/InAsSbP disc heterolaser is {approx}10{sup 4}.

36 MATERIALS SCIENCE↗

Photosensitive structures based on ZnP{sub 2} single crystals of monoclinic and tetragonal modifications: Fabrication and properties

The method of gas-phase resublimation is used to grow the single-crystals of monoclinic and tetragonal modifications whose composition are identical and corresponds to the ZnP{sub 2} stoichiometry. The crystal-lattice parameters are determined and natural facets of the crystals of both modifications are identified. The obtained single crystals were used to fabricate for the first time the Schottky barriers and welded point structures; the latter exhibited rectification and the photovoltaic effect. On the basis of the first studies of photosensitivity of obtained structures subjected to the natural and linearly polarized radiation, the character of interband transitions is suggested, the values of the band gap are determined, and the influence of the position ordering of atoms on the structures' properties is observed. The phenomenon of natural photopleochroism observed in the structures based on oriented ZnP{sub 2} single crystals were studied. It is concluded that it is possible to use the zinc diphosphide in photoconversion of the intensity and polarization of optical radiation.

36 MATERIALS SCIENCE↗

Optical properties of quantum-confined heterostructures based on GaP{sub x}N{sub y}As{sub 1-x-y} alloys

The results of calculations of the band gap in GaP{sub x}N{sub y}As{sub 1-x-y} alloys and the estimated parameter of hybridization of the conduction band in GaP and the localized level of nitrogen are reported. The optical properties of quantum-confined heterostructures based on GaP{sub x}N{sub y}As{sub 1-x-y} alloys synthesized on the GaP (100) substrate surface are studied by photoluminescence measurements in the temperature range of 15-300 K. The heterostructures consist of GaP{sub 0.814}N{sub 0.006}As{sub 0.18} quantum wells separated by GaP barrier layers. The well width and the barrier thickness are 5 nm. Heterostructures with different numbers of periods are considered. On optical excitation of the structures, an intense photoluminescence line is observed in the spectral range 620-650 nm. The photoluminescence spectra of the GaP{sub 0.814}N{sub 0.006}As{sub 0.18}/GaP quantum wells are profoundly broadened because of the inhomogeneity of the quaternary alloy in composition. It is established that the increase in the number of quantum well layers from 10 to 25 does not results in degradation of the photoluminescence properties of the heterostructures. The results of the study support the view that it is possible to produce efficient optoelectronic devices on the basis of GaP{sub x}N{sub y}As{sub 1-x-y} alloys.

36 MATERIALS SCIENCE↗

Interrelation of the construction of the metamorphic InAlAs/InGaAs nanoheterostructures with the InAs content in the active layer of 76-100% with their surface morphology and electrical properties

The influence of the construction of a metamorphic buffer on the surface morphology and electrical properties of InAlAs/InGaAs/InAlAs nanoheterostructures with InAs content in the active layer from 76 to 100% with the use of the GaAs and InP substrates is studied. It is shown that such parameters as the electron mobility and the concentration, as well as the root-mean-square surface roughness, substantially depend on the construction of the metamorphic buffer. It is established experimentally that these parameters largely depend on the maximal local gradient of the lattice constant of the metamorphic buffer in the growth direction of the layers rather than on its average value. It is shown that, with selection of the construction of the metamorphic buffer, it is possible to form nanostructured surfaces with a large-periodic profile.

36 MATERIALS SCIENCE↗

Effect of postgrowth heat treatment on the structural and optical properties of InP/InAsP/InP nanowires

The effect of the postgrowth annealing of InP/InAsP/InP heterostructural nanowires produced by molecular-beam epitaxy on their structural and optical properties is studied. It is shown that the procedure of short-term (1 min) annealing in an argon atmosphere provides a means for increasing the emission intensity of InAsP quantum dots, suppressing the emission from InAsP quantum wells formed as a result of lateral growth, and substantially reducing the density of structural defects in the nanowires.

36 MATERIALS SCIENCE↗

Effect of microwave irradiation on the resistance of Au-TiB{sub x}-Ge-Au-n-n{sup +}-n{sup ++}-GaAs(InP) ohmic contacts

Temperature dependences of the contact resistivity {rho}{sub c} of Au-TiB{sub x}-Ge-Au-n-n{sup +}-n{sup ++}(GaAs)-InP ohmic contacts before and after short-term (10 s) microwave treatment have been studied both experimentally and theoretically. It is shown that {rho}{sub c} can decrease after microwave treatment in the entire temperature range of {rho}{sub c} measurements (100-400 K). Good agreement between the theoretical and experimental {rho}{sub c}(T) curves is attained and interpreted on the assumption that the dislocation density in the semiconductor near-surface region is varied as a result of microwave radiation.

36 MATERIALS SCIENCE↗

Electron mobility and effective mass in composite InGaAs quantum wells with InAs and GaAs nanoinserts

The paper is concerned with the theoretical and experimental studies of the band structure and electrical properties of InAlAs/InGaAs/InAlAs/InP heterostructures containing a composite InGaAs quantum well with InAs and GaAs nanoinserts. From the Shubnikov-de Haas effect, the effective cyclotron mass m{sub c}* is determined experimentally and calculated with consideration for the nonparabolicity of the electron energy spectrum. An approach to estimation of the effective mass is proposed and tested. The approach is based on weighted averaging of the m{sub c}* of the composite quantum well's constituent materials. A first proposed heterostructure containing two InAs inserts symmetrically arranged in the quantum well makes a 26% reduction in m{sub c}* compared to m{sub c}* in the lattice-matched In{sub 0.53}Ga{sub 0.47}As quantum well possible.

36 MATERIALS SCIENCE↗

Creation and studies of the photosensitivity of Ox/n-GaP structures

Photosensitive heterostructures Ox/n-GaP, where Ox is a native oxide, are created for the first time by thermal interaction of a GaP crystal with ambient air. The photovoltaic effect of the heterostructures, which dominates upon illumination of the structure's oxide film, is revealed. First, the spectral dependences of the relative quantum efficiency of photoconversion for the obtained heterostructures are analyzed, the character of the band-to-band transitions is determined, and the GaP band gap is estimated. A conclusion is drawn regarding the potential of using the vacuum-free thermal oxidation of homogeneous n-GaP single crystals in ambient air to fabricate broadband photoconverters of optical radiation.

36 MATERIALS SCIENCE↗