Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical approximations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

A model of CO-CH4 global transport/chemistry. II - Preliminary calculation by 1 dimensional model

Calculations of the one-dimensional CO-CH4 transport/chemistry model were performed to investigate the sensitivity of the OH vertical profile to various factors. The boundary conditions at the earth's surface and the tropopause are discussed. The results show that the liquid-phase or soil-phase resistance dominates the mass transfer of both CO and CH4 between the atmosphere and the earth's surface. At the tropopause, the CO and CH4 fluxes are set approximately equal to the value at the previous time step in the numerical calculation. Photolysis rate coefficients that increase with altitude modified the OH vertical profile so that the maximum value was at midtroposphere altitudes. Increasing the CO concentration caused a decrease of the OH concentration, and the OH profile was very sensitive to the NO(x) profiles. The calculated OH profiles are compared with those from other investigations and also with some available measurements. Although the available measurements of the OH profiles are limited, the calculated OH profiles agree fairly well with them.

Kitada, T.↗
NASA NTRS1981

Study of Advanced Propulsion Systems for Small Transport Aircraft Technology (STAT) Program

Definitions of takeoff gross weight, performance, and direct operating cost for both a 30 and 50 passenger airplane were established. The results indicate that a potential direct operating cost benefit, resulting from advanced technologies, of approximately 20 percent would be achieved for the 1990 engines. Of the numerous design features that were evaluated, only maintenance-related items contributed to a significant decrease in direct operating cost. Recommendations are made to continue research and technology programs for advanced component and engine development.

Baerst, C. F.↗
NASA NTRS1982

Adaptive-wall wind-tunnel research at NASA-Ames Research Center

Adaptive wall wind tunnel research is summarized. Small scale two and three dimensional wind tunnel experiments and numerical experiments with a three dimensional adaptive wall simulator are included. A NACA 0012 airfoil was tested in a 25 by 13 cm slotted wall test section. Airflow through the test section walls was controlled by adjusting the pressures in segmented plenums. Interference free conditions were successfully attained in subsonic and transonic flows. For the three dimensional experiment, the 25 by 13 cm wind tunnel was modified to permit cross stream wall adjustments. The test model was a semispan wing mounted to one sidewall. Wall interference was substantially reduced at several angles of attack at Mach 0.60. A wing on wall configuration was also modeled in the numerical experiments. These flow simulations showed that free air conditions can be approximated by adjusting boundary conditions at only the floor and ceiling of the test section. No sidewall control was necessary. Typical results from these experiments are discussed.

Schairer, E. T.↗
NASA NTRS1982

Adaptive-wall wind-tunnel research at Ames Research Center

Adaptive-wall wind-tunnel research is summarized. This research includes small-scale two- and three-dimensional wind-tunnel experiments and numerical experiments with a three-dimensional adaptive-wall simulator. Airflow through the test-section walls is controlled by adjusting the pressures in segmented plenums. Interference free conditions are successfully attained in subsonic and transonic flows. An adaptive wall test section is constructed for the transonic wind tunnel. Wall interference was reduced in the three dimensional experiment at several angles of attack at Mach 0.60. A wing on wall configuration was modeled in the numerical experiments. These flow simulations showed that free air conditions can be approximated by adjusting boundary conditions at only the floor and ceiling of the test section. No sidewall control was necessary.

Schairer, E. T.↗
NASA NTRS1983

An implicit, transonic, full-potential code for cascade flow on H-grid topology

A transonic, full-potential code is developed for computing the flow through two-dimensional cascades using an H-type grid topology that employs an implicit approximate-factorization scheme. The body-conforming H-grid is generated numerically by solving Poisson's equation. The flow-solution algorithm at the coordinate mapping singularity associated with this grid is investigated using two different types of finite-difference schemes. The grid-geometry effect on these schemes is also studied by noting free-stream capturing properties. It is found that by implementing a consistent spatial differencing scheme, the mapping singularities can be resolved numerically, and the grid-geometry-induced error minimized. The code is verified by computing model cascade flow problems.

Kwak, D.↗
NASA NTRS1983

Ship waves and lee waves

Dynamics analogous to those of surface ship waves on water of finite depth are noted for the three-dimensional trapped lee wave modes produced by an isolated obstacle in a stratified fluid. This vertical trapping of wave energy is modeled by uniform upstream flow and stratification, bounded above by a rigid lid, and by a semiinfinite fluid of uniform stability whose wind velocity increases exponentially with height, representing the atmosphere. While formal asymptotic solutions are produced, limited quantitative usefulness is obtained through them because of the limitations of the approximations and the infinity of modes in the solution. Time-dependent numerical models are accordingly developed for both surface ship waves and internal and atmospheric ship waves, yielding a variety of results.

Sharman, R. D.↗
NASA NTRS1984

Dynamics analysis of electrodynamic satellite tethers. Equations of motion and numerical solution algorithms for the tether

The equations of motion are developed for a perfectly flexible, inelastic tether with a satellite at its extremity. The tether is attached to a space vehicle in orbit. The tether is allowed to possess electrical conductivity. A numerical solution algorithm to provide the motion of the tether and satellite system is presented. The resulting differential equations can be solved by various existing standard numerical integration computer programs. The resulting differential equations allow the introduction of approximations that can lead to analytical, approximate general solutions. The differential equations allow more dynamical insight of the motion.

Nacozy, P. E.↗
NASA NTRS1984

Non-Gaussian statistical models of surface wave fields for remote sensing applications

Based on the complete Stokes wave model with the bias term and using a simple mapping approach and an iteration solution method, we established a formula for the joint probability density function of the surface slope elevation of a nonlinear random wave field. The formula requires three parameters to define the whole density function: the rms surface elevation and slope values and the significant slope. This model represents the dynamics of the wave in a more direct way than the Gram-Charlier approximation. Based on this new statistical model and laboratory experiments, formula and numerical values of EM bias and dynamics bias are derived. The results indicate that various biases should be considered seriously if accuracy of the altimeter measurement is required in centimeter range.

Huang, N. E.↗
NASA NTRS1985

Strategy for reflector pattern calculation: Let the computer do the work

Using high frequency approximations, the secondary pattern of a reflector antenna can be calculated by numerically evaluating a radiation integral I(u,v). In recent years, tremendous effort has been expended to reducing I(u,v) to Fourier integrals. These reduction schemes are invariably reflector geometry dependent. Hence, different analyses/computer software development must be carried out for different reflector shapes/boundaries. it is pointed out, that, as the computer power improves, these reduction schemes are no longer necessary. Comparable accuracy and computation time can be achieved by evaluating I(u,v) by a brute force FFT described in this note. Furthermore, there is virtually no restriction on the reflector geometry by using the brute force FFT.

Lam, P. T.↗
NASA NTRS1986

Strategy for reflector pattern calculation - Let the computer do the work

Using high frequency approximations, the secondary pattern of a reflector antenna can be calculated by numerically evaluating a radiation integral I(u,v). In recent years, tremendous effort has been expended to reducing I(u,v) to Fourier integrals. These reduction schemes are invariably reflector geometry dependent. Hence, different analyses/computer software development must be carried out for different reflector shapes/boundaries. It is pointed out, that, as the computer power improves, these reduction schemes are no longer necessary. Comparable accuracy and computation time can be achieved by evaluating I(u,v) by a brute force FFT described in this note. Furthermore, there is virtually no restriction on the reflector geometry by using the brute force FFT.

Lam, P. T.↗
NASA NTRS1986

A spline-based parameter estimation technique for static models of elastic structures

The problem of identifying the spatially varying coefficient of elasticity using an observed solution to the forward problem is considered. Under appropriate conditions this problem can be treated as a first order hyperbolic equation in the unknown coefficient. Some continuous dependence results are developed for this problem and a spline-based technique is proposed for approximating the unknown coefficient, based on these results. The convergence of the numerical scheme is established and error estimates obtained.

Dutt, P.↗
NASA NTRS1987

Phycomyces in space: A problem in bioengineering

Sustaining life with total automation is a difficult problem for GAS canisters. The length of time between setting the experiment and flight, the conditions of a completely sealed container, no guarantee on launch delay, orientation and the possibility of contamination all tend to exclude experiments with living matter. This experiment examines the growth of a nontoxic, everyday fungus, Phycomyces, in a microgravity environment. Data from this experiment will help define the mechanism by which plants determine the direction of gravity. The bioengineering problems were solved only after numerous tests and design changes. Phycomyces normally have a shelf life of approximately one week. Storing the fungus for two months, activating the fungus for growth and precise timing were the major obstacles. Solutions were found for storage by drying the fungus spores onto pieces of filter paper. Activation occurs when this filter paper is dropped onto the growth medium, via a solenoid system. The problem of timing is partially solved by growing more than one chamber of the fungus at different time intervals. This experiment proves that the simpler a design, the better it works.

Schneringer, Julie A.↗
NASA NTRS1985

Evaluation of fault-tolerant system performance by approximate techniques

An approximate method for calculating the statistics of the performance of a fault-tolerant system is developed. An approximate method is necessary because the statistical model of the system behavior is large-scale and the time horizon of interest encompasses many cycles of the Redundancy Management logic. In the development, a compact representation of the necessary information called the v-transform is introduced and discussed. Based upon this representation, an approximation that leads to a very efficient computational procedure is suggested and numerically analyzed. A very brief discussion of other related work is also presented.

Walker, B. K.↗
NASA NTRS1987

Tunneling-assisted impact ionization for a superlattice

Tunneling-assisted impact ionization across the conduction-band-edge discontinuity of quantum-well heterostructures is investigated and applied to a new superlattice structure. Multiquantum-well structures where the quantum-well regions are heavily doped and the undoped barrier regions are essentially insulating were considered. Incident hot electrons due to the applied electric field perpendicular to the heterointerface interact with the two-dimensional electrons confined to the quantum wells through Coulomb force. The resultant electrons can either have enough energy to get out of the wells or to tunnel through the triangular barriers. A new analytical approximation for the impact ionization rate is given which compares favorably with numerical results. The tunneling-assisted impact ionization rates and the ionization coefficients are calculated. It is shown that the tunneling effect reduces the ionization threshold and enhances the ionization rate significantly.

Chuang, S. L.↗
NASA NTRS1987

The structure of the time-dependent interstellar shocks and grain destruction in the interstellar medium

A new theoretical analysis of the structure of interstellar shocks and the grain dynamics of these shocks is presented. The basic hydrodynamic equations for J-shocks in interstellar gas are given in which shock-driving pressure is allowed to be weakly time-dependent and the grains are treated as a separate two-dimensional fluid. Specific equations for the grain dynamics in the cooling postshock gas are derived. An analytic theory for the propagation of a shock driven into an interstellar cloud by the blast wave of a supernova remnant which sweeps over the cloud is developed. An improved calculation of the grain charge in postshock gas is described, giving a simple analytic approximation for the results. The consequences of including these processes in the numerical code of Seab and Shull (1983) are addressed, including the effect of realistic magnetic fields in low-density gas.

Mckee, Christopher F.↗
NASA NTRS1988

A methodology for the synthesis of robust feedback systems

A new methodology is developed for the synthesis of linear, time-variant (LTI) controllers for multivariable LTI systems. The resulting closed-loop system is nominally stable and exhibits a known level of performance. In addition, robustness of the feedback system is guaranteed, i.e., stability and performance are retained in the presence of multiple unstructured uncertainty blocks located at various points in the feedback loop. The design technique is referred to as the Causality Recovery Methodology (CRM). The CRM relies on the Youla parameterization of all stabilizing compensators to ensure nominal stability of the feedback system. A frequency-domain inequality in terms of the structured singular value mu defines the robustness specification. The optimal compensator, with respect to the mu condition, is shown to be noncausal in general. The aim of the CRM is to find a stable, causal transfer function matrix that approximates the robustness characteristics of the optimal solution. The CRM, via a series of infinite-dimensional convex programs, produces a closed-loop system whose performance robustness is at least as good as that of any initial design. The algorithm is approximated by a finite dimensional process for the purposes of implementation. Two numerical examples confirm the potential viability of the CRM concept; however, the robustness improvement comes at the expense of increased computational burden and compensator complexity.

Milich, David Albert↗
NASA NTRS1988

Estimation of discontinuous coefficients and boundary parameters for hyperbolic systems

The problem of estimating discontinuous coefficients, including locations of discontinuities, that occur in second-order hyperbolic systems typical of those arising in one-dimensional surface seismic problems, is considered. The problem of identifying unknown parameters that appear in boundary conditions for the system is addressed. A spline-based approximation theory is presented as well as related convergence findings and representative numerical examples.

Lamm, Patricia K.↗
NASA NTRS1989

A spline-based parameter estimation technique for static models of elastic structures

The problem of identifying the spatially varying coefficient of elasticity using an observed solution to the forward problem is considered. Under appropriate conditions this problem can be treated as a first order hyperbolic equation in the unknown coefficient. Some continuous dependence results are developed for this problem and a spline-based technique is proposed for approximating the unknown coefficient, based on these results. The convergence of the numerical scheme is established and error estimates obtained.

Dutt, P.↗