Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Number”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

An experimental investigation of an oblique-wing and body combination at Mach numbers between 0.60 and 1.40

An experimental investigation was conducted in an 11- by 11-foot wind tunnel to determine the aerodynamic characteristics of an oblique high aspect ratio wing in combination with a high fineness-ratio Sears-Haack body. Longitudinal and lateral-directional stability data were obtained at wing yaw angles from 0 deg to 60 deg over a test Mach number range from 0.6 to 1.4 for angles of attack between minus 6 deg and 9 deg. The effects of changes in Reynolds number, dihedral, and trailing-edge angle were studied along with the effects of a roughness strip on the upper and lower surfaces of the wing. Flow-visualization studies were made to determine the nature of the flow on the wing surfaces.

Graham, L. A.↗
NASA NTRS1973

The number-intensity distribution of X-ray sources observed by Uhuru.

The Uhuru catalog of X-ray sources is used to analyze the number versus apparent-intensity relation of X-ray objects, by constructing (log N, log S)-plots similar to those used in radio astronomy. The source number distribution is corrected for nonuniform sky coverage of the spacecraft. Two distinct distributions for objects at low (less than 20 deg) and high (more than 20 deg) galactic latitude are discussed. The distribution for low galactic latitude objects (which are mainly galactic) gives further information on their location within the Galaxy and their intrinsic luminosity. The distribution for high-latitude objects is consistent with an extragalactic origin of these sources. Evidence from the longitudinal distribution of these objects is used to further demonstrate their extragalactic nature.

Matilsky, T.↗
NASA NTRS1973

Revised tables of airspeed, altitude, and Mach number presented in the International system of units

Because inception of a national program to implement the International System of Units (SI) appears to be inevitable and imminent, the tables of airspeed, altitude, and Mach number prepared by Livingston and Gracey to serve for airspeed meter and altimeter calibrations and for the conversion of flight measurements of these quantities to related parameters - Mach number, true airspeed, equivalent airspeed, etc. - have been revised to the SI. Tables of airspeed in knots are also included because of the significance of this quantity in navigation. In addition, the data in the altitude tables have been revised to the U.S. Standard Atmosphere of 1962. The latter data reflect increased knowledge of the higher atmosphere and more precise determination of basic quantities, including the redefinition of the absolute thermodynamic temperature scale by the Tenth General Conference on Weights and Measures in 1954. The U.S. Standard Atmosphere, 1962, corresponds to the International Civil Aviation Organization (ICAO) Standard Atmosphere up to 20 kilometers (geopotential altitude). A table of conversion factors for various pressure units is presented in SI Units.

Benner, M. S.↗
NASA NTRS1974

The cryogenic wind tunnel for high Reynolds number testing

Experiments performed at the NASA Langley Research Center in a cryogenic low-speed continuous-flow tunnel and in a cryogenic transonic continuous-flow pressure tunnel have demonstrated the predicted changes in Reynolds number, drive power, and fan speed with temperature, while operating with nitrogen as the test gas. The experiments have also demonstrated that cooling to cryogenic temperatures by spraying liquid nitrogen directly into the tunnel circuit is practical and that tunnel temperature can be controlled within very close limits. Whereas most types of wind tunnel could operate with advantage at cryogenic temperatures, the continuous-flow fan-driven tunnel is particularly well suited to take full advantage of operating at these temperatures. A continuous-flow fan-driven cryogenic tunnel to satisfy current requirements for test Reynolds number can be constructed and operated using existing techniques. Both capital and operating costs appear acceptable.

Kilgore, R. A.↗
NASA NTRS1974

Aerodynamic and flow visualization studies of variations in the geometry of irregular planform wings at a Mach number of 20.3

The longitudinal and summary lateral-directional stability characteristics have been obtained for a variety of irregular planform wings applied to a conceptual space shuttle orbiter. Three basic wing planforms with leading-edge sweep angles of 53.2 deg, 46.8 deg, and 35 deg were studied in conjunction with a series of inboard planform fillets with sweep angles up to 78 deg. The spanwise intersection point of the fillets and the basic wings was held constant. The data were obtained in the Langley 22-inch helium tunnel at a Mach number of 20.3 and a Reynolds number of 2.10 million based on model length. Model angle-of-attack range was from 0 deg to 54 deg at sideslip angles of 0 deg and minus 3.8 deg. Also included are results of a flow-visualization study consisting of electron-beam-illuminated flow and surface oil-flow patterns.

Stone, D. R.↗
NASA NTRS1974

Longitudinal aerodynamic performance of a series of power-law and minimum wave drag bodies at Mach 6 and several Reynolds numbers

Experimental data have been obtained for two series of bodies at Mach 6 and Reynolds numbers, based on model length, from 1.4 million to 9.5 million. One series consisted of axisymmetric power-law bodies geometrically constrained for constant length and base diameter with values of the exponent n of 0.25, 0.5, 0.6, 0.667, 0.75, and 1.0. The other series consisted of positively and negatively cambered bodies of polygonal cross section, each having a constant longitudinal area distribution conforming to that required for minimizing zero-lift wave drag at hypersonic speeds under the geometric constraints of given length and volume. At the highest Reynolds number, the power-law body for minimum drag is blunter (exponent n lower) than predicted by inviscid theory (n approximately 0.6 instead of n = 0.667); however, the peak value of lift-drag ratio occurs at n = 0.667. Viscous effects were present on the bodies of polygonal cross section but were less pronounced than those on the power-law bodies. The trapezoidal bodies with maximum width at the bottom were found to have the highest maximum lift-drag ratio and the lowest mimimum drag.

Ashby, G. C., Jr.↗
NASA NTRS1974

Flight simulation characteristics of the Langley high Reynolds number cryogenic transonic tunnel

The characteristics of the Langley 34 cm (13.5 in.) pilot cryogenic transonic pressure tunnel are described, and the results of initial tunnel operation are presented. Tests of a two-dimensional airfoil at a Mach number of 0.85 show identical pressure distributions for a chord Reynolds number of 8,600,000 obtained first at a stagnation pressure of 4.91 atmospheres at a stagnation temperature of +120 F and then at a stagnation pressure of 1.19 atmospheres at a stagnation temperature of -250 F.

Kilgore, R. A.↗
NASA NTRS1974

Transition Reynolds number comparisons in several major transonic tunnels

Boundary-layer transition and test section environmental noise data were acquired in six major transonic wind tunnels as a part of a broader correlation of the effect of free-stream disturbances on transition Reynolds number. The data were taken at comparative test conditions on a sharp, smooth 10-deg included-angle cone. It was found that aerodynamic noise sources within the test section were the dominant sources of unsteadiness and that transition Reynolds number provided a good indicator for the resulting degradation in flow quality. Amplitudes, frequency composition, directivity, and origin of these disturbances are described.

Dougherty, N. S., Jr.↗
NASA NTRS1974

An experimental and theoretical study of low-aspect ration swept and oblique wings at Mach numbers between 0.6 and 1.4

Experimental forces and moments for two wing-body combinations having (a) a swept wing and (b) an oblique wing are compared. At all Mach numbers, the oblique wing (at its optimum sweep angle) had higher maximum lift-to-drag ratios than the fixed, swept wing. At high angles of attack, the direction of the pitching or rolling tendencies of the oblique wing was a function of the spanwise distribution of wing bend or washout for the two bends being investigated. At low angles of attack, linear theory gave satisfactory predictions of the subsonic lift-curve slope, the aerodynamic-center travel with Mach number, and the maximum lift-to-drag ratio.

Hopkins, E. J.↗
NASA NTRS1974

Pressure and heat flux results from the space shuttle/external fuel tank interaction test at Mach numbers 16 and 19

Heat transfer rates and pressures were measured on a 0.0175-scale model of the space shuttle external tank (ET), model MCR0200. Tests were conducted with the ET model separately and while mated with a 0.0175-scale model of the orbiter, model 21-OT (Grumman). The tests were conducted in the AEDC-VKF Hypervelocity Wind Tunnel (F) at Mach numbers 16 and 19. The primary data consisted of the interaction heating rates experienced by the ET while mated with the orbiter in the flight configuration. Data were taken for a range of Reynolds numbers from 50,000 to 65,000 under laminar flow conditions.

Brewer, E. B.↗
NASA NTRS1974

Experimental study of the effectiveness of cylindrical plume simulators for predicting jet-on boattail drag at Mach numbers up to 1.30

An investigation has been conducted in a 16-foot transonic tunnel to determine the effectiveness of utilizing solid circular cylinders to simulate the jet exhaust plume for a series of eight nacelle-mounted isolated circular-arc afterbodies. This investigation was conducted at Mach numbers from 0.40 to 1.30 at an angle of attack of 0. Plume simulators with simulator diameter to nozzle-exit diameter ratios of 0.82, 0.88, 0.98, and 1.00 were investigated. Results of this investigation indicate that use of one of the larger diameter simulators at all Mach numbers would generally result in pressure-coefficient distributions and drag coefficients useful for preliminary design work.

Reubush, D. E.↗
NASA NTRS1975

Experimental and analytical sonic nozzle discharge coefficients for Reynolds numbers up to 8 x 10 to the 6th power

Sonic discharge coefficients are obtained for two different geometry flow nozzles using high-pressure nitrogen gas (100 atm) with significant real-gas flow corrections. Throat Reynolds number range extended up to 8 million. Discharge coefficients for both nozzles monotonically increase in value at the high throat Reynolds numbers. The 95-percent confidence band for each nozzle is shown. Analytical discharge coefficients for the continuous and finite radius of curvature nozzle are presented. These analytical results for the laminar and turbulent boundary-layer cases are compared to experimental values for sonic flow. Experimental values are also compared to values calculated from the best empirical curve fit equation for subsonic flow.

Szaniszlo, A. J.↗
NASA NTRS1975

Aerodynamic characteristics of MSFC model 454 of the 142 inch solid rocket booster tested in the LeRC 10 foot SWT at Mach numbers of 2.0 and 2.7 (SA6F)

A 2.112 percent scale Space Shuttle Solid Rocket Booster (SRB) was tested in a ten foot, supersonic wind tunnel. The test Mach numbers were 2.0 and 2.7. Test angles of attack were from minus 5 degrees to plus 185 degrees. The Reynolds numbers ranged from 0.514 to 2.81 million per foot. Test roll angles were 0, 22.5, 45, 90, and 135 degrees. The following configurations were tested: (1) SRB without external protuberances, (2) SRB with an electrical tunnel and a thrust attachment structure, (3) SRB with two engine shroud strakes, (4) SRB with eight engine shroud strakes, and (5) SRB with an electrical tunnel, thrust attachment structure, eight engine shroud strakes, and separation motors.

Johnson, J. D.↗
NASA NTRS1975

The effect of surface temperature and Reynolds number on the leeward heat-transfer for a shuttle orbiter

The effect of windward surface temperature on the heat transfer to the leeward surface of the shuttle orbiter was investigated. Heat-transfer distributions, surface-pressure distributions, and schlieren photographs were obtained for an 0.01-scale model of the 37-0 shuttle orbiter at angles-of-attack of 30 deg and of 40 deg. Similar data were obtained for a fuselage-only configuration at angles-of-attack of 30 deg and of 90 deg. Data were obtained for various Mach numbers, Reynolds numbers, and surface temperatures.

Bertin, J. J.↗
NASA NTRS1975

Wind tunnel investigation of a Centaur standard shroud compartment vent from Mach number of 0.70 to 1.96

An experimental investigation was conducted in the Lewis Research Center 8- by 6-foot supersonic wind tunnel to determine the vent discharge coefficient for the Centaur standard shroud/liquid hydrogen tank compartment vent. The test was conducted from Mach 0.70 to 1.96 with the vent mounted in a flat plate. Full scale simulated flight hardware, such as the vent, corrugations, aft field joint ring and ice bag clip was used. Air was discharged from a plenum chamber, located on the tunnel sidewall behind the plate, through five 6.35 cm diameter vent orifices into the free stream. Boundary layer thickeners, analytically predicted displacement thickness for the vehicle nominal flight trajectory could be simulated over the Mach number range. The highest vent discharge coefficient for any given Mach number and vent pressure ratio generally occurred at the maximum displacement thickness.

Johns, A. L.↗
NASA NTRS1975

Experimental determination of post-stall rotary derivatives for airplane-like configurations at several Reynolds numbers

Military and civilian airplane losses due to out-of-control spin motions are significant. Knowledge of rotary coefficients is necessary to understand the cause of spin entry and to devise proper recovery techniques. An exploratory wind-tunnel investigation has been conducted on simple airplane-like configurations on a rotary sting apparatus at rotation rates up to 10 rps. Rotary coefficients have been measured at unit Reynolds numbers from 2,000,000 to 24,600,000 per m and at angles of attack from 45 to 90 deg. Results show that the aerodynamic characteristics at steady spin rates are highly dependent on both spin rate and Reynolds number.

Clarkson, M. H.↗
NASA NTRS1975

Thrust performance of isolated 36-chute suppressor plug nozzles with and without ejectors at Mach numbers from 0 to 0.45

Plug nozzles with chute-type noise suppressors were tested with and without ejector shrouds at free-stream Mach numbers from 0 to 0.45 and over a range of nozzle pressure ratios from 2 to 4. A 36-chute suppressor nozzle with an ejector had an efficiency of 94.6 percent at an assumed takeoff pressure ratio of 3.0 and a Mach number of 0.36. This represents only a 3.4 percent performance penalty when compared with the 98 percent efficiency obtained with a previously tested unsuppressed plug nozzle.

Harrington, D. E.↗
NASA NTRS1975

An experimental investigation of the NASA space shuttle external tank at hypersonic Mach numbers

Pressure and heat transfer tests were conducted simulating flight conditions which the space shuttle external tank will experience prior to break-up. The tests were conducted in the Calspan 48-inch Hypersonic Shock Tunnel and simulated entry conditions for nominal, abort-once-around (AOA), and return to launch site (RTLS) launch occurrences. Surface pressure and heat-transfer-rate distributions were obtained with and without various protuberences (or exterior hardware) on the model at Mach numbers from 15.2 to 17.7 at angles of attack from -15 deg to -180 deg and at several roll angles. The tests were conducted over a Reynolds number range from 1300 to 58,000, based on model length.

Wittliff, C. E.↗