Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental k eff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding as well as the 236 U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9σ) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2σ uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sensitivity Coefficients Calculated for the Prompt Neutron Decay Constant At or Near Delayed Critical

The derivation of a non-invasive prompt neutron decay constant sensitivity coefficient is provided in this work. The computation of the sensitivity coefficient derived in this work does not require modification of Monte Carlo source code and is based on capabilities available in Monte Carlo N-Particle R© Code Version 6.2. The prompt neutron decay constant sensitivity coefficients are calculated for 44-group and 252-group energy structures for specific nuclide-reaction pairs in the Jezebel benchmark experiment. The nuclide-reaction pairs investigated in this work include Pu- 239(n,f), Pu-240(n,f), and Pu-241(n,f). Physical explanations of the sensitivity profiles exhibited by the 252-group energy structure are investigated for the prompt neutron multiplication factor, mean neutron lifetime, and prompt neutron decay constant. The prompt neutron decay constant sensitivity coefficients calculated for the 44-group and 252-group energy structure of Pu-239(n,f) are compared. Lastly, the 44-group energy structure sensitivity coefficients calculated are used for nuclear-data induced uncertainty quantification of the neutron multiplication factor. This work shows that a reduction in the nuclear data-induced uncertainty of the neutron multiplication factor is possible for all nuclide-reaction pairs investigated when prompt neutron decay constant sensitivity coefficients are utilized. This is important for new critical experiment design optimization studies of measurement configurations. This work provides a basis for more detailed sensitivity analysis and uncertainty quantification of nuclide, reaction, and energy-specific cross section data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effect of Fuel Fraction on Small Modified CANDLE Burn-up Based Gas Cooled Fast Reactors

A conceptual design study of Gas Cooled Fast Reactors with Modified CANDLE Burn-up has been performed. The objective of this research is to get optimal design parameters of such type reactors. The parameters of nuclear design including the critical condition, conversion ratio, and burn-up level were compared. These parameters are calculated by variation in the fuel fraction 47.5% up to 70%. Two dimensional full core multi groups diffusion calculations was performed by CITATION code. Group constant preparations are performed by using SRAC code system with JENDL-3.2 nuclear data library. In this design the reactor cores with cylindrical cell two dimensional R-Z core models are subdivided into several parts with the same volume in the axial directions. The placement of fuel in core arranged so that the result of plutonium from natural uranium can be utilized optimally for 10 years reactor operation. Modified CANDLE burn-up was established successfully in a core radial width 1.4 m. Total thermal power output for reference core is 550 MW. Study on the effect of fuel to coolant ratio shows that effective multiplication factor (k{sub eff}) is in almost linear relations with the change of the fuel volume to coolant ratio.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

V and V of the HTR Code Package (HCP) as a comprehensive HTR steady state and transient safety analysis framework - 18664

The HTR code package (HCP) allows for the simulation of several safety-related aspects of a High Temperature Reactor core in a highly integrated manner. HCP currently couples the thermo-fluid dynamics and time dependent neutronics code MGT, the spectrum code TRISHA, the burn up code TNT, the fuel management code SHUFLE and the fission product release code STACY. During its development, state-of-the-art programming techniques and standards are applied. The cross sections in HCP are generated by a 0D- or 1D solver featuring an innovative approach to treat the double heterogeneity of pebble fuel. Also major improvements have been made to optimize the nuclear data library based on ENDF/B-VII. Two advanced fuel management models are provided by the code module SHUFLE that go far beyond the capabilities of existing system codes like VSOP. The source term analysis code module STACY is coupled to HCP providing release rate calculations with a high spatial resolution making use of the nuclide densities provided by TNT. An outstanding new feature of HCP is the possibility to simulate long-term operation scenarios based on OTTO or MEDUL fuel shuffling schemes as well as selected transients in one integrated code package. Even alternating steady state/transient/steady state simulations are possible. So with HCP different fuel strategies and their influence on various kinds of accidents can be examined with one consistent reactor model. This paper provides an overview of the development status of the HCP and reports about selected benchmark results. It is demonstrated that the new system code HCP is capable to replace existing stand-alone codes like VSOP, TINTE/MGT, FRESCO or PANAMA while introducing new features, which so far to our knowledge were not available in the field of HTR safety research. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Incorporating new evaluation on angular distributions and energy spectra of neutron-induced charged particle reactions into the next ENDF library release (Technical Progress Report)

This project aims to provide the improved Evaluated Nuclear Data File (ENDF) using the newly measured data as well as the latest nuclear reaction model for calculating angular distributions and energy spectra on neutron-induced charged particle reactions through the collaboration of Korea Atomic Energy Research Institute (KAERI) and Los Alamos National Laboratory (LANL). The LANL group will provide the experimental data for angular distributions and spectra of (n,p) and (n,α) on several structural materials such as Fe, Ni and Zn isotopes using the Low Energy Neutron-induced Charged-particle (Z) Chamber (LENZ) instrument at Los Alamos Neutron Science Center (LANSCE). The KAERI group will provide the improved evaluated nuclear library which is based on the LANL experimental data, and further will predict angular distributions and spectra of (n,p) and (n,α) reactions on unmeasured nuclides, such as Cr, Mn, Co, Cu and so on. For the first year of this project, we planned to analyze (n,p) and (n,α) reactions for 54,56 Fe and perform new measurements on those reactions for 58,60 Ni isotopes with the LENZ instrument at LANSCE. For improving our evaluation quality, we have studied reaction models to reproduce LANL’s experimental angular distributions and energy spectra using the full Hauser-Feshbach model code, CoH3 with no approximations used. As the first year’s deliverables, we provided the experimental (n,p) and (n,α) reaction cross sections for 54,56 Fe and incorporate new evaluation on angular distributions and energy spectra of neutron-induced charged particle reactions into the current ENDF/B-VIII.0.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of Nuclear Fuel Cycle Data

Electricity generated using nuclear power accounted for 18.9% of all electricity consumed in the United States in 2021, putting it in third place behind natural gas (38%) and coal (22%) power plants. Nuclear power plants boast a significantly higher uptime or capacity factor—90% and above—compared to 49.1% for coal fired power plants and 56.6% for natural gas power plants. Renewable energy sources, such as solar photovoltaic (PV) and wind electricity, have lower capacity factors: 24.9% and 36.3%, respectively. In addition, nuclear power is cleaner than both coal and natural gas fired power plants. With the passing of the 2022 Inflation Reduction Act, significant tax credits will be claimed by producers of hydrogen with well-to-gate greenhouse gas (GHG) emissions below 0.45 kg CO 2e /kg H 2 . This has sparked interest in using clean sources of electricity, including nuclear power, to generate H 2 via water electrolysis. As uranium is a primary fuel for modern nuclear power plants, the upstream emissions from nuclear fuel production greatly impact the GHG emissions related to all nuclear power end use. Therefore, it is important to accurately determine the upstream emissions associated with the nuclear fuel cycle of nuclear power production in the United States. In this analysis, the nuclear fuel cycle was separated into distinct steps to allow better understanding of the chemical and energy inputs at each step of the fuel cycle. This also provides details of the GHG emissions at each step in the nuclear fuel cycle. The transportation distance for each step of the fuel cycle was updated to account for the locations of uranium processing facilities along the supply chain of the current U.S. nuclear power plants. Finally, all the updated values were incorporated into Argonne National Laboratory’s Greenhouse Gases, Regulated Emissions, and Energy Use in Technologies (GREET) model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Progress on the R-matrix Analysis for the n+ 181 Ta Evaluation [Slides]

This presentation discusses how nuclear data evaluations can influence the accuracy of computational nuclear design calculations. It also discusses the motivation for a new evaluation of 181 Ta. The goals of the evaluations are to generate a set of resonance parameters in the Resolved Resonance Region (RRR) that extends up to 2.6 keV, to generate a set of average resonance parameters in the Unresolved Resonance Region (URR) up to 100 keV (derived from the RRR parameters), and to generate covariance information for both RRR and URR. The presentation discusses how several different experimental data sets will be fit simultaneously in the evaluation of 181 Ta. It states that the level density of 181 Ta can make R-matrix fitting a challenge as the width of the levels increase with energy (as well as decreasing experimental resolution) and the measured resonances can overlap. The presentation concludes by discussing R-matrix analysis and covariance information as the latter is important when propagated to quantify the uncertainty on output responses of nuclear design calculations such as the multiplication factor k .

07 ISOTOPE AND RADIATION SOURCES↗

International network of nuclear structure and decay data evaluators

Compilation, evaluation and dissemination of nuclear data are arduous tasks that rely on contributions from experts in both the basic and applied sciences communities whose efforts are coordinated by the International Atomic Energy Agency (IAEA). The Evaluated Nuclear Structure Data File (ENSDF) includes the most extensive and comprehensive set of nuclear structure and decay data evaluations performed by the international network of Nuclear Structure and Decay Data evaluators (NSDD) under the auspices of the IAEA. In this report we describe the recent NSDD activities supported by the IAEA and provide some future perspectives.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

CSEWG 2016 Minutes

The Cross Section Evaluation Working Group met November 14 - 16, 2016. Brief status reports are given on nuclear data activities at various DOE laboratories and universities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Application of the EPRI depletion reactivity benchmarks - 14423

The EPRI measured-based depletion reactivity benchmarks intend to facilitate the validation of burnup credit by validating the combined effect of changes in isotopic content and cross-sections. In the framework of burnup credit implementation for PWR fuels, this paper proposes to study the application of the EPRI benchmarks for a spent fuel pool criticality evaluation using the French tools: the DARWIN 2.2 depletion package and the CRISTAL V1 criticality safety package, both based on cross-section libraries from the JEF2.2 evaluation. For that purpose, the benchmarks are analyzed using the connection of DARWIN 2.2 with APOLLO2-MORET 4, allowing the determination of the bias for the reactivity decrement. Then, these results are used to define a bias to take into account in the criticality evaluation of a spent fuel pool. In addition, the benefit of the EPRI depletion reactivity benchmarks is assessed through a comparison with the validation approach adopted in France until now. The bias resulting from this latter approach is evaluated by 1) applying, to the calculated nuclides concentrations, isotopic penalizing factors derived from the comparison between calculated values of nuclide concentrations and experimental values obtained from used fuel chemical analyses from French reactors, 2) analyzing representative critical experiments. Additional analysis of the benchmarks using the connection of VESTA 2.1 with MORET 5 is performed as these codes allow calculations of complex 3D geometrical configurations and the use of various nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Modeling Proton- and Light Ion-Induced Reactions at Low Energies in the MARS15 Code

An implementation of both ALICE code and TENDL evaluated nuclear data library in order to describe nuclear reactions induced by low-energy projectiles in the Monte Carlo code MARS15 is presented. Comparisons between results of modeling and experimental data on reaction cross sections and secondary particle distributions are shown.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of B and W UO{sub 2}/ThO{sub 2} VIII Experimental Core: Criticality and Thermal Disadvantage Factor Analysis

In the framework of the OECD/NEA International Reactor Physics Experiment (IRPHE) Project, an evaluation of core VIII of the Babcock and Wilcox (B and W) Spectral Shift Control Reactor (SSCR), critical experiment program was performed. The SSCR concept, moderated and cooled by a variable mixture of heavy and light water, envisaged changing of the thermal neutron spectrum during the operation to encourage breeding and to sustain the core criticality. Core VIII contained 2188 fuel rods with 93% enriched UO{sub 2}-ThO{sub 2} fuel in a moderator mixture of heavy and light water. The criticality experiment and measurements of the thermal disadvantage factor were evaluated. Benchmark criticality results using different cross-section libraries are reported. ENDF/B-VI.6 calculation was run using the S(α, β) model based on ENDF/B-VI.3 data while ENDF/B-VII.0 and ENDF/BVII.1 used an S(α, β) model based on ENDF/B-VII.0 data. JEFF calculations were run using the S(α, β) model based on JEFF 3.1.1 data except for the aluminum isotope, for which the S(α, β) model was missing. The maximum absolute deviation from the benchmark model was obtained using the JEFF-3.1.1 cross sections while closer results were obtained using ENDF/ B-VII.0 and ENDF/B-VII.1. Only ENDF/B-VII.1 and ENDF/B-VII.0 results are inside the 3σ uncertainty band (+2.8σ and 2.4σ, respectively), having deviations on the order of 300 pcm. The maximum deviation is -827 pcm (-6.1σ), using JEFF.3.1.1. Sample calculations of the TDF benchmark were also performed, studying the effects of the main nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Evaluation of the Neutron Data Standards

With the need for improving existing nuclear data evaluations, (e.g., ENDF/B-VIII.0 and JEFF-3.3 releases) the first step was to evaluate the standards for use in such a library. This new standards evaluation made use of improved experimental data and some developments in the methodology of analysis and evaluation. In addition to the work on the traditional standards, this work produced the extension of some energy ranges and includes new reactions that are called reference cross sections. Since the effort extends beyond the traditional standards, it is called the neutron data standards evaluation. This international effort has produced new evaluations of the following cross section standards: the H(n,n), 6 Li(n,t), 10 B(n,α), 10 B(n,α 1 γ), nat C(n,n), Au(n,γ), 235 U(n,f) and 238 U(n,f). Also in the evaluation process the 238 U(n,γ) and 239 Pu(n,f) cross sections that are not standards were evaluated. Evaluations were also obtained for data that are not traditional standards: the Maxwellian spectrum averaged cross section for the Au(n,γ) cross section at 30 keV; reference cross sections for prompt γ-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 252 Cf spontaneous fission neutron spectrum and the 235 U prompt fission neutron spectrum induced by thermal incident neutrons; and the thermal neutron constants. The data and covariance matrices of the uncertainties were obtained directly from the evaluation procedure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NDMAS Overview

Overview of the Nuclear Data Management and Analysis System detailed as: Overview of NDMAS System, NDMAS NQA-1 process, Data in NDMAS, and Future work and new additions.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NJOY2012 - Current Status and Future Plans

An overview of the NJOY Nuclear Data Processing Code System, including recent history, current status and near-term upgrade plans is presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross sections of the {sup 67}Zn(n,{alpha}){sup 64}Ni reaction at 4.0, 5.0, and 6.0 MeV

Experimental cross section data of the {sup 67}Zn(n,{alpha}){sup 64}Ni reaction are very scanty because the residual nucleus {sup 64}Ni is stable and the commonly used activation method is not feasible. As a result, very large deviations (about 10 times) exist among different nuclear data libraries. In the present work, cross sections of the partial {sup 67}Zn(n,{alpha}{sub 0}){sup 64}Ni and total {sup 67}Zn(n,{alpha}){sup 64}Ni reactions are measured at neutron energies of 4.0 and 5.0 MeV for the first time, and those of 6.0 MeV are remeasured for consistency checking. A twin-gridded ionization chamber was used as the charged-particle detector and two enriched back-to-back-set {sup 67}Zn samples were adopted. Experiments were performed at the 4.5 MV Van de Graaff Accelerator of Peking University. Neutrons were produced through the {sup 2}H(d,n){sup 3}He reaction using a deuterium gas target. Absolute neutron flux was determined by counting the fission fragments from a {sup 238}U sample placed inside the gridded ionization chamber while a BF{sub 3} long counter was employed as neutron flux monitor. Present data are compared with results of previous measurements, evaluations, and talys code calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An Investigation of the Performance of the Unified Monte Carlo Method of Neutron Cross Section Data Evaluation

The Unified Monte Carlo method (UMC) has been suggested to avoid certain limitations and approximations inherent to the well-known Generalized Least Squares (GLS) method of nuclear data evaluation. This contribution reports on an investigation of the performance of the UMC method in comparison with the GLS method. This is accomplished by applying both methods to simple examples with few input values that were selected to explore various features of the evaluation process that impact upon the quality of an evaluation. Among the issues explored are: i) convergence of UMC results with the number of Monte Carlo histories and the ranges of sampled values; ii) a comparison of Monte Carlo sampling using the Metropolis scheme and a brute force approach; iii) the effects of large data discrepancies; iv) the effects of large data uncertainties; v) the effects of strong or weak model or experimental data correlations; and vi) the impact of ratio data and integral data. Comparisons are also made of the evaluated results for these examples when the input values are first transformed to comparable logarithmic values prior to performing the evaluation. Some general conclusions that are applicable to more realistic evaluation exercises are offered.

99 GENERAL AND MISCELLANEOUS↗