SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Two computer programs developed according to two general types of exponential models for conducting nonlinear exponential regression analysis are described. Least squares procedure is used in which the nonlinear problem is linearized by expanding in a Taylor series. Program is written in FORTRAN 5 for the Univac 1108 computer.
The possibility of using on-line signal statistics to detect electronic equipment nonlinearities is discussed. The results of an investigation using Gaussian statistics are presented, and a nonlinearity test that uses ratios of the moments of a Gaussian random variable is developed and discussed. An outline for further investigation is presented.
A computer-oriented technique is presented for performing a nonlinear exponential regression analysis on decay-type experimental data. The technique involves the least squares procedure wherein the nonlinear problem is linearized by expansion in a Taylor series. A linear curve fitting procedure for determining the initial nominal estimates for the unknown exponential model parameters is included as an integral part of the technique. A correction matrix was derived and then applied to the nominal estimate to produce an improved set of model parameters. The solution cycle is repeated until some predetermined criterion is satisfied.
A procedure cast in a form appropriate to the finite element method is presented for geometrically nonlinear prebuckling and postbuckling structural analysis, including the identification of snap-through type of buckling. The principal features of this procedure are the use of direct iteration for solution of the nonlinear algebraic equations in the prebuckling range, an interpolation scheme for determination of the initial bifurcation point, a perturbation method in definition of the load-displacement behavior through the postbuckling regime, and extrapolation in determination of the limit point for snap-through buckling. Three numerical examples are presented in illustration of the procedure and in comparison with alternative approaches.
A variety of techniques is available for estimating the states of nonlinear dynamic systems from noisy data. The differences among several of these procedures in the presence of small dynamic and observational nonlinearities are investigated. Four discrete estimation algorithms are analyzed. The first is a strictly least square estimator, while the others are recursive algorithms similar to the Kalman filter used for estimating the states of linear systems. A group of analytic expressions is developed for the mean and covariance of the error in each of these estimators so that they may be compared without lengthy Monte Carlo simulations. The covariance expressions show that, to first order, all the estimators have the same covariance. Expressions for the means show that each estimator has a different bias. Several examples are carried out demonstrating that the relative magnitudes of the bias errors in the various estimators can be a strong function of such parameters as initial covariances and number of data points. Under some circumstances, more complicated algorithms can have larger biases than smaller ones.
Axisymmetric responses are presented of a nonshallow thin-walled spherical shell on the basis of nonlinear bending theory. An ordinary differential equation with nonlinearity of quadratic as well as cubic terms associated with variable time is derived. The derivation is based on the assumption that the deflection mode is the sum of four Legendre polynomials, and the Galerkin procedure is applied. The equation is solved by asymptotic expansion, and a first approximate solution is adopted. Unstable regions of this solution are discussed.
In the investigation, the filtering problem is considered in the continuous time domain. The postulated simple suboptimal nonlinear filter structure closely parallels the structure of the Kalman-Bucy optimal linear filter algorithm. Two filter performance evaluation methods are developed based on the Kolmogorov equations for the transition density of Markov processes. The expansions in the approximations for the nonlinear system and observation functions are in effect carried out up to second-order terms in both methods. The description of the filter's performance is sought in terms of second-order statistics in both methods.
The stationary response of a lightly damped nonlinear oscillator subjected to wideband random excitation can be examined as an example of thermal equilibrium. It may be assumed that the response consists of a series of free-vibration cycles with small random fluctuations in phase and amplitude. Certain statistical properties of the response can be estimated by averaging corresponding properties of the free vibration with respect to cycle amplitude distributions. Such heuristic procedures for determining the expected frequency and the autocorrelation function of the stationary response are outlined. Some additional results concerning first-passage problems for nonlinear oscillators are included.
This paper presents an assessment of the solution procedures available for the analysis of inelastic and/or large deflection structural behavior. A literature survey is given which summarized the contribution of other researchers in the analysis of structural problems exhibiting material nonlinearities and combined geometric-material nonlinearities. Attention is focused at evaluating the available computation and solution techniques. Each of the solution techniques is developed from a common equation of equilibrium in terms of pseudo forces. The solution procedures are applied to circular plates and shells of revolution in an attempt to compare and evaluate each with respect to computational accuracy, economy, and efficiency. Based on the numerical studies, observations and comments are made with regard to the accuracy and economy of each solution technique.
The structure of strong plane shock waves in a perfect monatomic gas was studied using four nonlinear models of the Boltzmann equation. The models involved the use of a simplified collision operator with velocity-independent collision frequency, in place of the complicated Boltzmann collision operator. The models employed were the BGK and ellipsoidal models developed by earlier authors, and the polynomial and trimodal gain function models developed during the work. An exact set of moment equations was derived for the density, velocity, temperature, viscous stress, and heat flux within the shock. This set was reduced to a pair of coupled nonlinear integral equations and solved using specially adapted numerical techniques. A new and simple Gauss-Seidel iteration was developed during the work and found to be as efficient as the best earlier iteration methods.
Investigation of a stochastic projected gradient algorithm which can be used to find a constrained optimum point for a concave or convex objective function subject to nonlinear constraints. When the constraint consists of only one linear equation, convergence to the constrained optimum value is proven, and bounds are obtained for the rate of convergence of the algorithm to the constrained optimum value. This algorithm is then applied to the nonlinear problem of automatically making an array of detectors form a beam in a desired direction in space when unknown interfering noise is present so as to maximize the signal-to-noise ratio subject to a constraint on the supergain ratio.
The problem of real-time estimation of a lifting reentry vehicle trajectory of the shuttle orbiter type is considered. Simulations feature large position and velocity uncertainties at radar acquisition and realistic model errors in lift, drag and other model parameters. Radar tracking and accelerometer data are simulated. Significant nonlinearities are found to exist on spacecraft acquisition. An iterated nonlinear filter is shown to perform optimally during the radar acquisition phase. An adaptive filter is shown to track time-varying model errors, such as errors in the lift and drag coefficients, down to the noise level. Such real-time model tracking (identification) is frequently required for guidance and control implementation.
An application of the extended Kalman filter to delayed systems to estimate the state and time delay is presented. Two nonlinear estimators are discussed and the results compared with those of the Kalman filter. For all the filters considered, the hereditary system was treated with the delay in the pure form and by using Pade approximations of the delay. A summary of the convergence properties of the filters studied is given. The results indicate that the linear filter applied to the delayed system performs inadequately while the nonlinear filters provide reasonable estimates of both the state and the parameters.
A variety of techniques are available for estimating the states of nonlinear dynamic systems from noisy data. These procedures are generally equivalent when applied to linear systems. This paper investigates the difference between several of these procedures in the presence of small dynamic and observational nonlinearities. In particular, it examines one least square batch processing algorithm, and three recursive algorithms similar to the Kalman filter. To first order, all the estimators have the same covariance. Expressions for the means, however, show that each estimator has a different bias. The examples presented show that the biases can be a strong function of such parameters as initial covariances and number of data points being considered.
The problem of synthesizing nth order nonlinear nonautonomous networks with a prescribed small signal behavior is considered. It is shown that, in the absence of coupling elements, the solution of this problem reduces to synthesizing a set of first order nonlinear characteristics. These characteristics can then be determined using a recently developed generalized steepest descent criterion.
Utilizing stiffness matrices and supplying as input the loading and boundary conditions, program generates equilibrium equations for structure. Nonlinear strain energy terms result in pseudogeneralized forces which are combined with applied generalized forces. Resulting set of nonlinear algebraic equilibrium equations is solved by one of several methods.
A systematic method is proposed for the development, optimization, and comparison of controller-models for the human operator. This is suitable for any designed model, even multiparameter systems. A random search technique is chosen for the parameter optimization. As valuation criteria for the quality of the model development the criterion function - the comparison between the input and output functions of the human operator and those of the model - and the most important characteristic values and functions of the statistical signal theory are used. A nonlinear multiparameter model for the human operator is being designed which considers the complex input information rate per time in a single display. The nonlinear features of the model are effected by a modified threshold element and a decision algorithm. Different display-configurations as well as various transfer functions of the controlled element are explained by different optimized parameter-combinations.
Linear and nonlinear propagating characteristics of right-hand polarized, slow electromagnetic, magnetoplasma waves (whistlers) are discussed in terms of stability and dispersion. An analysis of the stability of whistlers propagating at an angle to the static magnetic field is presented. A new mechanism is derived for the onset of stimulated emissions, and modulational instability for nonlinear whistlers are discussed.