Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,243 records · Page 69

The Impact of Aluminum and Iron Substitution on the Structure and Electrochemistry of Li[Ni0.4Co0.2-yMyMn0.4]O2 Materials

Li[Ni0.4Co0.2-yMyMn0.4]O2 (0<_y<_0.2) (M=Al) and Li[Ni0.4Co0.15Fe0.05Mn0.4]O2 compounds were prepared in order to investigate the effect of replacement of all or part of the cobalt on the structural and electrochemical properties. The impact of substitution on the structure has been examined by both x-ray and neutron diffraction experiments. The incorporation of aluminum has minimal effect on the anti-site defect concentration, but leads to structural changes that affect electrochemical performance. The most important effect is an opening of the lithium slab dimension upon substitution, which results in improved rate performance compared to the parent compound. In contrast, the lithium slab dimension is not affected by iron substitution and no rate enhancement effect is observed. The cycling stability of aluminum containing materials is superior to both the parent material and iron-substituted materials.

25 ENERGY STORAGE↗

Transient Phase-Driven Cyclic Deformation in Additively Manufactured 15-5 PH Steel

The present work extends the examination of selective laser melting (SLM)-fabricated 15-5 PH steel with the 8%-transient-austenite-phase towards fully-reversed strain-controlled low-cycle fatigue (LCF) test. The cyclic-deformation response and microstructural evolution were investigated via in-situ neutron-diffraction measurements. The transient-austenite-phase rapidly transformed into the martensite phase in the initial cyclic-hardening stage, followed by an almost complete martensitic transformation in the cyclic-softening and steady stage. The compressive stress was much greater than the tensile stress at the same strain amplitude. The enhanced martensitic transformation associated with lower dislocation densities under compression predominantly governed such a striking tension-compression asymmetry in the SLM-built 15-5 PH.

15-5 PH stainless steel↗

Isotopic dependence of the frequency of optical vibrations in molybdenum monohydride

We show that it is currently known that three hydrides – PdH x , MoH x , and TiH x – exhibit an inverse isotope effect in superconductivity. Namely, the phase with a heavier hydrogen isotope, deuterium, has a higher critical temperature. Hydrides and deuterides of palladium have intensively been studied both experimentally and theoretically, but the origin of the isotope effect has not been established with certainty. The commonly accepted explanation is that the effect is likely to be due to the strong anharmonicity of the optical hydrogen vibrations, which was considered to be responsible for the large deviation of the ratio of the fundamental optical frequencies ω H /ω D = 1.51 from the harmonic value $\sqrt{2}$ ≈ 1.41. In the present paper, powder samples of MoH 1.1(1) and MoD 1.07(3) were synthesized under a hydrogen / deuterium pressure of several gigapascals and studied by inelastic neutron scattering (INS) at ambient pressure and T = 10 K. The INS study demonstrated that optical vibrations of H atoms in MoH 1.1 and D atoms in MoD 1.07 are harmonic and the ratio of fundamental optical frequencies ω H /ω D = 1.44 is close to the harmonic value $\sqrt{2}$ ≈ 1.41. This shows that anharmonicity is not a necessary condition for the presence of the inverse isotope effect. The MoD 1.07 sample was additionally studied by neutron diffraction (ND) at ambient pressure and T = 100 K. In agreement with previous ND results for MoH 1.2 , the ND study of MoD 1.07 showed that deuterium atoms occupied almost all octahedral interstitial sites in its hexagonal close-packed metal lattice and formed a NiAs-type crystal structure with the composition close to MoD. The overstoichiometric composition MoD 1.07 of the deuteride is likely to result from a small fraction D/Mo ~ 0.07 of deuterium atoms partially occupying the tetrahedral interstices.

36 MATERIALS SCIENCE↗

Phase transformations and magnetotransport properties of the Pr{sub 0.5}Sr{sub 0.5}Co{sub 1-x}Mn{sub x}O{sub 3} system

The structural, magnetic, and magnetotransport properties of Pr{sub 0.5}Sr{sub 0.5}Co{sub 1-x}Mn{sub x}O{sub 3} (x < 0.65) perovskites are studied by magnetization and electrical conductivity measurements in magnetic fields up to 14 T and by neutron diffraction. In the manganese concentration range x < 0.5 and T = 300 K, the crystal structure is described by monoclinic space group I2/a; at x > 0.5, it is described by orthorhombic space group Imma. When the temperature decreases, a structural transformation without changing the symmetry takes place in all compounds. This transformation is caused by an active role of the inner shells of the praseodymium ion in chemical bond formation. The substitution of manganese for cobalt breaks a long-range ferromagnetic order near x Almost-Equal-To 0.25, and a metal-dielectric transition occurs at x Almost-Equal-To 0.15. The negative magnetoresistance is found to be maximal near a critical manganese concentration, where a long-range magnetic order is broken; it reaches 95% in a field of 14 T at T = 10 K for x = 0.2. An unusual dielectric magnetic state with a small spontaneous magnetic moment and a sharp transition into a paramagnetic state at T > 200 K is revealed in the concentration range 0.30 {<=} x {<=} 0.65 in spite of the absence of coherent magnetic neutron scattering. A model is proposed to explain the behavior of the magnetic properties in this phase.

36 MATERIALS SCIENCE↗

Insights into the structure of mixed CO 2 /CH 4 in gas hydrates

The exchange of carbon dioxide for methane in natural gas hydrates is an attractive approach to harvesting CH 4 for energy production while simultaneously sequestering CO 2 . In addition to the energy and environmental implications, the solid solution of clathrate hydrate (CH 4 ) 1-x (CO 2 ) x ·5.75H 2 O provides a model system to study how the distinct bonding and shapes of CH 4 and CO 2 influence the structure and properties of the compound. In this paper, high-resolution neutron diffraction was used to examine mixed CO 2 /CH 4 gas hydrates. CO 2 -rich hydrates had smaller lattice parameters, which were attributed to the higher affinity of the CO 2 molecule interacting with H 2 O molecules that form the surrounding cages, and resulted in a reduction in the unit-cell volume. Experimental nuclear scattering densities illustrate how the cage occupants and energy landscape change with composition. Finally, these results provide important insights on the impact and mechanisms for the structure of mixed CH 4 /CO 2 gas hydrate.

54 ENVIRONMENTAL SCIENCES↗

Measurement of elastic constants of monoclinic nickel-titanium and validation of first principles calculations

Polycrystalline, monoclinic nickel-titanium specimens were subjected to tensile and compressive deformations while neutron diffraction spectra were recorded in situ. Using these data, orientation-specific and macroscopic Young's moduli are determined from analysis of linear-elastic deformation exhibited by 13 unique orientations of monoclinic lattices and their relationships to each macroscopic stress and strain. Five of 13 elastic compliance constants are also identified: s{sub 11} = 1.15, s{sub 15} = -1.10, s{sub 22} = 1.34, s{sub 33} = 1.06, s{sub 35} = -1.54, all Multiplication-Sign 10{sup -2} GPa{sup -1}. Through these results, recent atomistic calculations of monoclinic nickel-titanium elastic constants are validated.

36 MATERIALS SCIENCE↗

Magnetization-steps in Y₂CoMnO₆ double perovskite: The role of antisite disorder

Antisite disorder is observed to have significant impact on the magnetic properties of the double perovskite Y²CoMnO₆ which has been recently identified as a multiferroic. A paramagnetic-ferromagnetic phase transition occurs in this material at T c ≈ 75 K. At 2 K, it displays a strong ferromagnetic hysteresis with a significant coercive field of H c ≈ 15 kOe. Sharp steps are observed in the hysteresis curves recorded below 8 K. In the temperature range 2 K ≤ T ≤ 5 K, the hysteresis loops are anomalous as the virgin curve lies outside the main loop. The field-cooling conditions as well as the rate of field-sweep are found to influence the steps. Quantitative analysis of the neutron diffraction data shows that at room temperature, Y₂CoMnO₆ consists of 62% of monoclinic P2₁/n with nearly 70% antisite disorder and 38% Pnma. The bond valence sums indicate the presence of other valence states for Co and Mn which arise from disorder. We explain the origin of steps by using a model for pinning of magnetization at the antiphase boundaries created by antisite disorder. The steps in magnetization closely resemble the martensitic transformations found in intermetallics and display first-order characteristics as revealed in the Arrott's plots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural analyses of amorphous calcium carbonate before and after removing strontium ions from an aqueous solution

Amorphous calcium carbonate (ACC) is a precursor of crystalline calcium carbonate; hence, its structural information at the atomic level is very important for controlling the morphology of crystalline calcium carbonate. In this study, we attempted to elucidate the process of Sr extraction from aqueous solution by using ACC for the purpose of removal of radioactive Sr from the contaminated water leaked after the Fukushima Daiichi nuclear accident. Here, the pair distribution functions, g(r) obtained by X-ray and neutron diffraction (ND) measurements show that ACC has a structure partially similar to that of monohydrocalcite, suggesting that ACC is transferred to the crystalline calcium carbonate starting from its crystal nucleus. Rietveld analysis of the ND data showed that the ACC that removed Sr was crystallized to calcite. However, the Sr–O coordination analyzed using extended X-ray absorption fine structure (EXAFS) implies that the local environment of O around Sr is similar to that in crystalline calcium carbonate aragonite.

36 MATERIALS SCIENCE↗

Characterization of microstructure and residual stress following the friction stir welding of dissimilar aluminum alloys

Friction-stir-welding (FSW) has gained importance as an effective way to join dissimilar materials due to its solid-state nature. However, FSW produces substantial residual stresses in aluminum welding, often deteriorating the component's structural performance and reliability. In the current study, the d-spacing (inter-atomic distance) of several locations on a battery tray and stress-free reference samples are measured with neutron diffraction to calculate the residual stresses in a lap 6061 to A365 dissimilar friction-stir-weld. Furthermore, the present study connects the measured residual stress to microstructure properties through electron backscatter diffraction (EBSD) and optical microscopy analyses. The EBSD results indicate that the FSW operation affects the grains’ orientation, thereby producing location-specific directionally varying elasticity across the weldment. Further, this varied elasticity creates unique d-spacing profiles even in the stress-free material. Additionally, the resulting stressed and stress-free d-spacing profiles show dependencies on the FSW tool geometry, traverse direction, and rotational direction. Lastly, this study suggests that the final component residual stress can be influenced by the sequence of multi-pass welds contributing to a rise in temperature in the presence of a completed weld relaxing its residual stress.

36 MATERIALS SCIENCE↗

Collapse and reappearance of magnetic orderings in spin frustrated TbMnO{sub 3} induced by Fe substitution

We studied the temperature dependent magnetic phase evolution in spin frustrated TbMnO{sub 3} affected by Fe doping via powder neutron diffraction. With the introduction of Fe (10% and 20%), the long range incommensurate magnetic orderings collapse. When the Fe content is increased to 30%, a long-range antiferromagnetic ordering develops, while a spin reorientation transition is found near 35 K from a canted G-type antiferromagnetic ordering to a collinear G-type antiferromagnetic ordering. This work demonstrates the complex magnetic interactions existing in transition metal oxides, which helps to understand the frustrated spin states in other similar systems and design magnetic materials as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spontaneous formation of an exchange-spring composite via magnetic phase separation in Pr{sub 1-x}Ca{sub x}CoO{sub 3}.

We present a neutron-diffraction, small-angle scattering, and magnetometry study of the narrow bandwidth perovskite cobaltite Pr{sub 1-x}Ca{sub x}CoO{sub 3}, demonstrating an unusual form of magnetoelectronic phase separation where long-range ordered ferromagnetism coexists spatially with short-range ferromagnetism. The two phases have very different coercivities and, remarkably, are strongly exchange coupled. The electronic phase separation thus leads to spontaneous formation of a hard-soft nanocomposite, exhibiting prototypical exchange-spring behavior in the absence of chemical interfaces.

36 MATERIALS SCIENCE↗

Electric-Field Manipulation of Magnetic Chirality in a Homo-Ferro-Rotational Helimagnet

Ferro-rotational (FR) materials, renowned for their distinctive material functionalities, present challenges in the growth of homo-FR crystals (i.e., single FR domain). This study explores a cost-effective approach to growing homo-FR helimagnetic RbFe(SO 4 ) 2 (RFSO) crystals by lowering the crystal growth temperature below the T FR threshold using the high-pressure hydrothermal method. Through polarized neutron diffraction experiments, it is observed that nearly 86% of RFSO crystals consist of a homo-FR domain. Notably, RFSO displays remarkable stability in the FR phase, with an exceptionally high T FR of ≈573 K. Furthermore, RFSO exhibits a chiral helical magnetic structure with switchable ferroelectric polarization below 4 K. Importantly, external electric fields can induce a single magnetic domain state and manipulate its magnetic chirality. The findings suggest that the search for new FR magnets with outstanding material properties should consider magnetic sulfates as promising candidates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In situ investigation of stress-induced martensitic transformation in granular shape memory ceramic packings

Stress-induced martensitic transformation can occur in granular shape memory materials when individual particles experience high stresses and transform from a high-symmetry austenite phase to a low-symmetry martensite phase. This involves a highly heterogeneous distribution of the driving force and very low mechanical constraint for martensite nucleation, so the transformation behavior can be dramatically different from the well-documented case of monolithic solids. In this work, we investigate the stress-induced martensitic transformation in granular shape memory ceramic packings, which consist of single-crystal micro-particles of ZrO 2 -12 at%CeO 2 and ZrO 2 -15 at%CeO 2 . Using in situ neutron diffraction, we study how the phase fraction, lattice strain, and integral peak broadness evolve during external loading, unloading, and subsequent heating. Several peculiar features are discovered, including (i) a continuous mode of transformation with a wide range of transformation loads, (ii) co-evolution of the packing structure, contact deformation, and martensitic transformation, and (iii) a strong correlation between the peak broadening and the transformed phase fraction. In addition, we show the first direct evidence of reversible stress-induced martensitic transformation in granular materials. We additionally discuss the mechanism for martensite nucleation and growth in granular packings and show how that leads to the observed transformation characteristics.

36 MATERIALS SCIENCE↗

Lattice and magnetic structure in the van der Waals antiferromagnet VBr 3

Here, we report a comprehensive investigation of the lattice and magnetic structure in van der Waals antiferromagnet VBr 3 , characterized by a BiI 3 -type structure at room temperature. Neutron diffraction experiments were performed on both polycrystalline and single-crystalline VBr 3 samples, revealing clear magnetic Bragg peaks emerging below the Néel temperature of T N =26.5 K. These magnetic Bragg peaks can be indexed by k=(0, 0.5, 1) in hexagonal notation. Our refinement analysis suggests that the antiferromagnetic order in VBr 3 manifests as a zigzag structure. Moreover, we observed peak splitting for nuclear Bragg peaks in the HK plane below the structure transition temperature of T S =90.4 K, indicating the breaking of threefold symmetry within the ab plane.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of the concentration of Sr ions on the crystal and magnetic structures of Ba{sub 2} –{sub x}Sr{sub x}FeMoO{sub 6} double perovskites (x = 0–1.6)

The crystal and magnetic structures of a solid solution of double perovskite Ba{sub 2–} {sub x}Sr{sub x}FeMoO{sub 6} (x = 0–1.6) have been investigated by neutron diffraction. The high-resolution diffraction patterns have provided precise information about the changes in the crystal and magnetic structures with an increase in the strontium content and data on the behavior of the sample microstructure. Replacement of barium with strontium leads to a change in the lattice symmetry from cubic (x = 0, sp. gr. Fm3̄m)) to tetragonal (x = 0.4, sp. gr. I4/m). At x = 1.0, the symmetry is either tetragonal (sp. gr. I4/m) or orthorhombic (sp. gr. Fmmm), and at x = 1.6 the symmetry becomes again tetragonal (sp. gr. I4/m). The values of the Curie temperature and microstrain increase with an increase in the strontium content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Load partitioning between the bcc-iron matrix and NiAl-type precipitates in a ferritic alloy on multiple length scales

An understanding of load sharing among constituent phases aids in designing mechanical properties of multiphase materials. Here we investigate load partitioning between the body-centered-cubic iron matrix and NiAl-type precipitates in a ferritic alloy during uniaxial tensile tests at 364 and 506 C on multiple length scales by in situ neutron diffraction and crystal plasticity finite element modeling. Our findings show that the macroscopic load-transfer efficiency is not as high as that predicted by the Eshelby model; moreover, it depends on the matrix strain-hardening behavior. We explain the grain-level anisotropic load-partitioning behavior by considering the plastic anisotropy of the matrix and elastic anisotropy of precipitates. We further demonstrate that the partitioned load on NiAl-type precipitates relaxes at 506 C, most likely through thermally-activated dislocation rearrangement on the microscopic scale. Furthermore, the study contributes to further understanding of load-partitioning characteristics in multiphase materials.

36 MATERIALS SCIENCE↗

Liquid structure and temperature invariance of sound velocity in supercooled Bi melt

Structural rearrangement of liquid Bi in the vicinity of the melting point has been proposed due to the unique temperature invariant sound velocity observed above the melting temperature, the low symmetry of Bi in the solid phase and the necessity of overheating to achieve supercooling. The existence of this structural rearrangement is examined by measurements on supercooled Bi. The sound velocity of liquid Bi was measured into the supercooled region to high accuracy and it was found to be invariant over a temperature range of ∼60°, from 35° above the melting point to ∼25° into the supercooled region. The structural origin of this phenomenon was explored by neutron diffraction structural measurements in the supercooled temperature range. These measurements indicate a continuous modification of the short range order in the melt. The structure of the liquid is analyzed within a quasi-crystalline model and is found to evolve continuously, similar to other known liquid pnictide systems. The results are discussed in the context of two competing hypotheses proposed to explain properties of liquid Bi near the melting: (i) liquid bismuth undergoes a structural rearrangement slightly above melting and (ii) liquid Bi exhibits a broad maximum in the sound velocity located incidentally at the melting temperature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗